Tires that have fulfilled their original purpose can serve a long time for other purposes. For example, tires are good in construction, in laying foundations, in erecting walls, both as fences, and for the purpose of constructing an entire house. Let us present below 10 photos of the use of tires in construction. It is possible to build a house from tires, and do it all with your own hands.
They turned out to be excellent houses, several dwellings under one roof.
The workers have already built the circular wall; all that remains is to work on the roof.
In this example, the turbine-shaped house is ready, equipped with a roof, special beams are used, and there is a kind of veranda under which you can stand in inclement weather.
A real DIY tire house is original and practical, even the exterior decoration is done, such a house resembles a kind of cake.
Huge tires served the purpose of building a small hut.
The work is progressing, the job is done, the base and walls are ready, all that remains is to equip the roof.
A small house, but low costs will gather many people under this roof.
Capital houses, although the basis was tires.
This structure looks more like a dugout, but tires were necessary here.
The finished construction of a house made from tires will provide protection from bad weather and intense heat.
What you can make from tires (with your own hands) - photo report: 10 ideas
Tires are one of the most multifunctional materials; from it you can make furniture for home and garden, a wide variety of tables and chairs, children's swings, labyrinths, a variety of decorations for the garden and much more. Let's imagine what you can make from tires with your own hands in 10 photo essay ideas.
An original crocodile made from a tire, covering a hatch on a personal plot.
An excellent example of country furniture made from tires.
This composition has no equal; a few tires and a little fittings can create a real masterpiece.
Excellent round table made from an old tire.
A swing for children made from old tires will always be relevant in the yard or on a personal plot.
A car made from tires for the playground, original, fun and without unnecessary expenses.
A donkey with a flowerpot made from tires can even decorate a park.
A “happy” piranha will decorate the garden and arouse curiosity among friends and neighbors.
Wonderful firebirds can become not only a beautiful decoration for the site, but also a wonderful place for your child to play.
A labyrinth of tires for a children's playground is an excellent solution that will always find a response in children's fun.
The roof of my house is a shelter from all bad weather, as well as from adversity of a very different nature. Roofs are now made to suit every taste, from classic slate, tiles, corrugated sheets, to soft roofing and the latest fashion trends. This includes flexible tiles, membrane roofing, self-leveling. Let's talk about roofing made from tires. Let's present 10 ideas for using do-it-yourself tire tiles.
A roof dome made from tires is the right solution, it’s easy to make, and attaching it won’t be difficult.
Covering the surface of the walls and roof with tires will protect you from moisture and any bad weather.
But this structure is made entirely of tires; the roof and walls are all made from broken tires.
Tire shingles will last a long time.
Synthetic roofing is an excellent and inexpensive solution.
Car tires are a great idea for creating a roof for a house, the following example is a clear confirmation of this.
Another example of a roof made from car tires - everything was done by hand.
A roof made with your own hands from treated tires is a durable solution.
Another example of a roof made of tires in a kind of “gazebo”.
Amazing tire tiles on a beautiful, luxurious country house.
DIY car made from tires. 12 super ideas for the playground
It is interesting that from childhood, children develop an interest in mechanisms. In this situation, in order not to be afraid that the baby will climb where he shouldn’t, it’s worth creating an analogy for him, there will be no limits to happiness. Just as wooden horses used to be made, now children's cars are made from outdated tires. Below are 12 super ideas for a playground made from tires.
Great idea from tires, it turned out to be a super crossover, an excellent sports car.
The car, which resembles a tank with a sight, is great fun for kids.
A car made of tires that also doubles as a sandbox.
Machines - tractors, a bold and bright solution for skillful hands.
The car is made of tires, with children's chairs installed as seats.
A car for a playground made from tires will always please the kids.
An excellent hypercar made of tires, designed for four seats.
The car is made of tires, spacious, there is enough room for everyone.
And here is a tank made of tires, an excellent solution for a children's playground.
Single-seater, comfortable, dad did his best.
At least four kids can sit on this tire machine.
