Every day is accompanied by noise. Street, work, home - everywhere we are surrounded by sounds. Some of them are pleasant, others not so much. Noise in sewerage and water supply systems can hardly be called pleasing to the ear. Fluid flows cut into the inner surface of the pipe and cause it to vibrate. This vibration propagates through the fasteners and air through the building structures. Unpleasant sounds are heard. The situation can be prevented by soundproofing means, special thick-walled pipes and fittings (silent sewage), flexible fasteners.
How to make the sewer silent?
There are several methods for solving the problem.
The most banal decision. It is necessary to isolate the elements of the sewer system with conventional materials. Stages of work:
- prepare technical niches for the pipeline;
- wrap the pipes with soft insulation and hide them.
Advantages of the method:
- simplicity and accessibility;
- the noise level is somewhat reduced.
Disadvantages:
- increase in the final cost of work (you have to use additional insulation materials);
- vibrations still propagate through fasteners; The noise problem is not completely solved.
2. Use of silent sewerage.
When installing the sewer system, special thick-walled pipes made of polypropylene are used. Minerals are added to the material, which increases its molecular weight.
Advantages of the method:
- vibrations are damped in the walls of the pipeline itself;
- vibrations are not transmitted to the fasteners.
Disadvantages:
- high cost of materials.
3. The use of fasteners of a special design.
To reduce noise, special clamps are used. Their installation requires certain skills and utmost attention. When the required dimensions are calculated and measured, the necessary parts of the pipe are cut off with an ordinary hacksaw. The edges of the segment are cleaned with a file at an angle of one hundred and fifty degrees. This will allow you to easily install the fastener, prevent damage to the sealing ring, and avoid trimming of shaped parts.
Advantages of the method:
- high level of sound absorption.
Disadvantages:
- the high cost of special clamps;
- installation requires professional skills (even a slight violation of the installation scheme will negate all sound insulation).
Silent sewer installation
The pipeline itself (its direction, slope) is carried out as usual. There are nuances of fastening, the use of connecting clamps.
1. Connection of pipes and fittings.
The edge of the pipe must be filed (correctly, according to the instructions), the inside of the socket must be cleaned of dirt. The sealing ring and the pointed end are also controllable and cleanable.
Apply silicone grease to the smooth end of the pipe or fitting to be mounted. We push the shaped part into the socket until it stops. We mark the place of contact. Then we push the pipe about ten millimeters and leave it like that for fixation.
This ten-millimeter gap compensates for possible changes in the length of the pipeline, which may occur under the influence of temperature inside the pipes.
2. Installation of clamps.
Clamps are needed to fix pipes in the system. Therefore, they are installed immediately under the coupling, which fastens each section of the pipeline.
It is important to observe the step between the mounting clamps:
- ten pipe diameters - for horizontal sections;
- about twenty centimeters - for the riser.
The distance from the pipe to the wall is at least four millimeters.
3. Types of fasteners.
There must be no tension in communications. Fully. Therefore, in a silent sewer, a rigid and floating mount is provided.
The first holds the pipe in all directions, preventing it from moving. To create a rigid mount, noise-absorbing clamps with a rubber sealing ring are used.
The floating mount creates the conditions for longitudinal mobility. To do this, the clamps do not tighten tightly. Sealing gum may or may not be used.
The entire sewer system is fixed so that during operation it retains its position.
Overview of silent sewers
1. Silent sewer Ostendorf Skolan.
Pipes are made of mineralized polypropylene, resistant to high temperatures, light stabilized. Provide a noise level of 21 dB. Are issued with a diameter of 50 mm, 70 mm, 100 mm, 125 mm, 150 mm. Connection - socket. Consolidation – petal, previously built in.
Ostendorf Skolan pipes and fittings can be used in the following areas:
- arrangement of internal and storm sewers;
- risers;
- air extraction and supply.
Requirements for transportation and storage:
- it is necessary to transport pipes by laying them along their entire length (if possible), without bends;
- store pipes so that they do not deform;
- sockets should not experience loads during storage;
- shelf life of sealing elements - no more than two years;
- the maximum height of a pallet for storage is one and a half meters.
Silent German-made sewerage fully complies with the requirements of DIN 4109. It has a Russian quality certificate and has long been successfully used for soundproofing old buildings and new buildings.
2. Silent sewerage SINIKON Comfort.
SINIKON Comfort sound-absorbing pipes are used for the installation of a non-pressure internal sewerage system. They are fully compatible with traditional polypropylene pipes. Silent sewerage SINIKON meets the requirements of SP 40-102-2000, 40-107-2003, is resistant to high temperatures and aggressive environments. The service life is not less than fifty years.
