Decorate an old vase. Original vase decor: new ideas (23 photos). How to make your own fabric vase

What makes our home truly cozy? Of course, nice and stylish little things! An important element that complements the design of your apartment or house can be floor vases.

And here is the good news for you: it is not necessary to spend a lot of money on expensive designer novelties. Floor vases can be made with your own hands, and from rather ordinary raw materials!
Today you will learn how to make a beautiful floor vase from waste material with your own hands easily and efficiently.

Ready to create? Then let's go!

Do-it-yourself floor vase from a jar

Sometimes you can create the most unusual things from the simplest materials. Look at this vase, would you think that the usual three-liter jars served as the basis for it? That's it!

Admit it, you want one? Then take out the reserves of creative energy from your pockets and go!

To create a floor vase from a three-liter jar, you will need:

Two cans with a volume of 3 liters;
One tea saucer;
One plastic container from canned food;
PVA glue;
Cardboard trays for eggs;
Silicone glue "liquid nails";
acrylic paint;
Decor elements of your choice;

Stage No. 1

We create the basis of our vase. To do this, we take two jars, fasten the bottoms with silicone glue, and glue a saucer turned upside down to the neck of one of the jars. It will serve as a stable foot for the future masterpiece.

Then we cut off the plastic container from the canned food and attach it to the neck of the upper jar with glue.
We leave to dry during the day.

Stage No. 2

During this period, we can soak pre-shredded egg cartons in water until completely limp. After that, the cardboard should be squeezed out well and mixed with PVA glue until a homogeneous mass is obtained.
We apply the gruel on the base of our vase in an even layer.
We leave for two days.

Stage No. 3

After the workpiece is completely dry, we level the texture with alabaster.

Stage No. 4

In this form, the vase is completely ready for the final stage of decoration - decoration. Use your own imagination or the tips that we will give below.

Do-it-yourself floor vase from plastic bottles

Another great waste-free recycling option. Do not throw away plastic bottles, you can create real masterpieces for your home from them!

A floor vase from plastic bottles can be made in different styles. For example, an ordinary five-liter bottle with a cut neck, wrapped in thin birch bark, can be an excellent option.

Idea: "Dress" a plastic bottle in a stylish "sweater" crocheted or knitted. Such know-how will pleasantly surprise guests and fill your home with comfort and warmth.

Floor vase made of cardboard and papier-mâché

Yes, yes, you read that right, you can also make a stylish floor vase out of cardboard. It is indistinguishable from an expensive designer one, just believe me. And if you don't believe it, see for yourself.

To create a do-it-yourself cardboard floor vase, you will need:

Cardboard tube (can be taken from under the linoleum roll);
Thin cardboard;
hot glue;
Newspapers and papier-mâché egg trays;
polymer putty;
Sandpaper with fine dusting;
PVA glue;
Acrylic lacquer;

Stage No. 1

We attach a pipe to the cardboard base and draw a shape for the future vase. We make 30 identical patterns, cut them out.

Stage No. 2

We glue the cardboard blanks to the pipe, evenly distributing them around the perimeter. Leave for several hours until completely dry.

Stage No. 3

Glue the base of the vase with pieces of newspaper sheets in several layers.

Attention: the layer of paper must be dense enough so that the voids are not visible during subsequent finishing.

Stage No. 4

We soak egg trays in water, wring out and mix with PVA glue. Apply an even layer on the base, let dry.

Stage No. 5

Coat the vase with putty in an even layer. When the mass dries, we level the texture with sandpaper.

Stage No. 6

We decorate the vase. It is convenient to do this with spray paint of any color. On top, you can finish in the style of decoupage, stucco or apply an ornament manually using acrylic paints.

Stage No. 7

We cover the surface with acrylic varnish, leave to dry.
That's all the tricks. Do-it-yourself papier-mâché and cardboard floor vase is ready. Enjoy!

Floor vase from a pipe

Everything is quite simple here. If after the repair you still have unnecessary plastic or cardboard pipes at home, do not rush to throw them away, it is better to make a wonderful vase out of them.

A stylish do-it-yourself pipe floor vase is easy, practical and beautiful.

