Floral wall in the bathroom. Layout of tiles in the bathroom (52 ​​photos): good examples. Bathroom color scheme

Most often, the bathroom is tiled. This material is durable, hygienic, easy to clean. But the cost of such repairs is considerable, so they try to arrange everything so that the bathroom looks the best for a long period of time. To solve this problem, a collection is carefully chosen, colors are selected, and a layout method is selected. About what options for laying tiles in the bathroom exist, how they are perceived - in the article.

General principles and rules

Everyone knows that light walls visually make the room more spacious. Nobody is going to argue with this, and this fact is taken into account when choosing options for laying tiles in the bathroom. But there are a few more interesting points, the knowledge of which will help to avoid mistakes when drawing up the layout and selecting the color of the tile, its location, and the color of the grout.

Vertical and horizontal layout

Recently, rectangular tiles have been more often placed on the walls. At the same time, the first thing to be determined is whether to place the tiles horizontally or vertically on the walls. It is believed that the horizontal layout visually makes the room wider, and the vertical one - higher. In fact, on colored, bright tiles, the seams between which are sealed with grout of the same or a similar color, the difference is very slight (in the photo there are a couple of drawings below). In this case, the laying direction has almost no effect on perception. In this case, you can choose the options for laying tiles in the bathroom based only on your preferences.

This effect is more pronounced when using light-colored tiles with contrasting grout (upper pictures). In this case, the eye “slides” along the seams, creating the desired visual changes. In this case, the vertical or horizontal layout really affects our perception.

Guide strips

To expand the room or raise the ceiling, when choosing the layout, vertical or horizontal "guides" are made. These are stripes of tiles of a different color, along which the eye glides. These stripes change the visual perception of the size of the room.

A lighter horizontal strip, which runs along the perimeter of the room approximately in the middle of the height, visually significantly expands the space. If a dark stripe is added to light walls, no effect is observed. Rather, the room will look at its “own” volume, since the dark strip neutralizes the visual increase in space due to light colors in the decoration.

If necessary, make the ceiling visually higher, with a vertical layout, you can lay out a strip of lighter tiles on one of the walls (preferably opposite the entrance). Even with bright or dark tiles and matching grout, the ceiling will “lift up”. If on this wall you use a tile of a lighter tone, and even with a contrasting grout and a vertical strip of tiles with an ornament, the effect will be even more pronounced (in the figure below on the right).

Border

Another way to make the room look taller is to place decorative tiles in the form of a border closer to the ceiling. Being high, they attract attention, while the room seems higher. The border does not have to be done around the perimeter. It is enough to make one wall of a different light shade, place a border at the top. Moreover, this contrasting wall can be darker or lighter.

All these techniques are not difficult to implement, but they help to correctly compose the layout of the tiles. To visualize what you get, you can use .

Tile layout examples

In addition to the layout examples above, there are tile laying options that can be considered classics, others, on the contrary, have appeared quite recently and, although they often go against many recommendations, they look very good.

Darker bottom

This technique belongs to the classics: the lower third of the wall is made darker, the upper one is several tones lighter. This method of laying ceramic tiles, to put it mildly, is not at the peak of popularity. It was popular about a decade ago. But there are a few tricks that give the classics a modern sound.

With this method of laying tiles, the room seems spacious, since most of the walls are decorated in light shades. In this case, the tiles on the floor are chosen in the same color as the tiles on the bottom of the wall. If you can’t pick up exactly the same, they are looking for a very close one in texture and color. In its “pure” form, this way of laying tiles does not look very modern.

To make this bathroom tile look more modern, you can add vertical or horizontal stripes to break up the monotonous design. Many collections offer not only darker and lighter tile options, but also decor of different sizes, from which strips of different widths are formed.

More often, not two, but three types of tiles are combined: two plain and decor that combines both primary colors. Decorative elements can be of different widths. Then from them you can make strips or columns of different widths. To prevent the upper part from being so monotonous and boring, thin stripes of the same color as the lower part of the wall are added, and a floral or floral border is added below.

