Almost every owner wants to have a bath on his own site. However, not everyone has enough time to build it, since in the summer time the chores with the garden and vegetable garden interfere, and in winter it is very difficult to build. If you are familiar with the problem voiced firsthand, then modular baths are an excellent way out of the situation.

General information

Modular baths are called ready-made structures that are assembled from wooden container blocks like a designer. Such buildings are up to three floors high, but most often they are small one-story structures. They are fully equipped with communications and heating, as it should be for a pair.

As a rule, a modular bath is built from modules of standard sizes - 6 * 2.5 * 2.5 m. However, at the request of the customer, manufacturers can also use modules of other sizes.

Often, manufacturers are even ready to make changes to the standard designs of their modular designs. So, if desired, you can change the internal layout, additionally equip the bath with a shower room, a dressing room, an enlarged rest room, etc.

There are a number of various technologies for modular wooden housing construction, each of which has its own advantages and disadvantages, however, all of them are united by one important and indisputable advantage - significant cost savings and short construction time.

Advantages

Wooden baths, made of modular blocks, have a number of advantages, among which are the following:

• A modular bath can be built at any time of the year - even in frosty winters, even in hot summers. The material from which the structure is being built is not afraid of even the most “extreme” temperature changes. In addition, the construction itself does not contain "wet work" such as concreting or plastering.
• High construction speed. Even if you do the assembly of the structure yourself, it will take several weeks. Reception, most of it will be taken away by interior decoration.
• . Modern heat-insulating materials allow, with a relatively small wall thickness, to provide savings in heating the bath in the winter.
• Unlike log cabins, there is no such drawback as shrinkage of the structure. For the manufacture of modules, wood subject to chamber drying is used, so the structure will never present unpleasant surprises in the form of cracks on the walls or warped doors. Accordingly, interior decoration can be started immediately after the construction of the frame.
• The construction of such a steam room does not require the use of heavy equipment, since all elements of the building are relatively light in weight, due to which two or three people can move them on their own.
• The bath from the modules is lightweight, which allows you to significantly save on the construction of the foundation.
• The structure is resistant to seasonal changes and soil movements.
• All engineering communications can be hidden in the wall.
• High level of noise insulation - mineral plates, which are used as thermal insulation, well reduce the noise level in the bath, which contributes to a comfortable stay.
• Long service life - the estimated service life of a modular bath can be up to 85 years.
• No building permit required.
• Acceptable price of a bath - modular construction is cheaper than traditional.
• By purchasing a construction assembly kit, you avoid possible design errors or defects in the manufacture of parts. The owner is only "manual" work on the assembly of the finished "constructor".
• In the event of a change of site or when buying a site in another area, you can disassemble and bring the sauna to the right place.
• Other pluses include a complete set of the building, so you do not have to spend money on additional elements. Everything you need in the steam room is already there.

Advice! It is better to purchase a product from a trusted manufacturer who has managed to establish himself in the modular construction market.

disadvantages

The disadvantages of the modular design are not so many, but they are:

• Some limited architectural solutions. The traditional design of modular buildings, including baths, is extremely functional. There are absolutely no architectural details in it that give the structure an individuality. Therefore, it is possible to achieve at least some peculiarity only by finishing the facade, for example, by its unusual coloring.
• Despite the fact that the assembly of modular buildings is simple, at the first stage you will need the help of a qualified specialist who will show how it is done, or detailed instructions.

Where can I place a modular bath

Before making a decision to purchase this design, it is necessary to decide in advance where the bath will be located. The ideal option is the location of the steam room near a natural reservoir - a river, a pond or a pool.

Note! Waste water from the bath should not fall into the reservoir in any case. It is best to arrange the flow of water into the tank.

When choosing a place, it is desirable that the site on which the bathhouse will be located is not visible from the neighbors and the road. If necessary, it can be fenced off with plantings or other buildings.

Advice! It is better to orient the building so that the entrance is located on the south side. In this case, the snowdrifts formed during the winter near the entrance will quickly disappear, and the setting sun will give the room a mood of relaxation and peace.