Just wrap a cardboard or plastic pipe with newspapers, attaching them to PVA glue, paint white with acrylic paint and decorate.

Idea: use old nylon stockings to decorate a floor vase from a pipe. Soak them in PVA, squeeze them well, and then put them on the prepared pipe. Distribute over the entire area, creating curly folds. Let the workpiece dry, and then paint and decorate to your liking.

Do-it-yourself floor vase from newspaper tubes

The now fashionable paper vine weaving technique allows you to create lovely crafts from waste material.

In order to make a chic wicker floor vase with your own hands, you will need:

Newspaper tubes (about 400 pieces);
PVA glue;
Scissors;

Stages of work:

We carry out cross weaving 4 × 4, then we fix it with one tube around. This will be the basis of our future vase. Then we perform seven rows of ordinary circular weaving around the base, gradually spreading one tube at a time.
After that, we begin to remove the walls of the vase, bending and weaving the previously divorced tubes. Moving up, we gradually expand the space of the product up to 22 rows inclusive.
Then we weave evenly without breeding for about ten rows, we cover the product with varnish.
Then weaving continues, narrowing the rows and tilting the tubes inward to the product until about 72 rows.
We expand the neck of the vase for 12 rows and complete the weaving by creating sides in 3 rows. Cut off the rest of the pipes.
We cover the product with a thin layer of PVA, wait until it dries completely. Then comes the final stage of finishing - varnishing. This should be done several times in a row.

DIY floor vase decor

There can be a lot of options for decorating a floor vase, the most trendy of them: wrapping with twine, decorating with glitter, silicone glue, as well as good old decoupage.

Of course, the vase should be decorated in accordance with the style of the room, and the method of its external decoration will depend on this.

Well, since we already have a beautiful vase ready, we can think about how to fill it.

Please note that not all types of homemade masterpieces are suitable for live bouquets, which means that we will also make flowers for floor vases with our own hands.

When creating an artificial bouquet, use the most common tree branches. It looks very beautiful and natural. At the same time, an eco-style vase for greater harmony with the bouquet can not even be painted.
Attaching balls from the remnants of knitting threads to the branches is an excellent and economical option for needlewomen.

In any case, do-it-yourself decorative branches for floor vases have not gone out of fashion for a long time. So feel free to use them in decorating your own home.

No matter how fashion changes, needlework is always in trend. Remember that from the simplest and cheapest materials you can create masterpieces of design art. The most important thing is imagination and a creative approach to business.
Do-it-yourself floor vase is easy, beautiful and stylish. Create and be inspired.

Good luck!

DIY floor vase: secrets, techniques and unexpected solutions updated: April 23, 2018 by: dekomin

Creating handmade original products is a very exciting activity for everyone. And in the process of decorating a home interior, you should definitely include products made with your own hands among the decor elements.

Thus, you can decorate your corner in an original way, as well as save the cost of buying such items that are currently not cheap.

An interesting element in the interior is a vase. But how to make a vase with your own hands so that it brings harmony and beauty to the interior?

Creating and decorating a vase

The most important thing is that the future handmade element fits well into the interior of the house or apartment, so that it does not stand out as superfluous. The design should take place in one shade, and the result should be the big picture.

Photos of vases that can be seen on the Internet are of various shapes and styles.

In modern times, there is a wide variety of styles in the interior.

Before you start creating a vase, you should consider and analyze each interior style, and understand how to emphasize the originality of this style with a vase made by yourself.

Choosing a vase for the style of the interior

Minimalist style. Choose concise and modest forms, the color shades of which are not saturated and restrained; The finish of the vase should be neat.

Classicism style. Symmetrical patterns and drawings are quite suitable here. Preference is given to light shades, and drawings of traditional colors that take place in the design of the entire interior.

Hi-tech style. The most modern materials are used to create a vase. It can be glass, and metal, and wood, and steel. Shapes and finishes are also variable, can have a bizarre and unusual character.

Kitsch style. Strict rules are not needed here, but, on the contrary, preference should be given to refined and non-standard elements. You can combine everything, even the most incompatible with each other. Colors should be saturated. You can also decorate a vase with bright colors and non-standard decor.