Most factories produce collections in which there are two basic colors of tiles - darker and lighter - and a set of decorative elements. Such collections are usually not cheap, but it is easier to make a competent composition from them, and they are suitable in size, so there will be no problems with styling and fitting.

accent wall

If the division of the walls by height does not appeal to you, but the monochromatic design inspires despondency, you can consider the option with an accent wall. Most often, it is decorated with tiles of the same color, but of a different shade - several tones lighter or darker than the main one.

In this case, not one wall is trimmed with brown tiles, but it also comes into part of the neighboring one. This technique is suitable for narrow long rooms - it visually makes the room look more like a square.

The accent wall does not have to be tiled the same size. One wall decorated with mosaics or small format tiles looks great.

Mosaic looks great both on its own and in combination with tiles of different sizes - square, rectangular, large and medium. It is used when finishing curved surfaces - due to its structure, it fits even columns of a small radius.

Floral motifs

Recent design trends have resulted in most bathroom tiles being plain. Many collections are distinguished by an interesting texture, but are made in the form of monochromatic fragments. Not everyone likes this design - the interior turns out to be too “cold”. You can add fantasy with tiles with flowers or butterflies, floral or geometric motifs.

But with this type of decor you have to be careful: it's too easy to "overdo it" especially in a small volume. But a few single fragments also do not look good. So it is advisable to work with floral decor in programs that give a three-dimensional picture - it will be easier to imagine what you actually get.

Laying tiles on the floor

In addition to choosing options for laying tiles in the bathroom on the walls, you need to decide how to decorate the floor.

When using a square tile, it is usually laid in the form of a checkerboard (checker pattern), a method with an offset of 1/2 tile can be used. There are two laying directions - parallel to the walls and diagonally.

If a rectangular tile is selected, there are more layout options - with an offset (deck, wicker, herringbone). There are also options for a combination of rectangular and square tiles - a labyrinth, if methods using fragments of different sizes.

Options for laying tiles in the bathroom on the floor - different sizes and patterns

It makes sense to implement all more or less complex schemes in large rooms - here unusual compositions can be appreciated. In small bathrooms, the simplest schemes are most often chosen - usually only a few tiles are placed, so there is simply no point in complicating the work.

The accent wall in the interior has become a classic technique of modern designers. Arranging the right accents in a room by highlighting one wall with a color or texture is an easy way to create a special, unique living space.

However, the design of the accent wall has its own subtleties and rules. If you want to know how to correctly focus on the wall, "Dream House" will help you sort out this issue.

Creating an accent wall: simple rules

An accent wall can solve quite a few problems when decorating a room, if you properly use the basic techniques of building an interior design. To focus on the wall, which can not only attract attention, but also improve the design of the room, the following rules will help:

  • the accent wall in the room should be one, very rarely - two. But you should never make three accents on the walls at once - this will bring dissonance to the room and will look grotesque;
  • you can select only part of one of the walls, or even focus exclusively on the architectural elements of the wall: arches and;
  • you can build an interior with an accent wall both on color contrast and on a softer combination of tones, depending on the desired effect;
  • using warm and cold shades, you can visually both bring the accented wall closer and visually move it away;
  • accent wall is an excellent option for. With this simple technique, you can designate a seating area in the living room or separate the dining area from the kitchen;
  • do not forget that the emphasis on one wall sets the tone for the entire interior, and it is this designer's decision that can finally balance the design of the room.

Accent wall: interesting solutions and basic techniques

The possibilities of the modern world when designing an interior, including an accent wall, are truly endless. However, there are always tricks that are used most often.

Colour

It can be both contrasting with the main shade of the room, and consonant with it. Often this technique is used when painting a room with paint or wallpapering.

Texture

The accent wall can be in the same color scheme as the rest of the room's walls, but be decorated with 3D panels, wood, artificial stone, brickwork, mosaics, or something else that is opposite in texture to the rest of the room's walls.

Emphasis on the wall behind the head of the bed

print

The color of the room can be identical or different on each of the walls, but one of them - the one on which the emphasis is placed, is decorated with an active print using wallpaper, a specific pattern,. Sometimes a graphic drawing is created on one of the walls.

decorative elements

You can create an accent on one or two walls without starting repairs - just decorate the desired walls with interior decor elements. Frames, baguettes, rosettes, photographs, plates, bamboo elements, or soft panels are suitable for this - anything you like!