SINICON pipes and fittings are made of PP-N propylene homopolymer with mineral elements. Wall thickness - 3.4 mm (for conventional pipes - 2.7 mm). Noise figure at 2 l / s - 11 dB.
Consolidation - two-petal. Connection - socket. Mounted without special tools and fixtures. Production - Germany.
3. Silent sewer REHAU.
Pipes, fittings and special fastening techniques for risers. Available in diameters 50 mm, 75 mm, 110 mm and 125 mm. The material and fastenings comply with the requirements of DIN 4109 and VDI 4100, native standards SNiP 2.04.01-85.
Withstands high temperatures (up to 95 degrees, for a short time), aggressive environments. It is mainly used for the organization of the internal sewerage system.
Pipes of this brand should not be used in the following situations:
- systems with long-term high temperatures (more than 90 degrees);
- systems that divert effluents with gasoline or benzene;
- outdoor systems laid in the ground.
O-rings are mounted inside the sockets, which allows you to quickly and reliably connect pipeline elements. Pipe cutting can be done with a regular hacksaw or pipe cutter.
Silent sewer Rehau is made of high-strength metallized polypropylene. The service life of these sewer pipes is fifty years. There are options for heating systems, water supply and sanitation.
Ostendorf Kunststoffe was founded on 1 May 1973 by the brothers Norbert and Heinrich Ostendorf. Already in the year of foundation, the production of polymer pipes and fittings made of polypropylene began. In this area, there was a trend of rapid market development, so in a short time the company switched to the production of a complete product program.
In August 2011, Ostendorf opened its own production of sewer pipes and fittings in Russia in the city of Egoryevsk, Moscow Region.
The plant has the latest German technological equipment. Imported raw materials and components are used in production. The quality of products is controlled by German specialists and complies with German standards.
Today Gebr. Ostendorf Kunststoffe GmbH & Co.KG is the leading manufacturer in this market segment. At the same time, sales are carried out through a specialized wholesale trade in sanitary products. The main market for high temperature (HT) products is Germany, but Ostendorf products are also supplied to many countries around the world.
Subsequently, the production of sewer pipes and PVC fittings for outdoor sewerage was expanded. Pipes and fittings are produced with nominal diameters from DN 110 to DN 200. Gebr.
Ostendorf Kunststoff e GmbH & Co. KG has also gained a significant share of the market. Pipes and fittings are manufactured on modern production equipment, some
of them using unique technologies. This ensures economical production with minimal costs.
Technical innovation always comes first at Ostendorf. Thus, after many years of research, the development of a new unusual pipe system appeared.
Silent sewerage system Skolan dB from mineralized polypropylene. Thanks to new developments, Ostendorf has succeeded in minimizing sewer noise in high-rise buildings. The company has developed a special technology for Skolan dB socket connections, which are extremely difficult to form due to the high density of the material.
As the latest product from Gebr. Ostendorf Kunststoff e GmbH & Co. KG can be called a special development KG 2000. This pipe system is characterized primarily by its environmental friendliness. They are used for outdoor sewer lines.
Contrary to the usual product range for outdoor sewage (KG), these products are not made from PVC, but from polypropylene using solid wall pipe technology. A specially designed and patented seal completes this program.
In 2008 Gebr. Ostendorf Kunststoff e GmbH & Co. KG has taken its HT polypropylene pipe system for domestic sewage to an even higher level.
Here, 35 years of experience in the production of polypropylene products has found its embodiment. Products have been created that meet all the requirements of modern piping systems for sound insulation, fire protection and simplified pipe laying with antimeter marking.
All products from Gebr. Ostendorf Kunststoff e GmbH & Co. KG is manufactured and sold in Germany in Vechta. It is subject to constant internal and external quality control.
The company is certified according to DIN EN ISO 9001 and has not only various approvals for use from the German Institute for Building Technology, but also numerous approvals and certificates for other countries for its products.
Sewer pipes and fittings System HT (PPs)
Ostendorf's upgraded pipe system for internal sewerage It fulfills all the requirements of modern internal sewerage systems, from sound insulation and fire protection, up to simplified pipe laying thanks to centimeter markings. exposed to hot water. This is how a high-quality piping system for internal sewerage was created, with the highest
meeting all requirements.