Modern style. Abstraction and the use of lines smoothly merging into each other - that's the piquant moment of creating such a vase. Decoupage of a vase is most often created on the basis of materials such as wood and metal.

Avant-garde style. Here you need a rich imagination and creative thoughts in the process. Bright, saturated colors and unusual patterns will be in place;

A beautiful vase in the interior not only complements a certain style, but also speaks of the perfect taste of the owners of the house or apartment, and also pleases the eyes of all guests.

Size and properties of the vase

Ideas on how to decorate a vase are very diverse and everyone is different from each other. But first you need to decide on the size of the future decor element.

The width of the future vase can be different, and, basically, it depends on the personal tastes and preferences of everyone.

Sometimes the width of the vase depends on the style in which the vase is made, as well as on the style of the interior for which it was chosen.
Note!

If the vase is outdoor, then its height should vary between 40 and 100 centimeters. The vase does not have to be on the floor, in most cases it can be placed on a bedside table or on a table.

But on bedside tables and tables, the vase looks beautiful when its size is not so huge. A vase with large dimensions is best placed on the floor, and put beautiful flowers in it.

The material from which you are going to build a vase should also be taken carefully. After that comes the choice of the form of the product. The form can be variable, and is selected at the discretion of the person himself.

The main thing is to turn on full fantasy and harmonize the form with the style of the interior.

vase shapes

The most popular forms that appear in the works of famous interior designers are:

Note!

Rounded shapes. Such forms are suitable for absolutely any style of interior, and it is easy to make it using the papier-mâché technique, taking an ordinary bottle as a basis.

Square shapes. Modern interior styles will harmonize well with such an element of decor. A cardboard box is taken as the basis;

Triangular shapes. The method using newspaper tubes is best suited here. This type of vase looks individual and luxurious;

After the base of the vase is made reliably and beautifully, you can already proceed to external decoration. Various decoration methods are applied at this stage.

Many initially cover the vase with paint or varnish. And then you can create handmade patterns on the vase, or attach some shapes or stickers.

You can decorate the finished vase by putting beautiful flowers, berries, branches, and everything else in it.

Note!

DIY vase photo

A floor vase can become one of the most important home decor items. At the same time, you can even make it with your own hands from different materials. If you know a few tricks, the product will turn out no worse than the store. Ready-made instructions and design examples - about all this right now.

A floor vase can become one of the most important elements of home decor.

Before proceeding with the manufacture of this interesting work, you need to carefully look at the house and try to imagine:

in which part of the vase will look best;
what tones and decor elements should prevail in the finished product;
what flowers and other ornamental plants (twigs) are best suited;
finally, how large a vase needs to be made so that it looks especially good in the interior.

In fact, it’s enough just to “see” the future vase well in your imagination. And to make it easier Here are some ideas for inspiration:

First of all, it is better to determine the size in advance. A vase looks appropriate when it roughly matches the size of the surrounding furniture. For example, it should rise slightly above the sofa or chairs.
In terms of shape, you can choose between rounded and original options. Calm, symmetrical edges are best chosen to create a peaceful atmosphere. And if you want to enliven the space, it is better to make a vase with an original, curved neck, interesting drawings and decorative elements.
As for the color scheme, it is best to make sure that your masterpiece stands out well against the background of the floor, furniture, wallpaper. Otherwise, the vase will literally merge with the rest of the items.

Do-it-yourself floor vase from improvised materials (video)

Choosing decorative branches for a floor vase

The main decor tool that can be put in a vase is decorative branches. A variety of decorations are used - and it is not necessary to choose branches of the same type. You can and often need to combine different options to get more original compositions. Here are a few of them:

Combinations of black and light brighten up the space significantly due to the contrast effect. This gives a light, pleasant look and looks especially advantageous in combination with backlighting.
It has long been a fairly common technique when decorative balls are attached to branches. Here you can choose exactly light products, because on occasion they can be painted in any color, and then the composition will take on a new life.
Multi-colored, wavy branches, collected in a bunch, are in many ways similar to beautiful flowers, collected in a bouquet. And if you put them tightly to each other, you get a very beautiful view - like fireworks.
Finally, branches with leaves or small, bright flowers look very good. They will be appropriate in any kitchen, as they create a very cozy, natural environment.