An excellent car made from tires, even the most irrepressible child can handle it.
DIY tire well (decorative) -10 photos
A great idea for a summer cottage is to create a well from tires. The tires themselves are of regular round shape, durable, and can be at hand in any household. Moreover, three tires are enough for a decorative well, a well - a flower bed. It is easy for a skilled owner to build such a well. And if you decorate it beautifully and decorate it, it will be a kind of masterpiece on your personal plot.
A wonderful well made of tires; this model also has a roof made of tires.
The following photo shows the stages of creating a decorative well.
A great idea for a well decorated with stone, it turned out to be a very realistic well.
Tire decoration in the form of a “red brick” well.
An excellent decoration for the garden, in the form of a turquoise tire well with elegant flowers in a blue pot.
“Birch motifs” are good in any interpretation, as well as in creating a decorative well from tires.
A simple craft, it would seem, but a flower garden in the shape of a well will always decorate a personal plot.
A well made of tires, decorated with African giraffe motifs, is a great idea for children's games.
In the next work, the tires are decorated with cement, everything is simple, but quite attractive.
A wonderful decoration for the garden is a full-fledged decorative well with a roof and a bucket that goes into the flower garden. The decorative white pebbles bordering the well stand out effectively.
DIY chairs made from tires - 12 photos (The best)
Furniture for the home, cottage or garden performs a completely natural function of convenience and comfort. However, the creation of furniture can be approached from an alternative point of view; furniture is created from the most controversial materials, such as tires or tires. Armchairs made from tires can be made with some designer finds, which we will present below in 12 photos.
Garden set of chairs made of tires with air-covered seats and backs.
Blue painted tire chairs, in which even the armrests are made of the same material.
Armchairs made from car tires, where the back smoothly transitions into the armrests.
A beautiful invention of armchairs and a table for a summer cottage, which ensures comfort and coziness in nature.
The fabric-covered tire smoothly turned into a mini chair.
And here are also variations of chairs made from tires with intertwined seats.
This “brutal” design of the chair will inspire its future owner.
Such a large set of chairs does not require a company of ten people.
The next chair can compete in style and beauty with other works.
The set “Armchairs, ottomans and table” invites you to have a tea party on the lawn.
Covered tires gave new life to obsolete items.
Such a chic red set of chairs and a table ensures 100 percent relaxation and a lot of positive emotions.
The foundation is the basis of any structure, from a small outbuilding to a solid house. The reliability and durability of the erected structure depends on its quality, so the construction of the foundation always requires large amounts of material resources. More recently, car tires have been used for this purpose. The construction of such a foundation is accessible to every owner, since it does not require special knowledge and skills, and tires can be purchased without extra financial investments. However, experts limit the range of applications of this material.
In what cases is a tire foundation used?
Professional craftsmen who build foundations and analyze the behavior of this or that material during operation have concluded that a foundation made of tires is not able to cope with the load from the walls of large buildings. Therefore, it is recommended to use used tires in the following cases:
- During the construction of a one-story country house, the walls of which are planned to be built from wooden beams.
- When erecting frame structures with a low total mass.
- For arranging buildings for household and household purposes on a summer cottage, including sheds, summer kitchens and toilets.
- During the construction of baths and saunas.
- When constructing the base for a gazebo.
- As a base for fencing.
It is better not to use waste tires for the construction of capital structures, as this can cause unpleasant consequences.
Pros and cons of a tire foundation
The basis of car tires has a large number of advantages:
- Minimum costs for purchasing material. Used tires can be purchased at service stations and auto repair shops.
- High strength characteristics. A tire foundation can compensate for any movement of weak and unstable soils.
- Ability to withstand significant loads, up to several tons.
- Excellent waterproofing properties. A support made from car tires will reliably protect the main structure from the negative effects of soil moisture.
- A tire foundation will reduce the impact of the soil during temperature changes.
- Possibility of construction without the involvement of professional builders and a large number of people.
- Long service life.
- Convenient transportation due to the low weight of the material.
