Crafts from green plastic bottles. DIY plastic bottle crafts step by step for beginners (44 photos). Beautiful baby elephant made of plastic bottles for kindergarten

Many homeowners create all sorts of plastic bottle crafts to decorate their place of residence. You can create real works of art by spending a minimum of money.

Not only decor items are made of plastic, but even furniture. All you need is a knife, an awl and a little imagination.

In this article, we will analyze in detail how to make crafts from plastic bottles with your own hands.

We decorate the site

What kind of home-made products you will not see on personal plots. There are flowers, animals, and trees. You can create beautiful sculptural compositions that will not only decorate the garden, but will also give a great mood.

Let's take a look at a couple of instructions for beginners that make it easy to create crafts from plastic bottles. It will be a palm tree and a pig.

bottle palm tree

To make a palm tree, you need to create a frame. Its length should be equal to the height of the tree.

Bottles of the same size are taken, the bottom is cut off from them and placed on top of each other. Then the leaves are cut out. They are attached to the top of the created structure. When everything is ready, the palm tree is painted green.

Funny pig from bottles

The piglet will look great anywhere in the garden. For its manufacture you will need:

5 l bottle;
four bottle necks for making legs;
one top of the bottle, which is cut in two to make the ears;
tail wire;
two beads for the eyes;
glue;
pink paint.

The parts are connected and fixed with glue. The finished product needs to be painted. You can use oil or spray paint. To prevent the pig from being blown away by the wind, you need to pour sand into it.

In addition to the decorative function, the design can serve as a flower bed. To do this, the top is cut off, filled with earth and flowers are planted.

Crafts from plastic bottles for the garden can serve as flower beds, borders or paths. To make a path, bottles are inserted into the ground with a neck.

Both whole and cut plastic are used. It is important to fill the bottles with earth so that they do not deform when they are walked on.

The use of bottles in the household

Bottles are used for more than just decoration. From them you can make a scoop, a washbasin or a trap for a pest.

Undoubtedly, everyone will need a container for storing any items. To make it, just cut off the neck.

The washbasin is also very easy to do with your own hands. The bottom of the bottle is cut off, and holes are made through which the rope is threaded. The structure is hung in the right place and water is poured. To wash, just unscrew the cork a little.

To make a trap, you need to cut the container in half. To catch insects, some kind of bait is placed at the bottom. For example, sugar syrup with yeast is suitable for this.

You will need hot water in which sugar and yeast will dissolve. The cooled liquid must be poured into the trap. Not only flies and wasps, but also mosquitoes will flock to this delicacy.
Note!

Even a child can make a scoop. First you need to outline its shape, and then cut it out.

Plastic can be used to make flower pots, greenhouses or containers for seedlings. Descriptions of such crafts from plastic bottles can be found on the Internet in large numbers, but in order to create something unique, you need to show your imagination.

It is fashionable to build an automatic watering tool from plastic containers. To do this, cut the bottle, make holes on the sides and put the hose into the neck. With the help of such a device, the plants will be perfectly moistened.

For plants that do not like surface watering, the following device is made. The bottom of the plastic container is not completely cut off. A trench is torn to the side of the plant, where stones are laid. The bottle is instilled upside down.

Then pour the right amount of water to carry out watering. You can place bottles upside down, but in this case you will need to make holes in the container.

Plastic containers are also used to heat plants. To do this, the bottles are filled with warm water and placed around the plant.

Note!

For inspiration, you can see various photos of crafts from plastic bottles. You do not need to make great efforts to make an original decoration or a useful little thing for your garden that will last for many years.

Photo of crafts from plastic bottles

Note!

Surely the inventors of plastic bottles had no idea how widely people would use them. Today, craftsmen have learned how to make a huge number of useful things from plastic bottles with their own hands, from toys to a boat or a house. We will confine ourselves to considering crafts that will help you beautifully decorate your site, garden or vegetable garden.

Unusual qualities of homemade plastic bottles

Plastic bottles are extremely popular among lovers of garden crafts. The explanation for this is simple: on the one hand, the material is easily accessible, on the other hand, it is easy to work with. No wonder there are a huge number of women among the admirers of the "genre".

Note that plastic containers decompose as garbage for an extremely long time, but serve endlessly in the rain and sun in the yard. It's nice to make something funny and useful out of what was supposed to be thrown away. The presence of numerous interesting examples further provokes creative and inventive souls to create something better and more unusual.

Plastic bottles have many colors, crafts from them can be painted and enriched with a variety of decorative elements, which most often is also an improvised material. The use of both small and large empty bottles from 0.5 to 5 liters allows you to create a variety of combinations of shapes. The author of the text sets himself the task of offering you the most interesting examples and acquainting you with the methods of working with plastic bottles with your own hands using several descriptions as an example. Thus, you can both pick up interesting and beautiful homemade products for repetition, and learn how to implement your own ideas.