Conclusion

If you are dreaming of a bathhouse in your backyard, but do not have time for a full-scale construction, then it will be an excellent choice. Good performance, as well as mobility and high speed of erection make them in some cases simply irreplaceable.

For more information on this topic, see the video in this article.

Specifications:

• Floors: 1
• Dimensions: 6055x2435 mm
• Weight: 3000 kg
• Colour: RAL 5010, RAL 9002
• Installation time on the finished foundation: 1 hour
• Thermal insulation (floor/walls/roof): 100/100/100 mm mineral wool

Finishing materials:

• Internal: LDSP light oak or white metal
• External: profiled galvanized and painted steel sheet
• Decorative exterior finish

The package includes all necessary finishing and additional elements.

Requirements:

1. Requirements for foundations:

• flat area, freed from the top layer of soil (in case of stationary stay of the block container for less than 1 year)
• FBS foundation blocks
• screw piles
• road slabs

• on the floor 200-300 kg \ m 2
• snow 120-200 kg \ m 2 (to increase the snow load, a secondary pitched roof is installed)

Every person who has a summer cottage dreams of his own bath. Often it turns out that there is no time for its construction. In summer, you need to do gardening and gardening, and in winter the ground freezes heavily and it is not possible to fill the foundation. If you are familiar with this problem, its solution is obvious - modular baths.

Since the weight and dimensions of the Containex components are extremely small, their transportation takes very little time. For such a bath, there is no need to pour a cement foundation, and its installation will take only a few days. Forget about the long and tedious preparation! All you need to install it is the road along which a large car will drive up to your site. The second obvious plus is that the structure is fully equipped and ready for work immediately after installation.

Advantages of modular baths

Depending on the requirements of the customer, you can change the internal layout of the bath and make a shower room, rest room or dressing room. Design and interior decoration also change based on the wishes. Such a bath combines all the advantages of a traditional Russian bath and has a number of significant advantages compared to a stationary version.

Banya is something close and dear to a Russian person. For us, it is a symbol of purity of spirit and health. When ordering construction in our company, you are guaranteed to get an unforgettable experience and give more than one pleasant evening to yourself and your loved ones. We look forward to your orders!

You can send your project for calculation to our specialists for free!

Using the method convenient for you.

At: or WhatsApp: +79015789324

Baths mobile ready (baths transportable)

If you decide to buy a mobile bath, then you have chosen the right direction. Our company has been supplying ready-made mobile baths for more than 10 years. In this section of the site you can choose the most suitable project for a mobile transportable bath. Our company also manufactures and supplies baths according to individual projects. For those who want a more spacious bathhouse, for example, a bathhouse with a terrace or a bathhouse with an attic, etc., we offer “buy turnkey bathhouses from timber”, this type of bathhouse is assembled at the Buyer’s site, since its dimensions do not allow transporting it in finished form.

Baths mobile ready- ideal for those who save their time and money. For example: the construction of a bath 6x3 meters from the same profiled timber takes an average of 10-15 days. Baths are mobile ready-made with a stove are made and delivered within 4-5 days, while they do not require additional costs for revision.

Dimensions such baths determined by the transport capabilities of trucks. Bath width cannot be wider than 2.5 m. But this almost belittles its merits, because even such baths are carried out in accordance with the traditions of the construction of ancient Russian baths.

Completely finished baths, they are delivered by truck and unloaded using a manipulator or truck crane. If it is necessary to unload with a truck crane, the search for a crane and its payment is the responsibility of the Customer. A possible solution in the search for technology for bath unloading will be the nearest construction market or car depot. As a rule, its employees have information where and under what conditions it is possible to order a crane for unloading baths. In the basic configuration, in the mobile bath, wooden curtains are installed in the steam room and a metal stove with a heat exchanger and a tank for hot water, a shower tray with a drainage system, and electrical wiring is carried out. Cement blocks 20x20x40 cm can also be supplied. sauna installations(option).