ADVICE

To create your own unique interior, homemade branches are also perfect. If you collect a few dry branches, clean and dry them further, and then paint them with spray cans, this will not only reduce the cost of the process, but also create much more scope for creative imagination.

The main decor tool that can be put in a vase is decorative branches.

Making a floor vase from waste material with your own hands

Making a floor vase does not necessarily require special skills or special materials. Experience shows that even from waste material you can create a very decent product and decorate it so beautifully that it will be easy to confuse such a vase with glass or ceramic.

In the manufacture of a floor vase, you can even use improvised materials that can be found in any home:

cardboard tubes;
pipes from linoleum;
PVC pipes.

In this case, it is better to take cardboard material, since working with it is very simple. Of course, you can’t pour water into such a vase, but it looks great as a decoration in the house. You will need the following materials and tools:

actual cardboard tube;
cardboard for the manufacture of the case;
a piece of drywall or chipboard for the bottom;
ordinary PVA glue;
pieces of old newspaper for papier-mâché;
paint for applying glue;
knife and scissors;
7-8 egg yolks;
putty;
sandpaper;
compass, ruler, pencil.

Making a floor vase does not necessarily require special skills or special materials.

The most important thing is to determine the height of the finished product. As a rule, the vase should turn out to be at least half a meter, and usually a height of 60-70 cm is chosen. It is according to this landmark that you need to cut off a piece of cardboard tube - the basis of the future craft. It is better to do this with a sharp knife, and the incision must be taken obviously 2-3 cm more, and then simply trim the edges.
Now you need to make a bottom. There are two options here - you can use drywall, or you can take plywood. But in any case, the surface must be sufficiently even so that the product rests confidently on the floor and does not stagger. The circle is first drawn with a compass, and then cut out. In size, it must be obviously larger than the diameter of the pipe (by 4-5 cm). Attaches to the base with glue.
Now comes the most important and lengthy stage. You need to take several sheets of cardboard (they can be obtained by unfolding large cardboard boxes), which should be at least as long as the height of the vase. They draw a contour of identical blanks that will give the vase volume - that is, you need to cut out up to 20-30 identical parts that completely repeat the bend of the product.
And 4 more blanks are cut out together with handles (if the craft provides for such an insert).
Details with handles are glued on each side, 2 pieces, and the rest are glued at a distance of literally 1 cm from each other. This will ensure an attractive appearance and reliability of the entire structure.
Next, you need to wait a few hours so that all the workpieces adhere well to the surface. At the same time, it is better to check again how firmly they are stuck.
In the meantime, you need to make a lot of newspaper pieces, smeared glues - you have to make a surface using the papier-mâché technique. It is important to keep in mind here that it is better to make several layers so that the paper lies as tightly as possible.
Then the egg yolks are mixed with PVA and the entire surface of the workpiece is washed thoroughly, thickly.
Now you need to wait again until it dries, and put a layer of putty.
And when the putty also hardens, carefully treat the surface with sandpaper.
The last stage of work is the most interesting and truly creative. You need to draw a picture or just put a layer of paint from an aerosol can. And now the masterpiece is ready to please the eye.

Gallery: floor vases (50 photos)

How to make your own fabric vase

Now you can consider another manufacturing option - a vase can be made from fabric. For this you will need the following materials:

the basis of the design is a terry towel (a woven napkin is also suitable);
cement and sand;
two standard 10-liter buckets;
water;
polyethylene film.

NOTE

It is better to work in disposable rubber gloves so as not to damage the skin by the action of the cement.

The manufacturing technology is very simple:

First, cement is poured into the bucket (literally half a kilogram) and water is gradually added until a consistency similar to liquid sour cream is obtained.
A towel or napkin is dipped into this solution, and it is important that it is completely soaked.
Now this napkin is placed on an overturned bucket to dry completely. First you need to completely cover this bucket with plastic wrap so that the towels do not stick to the surface.
The bottom surface is carefully smoothed, and the falling folds can simply be straightened out.
The bucket is taken out into the street or placed on the balcony to dry during the day.