Among the disadvantages, one significant point can be highlighted: when exposed to sunlight and at elevated temperatures, car tires emit toxic substances and a synthetic odor into the atmosphere. However, it should be noted that this kind of problem can be solved by insulating the material using heat-resistant paint.
A set of necessary tools and materials
To build a foundation from used car tires, you should prepare the tools for the job in advance:
- Shovel and rake.
- Device for soil compaction.
- Construction level.
Also, to build a foundation of this type, it is necessary to prepare the following materials on the site:
- Directly car tires.
- Sand and crushed stone.
- Whole or defective bricks.
- Boards or plywood for making formwork.
- Available waterproofing material, most often roofing felt.
- Metal reinforcement bars.
Types of tire foundations and stages of their construction
Despite the high load-bearing capacity, it is better to build a tire foundation for lightweight buildings. Depending on the method of laying and placing the elements, there are two types of bases: slab and columnar. In the first case, the tires are distributed over the entire area of the proposed foundation, tightly packing the elements. The second type involves the construction of original columnar supports from tires, followed by filling their internal space with concrete mortar.
When building a foundation from car tires, it is important to select elements of the same brand and size. In this case, you can get a reliable and durable design.
Construction of a slab-type foundation from tires
A slab-type base from used tires can be made according to the following scheme:
- The site is being prepared for construction. During the work, old structures, large debris, trees and excess vegetation are removed.
- Remove the top fertile layer. The optimal depth of excavated soil is 15 cm.
- Level the site, checking its horizontalness using a building level.
- Lay the tires, pressing them tightly against each other. To obtain a more durable base for a future structure, it is recommended to lay tires in two layers.
- Cover the inside of the tires with gravel or broken bricks, as well as the free space between them. At the same time, the space inside the tires is filled by 85 percent. It should also be remembered that the use of sand as a filling material is undesirable. This can cause shrinkage of the base and deformation of the main building.
- Waterproofing material is laid on top of the tires; most often at this stage, roofing felt or linoleum sheets are used.
- Formwork is installed around the perimeter of the resulting base, using pre-prepared boards or plywood. It is best to put together panels from these materials; this will facilitate both the assembly of the formwork structure and its dismantling. The formwork should have a height of 10-15 centimeters.
- Inside the formwork, metal reinforcement bars connected into a mesh with a certain cell size are laid directly on the waterproofing layer. In this case, the rods must be connected using soft wire; welding is not recommended in this case. Reinforcement with a metal frame will make the base more durable and reliable.
- The entire structure is filled with concrete mortar, for the production of which high-quality cement, fine sifted sand and tap water are used.
- The concrete is carefully leveled and left to dry completely.
- The formwork structure is dismantled.
Columnar foundation made from car tires
A columnar base made from used car tires is resistant to any ground movement, which makes it possible to use it in regions with high seismic activity.
To independently build a columnar foundation from tires, you can use the following scheme:
- At the construction site, a foundation pit is prepared; its depth should not exceed 40 cm. The bottom is carefully leveled and compacted using a manual device.
- Set up a waterproofing cushion of sand or fine crushed stone and compact it thoroughly.
- According to the building plan, pegs are placed on the site, marking the places where it is planned to place columnar supports made of tires.
- Install car tires, while controlling the location of the peg directly in the center of the element.
- The installed columnar supports are leveled in height using a building level, rule or long board.
- The inside of the tires is filled with crushed stone, construction waste or fragments of bricks. In this case, you should leave 5 cm blank.
- The filler is moistened and filled with concrete mixture. Fill the remaining space with gravel, leveling the surface of all tires.
- The pillars are left until the concrete has completely dried. To protect against cracking, you can use plastic film to cover columnar supports made from car tires.
- Install the harness from timber.
A foundation made from car tires can be called the simplest option for foundations for small buildings for household and household purposes. Simple installation and operation make this base popular among private developers. In addition, a foundation made of tires perfectly protects the structure from soil moisture and prevents its deformation under the influence of various soil movements. The main condition for the installation process is compliance with the rules for laying tires and the sequence of actions.