Detailed description and characteristics of the mobile bath

The design of the finished mobile bath:

At the base bath mobile- two beams 100x150 mm. They are interconnected by logs from a bar 40x150 / 100x150 mm. The floors have a multilayer structure. 1st layer - rough floor, made of unedged boards with a thickness of 20-22 mm., 2nd layer - glassine waterproofing (one layer), 3rd layer - mineral wool insulation URSA, ISOVER or KNAUF - 100 mm. The last, 4th layer is a grooved floor board with a thickness of 28-36 mm. Walls baths made of profiled timber and can have a thickness of 100 or 150 mm. The steam room is sheathed with aspen clapboard, foil is laid under the clapboard. the ceilings are hemmed with clapboard and insulated with mineral wool -100 mm. The rafters are made of a bar 50x100 mm., the crate is made of unedged boards 20-22 mm. The roof is sloping, the coating is galvanized profiled sheet C 8.

Arrangement of a mobile bath

Ready baths have two or three main rooms, going in sequential order: a steam room, a sink, a rest room.

Shower room baths equipped with a tray with a drainage system under the bath, a tank for hot water.

Pair department baths equipped with two-tier canopies made of aspen.

A stove with a built-in heat exchanger is cut into the partition separating the steam room and the shower room. From the latter comes the firebox baths.

Ready bath - only "for", and no "against"

It should be noted what kind of summer cottage or country house without finished bath. A portable bath is an age-old attribute of any village house, dacha, etc. Where, if not in the bath, you can relieve daytime fatigue, restore your tone and just get the most out of it. You purchased a summer cottage, but no baths? We think it's worth considering! Bathhouses are ideal for people who want to save money and time on the construction of this facility. Our company guarantees its customers the manufacture of a turnkey bath within a few days, while you purchase a ready-made bath at a much lower price than from other manufacturers. Ready-made baths from a bar- These are facilities equipped with everything necessary for a comfortable stay. Usually, turnkey baths consist of three rooms: a rest room, a washing department and a steam room directly. You can change their location and size depending on your needs and preferences. Ready-made baths from a bar, made by our craftsmen, are completely ready for transportation, because. correspond to the same transport dimensions. They are delivered to the site in finished form and unloaded using crane equipment.

A few words about the design of mobile baths

To prevent drafts in the bathhouse, we use wooden double-glazed windows (imitation double-glazed windows). So that in the future you do not have to caulk the walls in the bath, we use a profiled beam with a jute insulation pad. The mobile baths are equipped with everything you need: an electrician, a wood-burning stove, a hot water tank, canopies and benches in the steam room. All you need is a source of water on the site, connect electricity, firewood and various accessories: a broom, mittens, a hat and essential oils.

Decided to buy an inexpensive bath ready?

Inexpensive baths are mobile baths, choose a warmed mobile bath with a stove from the options offered on our website, a more suitable option. If the site does not have a project suitable for you for a bath, then you can send your sketch to us in any way available to you, we will calculate for you bath cost according to your sketch.

Prices for mobile ready-made baths

*The price of a finished mobile bath from a bar 100x150 mm. from 95000 rub. up to 142,000 rubles.

*The price of a finished mobile bath from a bar 150x150 mm. from 111000 rub. up to 160,000 rubles.

* You can also buy a mobile bath with assembly on the site. Assembly of a mobile bath on the site + 25,000 rubles. to the cost of the bath.

When ordering additional options or changing sizes, the cost of a mobile bath may vary.

Delivery cost with installation of a mobile bath

* Delivery with unloading baths Moscow, Moscow region. up to 30 km. from MKAD - 25,000 rubles.

* Over 30 km. from MKAD 50 rub. for every km.

Buy a mobile bath ready in 2019 in Moscow, in the Moscow region and throughout Russia, you can contact our company, our managers will help you choose the best bath option for you.

We have updated the complete set of portable mobile baths in 2018, there are significant improvements in the complete set.

