Double-circuit cast-iron gas floor boiler Protherm Bear 40 KLZ with an open combustion chamber, 38 kW for heating and hot water in a built-in 90 liter boiler. Designed for installation in residential buildings, country houses and industrial premises.
Electric ignition. Smooth regulation of boiler power for various modes of its operation. Possibility of installing a fan for the forced removal of flue gases
Display of the temperature and pressure of the heat carrier from the heating system, which allows you to continuously receive information at any time during the operation of the boiler
When connecting room regulators, the boiler control system allows you to maintain a comfortable microclimate in the premises.
Gas boilers Protherm Bear KLZ is the simplest solution for those who do not want to worry not only about heat, but also about the availability of hot water. Floor double-circuit boilers Proterm Medved with a cast-iron heat exchanger have a built-in boiler with a volume of 90 liters or more.
Protherm Bear 40 KLZ is delivered already assembled, which makes transport and installation of the boiler as easy as possible. The ability to replace the cast iron sections of the heat exchanger significantly reduces repair and maintenance costs, and allows you to extend the life of your boiler.
Technical features of Protherm Bear 40 KLZ:
Designed for systems with closed coolant circulation
Cast iron double pass heat exchanger
Open combustion chamber
Possibility of preparing hot water in the built-in 90 liter storage boiler
Efficiency 90-92%
Atmospheric stainless steel burner
Smooth regulation of boiler power
Electric ignition
Boiler control with built-in microprocessor
Built-in 10 liter expansion tank
Integrated heating circuit pump
Built-in hot water circuit pump
Control mode "WINTER-SUMMER"
Indication of coolant pressure in the heating system
Heat carrier temperature indication
Automatic diagnostics of boiler operation
Independent control of the heat loads of the heating circuit and the hot water circuit
Ability to work with weather-dependent automation
Protection of the cast iron heat exchanger against condensate
Chimney draft control
Overheat protection (pump overrun)
Flame control
Circulation pump anti-blocking system
Frost protection
Limitation of frequent switching on of the boiler
Possibility of installing a fan for the forced removal of flue gases
Cooling circuit (prevents the temperature of the coolant in the boiler from rising above 1100C)
Resistant to difficult hydraulic conditions
Delivery of the boiler already assembled
Possibility to replace middle cast iron sections
Ease of installation, care and maintenance
Possibility of work on the main and liquefied gas
Description and application:
Floor-standing cast iron gas boilers with a capacity of 18 to 49 kW for heating and hot water preparation in a built-in 90 liter boiler. Designed for installation in residential buildings, country houses and industrial premises
Electric ignition. Smooth regulation of boiler power for various modes of its operation. Possibility of installing a fan for the forced removal of flue gases
Display of the temperature and pressure of the heat carrier from the heating system, which allows you to continuously receive information at any time during the operation of the boiler
When connecting room regulators, the boiler control system allows you to maintain a comfortable microclimate in the premises.
Gas boilers Protherm Bear KLZ is the simplest solution for those who do not want to worry not only about heat, but also about the availability of hot water. Floor double-circuit boilers Proterm Medved with a cast-iron heat exchanger have a built-in boiler with a volume of 90 liters or more.
Each of the four available modifications, Protherm KLZ 40, for example, is supplied already assembled, which makes it as easy as possible to transport and install the boiler. The ability to replace the cast iron sections of the heat exchanger significantly reduces repair and maintenance costs, and allows you to extend the life of your boiler.
Technical description:
● Gas boilers
● Designed for systems with closed coolant circulation
● Cast iron double pass heat exchanger
● Open combustion chamber
● Possibility of preparing hot water in an additional storage boiler
● Number of heat exchanger sections from 4 to 8
● 4 power modifications from 19.0 to 49.0 kW
● Efficiency 90-92%
● Stainless steel atmospheric burner
● Smooth regulation of boiler power
● Electric ignition
● Boiler control by built-in microprocessor
● Integrated 10 liter expansion tank
● Integrated heating circuit pump
● Built-in hot water circuit pump
● WINTER-SUMMER control mode
● Indication of the pressure of the coolant in the heating system
● Heat carrier temperature display
● Automatic diagnostics of boiler operation
● Independent control of the heat loads of the heating circuit and the domestic hot water circuit
● Ability to work with weather-compensated automation
● Protection of the cast iron heat exchanger against condensate
● Chimney draft control
● Overtemperature protection (pump overrun)
● Flame control
● Circulation pump anti-blocking system
● Frost protection
● Limitation of frequent switching on of the boiler
● Possibility to install a fan for the forced removal of flue gases
● Cooling circuit (prevents the temperature of the heat carrier in the boiler from rising above 1100C)
● Resistant to complex hydraulic conditions
● Delivery of the boiler already assembled
● Possibility to replace middle cast iron sections
● Easy to install, care and maintain
● Possibility of work on the main and liquefied gas
● Manufacturer's warranty 2 years
Specifications:
● Boiler type: floor standing
● Height, mm: 1385
● Depth, mm: 505
● Width, mm: 892.0
● Weight, kg: 130.0
● Chimney, mm: 150
● Gas pipeline: 3/4
● Heating circuit: 1
● DHW circuit: 3/4
● Voltage / Frequency, V/Hz: 220/50
● Consumption, kW: 0.02
● Protection class: IP 40
● Net power, kW (gas): 38.5
● Efficiency, %: 90.0
● Working pressure, Atm: 0.5 - 3.0
● Natural gas pressure, mm Hg: 130
Single-circuit cast-iron gas floor boiler Protherm Bear 40 PLO(Manufacturer: Slovakia) with an open combustion chamber, 38 kW for heating and hot water preparation in an external boiler. Designed for installation in residential buildings, country houses and industrial premises
Boiler ignition Protherm Bear 40 PLO carried out using a piezoelectric element. 1 or 2-stage regulation of the boiler power for various modes of its operation. Possibility of installing a fan for the forced removal of flue gases
Display of the temperature and pressure of the heat carrier from the heating system, which allows you to continuously receive information at any time during the operation of the boiler
When connecting room regulators, the boiler control system allows you to maintain a comfortable microclimate in the premises.