Wall mural and vinyl stickers

Accent wall behind headboard

Focus on the wall behind the headboard

Accent on the wall behind the headboard photo

In the kitchen

Which walls in the kitchen room are reasonable to make the leading ones? Of course, this is a working area - a kitchen apron that can act as an accent wall in the kitchen, drawing increased attention to the cooking area.

However, this technique has already bored the designers, and more and more accent walls are used to draw attention to the dining area.

Accent wall in the kitchen photo

The photo shows a bathroom with dark walls. White ceiling, light tiles, glass and mirrors soften the luxury of black wallpaper with an embossed pattern.

Pros and cons of decorating bathroom walls with wallpaper

Advantages:

  • a large selection of patterns, colors and textures from manufacturers;
  • originality of finishing, possibility of combination with other materials;
  • you can wallpaper the walls yourself without the involvement of specialists;
  • profitability (when buying materials, you can reduce the number of purchased tiles);
  • easy to change when changing the style of the bathroom;
  • easy dismantling, unlike tiles;
  • the ability to choose special wallpapers that are resistant to moisture.

In the photo, pastel wallpapers with a bright pattern are combined with decorative bricks and set the mood in a white bathroom.


Disadvantages of finishing the bathroom with wallpaper with the wrong selection:

  • high hygroscopicity (absorption of vapors and swelling);
  • with poor ventilation, mold may appear;
  • ordinary wallpaper glue, after getting wet, quickly loses its properties, does not protect against fungus.

In the photo, a classic-style bathroom is covered with wallpaper with an ornament. This performance is possible with good ventilation.

What kind of wallpaper can be glued in the bathroom?

Moisture resistant wallpaper for the bathroom must comply with the most important indicator that you should pay attention to, this is low hygroscopicity (the ability of the material not to absorb moisture). Moisture resistant can be considered those on which the manufacturer gives one of the markings depicting waves from one to three, where the more waves, the higher the moisture resistance.

Washable wallpaper for the bathroom is one of the economical options for wall decoration. They are protected by a special outer layer that prevents moisture from penetrating into the remaining layers. They do not swell or delaminate, resistant to changes in humidity, washing with a damp sponge and removing dirt from the surface.

Liquid wallpaper in the bathroom is applied like plaster, which is based on fabric fibers, glitter and adhesive mixture. Since liquid wallpaper has a water base, after hardening on the wall they need to be covered with acrylic varnish (this will preserve the wallpaper and give protection from moisture). They are interesting in the variety of the final result and the ability to mix different textures. The result will be unique.

Vinyl wallpaper for the bathroom is a common look when choosing a material for decoration. The top layer consists of a polymer that protects deep layers from steam, temperature drops, and also withstands contact with water, which does not affect the service life and decorative features.

Their minus is the high cost, which is justified by the expected quality. When using special glue, you can increase the level of fixation. For the bathroom, it is better to choose non-woven vinyl, which has an additional opaque layer.

Self-adhesive wallpaper for the bathroom are made of a film that repels water and does not absorb moisture. A layer of glue is already applied to them, so an additional purchase of an adhesive mixture is not needed.

In the photo, wall decoration with self-adhesive wallpaper under the texture of natural stone. They consist of a film and are not afraid of moisture, which is important for the bathroom.

Glass fiber is made of fiberglass and impregnated with a starch agent. Do not absorb moisture, durable, environmentally friendly, can be repainted up to 25 times with latex paint, which is a special advantage.

Wall murals will decorate the bathroom wall, provided that they are not located near the shower room and are made of durable material (they must not be afraid of moisture). It is best to choose a water plot: river, aquarium, beach, ships, seabed).

In the photo, the sink is protected by a glossy plain mosaic, and the free wall imitates tree trunks. The picture of the photo wallpaper can be varied, the main thing is that it should be combined with the concept of the bathroom.

Wallpaper color selection

The use of wallpaper in a wet room always involves a combination with plaster or tiles, so it is important to correctly combine these types of finishes in color and texture.

