Gasketed plate heat exchangers varitherm GEA Mashimpeks
VARITHERM plates (VT series) are the traditional and most commonly used plates in the production of heat exchangers. The VT series is represented by 23 types of Varitherm plates. They come in different sizes, corrugation profiles and match different heat transfer and pressure losses. Heat transfer surfaces from 0.05 to 2.5 sq. m. per plate and up to 2000 sq.m. per plate package.
The capacity of plate heat exchangers of the Varitherm series can reach 3600 m3/h.
VT series (Varitherm)
Package may consist of plates of one or more profiles. In the package, each subsequent plate is turned 180 degrees, touching so that channels are formed between the plates. If inserts with different profiles are used in the same plate pack, several types of channel geometries can be created. Different angles of the plate profile provide different thermal characteristics, pressure losses. No more than two types of plates can be used in one package. The ratio of these types of plates is selected in such a way as to fully comply with the desired operating modes with minimal pressure loss. |
Plate material:
- stainless steel;
- titanium;
- hastelloy.
Plate seal material:
- nitrile rubber (NBR);
- ethylene propylene rubber (EPDM);
- Viton (VITON).
Technical characteristics of variable plate heat exchangers of the Varitherm series:
VT04 | VT10 | VT20 | VT40 | VT80 | VT 130 |
||
Power | 1000 | 2000 |
|||||
Max. consumption | m 3 / h | ||||||
Connection dimensions | Painted | ||||||
Frames from | |||||||
Operating pressure | |||||||
materials | Steel | ||||||
Steel, plated | |||||||
Stainless steel | |||||||
Length | |||||||
Width | |||||||
materials | AISI 316 | ||||||
AISI 317 | |||||||
AISI 904L | |||||||
Hastelloy | |||||||
titanium |
Due to the wide variety of plates, plate heat exchangers are used in many industries:
NT-series
Gasketed plate heat exchangers NT GEA Mashimpeks
Improved performance, wider range of applications, ease of maintenance at minimal cost - all these are NT series plate heat exchangers.
The optimized configuration of the profile and corrugations of the plates allows you to achieve more heat transfer power with a smaller heat transfer area due to a more uniform distribution of flows over the entire width of the plate. Naturally, this significantly reduces the cost of the new heat exchangers of the NT series.
The NT plate series expands the scope of heat exchangers. A wide variety of plates allows more flexible and efficient use of plate heat exchangers in various technological processes.
The use of a new type of seal retention and a new special plate design simplifies and speeds up maintenance, as well as guarantees accurate seal retention and self-positioning of the plate pack.
A wide range of NT series plate sizes and profiles ensures optimal heat transfer and minimum pressure loss in NT series heat exchangers
Features of the new NT series<
OptiWave Design
AutoLoc Technology
ECO-LOC system seals
Model | Length (mm) | Initial data: | Plate materials: | Seal materials: |
on request | flange connection | Stainless | Nitrile rubber (NBR); Ethylene propylene Viton (VITON) |
|
NT 100T | 845-1440 | flange connection |
||
NT 100M |
||||
NT 150S | 995-2040 | Width 540 maximum |
||
NT 150L |
||||
NT 250S | Width flanged maximum |
|||
NT 250L | ||||
NT 350S | on request | flange connection |
||
NT 350M |
||||
NT 350L |
GEA Mashimpex plate heat exchangers have found their application in various industries:
Dimensions of interaxal plates of GEA heat exchangers in the table below:
Model | NT100M | NT100T | NT100X | NT150L | NT150S | NT250L | S4 | S8 |
HC=mm | 262 | 262 | 262 | 314 | 314 | 420 | 70 | 70 |
VC=mm | 1113 | 796 | 1519 | 1572 | 1092 | 1999 | 381 | 655 |
Model | NT250S | NT350S | NT50M | NT50T | NT50X | N40 | S43 | S65 |