Please note: it is very important to choose a place for the figurine in the garden where it will harmoniously fit into the surroundings.

Bright crafts and decorations from bottles in the yard

Such poppies always bloom, and they won’t be fined for it.

The brightest decoration in the yard is the flowers. From plastic containers, they turn out great and a considerable number of examples have already been invented. Do you want to build a tree from bottles with your own hands? It's possible!

Winter and summer one color

Probably the easiest plastic bottle crafts to make are mushrooms. Do-it-yourself mushrooms are made extremely simply and very similar to real ones. The mushroom cap is the bottom of the bottle, its stem is the top of the container. You can color them as you wish. It is most convenient to fasten both parts with a self-tapping screw.

To get the characteristic protrusions on the leg of the fly agaric, you can use two bottle necks to make it. Grass can be created from the side of a green container.

In this lake, the water never freezes, and swans always live

The blue lake in the yard is most realistic to arrange from plastic bottles. Its surface, even in the absence of wind, is covered with characteristic ripples. Making such a pond is easy. You need to paint at least 100 bottles of blue paint from the inside, and then bury them in the ground with their neck down. Flowers and flowers are suitable for decorating a pond.

Funny figurines of animals and people for the garden from plastic containers

We are all happy to decorate our garden with crafts of animals, gnomes and people. A considerable number of various figures for the site have already been invented. Interestingly, even when copied, each creative invention has features brought by the author. Nothing prevents you from leaving your “own mark on history” by inventing an original gnome.

All sorts of different animals in the yard and garden

Here are several options for turtle designs. All of them are made from the bottom of a bottle, which resembles the shell of an amphibian. Using paint and other decorative elements, you can create a turtle with a "own face".

The caterpillar in the garden and the garden is quite appropriate. In this performance, she will not turn into a butterfly, but she will not be able to harm either. You can make an insect from the bottoms, lids and bodies of plastic containers. The easiest way is to sequentially collect the top parts of bright green bottles. Inside there may be a wire that is bent on both sides of the figure.

Funny gnomes for the courtyard can be made from a variety of containers. Perhaps, it is impossible to do without the use of paints. A special place in the performance of the gnomes is occupied by decor: let your imagination run wild and try to use everything that comes up. This is exactly the case when you can compose something unusual and your own.

The land with the help of horses in the country has not been plowed for a long time, but the presence of their figures is appropriate and desirable. The body of the horse is most often made from five-liter eggplants, and the legs, neck and muzzle are made from smaller containers. The horse is very similar to the donkey, so when making it, you can use the donkey assembly instructions that follow.

Pigs in the country from plastic bottles - a classic of the genre. Of course, a 5-liter container is best for making a well-fed pig. It is often used as a planter. The techniques for assembling a pig are exactly the same as for a donkey. A description of this follows.

A bright spot on the site will be a fox or bear figurine covered with orange paint. We have already understood that large five-liter bottles are well suited for both the already mentioned and other animal crafts. Here again, fantasy and scenery are required. Assembly - all the same donkey making guide that follows.

It can be said with absolute certainty that it will be possible to build any animal from plastic bottles. Pick your favorite and get creative!

Here are a few more examples of the use of plastic containers for the manufacture of animals. Frogs, hares, bears and sheep - everything is like in a real forest.

Hunting trophy from a plastic container

If you are unable to hunt even with a camera, you can hang a hunting trophy from a plastic canister in your country house. In addition to the container for making a horned head, you will additionally need 30 pieces of multi-colored plugs, a piece of wire with a diameter of 3 mm and self-tapping screws.

Hunting trophy assembly instructions:

Funny donkey from plastic bottles for your garden

As follows from the pictures, donkeys are slightly different. I came up with my own collective image and prepared a master class for you:

To assemble the craft, we prepared 8 bottles. Subsequently, another one, brown, was required to make the mane of the animal.
At a 5-liter eggplant, the neck was cut off and the caps of the foot bottles were screwed on with screws. By turning the screws in different places, you can adjust the inclination of the plugs. It is necessary to use at least three self-tapping screws to fix one cover.
At the container for the head, cut off the neck.
Cut out a blank for the donkey's neck from the middle part of the bottle. In side view, it has the shape of a trapezoid. On the sides of the part, we leave two ledges for which the neck will be attached.
We fasten the neck to the head with two self-tapping screws. They will be inside the body.
We bend the neck to the head and fasten the parts with another screw.
Now we fasten the neck to the body with two self-tapping screws. They will be inside the body.
We turn the neck to the body and fasten it with two more screws from the bottom.
This is what the frame of the donkey looks like at this stage.
Cut out the blanks of the ears from the green bottle. For one ear, you need a quarter of a bottle cut along. In the lower part of the ear, we cut the protrusions for attaching to the head, in accordance with the image.
We bend the sidewalls of the protrusions so that they pass into the narrow slots prepared in the head.
We mark the slits on the head with a marker in accordance with the size of the ear. Their size should correspond to the width of the protrusions on the ear with curved edges. We make cuts.
We insert the protrusions of the ear into the slots on the head of the donkey. After installation, the bent parts will straighten out and securely hold the ear on the body of the animal's head.
This is what our ward looks like with ears. Paint it with gray paint and leave to dry overnight.
Cooking a donkey's mane from a brown bottle. The length of the workpiece corresponds to the length of the neck. To attach the part to the neck, cut out three protrusions in accordance with the image. We imitate hair by cutting through the part with a step of 2mm and not reaching its edge by 15mm.
We bend the edges of the protrusions for subsequent fixation to the neck. We make two blanks for the mane.
On the neck we mark three slots with a marker in accordance with the location of the protrusions on the details of the mane. Their width should correspond to the size of the protrusions on the details of the mane with curved edges. We make cuts.
We bend the edges of the protrusions on the details of the mane and sequentially insert them into the slots on the neck of the animal.
It is convenient to make a harness and a donkey's tail from a garden border tape. From it it is necessary to cut off a strip 15 mm wide and fasten the crafts to the body with five self-tapping screws. The eyes will fit from an old toy. We attach them with double-sided tape. We paint the muzzle and ears from the inside with white paint. Nostrils and mouth are done with red and black paints.
You can harness! We use a plastic box as a cart. The wheels are good from a used children's toy. They can be mounted on the axis of the welding electrodes. Shafts are made from thin branches. For good stability in windy weather, sand should be poured into the bottles of the donkey's legs.

Do-it-yourself handmade is sure to come in handy on the farm

Our articles about useful homemade products for your own yard from plastic bottles

You can read the topics or in our articles. Here is a list of a few more articles about useful country products:

Interesting examples of creations from containers for household purposes

As you can see, quite monumental structures can be built from plastic bottles. However, many of us, having appreciated the scale of the work and the large number of bottles, are ready to say the words from the old joke: "I won't drink that much." It is up to you to decide which homemade products are good, and we offer a master class on making a prosaic broom from plastic bottles with your own hands.

Step by step guide:

Collecting crafts, we set the task of using fewer bottles and getting a panicle of sufficient rigidity. However, it was not wide enough. To solve this problem, the entire length of the bottle should be used for blanks.

In this case, containers will need twice as much. In this embodiment, to ensure sufficient rigidity of the broom, it will have to be tied with twine, as in the photo.

Together with the broom, we made a dustpan from a plastic container. To implement such an idea, it is better to use a thick plastic canister. We cut out the part in accordance with the image, put it on a wooden handle and get a scoop. The scoop does not dig the earth, but it is suitable for sand and cement and works in tandem with our broom!

Creative people will always find a way to make unusual things out of ordinary things that we do not pay attention to, and sometimes just throw them in the trash.

So plastic bottles in skillful hands turn into real works of art. From plastic bottles you can make interesting furniture, home decor items.

What are the advantages of gizmos designed from plastic bottles?

Many summer residents, having seen useful material in this everyday material, can build from it:

greenhouse;
country shower;
small shed;
playground equipment;

And other interesting buildings and structures.

Why is this material so in demand? First, it is a very accessible material. If everything is done with special care and thoroughness, then the structures will turn out beautiful and will surprise even a professional designer.

The second important advantage is that by not throwing plastic bottles in the trash, you help to save the environment. Plastic is a difficult to decompose material.

As for the disadvantages of this material, it is that if you want to assemble a large structure, you will have to collect the material for a long time, because there are all kinds of bottles.

But many people can collect the necessary material in a fairly short time. For example, by cleaning the territory of the park, thereby doing a good deed for nature. Someone asks friends and neighbors for help, and they bring their own bottles.

Let's return to the advantages of using plastic bottles as a building material. Plastic is a very soft and easily processed building material. Anyone can learn how to handle it.

Having received the initial skills in working with plastic, you can begin to create masterpieces. It is better to act according to the season.

By the summer, it’s good to make structures for playgrounds, some summer cottages, for example, showers, in autumn and winter, decorations for the New Year tree will be relevant, and in spring you can start building a greenhouse or greenhouse.

It is very good to involve children in this activity, it will be very interesting for them, especially if you tell them that by doing so they help nature.

Interior items for the house from plastic bottles

To build furniture, you will need many identical plastic bottles. The furniture is very durable and comfortable. And if you follow a certain technology, you can make a sofa or pouffe springy.