In fact, the floor vase itself is already ready. However, you still need to try to make the surface really beautiful and attractive. To do this, we act as follows:

They take 300 g of cement and sand, add one pinch of plaster and dilute the mixture with ordinary wallpaper glue (15%).
Using a brush with this solution, you need to carefully cover the entire surface of the workpiece.
And you can also initially add any acrylic paint to the solution and at the same time paint the craft with processing.

How to weave a floor vase from paper tubes (video)

How to make a large floor vase from burlap with your own hands

And another quite affordable option is to make a floor vase from burlap. To do this, you can even take old material, and also You will need the following materials and tools:

PVA glue or "Moment";
rope (twine);
cardboard tube;
molar tape;
scissors;
ball pen.

The sequence of actions is as follows:

In this case, the main product is also a cardboard tube. It is cut to the desired height, all edges are carefully aligned.
On all sides, the surface is pasted over with molar tape, so that in the end each area becomes quite sticky.
Twine is sequentially wound onto the tape - it is better to start from the inside. Then the workpiece will look very neat.
And in the meantime, quite a lot of decorative elements need to be made from burlap: roses from circles with a diameter of 8-10 cm and leaves (also about 8 cm each, and it is better to highlight the veins and petiole with twine).
Having presented and drawn a drawing in advance, paste over the vase with roses and leaves.

ADVICE

This craft turns out to be especially cozy due to the peculiarities of the surface texture. If you make a small copy of a vase, you will get an excellent case for combs, cosmetics and other pleasant things.

Another quite affordable option is to make a floor vase from burlap.

Decorating options for a purchased floor vase

If there is a purchased floor vase at home, this does not mean that the space for creativity is narrowing sharply. On the contrary, even a finished product can be decorated in such an interesting way that as a result of decoration it will look much more original.

How to decorate a glass floor vase

The glass vase offers a particularly rich range of creative possibilities, as the product is transparent and can be filled with different materials to create an original design. Here are some ideas for inspiration:

spray paint coating - both in one layer and in several colors;
decoration with artificial flowers;
decoration with the help of bulk materials of different colors (beans, peas, cereals;
decoration with twine and textiles.

The glass vase offers a particularly rich range of creative possibilities, as the product is transparent and can be filled with different materials to create an original design.

Unusual decor ideas for a finished floor vase

Here are some interesting ideas for decorating the floor wa PS:

Decor with knitted clothes - by covering a vase or its individual elements with a sweater, you can create a very cozy atmosphere - such a vase looks especially good in the bedroom.
Decorating with twine rope gives the same effect. You can not cover the entire vase, but only the neck or handles.
You can stick roses, leaves, spirals, patterns and other decorative items made of dense fabric in warm colors on the twine.
A vase covered with ordinary pasta looks incredibly beautiful and even mysterious, which then needs to be painted with an aerosol, stylizing the surface as metal.
And if you want to stylize antique, you can decorate with coins, which are pre-painted in dark brown or golden tones - let such a vase attract wealth to the house.

DIY cardboard vase (video)

Thus, you can decorate the house with a beautiful floor vase in any case - both home-made crafts and purchased ones. The main thing is to have a good idea of the future look of the vase and, of course, stock up on inspiration.

The interior of a house or apartment is hard to imagine without figurines, pictures, vases and other little things that make the room more beautiful and comfortable. Also, each woman can add a twist, make the decor interesting and unique. Hand made today is at the peak of its popularity. There are a lot of training videos, photos, master classes, with which you can easily make ordinary things the most unusual, using simple tools at hand. So, we will tell you how you can decorate a vase with your own hands, what you need for this, and what result you can get.

Decoration plays an important role in shaping the overall mood of the room.

Today you can buy a variety of vases - large, small, medium, round, square, asymmetric and so on. But how to make the right choice? It should be noted that difficulties in choosing may arise when it comes to large or floor vases, as they can not fit into every interior beautifully and harmoniously. As for the small round vases, they will suit any interior. By decorating such small vases, or filling them (with decorative pebbles, ribbons, twigs, flowers, etc.), you can complement the interior of the room. Such vases are placed on tables, shelves, window sills, cabinets - anywhere.