The foundation on tires is a completely new type of foundation that can be made both under a small building and under a private house. Moreover, you can do this yourself.
Characteristics of a tire foundation
By using recycled materials, you can significantly reduce the cost of any construction, especially when it comes to such major projects as a private house or bathhouse. You can succeed quite well in this if you use used tires to build the foundation. This material has many advantages:
- long service life;
- seismic and wear resistance;
- environmental friendliness;
- accessibility;
- elasticity;
- ease of construction;
- no need for waterproofing;
- high reliability.
The author of the foundation made from unnecessary car tires is a resident of St. Petersburg, Mikhail Semykin. This structure is named in his honor. Initially, he used trolleybus tires for construction. After such a foundation stood for more than a year, and no changes were found in the original design, Mikhail developed a technology, which he later patented. Proof of the reliability of the tire foundation is his personal three-story house with an area of 260 m2.
Residential buildings can also be built on tire foundations.
Tires also have one serious drawback, which, however, is quite easy to eliminate - the material can emit harmful substances at high air temperatures. To avoid this, tires must be insulated from direct sunlight.
The use of this type of tire makes sense in seismic areas, on heaving soils, as well as in areas where permafrost is observed.
Types of tire foundations
There are two types of foundation arrangement for buildings made of this material:
- slab;
Slab foundation can be used for solid buildings
- columnar.
A columnar foundation made of tires is suitable for not very heavy buildings, for example, a bathhouse
The differences are that in the first case, tires are laid over the entire area of the construction site. In the second, only individual pillars are made from tires, on which wooden beams are subsequently laid. It is the columnar foundation that is more reliable, so it can be safely installed in regions with seismic activity.
Photo gallery: using tire foundations for different types of buildings
Even heavy houses made of logs can be built on a foundation made of tires. A timber bathhouse looks great on a foundation made of tires. Frame structures are lightweight, so they are often placed on tires
For cabins and outbuildings, the foundation made of tires is the second most popular after concrete blocks.
Tire foundation: step-by-step installation instructions
Making a Semykin foundation with your own hands is quite simple. But remember that for this you need to bring a large number of car tires to your site.
Foundation for a residential building
This type of foundation is a slab covering the entire area of the site allocated for construction. The sequence of work is as follows:
- Cleaning the area of debris and vegetation. Particular attention should be paid to removing tree roots. The fertile layer of soil must be removed (about 20–30 cm).
- Laying tires in two layers. This is necessary to increase the strength of the foundation.
Tires can be laid on sand or directly on the ground
- Filling the voids between tires with fractional material. The internal voids of each tire also need to be filled, but not completely.
The inner cavities of tires should be filled with sand or gravel
- Flooring waterproofing material. They can be roofing felt or linoleum.
- Installation of panel formwork. It must be removable. It must be installed around the perimeter of the foundation. The height of the finished formwork must be at least 10 cm.
- Formwork reinforcement. The associated reinforcement must be laid directly on the waterproofing layer.
- Pouring the formwork with concrete mixture. It is made from cement, sand and a small amount of water.
The formwork must be placed around the perimeter of the foundation
- Dismantling of formwork. This can only be done after the concrete has completely hardened.
Video: construction of a slab foundation from tires
Foundation for bathhouses and other small buildings
This type of tire foundation is recommended to be installed under light buildings, for example, a bathhouse or a barn. It is the columnar foundation that can be the optimal solution on excessively heaving soils or in areas with increased seismic activity.
To build a columnar foundation, you need to perform several steps:
- Construction of the pit. To do this, the surface of the area needs to be leveled, covered with sand or small crushed stone. This pillow must be properly compacted.
Before starting work, it is necessary to remove all vegetation from the site and remove the top layer of soil.
- Marking the territory. To do this you need to use pegs.
- Laying car tires. This must be done so that each peg is located in the center of the tire.
- Alignment of pillars. The building level will help with this.