From tightly wound seven bottles, you get a stable base for a pouffe, which, if desired, can be sheathed very beautifully and stuffed with soft material.

To design a small table for newspapers or work at a laptop, you will need 4 racks, a chipboard sheet that will serve as a top.

Table legs can be hidden by placing a tablecloth on top. As for larger bottle projects, such as a sofa, it will require a lot of material, perseverance and patience.

Home decor from plastic bottles

If you want to decorate your home a little, and there were some plastic bottles on hand, then you can make a beautiful vase for flowers.

Remember that you can give the edges of the vase a beautiful shape by heating over a candle. So the plastic will become soft, and it can be bent with tongs.

Buildings in the backyard

From a plastic bottle, you can easily build a simple washbasin, you just need to fill the bottle with water and hang it upside down.

The lid is slightly unscrewed and the water flows down. From plastic, you can also make a bench for relaxing in your country house or an interesting gnome figurine.

From the plastic bottom of the bottle, you can easily make an interesting cosmetic bag, just sew a zipper around the edges.

Such a little thing is useful for those who love to knit. You can put a ball in this ball, and let the end out, and hang it where it is convenient. Then the ball will not constantly roll.

Photo of fakes from plastic bottles

Masters and beginners use crafts from plastic bottles for the interior, as garden decor and in the form of practical furniture. Colored plastic bottle caps are an excellent material for mosaic panels on walls and fences. The best ideas with detailed instructions and photos are easy to implement in the country, turning a bare area into a “glade of fairy tales”, and filling the house with useful little things.

One of the craziest pens in Runet, Roman Ursu, presented a crazy video in which he showed 70 ways to use plastic bottles.

Advantages of crafts from plastic containers

A well-made souvenir or trinket will eventually develop into a hobby if there are no limits to fantasy. Do not cease to amaze summer residents who have moved from simple hedges on a wire to buildings that delight in scope.

From the available material, which many people throw away, someone constructs:

greenhouse;
carport;
summer shower or bath;
country toilet or shed;
summer gazebo or sun visor;
a teremok for children or a playground;
sandbox with decorative borders;
various temporary structures on the site.

Plastic eventually becomes a real environmental disaster - it is difficult to recycle. But it is enough to involve all those who are not indifferent to the cleaning of the territory, and there will be a whole mountain of empty PET bottles for the construction of a greenhouse, a cascading flower bed or vertical gardening. The only drawback is the long collection of the same container, since the containers are produced in different colors and volumes.

To create an original decoration you need:

interesting idea;
ready-made role model (illustration);
craft material with tools;
step by step guide to the training plan.

In the hands of a real master, plastic bottles take on a second life, becoming functional objects. Souvenirs are best done on a seasonal basis. For example, New Year's toys are made in winter, practical country houses - in summer, and in spring and autumn it remains to build a "glade of fairy tales" near the house for children.

Furniture and interior items from plastic bottles

Furniture made from plastic bottles looks like a masterpiece that not everyone can afford. They will need a lot of plastic containers of the same sample. Sofas and pouffes impress with their design and comfort, not inferior to real furniture. There is nothing complicated if the sofa is made in blocks - seat, back, sidewalls. If there are not enough containers, sofa blocks can be made alternately. It is better when they collect bottles from one drink, for example, two-liter kvass or lemonade.

The principle of "assembling" furniture from bottles is simple - they are exposed in layers and tightly wrapped with tape. To make the furniture softer and springier, a little air is released from each bottle and twisted tightly. In the place where the cap is, cut out the cap from another bottle and wrap it with tape. It turns out a block, which has a bottom on both sides - this is the basis of the furniture.

Then it all depends on the imagination, the type of furniture and the number of bottles available. We wrapped 7 containers of the same volume with tape, we get the basis for an ottoman. What will be its appearance and style depends on the master. For a soft seat, you will need a round pillow or a block of foam rubber according to the size of the top. The cover is cut out according to the size of the ottoman in the form of a cylinder, and it is convenient to insert a zipper along the side seams, but it is easier to sew up the upholstery tightly.

To build a coffee table, you will need 4 racks of plastic bottles and a plywood shield as a tabletop, which can be hidden with a long tablecloth. In a similar way, they make a convenient stand for a laptop or a remote table for giving. For large furniture (sofa, chaise lounge or chair) from plastic bottles, you will need a lot of patience and source material.

Useful little things for the house from plastic bottles

Flowers and vases

It will not be difficult to decorate a schoolchild's bedroom or a children's room with crafts from plastic containers. You can build a whole bunch of artificial flowers. Put the resulting chrysanthemums, daisies or roses in a vase of the same material, adding the middle with diode bulbs on an insulated wire. This is how a night lamp of extraordinary beauty will look like, where a weak light shimmers in plastic petals.