They look harmonious, beautiful, interesting, which is why they are so popular among buyers.

When choosing a large vase for a room (office), remember that this item is not so much a functional as a decorative and interior load. Also, do not forget that any piece of furniture, including a vase, can help hide any flaws (if any), present the interior in the most favorable light. If the room is decorated, for example, in a strict classical style, then the vase should match the interior - a strict form, the absence of bright paintings or flowers. Loft rooms are very fashionable today.

For this style, there is a huge variety of vases of various colors, shades and shapes.

Decoration features

You can decorate a glass vase from a variety of materials, from artificial flowers to pasta. Each type of decoration has its own characteristics, technique, as well as the degree of complexity. It is interesting that hand made does not exclude a creative approach, a combination of the most incongruous things. So, you can follow the instructions exactly, or you can add something of your own.

The main thing is that the result brings you pleasure.

What do you need to know about preparation?

Preparation for decorating any vase with your own hands includes several stages.

There are many decorating ideas.

Choice of technique (painting, beads, fabric, etc.).

Preparation of all necessary materials (string, glue, beads, paints, twigs, etc. - depending on the type and technique of decoration).
If you are a beginner and you do not have Hand made practice, it will not be superfluous to prepare video or photo materials with a step-by-step work.
Well, perhaps that's all. It remains only to turn on the fantasy and you can start creating.

DIY vase decor

We will tell you in more detail about the most popular and affordable methods for decorating a vase.

With the help of simple improvised means from an ordinary vase, you can create a unique element of the interior.

Vase decor with stickers

This decor technique is perfect for beginners, as it does not require special skills. In the store, you can choose your favorite stickers for decorating glass vases, find pictures on the Internet and arrange something similar on your own. You can add rhinestones, beads or threads to the stickers.

You can just follow your imagination without looking at any clues.

Filling a vase

It is also one of the easiest techniques. But accessibility and simplicity are combined with stylish and interesting decor. So, for filling, you can take a round vase. Any filling material is taken - lace, twigs, beads, pebbles, starfish, artificial flowers, etc. By filling the vase with pebbles or twigs, and tying it on top with a thick thread or lace, you will make an excellent and very unusual vase.

Also, a regular tall glass is suitable for filling.

Coloring

This is a more complex type of decor. For painting, you will need durable acrylic paint for glass. If you decide to paint the product in one color (without drawings, color transition, etc.), you need to do the work from the inside. They take an ordinary glass vase without drawings (round, square, small, large - the shape and size do not matter) and paint its walls from the inside. Also, for staining, you will need a brush, a clean rag or towel, water, newspaper (film, paper), solvent.

Remember that the vase must be perfectly clean and dry.

Otherwise, it may affect the quality of staining. Also, before the process, it is necessary to degrease the walls of the vessel with a solvent. After waiting for complete drying after the solvent, it is necessary to pour the paint on the bottom of the vase and shake it in a circular motion. Thus, the paint itself will color the walls of the vessel. Then, without waiting for the paint to dry, you need to finish painting the “gaps” with a brush.

Choose a brush of high quality - so that it does not leave marks, and so that the hairs do not come out.

Clothes decor

You can wear a vase, no matter how ridiculous and ridiculous it may sound. For “dressing”, an old sweater, jeans, T-shirts, etc. are taken. An old knitted or woolen sweater looks very stylish and original. You can complement this decor with a twig or a thick thread (string).

To decorate with clothes, you will need the clothes themselves, glue, scissors, twine.

Paper decoration

A vase can be wrapped in beautiful paper, making a neat (or, conversely, careless) bow or knot in the middle, or at the neck of the vessel.

Despite the fact that this type of decor is very simple, it looks quite impressive and unusual.

Pique technique

This is the name of the technique of manual dot painting. Moreover, it can be like bright flowers with a detailed transfer of texture and shades. It can also be stylish geometry - straight lines or zigzags, for example. The second option is easier, so it's great for beginners. You will need masking tape, acrylic paint, or canned paint. By sticking masking tape so that the uncovered areas outline the lines you want to paint over, you protect the rest of the surface from accidental paint. For such a painting, as a rule, black, white, silver or golden paint is taken.