- Filling voids. Small crushed stone or broken bricks are ideal here.
Horizontal timber frames are laid on tire poles
Video: do-it-yourself Semykin columnar foundation
Secrets of building a foundation from tires
In order for such a foundation to stand for a long time, there are certain rules, compliance with which is mandatory:
- It is not recommended to use tire foundations for the construction of massive buildings made of brick or concrete blocks;
- the tire foundation should be shallow;
- tires must be laid strictly horizontally, so when installing the first row you need to carefully control their position with a building level;
- if desired, the protruding parts of the foundation can be lined with decorative material;
- The diameter of the tires should be the largest you can find, since larger tires have increased strength.
Man has an inherent spirit of invention. And if a rationalization idea, when implemented, can bring enormous benefits and become in demand among others, then such an idea simply has no price. A DIY tire foundation is a great idea that creative people came up with, combining the parameters of stability and efficiency in the foundation.
For which buildings is a tire foundation suitable?
The technology for such construction of foundations for structures appeared in 2000. For reliable support, any tires are suitable, but massive heavy-duty tires will serve better as a foundation. The rubber they are made of is an excellent elastic material that can even dampen soil activity in areas with seismic instability.
In construction, such a foundation can be safely used for small buildings - bathhouses, garages, outbuildings and for small houses. For large and heavy buildings it is necessary to use traditional types of foundations.
Attention! A tire foundation cannot cope with the load exerted by the walls of large houses, and its use for these types of structures can lead to the destruction of the building.
Advantages and disadvantages of a tire foundation
Such a foundation has a sufficient number of advantages, among which are:
![](https://i0.wp.com/bouw.ru/userfiles/1328_6.jpg)
But this basis also has some disadvantages:
- The large width of the tires creates difficulties for subsequent lining;
- When tire rubber is exposed to large doses of ultraviolet radiation, they can emit substances harmful to humans and the soil (therefore, it is recommended to bury them in the ground).
How to make a foundation from tires
In order to make your own foundation from tires, you should ensure that you have the following materials and tools:
- Required number of tires;
- Shovel - for digging a pit;
- A rake or other tool to help level the surface;
- Gravel and crushed stone, for filling voids between tires;
- Sand - for adding to cement mortar;
- Brick fragments - to fill the space inside the tires;
- Ruberoid - as a waterproofing and leveling layer;
- Boards - if it is necessary to install formwork;
- Reinforcement to strengthen load-bearing capacities;
- Construction level for leveling the surface.
In addition, you may need other elements necessary for the construction of the foundation.
Tires can be used to build both slab and columnar foundations, but the technology for installing them is slightly different.
Slab foundation made of tires
Such a base is like a slab, the structure of which is made up of used tires. In this case, the following types of work are performed in the specified sequence:
![](https://i0.wp.com/bouw.ru/userfiles/1454_3.jpg)
It takes 7 to 10 days for the formwork to harden, after which it can be dismantled and work on waterproofing the base can be carried out.
Columnar foundation made of tires
Such a base requires more work, but has increased strength characteristics, it is more reliable and durable.
The technology for installing a columnar structure is as follows:
- The area is cleared of garbage;
- The future foundation is marked with marks at the corners;
- The top layer of turf is removed;
- A pit with the required parameters is dug, which is filled with crushed stone and compacted tightly;
- At the places where the tire poles are installed, pegs are installed and driven into the ground;
- One or more tires are put on each peg, depending on the required height of the foundation;
- Using a building level, the general position of all tires is leveled horizontally;
- All tires are covered with a sufficient amount of crushed stone and filled with concrete mixture;
- After hardening (about 7 days), work is carried out on installing the strapping beam.
There is another simple way to quickly and easily install the base of a building from old car tires. It is also highly durable and reliable. Tires are laid along the perimeter of the proposed building, after which they are tied with metal channels. First, a concrete solution is poured inside each tire, and an anchor is inserted inside.