Advice: To give the leaves a special shape, use the heating of the blanks and folding the corners with tongs!

To place a homemade bouquet, you will need a suitable vessel, just cutting off part of the bottle is not aesthetically pleasing. The edges of the cut are marked with a ruler to make a cut, fixing the result by heating the bends. A small transparent bottle is cut off to the very top, about a half is cut off from a large container. We choose a material with a corrugation or a “waist” in the middle so that there is an interesting base.

Then we do as fantasy allows, but we bend the edges beautifully. The fringed cut is obtained from vertical or diagonal notches of the plastic base. The resulting strips are evenly bent to the outside.

Note! It is important that all the notches and the depth of the slot are exactly the same, then the whole product will come out neat.

Depending on which edge is desired, the strips of the vase (the edges of any other product) are fixed in different ways:

curly bend;
stapler staples;
fusing;
bonding with transparent polymers.

Planters, flower pots and containers for seedlings

Colored plastic containers in the form of bottles and bottles of various sizes are suitable as containers for growing live plants. It is very easy to make a fragrant balcony from 3-liter tanks - a cascade of ampelous petunias. Fragrant flowers hanging from cut containers will help make the dream of a beautiful piece of paradise come true.

Large bottles and tanks cut in half are hung upside down and with a lid. At the bottom it is recommended to lay large pebbles for drainage. Excess water after watering will go to the plants in the lower rows. In the same containers, plants are grown without soil - in a hydroponic way with the addition of fertilizers. Fresh herbs and seedlings (in urban and country conditions) are also germinated in prepared plastic bottles.

Advice: Use the compact shape and the ability to hang containers for vertical gardening with automatic watering. In the absence of the owners, watering cans with water immersed in the ground will cope with moistening the plants.

Traps and feeders

Using plastic bottles, you can scare away pests or attract birds to the site. To do this, the tank is used as a feeder, and traps from bottles of chemicals are placed at the roots of fruit trees. From a double plastic container, craftsmen build traps for wasps, where they fly into sweet water and cannot get back.

Equipment of the suburban area

At the dacha "in haste" it is easy to build crafts from plastic bottles in the form of an impromptu washbasin by hanging a full bottle upside down. It is worth unscrewing the lid a little, and a small stream of water will help to wash and wash your hands. It is also worth making a bench and organizing lighting with beautiful owls or gnomes of their plastic. Any garden decor for inspiration - on interesting illustrations.

Multifunctional items for the home

Make an original cosmetic bag from 2 bottoms of plastic bottles, sewing the edges with a zipper. This box can be used as a multifunctional item - a piggy bank, a case for large beads, hairpins or jewelry.

From a similar ball, suspended somewhere nearby, it is convenient to knit, pulling the thread from the ball inserted inside. Nail polish or a lipstick collection is easier to find in a makeshift zipper box.

New Year's decor

Original all seasonal flower beds

The summer season is over, and home-made plastic flowers are replacing the living flower beds, which are not inferior in beauty to real ones. Their advantage is the ability to decorate the territory at any time. These flower gardens pale against the backdrop of living plants, but in early spring and late autumn they are the only ones that attract admiring glances.

For daisies, you will need small plastic containers of white (petals), yellow (middle) and green (leaves). You will also need an awl and a candle (for heating), “liquid nails”, scissors and hard wire in green insulation.

We cut the base of the white bottle to the center, marking 16 segments - these are the petals. We bend the neat edges over the candle flame, we also make 2-3 chamomile corollas, which we connect in the center with an awl. Here the stem with leaves is fixed on the green wire, closing with the middle. We fill the center of the flower with a yellow basket with small cuts from 2 finely dissected circles with a fringe bent over the candle. We supplement the flower with green sepals from the bottom, collect all the parts and fix them together.

From the remaining pieces of green plastic, cut out leaves with a hole at the base (for stringing) and give the desired shape by heating over a candle flame. We fasten leaves on a wire handle, they should slightly bend around it. It remains for chamomile to make a few "companions" and find a decent place for the bouquet.

All seasonal flower beds include mosaic compositions from containers filled with earth. Wall panels are made from covers. "Butterfly" or "ladybug" - in different versions.

Crafts from plastic bottles for the playground

The incredible beauty of a bird with plastic plumage is a whole “field of fairy tales”. This is a peacock or firebird, swans, doves, bullfinches and parrots. All of them are made from empty PET bottles according to the general principle:

Design an aesthetic bird head with eyes and a beak;
Build the torso and neck;
String plastic plumage;
Provide wings and tail;
Plant on paws or fix on the selected surface.