It can also be other colors - it all depends on your imagination and on the general style of the room.

Dot painting, when multi-colored patterns appear on a vase with small dots, is much more difficult. For work you will need acrylic paint, ear sticks, toothpicks, newspaper, solvent. The vase must be washed, dried, degreased and dried again. Then you can get to work. The dots are applied with acrylic paint from thin tubes. Ear sticks or toothpicks correct the pattern. The location and distance between the points depends on the pattern, which should eventually turn out. As a rule, each line becomes staggered.

To make the drawing even and neat, you can first apply the contours with chalk.

stained glass painting

Geometric shapes have always been in fashion. In order to beautifully paint a vase with stained glass figures, you do not need to be a brilliant draftsman. But in order for the composition to turn out neat and accurate, you need to follow the following step-by-step instructions:

Strict geometry is created using adhesive tape.

Initially, it is necessary to degrease the surface to be treated.
After complete drying, the vase must be glued with tape.
Next, put the vase on an oilcloth or newspaper and paint over the areas not sealed with tape.
And the last thing - you need to put the vase in the oven and warm it up at a temperature of 150 degrees Celsius for 15 minutes.

It is important to follow your imagination, combining the incongruous and introducing the most unexpected solutions.

Vase decor with fabric, ribbons and beads

This type of decor implies the presence of these materials. How to decorate with beads, fabric and ribbons is up to you. Also for work you will need threads, scissors, glue.

You can borrow an idea from the Internet, or you can come up with your own personal design.

Decoupage

Decoupage is a technique for decorating with paper. A sheet of paper is cut into small pieces (squares, triangles) and glued onto a vase. So, for example, you can tear out a sheet from a music book, cut it, and stick it on a vase. It turns out that the notes are arranged in an absolutely chaotic order.

This design is quite interesting and stylish.

Decorating a vase with natural materials

Natural material includes twigs, tree bark, cinnamon sticks, cloves, dried berries or flower petals, and so on. Such materials can be taken both for filling a vase and for gluing them onto a vessel. As a rule, a small vase is taken, a glass is also perfect. You can stick tree branches or cinnamon sticks on the walls, and make a bow or knot on top with a not too thick ribbon.

This design looks very warm and interesting.

Decorating a vase with twine or thread

Twine is an ideal material for decorating vases, bottles and other small decorative items. It can also be combined with other materials: buttons, fabric, rhinestones, artificial flowers. In order to fix the twine or thread on the surface of the vessel, PVA glue is usually taken. But some craftsmen also use "Glue Moment" or hot glue.

Natural materials will look original.

Vase decor from lace and ribbons

No less popular and original way to decorate a vase is lace and fabric decor. To work with such materials, you do not need to have any special skills. Most people just look for ideas on the Internet and bring them to life. To do this, they use ready-made lace and fabrics of different colors and shades bought in the store.

PVA glue is used for fastening.

Decorating a vase with pasta

As practice shows, pasta is not only a delicious product, but also a rather original way to decorate a vase or any other piece of furniture. You will need regular store-bought pasta, hot melt adhesive, and spray paint.

The first thing to do is decide on a pattern.

To do this, we recommend that you go online and see the possible decor options from experienced craftsmen. Next, attach the pasta with glue in the same order as in the picture and wait for it to dry completely. And the third stage is painting.

Apply spray paint to the surface of the vase and your artwork is complete.

Stylish vases from plastic bottles

90% of the citizens of our country, after using plastic bottles, simply throw them in the trash, believing that they can no longer be of any use. But it is not so. Creative people often use bottles as materials to create their masterpieces. This also applies to vases.

From plastic bottles, you can create very beautiful and original vases for flowers or decorative trifles with your own hands.

Masters often use the same decoration techniques as for ordinary glass vases: natural materials, fabric, beads, rhinestones, lace, and so on.

But there are also more complex techniques, when the master performs more complex manipulations to bring his ideas to life:

heats the bottle to change its shape;
cuts it and glues parts from different bottles and more.