  • Wallpaper in the design of the bathroom should be combined with the overall style, from the color palette you should pay attention to shades of blue and green, which create the effect of purity.
  • In small bathrooms, it is better to give up deep shades of red, blue and black.
  • Beige and nude shades are suitable for a classic style, white glass wallpapers are suitable for high-tech, for Provence - with a small floral print or vertical stripes.
  • For medium to large rooms, yellow and orange colors are suitable, which will bring energy and light (in a small bathroom, you can limit yourself to bright objects against pastel walls).

3D or photo wallpapers should occupy the entire wall, they should not be interfered with by shelves, pipes and other equipment. If the dimensions do not allow, then let it be a small picture or panel canvases in two parts.

Where can wallpaper be hung?

You can wallpaper the walls at the sink, washing machine, toilet and walls inaccessible to spray. It is better to tile the wall near the bathroom or shower room with antifungal glue or putty. If there are free remnants of the material, they can diversify plain wallpaper by inserting them into a frame.

The photo shows an example of a successful and correct combination of two types of finishes in color and texture: vinyl wallpaper at the sink and tiles in the shower and toilet.

The photo shows a black and white design, with white dominance. The tile protects the bathroom and shower area, and there is a realistic sized wallpaper pasted all around.

Photo examples of bathroom wallpaper design

Below are photos of bathroom decoration with wallpaper of different styles, options for combining them with the design concept and functionality of the room.

Most often, the bathroom is tiled. This material is durable, hygienic, easy to clean. But the cost of such repairs is considerable, so they try to arrange everything so that the bathroom looks the best for a long period of time. To solve this problem, a collection is carefully chosen, colors are selected, and a layout method is selected. About what options for laying tiles in the bathroom exist, how they are perceived - in the article.

General principles and rules

Everyone knows that light walls visually make the room more spacious. Nobody is going to argue with this, and this fact is taken into account when choosing options for laying tiles in the bathroom. But there are a few more interesting points, the knowledge of which will help to avoid mistakes when drawing up the layout and selecting the color of the tile, its location, and the color of the grout.

Vertical and horizontal layout

Recently, rectangular tiles have been more often placed on the walls. In this case, the first thing you have to decide is to place the tiles horizontally or vertically on the walls. It is believed that the horizontal layout visually makes the room wider, and the vertical one - higher. In fact, on colored, bright tiles, the seams between which are sealed with grout of the same or a similar color, the difference is very slight (in the photo there are a couple of drawings below). In this case, the laying direction has almost no effect on perception. In this case, you can choose the options for laying tiles in the bathroom based only on your preferences.

This effect is more pronounced when using light-colored tiles with contrasting grout (upper pictures). In this case, the eye “slides” along the seams, creating the desired visual changes. In this case, the vertical or horizontal layout really affects our perception.

Guide strips

To expand the room or raise the ceiling, when choosing the layout, vertical or horizontal "guides" are made. These are stripes of tiles of a different color, along which the eye glides. These stripes change the visual perception of the size of the room.

A lighter horizontal strip, which runs along the perimeter of the room approximately in the middle of the height, visually significantly expands the space. If a dark stripe is added to light walls, no effect is observed. Rather, the room will look at its “own” volume, since the dark strip neutralizes the visual increase in space due to light colors in the decoration.

If necessary, make the ceiling visually higher, with a vertical layout, you can lay out a strip of lighter tiles on one of the walls (preferably opposite the entrance). Even with bright or dark tiles and matching grout, the ceiling will “lift up”. If on this wall you use a tile of a lighter tone, and even with a contrasting grout and a vertical strip of tiles with an ornament, the effect will be even more pronounced (in the figure below on the right).

Border

Another way to make the room look taller is to place decorative tiles in the form of a border closer to the ceiling. Being high, they attract attention, while the room seems higher. The border does not have to be done around the perimeter. It is enough to make one wall of a different light shade, place a border at the top. Moreover, this contrasting wall can be darker or lighter.

All these techniques are not difficult to implement, but they help to correctly compose the layout of the tiles. To visualize what you get, you can use special programs.