Application of the HT system (PPs) with Ostendorf BS fire collar
The new Ostendorf fire kit is a practical and cost-effective solution for building fire safety. The new generation of Ostendorf BS fire cuffs is distinguished by significantly smaller dimensions and the ability to use them to create a fire seal of pipeline passages through building structures in order to prevent the spread of fire through them in case of fire. In addition, the Ostendorf BS fire sleeve is suitable for all Ostendorf plastic pipes. This property, as well as other remarkable qualities, provides a high level of flexibility for changes in construction projects.
The Ostendorf BS fire collar has been developed and approved for use incl. in soundproof piping systems (Z-19.17-1651). Fire cuff
consists of two halves, so it is possible to install it after laying the pipeline. Thanks to the "zero distance", i.e. the distance between adjacent fire collars can be set to 0, providing maximum design flexibility.
Silence is one of the most valuable blessings for a person. And it is the more precious, the less often we can feel it in ourselves or find it in the world around us. Sewer pipes and fittings Skolan dB
differ precisely in this unusual property - they are not audible.
Nature is an integral part of our life, so it is natural for us to protect it. The sewer system KG (PVC) fully meets the requirements for water resistance, service life and ease of operation. Therefore, it provides reliable protection of the environment from wastewater pollution.
Ostendorf Wells
The Ostendorf manhole system is versatile enough to provide the right solutions to numerous problems in everyday practice. All structural elements are quickly and easily connected to each other and to other pipe systems.
Robust connections and built-in seals guarantee reliable connections in any application. The telescopic tube with cover not only visually harmonizes with the surrounding area. It extends up to 400 mm and is easily adjustable. It is not necessary to determine the exact installation depth. The lid always closes flush with the surface. The telescopic tube always remains mobile and moves along with the soil. This property is especially useful in winter. In addition, the well does not rust.
Thanks to these qualities, the innovative Ostendorf manhole system greatly facilitates the creation of underground sewer networks. Small size with big potential. These are typical inspection wells for external sewage. It is also possible to use it as manholes in parks and squares, in car parks and as drainage wells.
The obvious advantages of Ostendorf polypropylene products compared to PVC sewers from other manufacturers include the low weight of the products, which gives advantages during the installation and transportation of pipes and sewer fittings. In addition, Ostendorf is an environmentally friendly product: 100% recyclable material for pipes and fittings is possible.
Ostendorf Kunststoffe was founded on 1 May 1973 by the brothers Norbert and Heinrich Ostendorf.
Already in the year of foundation, the production of polymer pipes and fittings made of polypropylene began. In this area, there was a trend of rapid market development, so in a short time the company switched to the production of a complete product program.
In August 2011, Ostendorf opened its own production of sewer pipes and fittings in Russia in the city of Egoryevsk, Moscow Region.
The plant has the latest German technological equipment. Imported raw materials and components are used in production. The quality of products is controlled by German specialists and complies with German standards.
Today Gebr. Ostendorf Kunststoffe GmbH & Co.KG is the leading manufacturer in this market segment. At the same time, sales are carried out through a specialized wholesale trade in sanitary products. The main market for high temperature (HT) products is Germany, but Ostendorf products are also supplied to many countries around the world.
Subsequently, the production of sewer pipes and PVC fittings for outdoor sewerage was expanded. Pipes and fittings are produced with nominal diameters from DN 110 to DN 200. Gebr.
Ostendorf Kunststoff e GmbH & Co. KG has also gained a significant share of the market. Pipes and fittings are manufactured on modern production equipment, some
of them using unique technologies. This ensures economical production with minimal costs.
Technical innovation always comes first at Ostendorf. Thus, after many years of research, the development of a new unusual pipe system appeared.
Silent sewerage system Skolan dB from mineralized polypropylene. Thanks to new developments, Ostendorf has succeeded in minimizing sewer noise in high-rise buildings. The company has developed a special technology for Skolan dB socket connections, which are extremely difficult to form due to the high density of the material.
As the latest product from Gebr. Ostendorf Kunststoff e GmbH & Co. KG can be called a special development KG 2000. This pipe system is characterized primarily by its environmental friendliness. They are used for outdoor sewer lines.
Contrary to the usual product range for outdoor sewage (KG), these products are not made from PVC, but from polypropylene using solid wall pipe technology. A specially designed and patented seal completes this program.
In 2008 Gebr. Ostendorf Kunststoff e GmbH & Co. KG has taken its HT polypropylene pipe system for domestic sewage to an even higher level.
Here, 35 years of experience in the production of polypropylene products has found its embodiment. Products have been created that meet all the requirements of modern piping systems for sound insulation, fire protection and simplified pipe laying with antimeter marking.