HC=mm | 420 | 130 | 257 | 396 | 395 | |||
VC=mm | 1406 | 1115 | 1227 | 790 | 1090 | |||
Model | VT04P | VT405 | VT10 Lateral | VT1306 | VT1309 | VT130F | A085 | GL205 |
HC=mm | 61 | 257 | 118 | 450 | 450 | 450 | 580 | 255 |
VC=mm | 480 | 845 | 691 | 1266 | 1639 | 1826 | 1530 | 774 |
Model | VT130K | VT20 Glued | VT20 Loc-in | VT20P Loc-in | VT2508 | VT40 Glued | GL405 | FA184NG/WG |
HC=mm | 450 | 212 | 212 | 212 | 257 | 298 | 405 | |
VC=mm | 1826 | 868 | 868 | 868 | 1227 | 879 | 1530 | |
Model | VT40 Loc-in | VT40M Loc-in | VT40P Glued | VT40P Loc-in | VT80 Glued | VT80 Loc-in | FA192NG/WG | LWC100T |
HC=mm | 457 | 457 | 457 | 457 | 382 | 382 | 550 | |
VC=mm | 1227 | 1227 | 1227 | 1227 | 1526 | 1526 | 1885 | |
Model | VT80M Loc-in | VT80P Loc-in | VT805 | FA157 | FA159 | FA161 | ||
HC=mm | 382 | 386 | 382 | 221 | 310 | |||
VC=mm | 1526 | 1526 | 966 | 984 | 1240 |
You can purchase from us:
- Plate heat exchangers
- Plates for heat exchangers
- Gaskets for heat exchangers
- Accessories for heat exchangers
- Spare parts for heat exchangers
- Means for descaling, cleaning, washing heat exchangers
- Installation (pump) for cleaning, washing the heat exchanger from scale and lime deposits
Service center services:
- Cleaning and washing the heat exchanger
- Chemical cleaning and washing of the heat exchanger
- Collapsible cleaning and flushing of the heat exchanger
- CIP cleaning, washing and flushing of the heat exchanger
- Replacement of plates and gaskets in the heat exchanger
- Heat exchanger repair
- Increasing the capacity of the heat exchanger
MZ Teplo Systems LLC - performs maintenance and repair of heat exchangers in Moscow and on the territory of the Central Federal District.
List of served regions: Moscow, Moscow, Kaluga, Yaroslavl, Tver, Tula, Ryazan, Tambov, Lipetsk, Tver, Smolensk, Ivanovo, Kursk, Kostroma, Vladimir, Bryansk regions, etc....
Improved performance, wider range of applications, ease of maintenance at minimal cost - all these are NT series plate heat exchangers. The optimized configuration of the profile and corrugations of the plates allows you to achieve more heat transfer power with a smaller heat transfer area due to a more uniform distribution of flows over the entire width of the plate. Naturally, this significantly reduces the cost of the new heat exchangers of the NT series. reduces the cost of new heat exchangers of the NT series. The NT plate series expands the scope of heat exchangers. A wide variety of plates allows more flexible and efficient use of plate heat exchangers in various technological processes. The use of a new type of seal retention and a new special plate design simplifies and speeds up maintenance, as well as guarantees accurate seal retention and self-positioning of the plate pack. A wide choice of sizes and profiles of the NT series plates ensures optimal heat transfer and minimum pressure losses in the NT series heat exchangers. As a result - the realization of the highest heat transfer power with minimal pressure loss. AutoLoc Technology The new NT series features a self-positioning insert system. The use of this technology greatly facilitates and simplifies the assembly of heat exchangers: . When assembled into a package, the plates automatically align and self-position. . Misassembly of the plate pack is eliminated, resulting in extended seal life
Peculiarities
The cost of the heat exchanger is determined on the basis of the calculation, which is made on the basis of the questionnaire.
(The most popular positions of the NT100XHV, NT100XH, NT100TH, NT100MH, NT50MH, NT50XH, NT50MHV, NT50XHV, 2NT50MH, 2NT50MHV, NT2LHV, NT250LHV, 2NT100MHV/CDT100TH
Gasketed plate heat exchangers NT Kelvion Mashimpeks (GEA Mashimpeks)
Improved performance, wider range of applications, ease of maintenance at minimal cost - all these are NT series plate heat exchangers.