Tile layout examples

In addition to the layout examples above, there are tile laying options that can be considered classics, others, on the contrary, have appeared quite recently and, although they often go against many recommendations, they look very good.

Darker bottom

This technique belongs to the classics: the lower third of the wall is made darker, the upper one is several tones lighter. This method of laying ceramic tiles, to put it mildly, is not at the peak of popularity. It was popular about a decade ago. But there are a few tricks that give the classics a modern sound.

With this method of laying tiles, the room seems spacious, since most of the walls are decorated in light shades. In this case, the tiles on the floor are chosen in the same color as the tiles on the bottom of the wall. If you can’t pick up exactly the same, they are looking for a very close one in texture and color. In its “pure” form, this way of laying tiles does not look very modern.

To make this bathroom tile look more modern, you can add vertical or horizontal stripes to break up the monotonous design. Many collections offer not only darker and lighter tile options, but also decor of different sizes, from which strips of different widths are formed.

More often, not two, but three types of tiles are combined: two plain and decor that combines both primary colors. Decorative elements can be of different widths. Then from them you can make strips or columns of different widths. To prevent the upper part from being so monotonous and boring, thin stripes of the same color as the lower part of the wall are added, and a floral or floral border is added below.

Most factories produce collections in which there are two basic colors of tiles - darker and lighter - and a set of decorative elements. Such collections are usually not cheap, but it is easier to make a competent composition from them, and they are suitable in size, so there will be no problems with styling and fitting.

accent wall

If the division of the walls by height does not appeal to you, but the monochromatic design inspires despondency, you can consider the option with an accent wall. Most often, it is decorated with tiles of the same color, but of a different shade - several tones lighter or darker than the main one.

In this case, not one wall is trimmed with brown tiles, but it also comes into part of the neighboring one. This technique is suitable for narrow long rooms - it visually makes the room look more like a square.

The accent wall does not have to be tiled the same size. One wall decorated with mosaics or small format tiles looks great.

Mosaic looks great both on its own and in combination with tiles of different sizes - square, rectangular, large and medium in size. It is used when finishing curved surfaces - due to its structure, it fits even columns of a small radius.

Floral motifs

Recent design trends have resulted in most bathroom tiles being plain. Many collections are distinguished by an interesting texture, but are made in the form of monochromatic fragments. Not everyone likes this design - the interior turns out to be too “cold”. You can add fantasy with tiles with flowers or butterflies, floral or geometric motifs.


But with this type of decor you have to be careful: it's too easy to "overdo it" especially in a small volume. But a few single fragments also do not look good. So it is advisable to work with floral decor in programs that give a three-dimensional picture - it will be easier to imagine what you actually get.

Laying tiles on the floor

In addition to choosing options for laying tiles in the bathroom on the walls, you need to decide how to decorate the floor.

When using a square tile, it is usually laid in the form of a checkerboard (checker pattern), a method with an offset of 1/2 tile can be used. There are two laying directions - parallel to the walls and diagonally.

If a rectangular tile is selected, there are more layout options - with an offset (deck, wicker, herringbone).

There are also options for a combination of rectangular and square tiles - a labyrinth, if methods using fragments of different sizes.

It makes sense to implement all more or less complex schemes in large rooms - here unusual compositions can be appreciated. In small bathrooms, the simplest schemes are most often chosen - usually only a few tiles are placed, so there is simply no point in complicating the work.

More options

In the bathroom, decorative tiles are often used as the most practical, economical, inexpensive material with a huge selection of colors, textures and shapes. It can be used both on the floor and for wall decoration. With this finishing material, you can create any design, depending on the style that you want to implement.

Today, there is a tile layout in the bathroom in a large number of different options. Experienced craftsmen know many ways. But most of them are used 3-4. In the article, we will figure out what are the ways of laying out tiles in the bathroom, what are their advantages and disadvantages, what kind of design they allow.