Plastic swans can be fenced off with a blue "lake" of inverted plastic bottles. Outlandish birds will decorate the trees in the corner of the garden, which is reserved for children's games. You can choose a themed decor, such as a desert island with palm trees and parrots.

The material is collected for a whole year, but it is easier to involve neighbors and acquaintances in the idea of \u200b\u200b"ecological" cleaning. In the yards there are special containers for plastic - it is much easier to collect.

Preparation for work - removal of labels and glue residues from plastic bottles, it is important to rinse well and discard the deformed material.

If vertical fences are being built, they need to be filled. Depending on the idea, sand, stone chips or dry soil are poured into PET bottles, burying 1/3 with the neck down.

For selected purposes, plastics of different elasticity are used. Heat treatment is required for filigree work (flowers). It is important not to overheat the fragments cut into strips.

Fairy tale characters sometimes require additional painting. For example, pink piglets for a playground are best covered with an aerosol spray, fixed with transparent acrylic paint.

Plastic bottles are an excellent material in capable hands. Using them as a basis, it is easy to teach children a lesson in environmental education and fill the house or yard with practical things. With a creative approach, the color, volume and shape of plastic bottles themselves will prompt new ideas for an exciting creative process.

Tags: ,

The amount of garbage that each person "produces" is growing year by year. The problem is becoming global, as flying plastic bags and plastic bottles lying everywhere have already pricked everyone's eyes. I am burning, it turns out, you can help, and even for the benefit of yourself. In any case, this applies to plastic bottles. You will be surprised how diverse and, importantly, useful crafts from plastic bottles can be made in just a matter of minutes. Well, or hours ... Depends on the scale.

The buildings

PET (polyethylene terephthalate) is a thermoplastic from which bottles are made. It will be useful to know its physical properties:

density - 1.38-1.4 g / cm³,
softening temperature (t dim.) - 245 ° C,
melting point (t pl.) - 260 ° C,
glass transition temperature (t st.) - 70 ° C,
decomposition temperature - 350 °C.

Plastic bottles are very convenient to use, but harmful to the environment, since the polyethylene from which they are made decomposes for more than 200 years. The same property makes it possible to use practically waste raw materials as a building material. Craftsmen are already building houses from plastic bottles, as well as sheds, dachas, greenhouses, greenhouses, fences. Various technologies have been worked out - the approach is quite serious.

How to build a house out of plastic bottles

The main idea is to pour bulk material into bottles, screw them with caps and use them like bricks. Fill the bottles with sand, soil. Sand is preferable, as there is too much plant debris in the soil that can rot. It must be sifted, dried, bottled, well compacted, topped up even to the very top. Get kind of bricks.

To build a house from plastic bottles, you will need a solution that fills the gaps between the "bricks". There are options here too. It can be an ordinary mortar, which is used when laying brick walls, or clay mortar can be made. To keep the “bricks” in the wall until the mortar sets, they are tied with twine from the side of the covers. Later, these "grids" will come in handy when you plaster the walls. They turn out uneven, so alignment is indispensable.

We make a greenhouse, barn, greenhouse

From plastic bottles you can build a greenhouse or greenhouse. In this case, only transparent plastic is used, since it is necessary that the light passes in sufficient quantities. For the construction of a barn, on the contrary, it makes sense to choose darker plastic - it will be less visible what is inside.

The first technology - one to one

The second requirement for bottles as a building material is an even shape. This, you know, without recesses. Otherwise, it will not work to fold the walls so that they retain heat - it will “siphon” into curly cutouts. Remove labels from bottles and dry. It is also necessary to prepare pins or rods - bottles are strung on them. Their diameter is small so that the neck passes freely. Now you can start building a greenhouse / barn from plastic bottles.

For the construction of a greenhouse or a barn, poles are dug in at the corners. Frames are assembled from timber according to the size of the walls. These frames will be the base for the bottle walls. We collect them (frames) on the ground and fasten them to dug-in poles in a ready-made form. When making the frames, don't forget the doorway and windows.

We build a frame, cut off the bottom of the bottles, string them on a pin. From such "columns" we assemble walls, a roof

The construction process begins with cutting the bottom. We string the cut bottles on the pins, directing the necks in one direction. We insert the bottles with force so that they become very tight. Having collected a row of the desired height, we attach it to the frame. You can fasten with clamps, strips cut from metal, nails ... In any way available to you. We press the second row to the first so that there is a slight deformation. We fasten in this position. So, row after row, we collect all the walls, then the roof.

Using the same technology, you can make a gazebo. But there is already no need for tightness, so you can collect figured and colored containers. So it will turn out even more interesting (an example is in the photo).