Other Important Points
As if it is necessary to construct any type of foundation, such a foundation must also be calculated depending on the type of soil, the passage of groundwater, and other atmospheric external factors. Such foundations are not recommended in hot climates, but they cope well with seismic vibrations, damping them without damaging the building.
Tires should be made of a fairly dense type of rubber, but not have the largest diameter (like construction equipment tires). The large width of tires can make choosing a facing material difficult.
In order for such a foundation to serve for a long time and at the same time to reliably and firmly hold the erected building, it is necessary to correctly carry out all the technology for its installation, as well as provide reliable protection from the influence of sunlight.
Historical excursion
The progenitor of the use of such material for making a foundation was a resident of St. Petersburg, Semikin M. He not only tried this option when building his own house, but also received a patent for the proposed invention. He first tried making a base out of old used tires for his garage. Convinced of the high strength and reliability of the structure, Mikhail used it to build a residential building. At first, the attitude towards the self-taught rationalization proposal was quite skeptical, but given the fact that the first foundations built in this way still perform their functions well, they began to turn to the craftsman to exchange experiences. Over time, this technique and materials became popular among builders.
As can be seen from the example of the article, even the most incredible materials can become an excellent means for laying such an important element of any structure as the foundation.
Hello to all guests and blog readers. In this article I will tell you how I made the foundation for my house. As you probably already understood from the previous article, my foundation is unusual.
Having studied many types of foundations, I came to the conclusion that a foundation made of tires for a house, in my case, would be the most appropriate.
Why did I come to this conclusion? Read the article and find out everything!
A short outline of the article:
- Why like this?
- Description of the operating principle
- Comparison with other types of foundations
- Who came up with such a foundation?
- Implemented projects
- Step-by-step implementation of a tire foundation from me
- What to do next with the base?
Now let's go over each point in more detail.
Why did I choose this type of foundation?
At first, for quite a long time I could not decide what type of foundation I should choose. I didn’t do what most builders in our area did. But what they do here is quite original: They pour out a fill of ASG, and place the log house directly on it; they also fill up a pile of earth onto two or three crowns from the inside of the log house.
I just can’t understand how it should work, the main principle of insulation is to always do it outside, and the principle of the foundation is to get off the ground and give the building stability...
The photo above shows what it looks like in my home.
At first, of course, I was skeptical about this; after all, the wheels are designed for something completely different. But then, delving deeper into the principle of its operation, I realized that this was simply the ideal option for me.
According to these criteria, this option for the foundation of the house suited me:
- Smoothing out seasonal ground movements
- Large support area
- Ease of construction
- Low cost
- Durability
- Seismic resistance
- Reviews from those who have already implemented this version of the foundation
To understand how it all works, let's move on to the next point of the plan.
Description of the operating principle
First, let's look at a separate area with one tire. As you can see, the construction of a tire foundation is extremely simple.
![](https://i0.wp.com/start-for.ru/wp-content/uploads/2016/03/skhema.jpg)
This is a tire laid on the ground, stuffed with what you have, and the grillage of the house is laid on it; of course, we don’t forget about waterproofing, between the grillage (house frame) and the wheel.
Since I live in an area where the freezing depth is very deep, in some places it reaches 3-4 meters (somewhere there are even areas of permafrost), plus a high groundwater level is added to everything, the movements in our soil are simply catastrophic. !
Look at what our fences look like a few years after installation... In three years, the right post has grown by 12 cm.
![](https://i1.wp.com/start-for.ru/wp-content/uploads/2016/03/zabor-1.jpg)
People dig huge trenches and lay powerful metal connections between gate posts and gates, only to ensure that the gate opens the same way all year round...
Something got distracted. So, a columnar foundation made of tires helps reduce the shear forces of the soil in relation to the house. Tires have a damping property, and when pressure is applied to a certain area, they expand or bend, reducing the risk of the grillage shifting.
Such supports are considered a columnar type of foundation. Only the columns are not buried in the ground, but lying on the surface. Well, the support area of the wheels is also quite large.