Pros of using tiles in the bathroom

Why most bathroom owners prefer to decorate these rooms with ceramic tiles:

  • The material is very practical. Horizontal and vertical tiles are moisture resistant, long lasting and easy to clean.
  • A large selection of colors, sizes, textures allows you to experiment with design, finding the right combination of shades, to implement any decor ideas, even in a small bathroom. For example, a design with black and white tiles in the form of a chessboard is very popular.
  • Many options for tile layouts make it possible to combine different colors, thus achieving the individuality of the room, making it an original, author's work. There is an individual layout scheme for each interior in the bathroom.

Options

What are the most popular layouts of tiled and ceramic material in the bathroom on the floor and walls today:

Standard without offset

This is the most popular layout plan. In Soviet times, all bathrooms in new buildings were finished this way, so for many, this layout causes an instinctive visual rejection. Her example in that performance can still be seen in the apartments of the elderly. However, if it is implemented using large tiles, then the standard layout without offset looks quite stylish and original.

Diamond laying

Or diagonal. Also a very common layout option. Peculiarities:

  • Creates a very interesting visual effect, looks stylish. With its help, the most original and stylish designs are obtained. Gives depth to the room, sharpness to the design.
  • A rather time-consuming option, so only an experienced master finisher can carry out such a layout. Requires careful calculations and accurate cutting of the material. In terms of labor costs, it is comparable to laying a mosaic.

Wall panel

This scheme is a classic of the genre, when the lower third of the wall is laid out with dark tiles, and the upper two thirds with lighter ones. The place where different colors of tiles join is usually decorated with a contrasting border to match, it can also be made from a mosaic. Often this way of designing bathrooms can be seen, as an example, in various public institutions. Such methods can be used for your own bathroom, but this gives the bathroom a little rigor and formality.

Features and rules:

  • Such a layout project makes the room lower, while expanding it. You should carefully study the floor plan.
  • In this case, the floor can either coincide with the walls or be completely contrasting with them. Each design is interesting in its own way.
  • In some variations, you can see a combination of a light bottom and a dark top. However, this layout of tiles in the bathroom lowers the level of the ceiling, so it is suitable for narrow and high rooms. And in most of our standard apartments, small and not too high bathrooms are still more common.
  • The border on the walls of the bathroom can be made as a narrow strip, or as a fairly wide independent area, tiled in several rows. In addition, there may well be several of these strips, especially if they are narrow. Just do not forget that each of them will make the room a little lower.

with border

In this version of the layout, the tiles that are laid out on the floor continue on the wall. But not completely on the entire wall, but 2-3 rows above the floor. Above, it is desirable to make a tile of a different shade, most often lighter. Such a layout plan will make the design of the room lower and wider.

Fragments with an accent

A very popular layout plan today. But such tile layout options in the bathroom are only suitable for a decent-sized room. In a small room, contrasting accents can create a visual imbalance that looks inharmonious.

  • If you decide to choose such a bathroom tile layout project, then you should know that you do not need to focus on more than 2-3 areas of the bathroom. An ideal example of layout when accents are made in the area of ​​​​the washbasin, heated towel rail and shower. Or in another similar way.
  • If you do not want to increase the height of the ceiling, then the accent area should not be started directly from the floor, but it is better to do it at some distance. It is also not necessary in this case to bring the accent to the ceiling.
  • You can make accents with mosaics.
  • On the floor, such a layout plan does not apply. The accents made on the floor look ridiculous and out of place.

Equality of colors

In this case, they take several colors - contrasting or similar, usually 2-3 shades, and decorate the walls of the bathroom with them. In this case, the colors should not mix. One wall is laid out with one color, the second with another, etc. Be sure to choose a harmonious combination of colors. Peculiarities:

  • Thus, it is possible to visually clearly divide the functional areas in the bathroom. For example, highlight the area near the washbasin in red, and finish the area near the shower with black tiles. The layout can be both horizontal and vertical.
  • The floors in this case are finished with tiles of the same colors, but at the same time they can be mixed. For example, it would be great to use a chess layout for the floor.
  • This design does not look good in a small bathroom, as it will visually make the room narrow and small.

The owners of apartments do not intend to deal with the formation of a new interior and surface cladding in the hygienic room with excessive intensity, since this process requires a considerable amount of time, even more expenditure of financial and labor resources. Therefore, the options for laying tiles in the bathroom should be thoroughly thought out, correctly calculated, identify everything acceptable and leave only the best.