The second technology - we sew plastic

Bottles will also need to be smooth, transparent or yellow. The central part is cut out of them, getting a square-shaped piece of plastic. Pieces are sewn together in long strips. In the strip, the pieces are arranged so that they are twisted in one direction. Then the strips are sewn into canvases. To make the canvas even, the strips are arranged so that they are twisted in different directions. As a result, they equalize each other. Finished canvases are nailed to the frame. On this, the construction of the greenhouse of their plastic bottles is over.

Such a plan "sheathing" for greenhouses perfectly tolerates winters, it does not need to be removed. Due to the firmware (many small holes), there is no absolute tightness, which allows you to adjust the humidity. You won’t be able to heat such a greenhouse, but it will push autumn back to you, and it will speed up the arrival of spring.

You can sew plastic for the greenhouse manually, but it's not easy. It will be easier for those who have non-capricious sewing machines. The old Podolsk cars cope with this task. Others may have problems.

Fence and fence

There are many ways to make a fence out of plastic bottles. If you need a serious monolithic fence, you can use the bottles as bricks. The technology is the same as when building a house. To avoid plaster (after all, there is a high risk that it will collapse) - select the color of the plastic to obtain the necessary rust. But in this case, you will have to look for "building materials" of the same diameter or lay out patterns from different sizes. In general, the creative process, no matter how you look at it.

You can also make filling for the fence from plastic bottles. Make a frame, say, from wood, and come up with a beautiful filling from curly containers and their parts.

Furniture from improvised materials: recycle plastic bottles

From plastic bottles you can make not only a house and a fence, they are also used as the basis for upholstered furniture. The idea is to use plastic containers instead of wood for the frame. With tightly screwed lids, they have a high bearing capacity, and assembled in blocks, they are quite able to withstand loads of up to 100 kg or more.

Bed made of plastic bottles… you need a good mattress, and the base is not too difficult to make

Although the furniture is made differently, the general algorithm of actions is the same:

Select "building material" of the same height, tighten the covers well.
Assemble the blocks of the desired size, fastening them with tape.
Having collected the base of the required shape, sew the cover. For softness, adding furniture foam rubber.

The whole trick is that the bottles fit one to the other very tightly and do not move. The slightest play can lead to the destruction of the structure. Therefore, collect the blocks slowly, carefully fixing. You can fold the bottles in layers, securing each layer in several places. For the inner layers, it is better to use double-sided tape - the fixation will be more reliable.

Ottomans / banquettes

The easiest way is to make an ottoman or a bench out of plastic bottles. We act in the order described above. It is necessary to find bottles of the same height. It is better if they are of the same shape - it is easier to collect. From plastic containers with tightly screwed lids, we assemble the base in the form of a cylinder. It is desirable that the radius of the base be greater than the height of the bottles - so the bench will not turn over.

Next, you need to cut out two circles from fiberboard, which will be slightly larger than the resulting base radius - this is the “bottom” and the base of the seat. We fix them with tape. We take furniture foam rubber and, according to the dimensions obtained, cut out the necessary spare parts. We sew a cover from furniture fabric, a color that matches the interior.

Such a bench can be not only round. It is quite possible to make a square. And so that this furniture is not too light, it can be weighted by pouring water. But water is not a very reliable business. It is better to pour sand. Heavier and more reliable.

Sofas, chairs, armchairs

If you need furniture of greater height than one bottle, proceed as when creating walls for a house. Find "material" of the same shape and height. The first bottle is left intact, the cork is screwed tightly (you can pour sand so that it does not turn over). The bottom of the other is cut off, put one on top of the other. The bottle goes a certain distance and does not move any further, no matter how hard you try. If the resulting height is enough - great, if not - put on the next one. In this way, collect the rows of the desired height, then fasten them into blocks.

There is another way. It is more reliable in the sense that the bottles are held not by compressed air, but by a mechanical stop. And the walls in them are double, which is also important. Minus - more work, more raw materials needed. The whole process in a step by step illustration.

We take a bottle, cut it approximately in the middle of the height (the upper part with the neck is smaller).
The upper part of the neck (the lid is screwed on) is inserted all the way into the bottom.
We take a whole one, of the same size and shape, insert it upside down into the prepared structure.
We cut the third one in about half and put the lower part on top (with a lid).

From such modules we assemble blocks of the desired configuration, fastening them with adhesive tape. Don't feel sorry for the scotch. You can first fasten two bottles, then assemble large blocks from double ones.

As you understand, with this technology, there are a lot of tops from bottles (half of the third bottle). They can be used to make other crafts from plastic bottles: flowers, more practical household items.

Flower making methods

The most common plastic bottle crafts are garden figurines and flowers. Read about garden figurines There are other interesting ideas, but a lot of interesting animals and insects are collected. And we will tell about flowers from plastic bottles below - these are probably those crafts from plastic bottles that give the most pleasure. The process is simple, the possibilities are many, the result is amazing.