All products from Gebr. Ostendorf Kunststoff e GmbH & Co. KG is manufactured and sold in Germany in Vechta. It is subject to constant internal and external quality control.
The company is certified according to DIN EN ISO 9001 and has not only various approvals for use from the German Institute for Building Technology, but also numerous approvals and certificates for other countries for its products.
Most of our population lives in high-rise buildings, the sewerage system of which is assembled from plastic pipes. From the point of view, this is certainly good, but there is also a drawback - a high noise level, when being on the 3rd floor you can clearly hear the noise of sewage rushing down the pipe. Nowadays, special materials and technologies have appeared that can effectively cope with such noise effects.
How is the noise problem solved?
- the use of pipes made of special materials, as well as their connections;
- the use of soundproofing materials;
- use of special fasteners.
Let's consider these options in more detail.
Use of special materials. This implies the use of pipes of increased thickness and special silent connections during the installation of the sewer system. They are made from a special type of polypropylene with mineral additives. It seems to be good, but quite expensive.
The use of soundproofing materials. In this case, during installation, it is possible to wrap the pipes with insulation, while the noise level will significantly decrease. A good solution, less expensive than the one described above, but also not 100% eliminating the noise problem due to residual noise on the fasteners.
Use of special fasteners. This solution is not cheap. It uses special fastening elements, which is not easy to install on your own, it is better to involve professionals for this.
As you can see, the maximum noise reduction effect can be achieved using an integrated approach that combines all of the above points.
How to install a silent sewer
Before installing the sewer system, it is necessary to fulfill the requirements that will ensure the quality functioning of the entire system in the future.
- Preparation of pipes according to the given dimensions - first we measure, then we check, then we cut off;
- we form a groove at the end of the pipe at an angle of up to 150 degrees for ease of installation;
- install the sealing ring;
- make sure that there is no dirt at the joints;
- lubricate the outer part of the pipe with silicone grease or ordinary soap - this greatly facilitates the moment of connection;
- we insert the pipe until it stops, and move it back up to 10 mm - this is necessary to compensate for temperature changes in dimensions;
- shaped parts are inserted without a gap.
- Between the pipe and the wall on which the installation is made, it is necessary to leave a gap of at least four millimeters;
- when installing the riser, clamps are installed every 20 cm.
How are pipes attached and stress relieved?
There are two methods of fixing pipes, rigid and floating.
1. Rigid mount. In this case, the attachment point is a rigid clamp that is attached to the wall and fixes the pipe with a rubber ring.
2. Floating mount. Provides movement of the pipe in the direction along its laying. An important point - you can not fix the mount so that the pipe loses its ability to move.
How to fix the pipe to the wall can be found in the video below.
Became their ability to reduce noise from the flowing liquid. For a long time, this problem was solved by wrapping sewer pipes with porous soundproofing material (for example, polyethylene foam) or mounting a special box around them and densely filling it with mineral wool. Relatively recently, a third way has also appeared to significantly reduce the noise of the liquid flowing in the internal sewerage - the use of silent sewer pipes.
POLITEK manufactures pipes and fittings with improved sound absorption for internal sewer systems in accordance with TU 2248-017-52384398-2012 and TU 2248-019-52384398-2012. Outwardly silent pipes and fittings, with the exception of white, do not differ from ordinary polypropylene sewer pipes and fittings for them. White and gray sewer pipes of the same size have almost the same mass; when creating internal sewer systems, they are interchangeable in any ohm combination. The sewer pipes and fittings manufactured by our company, which reduce the noise from the flowing liquid, comply with the requirements of SP 40-102-2000 and SP 40-107-20003.
You can get acquainted with the regulatory documents that determine the permissible noise levels and sound insulation requirements, as well as with other noise protection rules - in.
Advantages of white silent pipes for domestic sewage
The difference between pipes with improved noise attenuation and ordinary ones is in the structure of the material. Silent sewer pipes are made of polypropylene modified with mineral additives. The inclusion of mineral components in the raw material increases the viscosity of the pipe material and leads to a decrease in noise from the liquid to 7–11 dB due to damping (quenching) of sound waves when passing through the pipe wall.
You can learn more about the design features of white pipelines with improved sound absorption, as well as get advice on their installation, at.
You can buy pipes and fittings with improved noise reduction in bulk from the Politek manufacturer at the prices shown on this page. You can order products directly on the website or send a request by mail . Silent pipes for internal sewerage: description, purpose, characteristics, photo, price.