The bathroom is a room used not only for hygienic exercise, this room is for relaxation, for restoring physical strength and strengthening tone. Every touch of the interior should bring pleasure along with the procedures taken in the bathroom. This means that the design of the bathroom needs to be planned with scrupulous care in order to avoid costly alterations and updates.

Planning for the future layout

The natural choice of every reasonable apartment owner who wants to finish the bath properly is almost “native”, incredibly “close” and well-known tiles. This is the best finishing material for the bathroom, which can withstand the "onslaught" of steam, water and temperature fluctuations. There can be no other options, but the variability of modifications and brands of tiles is sure to lead to difficulty.

You can’t get confused in the configuration of tile elements: they are mainly rectangles and squares. With a colorful palette, texture, the presence of a relief or color pattern, the caliber of elements is much more difficult, since there are an innumerable number of them. For novice finishers, there is an excellent recommendation: do not get carried away with small tiles, ornate laying patterns and methods that require multiple cutting of tiles.

Bathroom - a room for hygiene and relaxation, its design and decoration should be a pleasure

Tile - the best material for finishing the bathroom, a rational reasonable option

Bathroom Design Ideas

Own, professional, spied on by neighbors, recorded in popular magazines, there are much more design ideas than brands and varieties of tiles. After all, the very nature of the material, consisting of individual elements, allows you to create a huge number of combinations. To alleviate the problems of installers, manufacturers have now begun to supply the market with serial products, including basic elements in several colors and molded parts that blend wonderfully together in any set.

Serial releases involve the use of various laying patterns and product compatibility

Advice. It is advisable to implement the idea of ​​​​laying tiles of different colors and calibers to give preference to products from one manufacturer, so as not to suffer with the selection of color tones and sizing by trimming.

The standard for laying tiles in domestic bathrooms is a dark bottom and a light top with a border line in the middle. However, it is not necessary to adhere to the order of the bored reception. In general, designers do not recommend this scheme for arranging small-sized bathrooms; it optically reduces an already small room, despite the horizontal arrangement of rows of tiles. The surroundings in small bathrooms, typical for domestic planning, should not be oversaturated with decorative elements, given that there are usually too many items there: plumbing, household appliances, shelves, special furniture.

The traditional light top and dark bottom are diversified by a wall tiled in the same color with flooring

When choosing a color palette for tiles for a hygienic room, you should give preference to your favorite color, which will be pleasant to look at. As soon as the eye lingers on any product, you need to look at it in more detail. The main guideline should be your own feeling, but a sense of proportion should not be neglected: a “screaming” environment will put pressure on the psyche and will not let you relax.

Note. It is better to start laying tiles in the bathroom from the wall, which fully falls into the field of view. Centering for laying the floor in bathrooms is done very rarely only if there is a colorful "spot" in the middle.

When coming up with a design, it should be taken into account that the competent arrangement of accents will help to visually adjust the geometric framework of the room.

With the help of a competent layout, you can correct the shortcomings of the room

Those wishing to optically increase the width of the bathroom will help:

  • small tile;
  • cold blue, silver, gray-turquoise tiles;
  • horizontal laying direction;
  • diagonal direction of rows of tiles on the floor surface;
  • abstract stripes or a strictly adjusted transverse ornament;
  • a border of tiles of a contrasting color or installation of a frieze, laid in the area where the walls join with the lower and upper floors.

Owners seeking to visually increase the height of the ceilings will be facilitated by:

  • vertically directed laying;
  • vertical colorful stripes, friezes installed in the same direction and corners highlighted in color along the entire height;
  • installation of decorative details not lower than eye level.

Mirrors and glass will visually increase the space of the bathroom

In reputable stores, they now offer to “beat” all kinds of options using a special program. You can practice design art the most by using one of the available graphic editors Paint, CorelDraw or Photoshop, so that the layout of the tiles in the bathroom will not upset you later. But before fitting, sketching and coloring, the most important process must take place - creating a plan for the bathroom.