Gas floor boiler Protherm Bear 40 PLO perfect for heating small spaces and very easy to use. It is compact, does not take up much space, has the ability to connect an external boiler and install a forced fan for more efficient removal of exhaust gases.
Technical features of Protherm Bear 40 PLO:
- Cast iron double pass heat exchanger
- Open combustion chamber
- Possibility of preparing hot water in an additional storage boiler
- Efficiency 89-90%
- Atmospheric stainless steel burner
- 1-step boiler power control
- Piezo ignition
- Boiler control with built-in microprocessor
- Control mode "WINTER-SUMMER"
- Indication of coolant pressure in the heating system
- Heat carrier temperature indication
- Protection of the cast iron heat exchanger against condensate
- Chimney draft control
- overheat protection
- Flame control
- Possibility of installing a fan for the forced removal of flue gases
- Cooling circuit (prevents the temperature of the coolant in the boiler from rising above 110 C)
- Resistant to difficult hydraulic conditions
- Delivery of the boiler already assembled
- Possibility to replace middle cast iron sections
- Ease of installation, care and maintenance
- Possibility of work on the main and liquefied gas
Online store of heating systems and water supply site offers buy gas floor boiler Protherm Bear 40 PLO at the lowest price with delivery in Moscow and the Moscow region.
The floor-standing gas boiler Protherm Medved 40 KLOM is designed for space heating with the possibility of organizing hot water supply when heating water in a separate indirect heating boiler.
The floor-standing cast-iron boiler Protherm Medved 40 KLOM is resistant to thermal stress, corrosion and has a long service life. It is designed to heat private households, commercial, utility and industrial premises up to 400 sq. m. Key features of this model:
- Durable cast iron heat exchanger;
- Electric ignition;
- Smooth power adjustment;
- Ability to work on liquefied gas;
- Protection of the heat exchanger against condensate.
The heart of the floor standing boiler Protherm Bear 40 KLOM is a two-way cast iron heat exchanger for 5 sections, protected from condensation. It is characterized by a long service life, and its high heat capacity ensures that the temperature of the coolant is maintained. The boiler is single-circuit, it is designed for operation in open and closed heating systems with forced circulation of the coolant. The maximum coolant pressure in the heating circuit is 4 atm at a temperature of + 45-85 degrees. Preparation of hot water is carried out at the expense of the connected boiler of indirect heating.
The floor boiler Protherm Bear 40 KLOM is equipped with microprocessor control and electronic ignition of the burner. It also presents an electronic flame modulation system that regulates power in the range of 24.5-35 kW and maintains a given temperature in the heating system. The combustion chamber in this boiler is open, it will require a traditional chimney with a diameter of 150 mm. Equipment efficiency reaches 90%. Natural gas is used as fuel, it is also possible to switch to liquefied gas by reconfiguring.
If necessary, the gas boiler is reconfigured to work with a forced smoke exhaust system by installing a fan. It is also possible to install a chimney draft control system and connect a room thermostat - the latter will provide accurate indoor climate support and gas savings of 10-15% (Exabasic, Exacontrol, Exacontrol 7 and Kromschreder E8.4401 controllers are supported). To adjust the parameters, the boiler was equipped with a control system with a liquid crystal display.
Do you need a reliable cast iron boiler from a well-known brand, which is characterized by stable operation in any conditions? The Teplodvor online store recommends purchasing the Protherm Medved 40 KLOM model. This is a powerful and productive boiler with a cast-iron heat exchanger and modern microprocessor control that saves gas. Additional equipment is also on sale - safety groups, expansion tanks, circulation pumps and safety groups.