The optimized configuration of the profile and corrugations of the plates allows you to achieve more heat transfer power with a smaller heat transfer area due to a more uniform distribution of flows over the entire width of the plate. Naturally, this significantly reduces the cost of the new heat exchangers of the NT series.
The NT plate series expands the scope of heat exchangers. A wide variety of plates allows more flexible and efficient use of plate heat exchangers in various technological processes.
The use of a new type of seal retention and a new special plate design simplifies and speeds up maintenance, as well as guarantees accurate seal retention and self-positioning of the plate pack.
A wide range of NT series plate sizes and profiles ensures optimal heat transfer and minimum pressure loss in NT series heat exchangers
Features of the new NT series
OptiWave Design
AutoLoc Technology
The new NT series has a self-positioning plate system. The use of this technology greatly facilitates and simplifies the assembly of heat exchangers: |
![]() |
ECO-LOC system seals
Model |
Length (mm) |
Initial data: |
Plate materials: |
Seal materials: |
NT 50T |
on request |
flange connection |
Stainless |
Nitrile rubber (NBR); Ethylene propylene Viton (VITON) |
NT 50M |
||||
NT 50 X |
||||
NT 100T |
845-1440 |
flange connection |
||
NT 100M |
||||
NT100 X |
||||
NT 150S |
995-2040 |
Width 540 maximum |
||
NT 150L |
||||
NT 250S |
2390 |
Width flanged maximum |
||
NT 250L |
3290 |
|||
NT 350S |
|
Heat exchanger Mashimpeks series NT is a lamellar collapsible heat exchanger. Uniform distribution of flows over all plates is achieved due to the optimized design of the plates, which, with a smaller heat transfer surface area, provide more power. Improved the way non-adhesive seals are fixed. The plate pack automatically aligns and self-positions, which simplifies maintenance by making it impossible to incorrectly assemble the plates.
Improved technical characteristics of Mashimpeks NT plate heat exchangers expanded their scope of application, allowed the consumer to use them more efficiently in various industries (energy, petrochemistry, heating, ventilation, etc.).
Questionnaire for ordering a heat exchanger
The design of the package of plates of the collapsible heat exchanger Mashimpeks NT
Technical characteristics of collapsible heat exchangers Mashimpeks NT series
Heat exchanger model | Length, mm | Initial data | frames | Insert material | Seal material | |
---|---|---|---|---|---|---|
NT 50T | on request | flange connection DN50, max flow 40 m 3 /h | CD series (compact version: 6, 10, 16 bar) | series B (larger version: 6, 10, 16, 25 bar) | stainless steel 1.4401 (AISI 316), titanium | nitrile rubber (NBR), ethylene propylene rubber (EPDM), Viton (Viton) |
NT 50M | ||||||
NT 50 X | ||||||
NT 100T | 845-1440 | flange connection DN100, max flow 190 m 3 /h | ||||
NT 100M | ||||||
NT 100X | ||||||
NT 150S | 995-2040 | width 540 mm, flange connection DN150, max flow 350 m 3 /h | ||||
NT 150L | ||||||
NT 250S | 2390 | width 745 mm, flange connection DN250, max flow 900 m 3 /h | ||||
NT 250L | 3290 | |||||
NT 350S | on request | flange connection DN350, max flow 1900 m 3 /h | ||||
NT 350M | ||||||
NT 350L |
Experienced highly qualified specialists of the company Gazovik - Teploenergo will help you select and buy the necessary gas equipment from a gas filter or valve to a powerful industrial boiler, hydraulic fracturing, modular boiler or ITP. And our logisticians will deliver the ordered equipment to any region of Russia or neighboring countries. You can contact us by multichannel phone 8-800-555-6518 or via e-mail [email protected]