Rules for drawing a plan

Roulette, ruler, pencil, paper to help those who want to perfectly lay tiles, correctly place accents and decor details so that they are not obscured and covered by plumbing, furniture, and household appliances.

Hide under the furnishings of the bathroom and in the far corners you will need to cut the elements.

  • Let's take the dimensions. This must be done with the utmost accuracy, these figures will help to correctly calculate the material consumption, as well as determine the location of the decor details, the likelihood of cutting, the size and area for gluing the cut tiles.
  • On the floor plan, we display the perimeter of the floor, draw walls, a door, ledges, niches.
  • We designate the location, shape and dimensions of plumbing, at this stage we decide whether the transfer and installation of additional lighting equipment will be carried out, draw the location of sockets, outlets for pipes, taps and other equipment.

Here is a plan you need to draw for tile layout on the floor

The created plan can be duplicated on an additional sheet of paper in order to try out tile laying options with colored pencils. You need to think again about whether the entire surface of the walls will be tiled or tiles can be laid in segments around the plumbing, or up to some limit around the perimeter. If the plans, including the paper sketch, are built, you can proceed to the selection of the laying scheme.

bathroom tiling sketches

List of popular styling options

Option # 1 - the simplest seam-to-seam pattern

An elementary laying method that predetermines the straight direction of the rows, parallel to the geometric lines of the room. The accuracy of directions on vertical surfaces is verified by a plumb line, the accuracy of contour lines by a triangle. Rectangular and square tiles are suitable for laying with this method. The expediency of the basic option justifies the minimum consumption of material, the simplicity of the gluing process and the harmony of combination with all kinds of borders, with ornamental trim.

Basic tile layout and schemes based on it

Important. Do not rely on your personal eye, glue the tiles in the bathroom using special plastic crosses needed to form even seams.

Option # 2 - laying tiles "in dressing"

This option resembles traditional brickwork. The best choice for its implementation is a rectangular tile. The reception is simple, but with some obstacles: it is better not to use two contrasting colors of tiles, they will create the impression of an uneven floor. The rows are stacked horizontally, the vertical arrangement looks bad. The advantage of the method of laying "in the dressing" is the possibility of using tiles with minor deviations in geometric dimensions. This defect will not be noticeable.

Option #3 - diagonal styling

For an inexperienced performer, the method is too complicated, moreover, it is associated with a large consumption of tiles and laborious division of elements into parts. Butt joints, as in basic masonry, resemble crossed lines, the correct location is controlled by the level and the triangle applied to the axes.

Diagonal layout option

Thanks to diagonal lines, non-parallel walls are visually corrected, the frames of a small room are “moved apart”.

Option #4 - chess

It is a variation on the theme of "seam to seam" using tiles of two different colors.

Laying tiles in a checkerboard pattern

Option #5 - modular way

This method of laying tiles predetermines the use of three or more sizes of facing tiles, which creates a dynamic non-trivial pattern. It can be a clearly sustained ornament, a chaotic arrangement, interspersed with bright dots in a relatively monotonous surface.

Modular tile layouts

Important. For laying tiles in a modular way, it is imperative to choose tiles with multiple sizes, it is desirable that these be products of one company. The modular version requires the preliminary layout of the elements without gluing, since it is very difficult to imagine exactly how the floor will look like.

Option #6 - linear option

For its implementation, two or more colors of the same size tiles are used. Solid or intermittent, parallel or intersecting, symmetrical, broken or chaotic lines run in any place preferred by the owner.

Option # 7 - "ornament"

Ornament - a styling option that resembles a carpet with a geometric pattern, a carpet with a beautiful colored border, or, conversely, a plain "canvas" with a bright pattern in the center.

Note. To the number of tiles calculated according to the area to be trimmed, immediately buy another 15% of the same material.

It is also possible to combine two or more laying patterns, used by craftsmen not only in one room, but also used for facing one surface.

Far from the entire list is given, listing the options for laying out tiles in the bathroom, it makes no sense to describe all the schemes, methods, and techniques. Knowing the basic methods of tile location, you can come up with your own unique option. Now it remains to study the technology of laying a strong beautiful cladding in the bathroom and proceed with the implementation.