Decorating a vase, making it original, unusual, or even themed to a certain style of the room, is not difficult at all.

It is enough to have a little patience and a desire to create. A vase, decorated by you personally, will become the most original element of decor.

VIDEO: DIY glass vase decor.

50 original DIY vase decor ideas:

Today, only lazy people do not improve the design of their home. Fashion trends allow satisfying the most sophisticated tastes of demanding consumers. At the same time, at all times there was a demand for decorating the interior with high floor vases. However, their affordability does not always coincide with the desired appearance. Like any other thing, a floor vase can be made by hand. Such a beauty will be in the desired shape, and in the desired color scheme, and much cheaper than their store counterparts.
Materials for work:
Glass jar with a capacity of 3 liters - 2 pcs.;
Tea saucer - 1 pc.;
Plastic container from preserves - 1 pc.;
Silicone sealant - 1 bottle;
PVA glue liquid (construction) - 1 liter;
Building alabaster - 4 tablespoons;
Potato starch - 100 gr.;
Egg lattices - 4 pcs.;
Vegetable oil - 1 tbsp;
Vaseline - 1 tbsp;
Three-layer napkins - 2 pcs.;
Plasticine - 1 box;
Old tube of PVA glue with a narrow nose - 1 pc.;
Glue "liquid nails", white and "gold" paints, blush, eye shadow, face powder, brush, colorless acrylic varnish, water.

Stages of work:
The first stage: we form the basis.
We turn one jar upside down and glue “liquid nails” to it a tea saucer turned upside down.

Glue the bottom of the second can to the bottom of the same can.

Cut off the bottom of the canning container. We glue the inverted container to the neck of the second jar.

Let the base dry for 1 day.

The second stage: we give the vase the outline of the vessel.
Finely chop the egg racks.

Fill with water so that the entire torn mass is immersed in it. We leave for the night.

We wring out the soaked grids.

Tear off large pieces. Fill the whole mass with PVA glue.

Thoroughly, until a homogeneous gruel is obtained, mix the soaked grates.

We fill the space between the neck of the jar and the container with the egg mass.

Apply a thin layer of egg mass over the entire surface of the jars.

We dry the base for 2 days.

We paint white.

The third stage: we apply a three-dimensional drawing.
Print your favorite stencil.

We make cuts along the contours, cut out the necessary points.

We place the drawing on the vessel in a checkerboard pattern in a straight and inverted form (2 times above, 2 times below; top and bottom facing each other).

Draw voids and cuts with a pencil.

Squeeze silicone sealant into an empty PVA tube.

We put a sharp nose on the tube and squeeze the sealant along the contour of the picture.

If necessary, make adjustments with a toothpick.

Dry the sealant for 1 day.

With superficial movements with a large brush, we apply blush toning on the drawing.

Fourth step: make a silicone mold.
Mix potato starch and silicone sealant.

Thoroughly knead until a pasty mass is obtained.

We coat the surface of the figure blank (in this case, a magnet) with Vaseline.

Press the pastry into the flattened dough with the right side down.

Carefully prying with a knife, we take out the workpiece.

Fifth stage: casting the figures.
Lubricate the inside of the silicone mold with vegetable oil (pour it in, then turn the mold over and pour out the oil).

Pour a tablespoon of alabaster (or gypsum) into the container.

Add a spoonful of water there, mix. If the solution becomes thick, add water.

We fill the silicone mold with alabaster solution.

We leave the solution to harden (you can check the readiness by pressing the nail on the figure - the trace should not remain on the surface). We pry the figure with a knife and take it out of the mold.

We repeat the preparation of the solution and pouring 3 more times.

Sixth stage: paint the angels.
We paint over the blanks with white gouache.

The bodies of the angels are matted with face powder.

We dye our hair.

We draw sponges.

Draw the eyelids and eyebrows with a pen.

With white gouache we close the extra layer of powder (next to the bodies of the angels).

Draw the wings in gold.

We apply “liquid nails” on the back surface of the figurines and glue them on the vase.

Step 7: Make roses.
We knead the plasticine, lay it on a hard surface with a thin plate, cut it into squares. In each square we make cuts in a circle from the center.