More information about baths mobile ready You can get by contacting our managers.

Floors: moisture resistant plywood, 18mm thick.

Ceilings: moisture resistant OSB boards (OSB-3)

TURNKEY COMPLETE MINI HOUSESFOR 14,200 RUB/SQM

Construction cost includes:

Individual design

Foundation on screw piles

Framework on the Canadian frame technology from a board of coniferous breeds 50X150 MM.

Treatment with antiseptics and flame retardants of all wooden structures

Insulation of walls, floors, roofs - 150 mm. Rockwool Light Butts/Paroc.

Exterior decoration of the facade walls: imitation of timber

Interior wall decoration: imitation of timber, or drywall

Floors: grooved board 38mm

Ceilings: eurolining

PVC windows (KBE, Rehau, Gutwerk)

Entrance metal door

Roofing - metal tile (polyester)

Roof eaves filing - Docke plastic spotlights

Gutter system Docke

mini house"Banya" is made in the best Russian traditions. Carved windows and doors make the design of the house unique. The operation of the premises depends on the wishes of the future owner. The area is optimal ˗ twenty square meters.

Mini house, buy which is simpler than ever ˗ modular mini-bath with delivery to your site.

A real mini house or sauna in a classic style with delivery to your garden plot. Reconciled classical architecture and high build quality are the calling card of our mini houses. At your request, it is delivered completely ready for living. Possible furnishing.

Overall dimensions 6x2.5x2.9 m.

Insulation 100mm

Possibility of year-round operation.

Huge selection of architectural designs and plans OK.

Wooden eco-baths, assembled from modules, are an economical and quick way to organize a room for pleasant pastime, health improvement and bath procedures. Such a structure is distinguished by the use of natural building materials, as well as a complete set that can compete with self-built buildings.

The purchase of a modular eco-bath for a personal summer cottage or in addition to a cottage for permanent residence is a profitable and practical solution that allows you to save money without compromising the quality of the structure. Modular eco-baths can be provided in a standard version or made according to the individual wishes of the customer.

Materials for ecological buildings are selected taking into account the minimum impact on the nature and health of bath visitors. In development, we take into account the reaction of the raw materials used to changes in temperature, humidity and all thermal processes occurring indoors. As a rule, exterior decoration is carried out using a bar or blockhouse, and interior decoration is organized using lining. Modular eco-baths are reliable and comfortable structures with a long service life.

The technical parameters of modular structures are not inferior to the characteristics of standard baths, therefore, alternatives to standard designs are increasingly attracting the attention of customers.

• The main feature of the modular eco-bath is the ability to move and transport on the site and as part of the transportation to another location. If you decide to sell the site, then the modular bath can be disassembled and moved for sale or use in a new location.
• Modular baths are compact and do not take up much space on the site.
• They can be installed near construction sites, providing employees with the opportunity to carry out hygiene procedures during their stay near the place of work.
• Modular eco-baths have two or three rooms. A small dressing room is supplemented by a steam room, and in some cases a washing space is organized.
• The building is practical, functional and versatile.

The purchase of a modular eco-bath in the Moscow region will help solve a lot of problems. By receiving a ready-made construction on a turnkey basis, you will get rid of the need to solve household and economic issues.

• The modular design is assembled by professionals right on the site in a short time and without additional construction work.
• Installing an eco-bath of this format does not require pouring the foundation. Installation is carried out on supports or screw piles.
• Baths can be used at any time of the year. They are equipped with a layer of insulation and waterproofing.
• Bath materials are environmentally friendly, durable and reliable, suggest a long service life of the structure and are absolutely safe.
• The customer is given a choice of objects of various models and configurations. You can give preference to any layout, choose an eco-bath with a veranda, a leisure room equipped with furniture, etc.

The cost of a modular eco-bath often turns out to be budgetary in comparison with the organization of a stationary structure for a personal site. Anyone with an average income can afford it. A modular eco-bath will be a profitable and practical investment.