Technical features:
- sectional heat exchanger made of cast iron with a period of 20 years.
- burner with electric ignition;
- the possibility of transferring the boiler to liquefied gas;
- built-in microprocessor that controls the operation of the boiler and provides self-diagnosis (in case of water loss in the heating system, gas supply interruption, etc.), with the display of possible malfunctions on the display;
- smooth power modulation due to constant comparison of the actual temperature value with the temperature set by the consumer;
- soft start - the boiler operates with a minimum power after ignition of the gas for a certain time. This function does not work during the preparation of domestic hot water, and the required power is reached immediately;
- run-out of the RH pump - for approximately 3 minutes after the boiler has been switched off, the pump continues to circulate water in the heating system;
- function of limiting anti-cycling in heating mode - when the boiler is switched off, re-ignition is possible no earlier than after 3 minutes and the temperature of the RH decreases by 8 ° C (does not work when the boiler is turned off by the room regulator);
- system protection function against freezing - when the temperature of the RH falls below 10 ° C, the pump is turned on;
- boiler anti-freeze protection function - when the RH temperature drops below 8°C, the boiler switches on;
- protection against freezing of the tank - when the DHW temperature drops below 6 ° C, the boiler turns on;
- limiting the start of the boiler in case of possible freezing (if it was turned off);
- limiting the start of the boiler with a possible loss of water. pump protection - turning it on for a short time if it has not worked continuously for 24 hours, which prevents the possibility of blocking the pump with scale deposits and mechanical impurities;
- overheating protection - pump activation, when the RH temperature is higher than the set temperature or higher than 85°С. When the RH temperature exceeds 95°C, the boiler is switched off;
- the temperature of the RH and DHW and information about emergency conditions is displayed on the display;
- the system can integrate an RH pump, a pump for the DHW circuit, an automatic air separator and a high-pressure expansion tank;
- chimney draft control system (SKKT) - in case of accumulation of combustion products in the boiler (with their insufficient removal), the SKKT system will be activated and turn off the boiler;
- the cast-iron heat exchanger of the Protherm Bear boiler is made up of separate links, which are specially designed so that the heat during the combustion of the fuel is transferred to the heating water as much as possible;
- the cast-iron links of the heat exchanger are provided with a long warranty period of 20 years;
- high-quality, environmentally friendly and efficient thermal insulation that prevents unwanted heat loss;
- availability and reliable two-stage gas valves.
Description of the boiler Protherm Bear 40 KLZ
Floor-standing cast iron gas boilers with a capacity of 18 to 49 kW for heating and hot water preparation in a built-in 110 liter boiler. Designed for installation in residential buildings, country houses and industrial premises.
Electric ignition. Smooth regulation of boiler power for various modes of its operation. Possibility of installing a fan for forced removal of flue gases.
Display of the temperature and pressure of the heat carrier from the heating system, which allows you to continuously receive information at any time during the operation of the boiler. When connecting room regulators, the boiler control system allows you to maintain a comfortable microclimate in the premises.
Boilers with a modulating burner and electric ignition for heating with the possibility of heating hot water in a built-in 110-liter boiler.
Features Protherm Bear 40 KLZ
Boiler type: double-circuit;
Gas type: natural gas, liquefied gas;
Chimney type: chimney;
Combustion chamber type: open;
Ignition type: electronic ignition.
Technical description of the Bear series
gas boilers
Designed for systems with closed coolant circulation
Cast iron double pass heat exchanger
Open combustion chamber
Possibility of preparing hot water in an additional storage boiler
Number of heat exchanger sections from 4 to 8
4 power modifications from 19.0 to 49.0 kW
Efficiency 90-92%
Atmospheric stainless steel burner
Smooth regulation of boiler power
Electric ignition
Boiler control with built-in microprocessor
Built-in 10 liter expansion tank
Integrated heating circuit pump
Built-in hot water circuit pump
Control mode "WINTER-SUMMER"
Indication of coolant pressure in the heating system
Heat carrier temperature indication
Automatic diagnostics of boiler operation
Independent control of the heat loads of the heating circuit and the hot water circuit
Ability to work with weather-dependent automation
Protection of the cast iron heat exchanger against condensate
Chimney draft control
Overheat protection (pump overrun)
Flame control
Circulation pump anti-blocking system
Frost protection
Limitation of frequent switching on of the boiler
Possibility of installing a fan for the forced removal of flue gases
Cooling circuit (prevents the temperature of the coolant in the boiler from rising above 1100C)
Resistant to complex hydraulic conditions
Delivery of the boiler already assembled
Possibility to replace middle cast iron sections
Ease of installation, care and maintenance
Possibility of work on the main and liquefied gas
* When requesting prices or ordering, please let us know that you received the information from our website.