Now let's see what happens when increased pressure appears in any area of the tire lying on the ground.
![](https://i0.wp.com/start-for.ru/wp-content/uploads/2016/03/Davlenie.jpg)
When this effect appears, the walls of the tire begin to move apart, albeit slightly, but sufficiently to reduce the transmitted pressure on the structure lying on it.
Almost the same effect occurs when pressure is applied to the entire tire, it’s just that the whole tire is slightly deformed, and the adjacent supports will receive less load, while the shift of the grillage will be insignificant.
The support area of the base of a house of this type allows the construction of buildings also on soft soils. Where houses usually sink, such supports will help you out; they will be much lighter than a concrete foundation of similar size, and will help you build a house even on peat soils.
I think the principle of operation is clear, now let's compare the different types of foundations with a tire foundation.
For convenience, I compiled a table with the main criteria that guided me when choosing the foundation for the house.
Comparison of tire foundations with other foundations
The choice was obvious to me, and I decided to build such a foundation for the house.
Where did the legs of the tire foundation come from?
Having studied the sources, I came to the conclusion that people have been using such supports for quite some time, but they have become more widespread thanks to the Internet; on one forum house there is already a third thread discussing the foundation for a house on tires.
There is a patent for such a foundation, comrade Mikhail Egorovich Semykin, who has patented the technology for constructing foundation supports using tires. His tires work to increase the area of support for the foundation; the soil is swampy and does not hold the load well. This is what it looks like for him.
![](https://i0.wp.com/start-for.ru/wp-content/uploads/2016/03/semykin.jpg)
Where: 1 – concrete slab, 2 – Linoleum (Roofing felt), 3 – tires.
How I made the base for the house
Let's look at how I made such a foundation. I'll try to describe it step by step. First, let's decide on the materials and tools that we will need:
- Car tires, the size depends on what kind of structure will be built. I took it from trucks, Gaz-66, Kamaz, Gaz-53, I even got one from a laptist.
- Geotextiles, very little of it is needed, it is placed inside the tire before filling it with soil
- Any filler, sand, ASG, clay, or a mixture of them, as an option, whatever is available on the site.
- A shovel, something like this, preferably with a heavy handle - will be used as a tamper
- Tamping, if the shovel has a simple handle
- A car jack, and several bars as long as the spread beads of a tire.
- A pair, or several pairs, of strong hands)))
This is a complete set for building a foundation.
Now the actual process itself. I’ll tell you how I did it, many builders used different methods, but it all boils down to the fact that this method is the simplest, you can find others by searching the Internet.
![](https://i0.wp.com/start-for.ru/wp-content/uploads/2016/03/perekrytye.jpg)
What can you do with such a base?
As an option, you can fill the covers with sand and make a cap in the form of a plinth. It can be finished with stone siding, which will turn out very impressive. But this is only if you make an insulated floor. If you plan to organize a warm underground floor, then I recommend doing what I will do.
This diagram shows what the basement will look like upon completion of construction.
![](https://i0.wp.com/start-for.ru/wp-content/uploads/2016/03/zavalinka.jpg)
Pictured here:
1. cover of the pile
2. the outer wall of the heap will be made of wood and finished with stone siding
3. pile filler – sawdust
4. outer wall of the heap
5. soil
6. tire
7. foam
You can download all the diagrams and the house frame project in one fell swoop by going to where I reviewed my entire construction.
Before filling the sawdust, waterproofing will be laid on the ground to prevent moisture from penetrating into the sawdust, and geotextiles will be nailed to the outer wall and in a circle to the inner wall of the house to prevent sawdust from scattering.
The use of breathable material in the basement is important to regulate the humidity in the underground during the winter. It is not necessary to completely isolate air movement with a vapor barrier.
Well, at this point I consider the topic of the foundation for a house built from tires closed.
Subscribe to blog updates and learn a lot more interesting things, do not forget that I am building a full-fledged estate - this is my main goal at the moment! Read also my other articles about, and, I honestly tried!
Well, that's all for now, see you again!