You have probably noticed that the bottom of a PET bottle looks like a flower. All you need to do is find a bottle of a beautiful color, cut off the bottom of it. Now you already have a pretty flower. In the middle, you can add petals cut from the central part, a core from a plastic strip cut with noodles, or glue beads inside, but a little more about everything.

Using the power of fire

To work, you will need a marker, a lighter or a candle (it is more convenient with a candle). If available, take pliers, tweezers or pliers - hold the workpiece during processing. You will also need acrylic paints, you may need glue and beads. The whole manufacturing process comes down to several steps:

There are a lot of options here. Just start doing. Right away, it may not work out perfectly, but you will understand what and how can be corrected. See a few more pictures with step-by-step photos of the process of making flowers from plastic bottles.

The simplest

For beginner needleworkers, you can try making flowers from plastic bottles of simple shapes to decorate the garden. In this case, milk containers can also be used. In order not to paint plastic, look for colored ones. It doesn't matter if they are transparent or not. They can be combined, getting flowers of different shapes.

To create such flowers, use the part near the neck. It is cut to form petals. Next - warm up a little, giving the desired bend to the petals, a little paint, a core of a melted piece with a thread (a bottle of a smaller diameter, a pharmacy will do). Here is the buttercup.

Another option is to cut from the neck into strips of equal width - 1-1.5 cm, bend them (warming up a little at the base). Make the middle whisk from the side of a milk bottle or paint the transparent plastic with acrylic paint.

The middle is any bright. Here is a piece of cork, but you can cut it into thin noodles, twist it into a roll and then heat it. Get a fluffy core.

It's all about the shape ... Despite the imperfection, they decorate the site

The topic is really inexhaustible. Flowers from plastic bottles are made in a variety of ways. From simple and uncomplicated to very realistic. It's not so much about skill, but about different tastes and desires.

Useful ideas for the home

PET containers turned out to be such a good material that a lot of useful things are made from them. In this section, we have collected useful crafts from plastic bottles that can be used on the farm.

For the kitchen and beyond

If you cut off the bottom of a bottle with a capacity of 2-3 liters, you get a bowl or a bowl, and so that its edges are even, they can be melted on a heated iron. But so that the sole does not have to be cleaned later, use a special silicone pad. If not, you can do it through a sheet of parchment for baking.

Product container. Plastic is food grade...

From the same bottle we cut off the threaded part. 1-2 cm of plastic should remain around the thread (the edges are melted using already known technology). Now it will not be difficult to hermetically close any package: we pass it through the cut off neck, wrap it outward, twist the lid.

From the bottom of the bottles attached to the bar, you get a great newspaper shelf (photo on the right). You can also store umbrellas.

From plastic cut into strips, you can weave different shapes of containers. Bottles need an even shape, with thick walls. They are cut into strips of a certain thickness. It is necessary to cut in a spiral - as a result, rather long strips are obtained. If their length is not enough, they sew perfectly.

Lampshades

You can even make a lampshade, but on one condition: you will use such crafts from plastic bottles in co lamps - only they almost do not heat up. Plastic is incompatible with other lamps. We will describe three ways to make a lampshade from a plastic bottle.

First. You need a large bottle. We draw it into strips of the same width. At the beginning and at the end of each strip, we make holes with a heated soldering iron or a nail heated on fire. We insert scissors into this hole, cut. Get even stripes.

When the strips are cut, we also make a hole in the bottom, pass a thick fishing line through the neck, bring it out through the hole in the bottom, and fasten the decor on the reverse side. You can - a button, you can - a pebble of a suitable color. Now, pulling the fishing line, we get an interesting shape of a lampshade. You can put a light bulb in it.

Another lampshade was made using a similar technology. But then they cut a part of the bottle with a neck into strips, wrapped the strips and fixed them on the neck. To give the desired shape, the place of the fold can be warmed up a little over the flame of a candle or lighter. The resulting "flowers" are attached to the base. Here we get an unusual design.

They also make lampshades from bottoms. You need to find a sufficient number of identical bottles, cut off their bottom, glue them together using universal glue (choose transparent). The main thing is that it glues plastic and quickly hardens.

flower vases

Making a vase from a plastic bottle - what could be easier ... Just cut off the neck and you're done. But there is a technique that allows you to get patterned walls. You will need a soldering iron with the thinnest tip. Its power should not be too high. Then everything is simple: with the help of a heated sting, you burn out the patterns.

Magically! To make the picture appear brighter, we take acrylic paint and paint the resulting beauty. The paint can be in an ordinary can, but it is faster and more convenient to work with a spray can.

Here are the options...

Photo Ideas

Crafts from plastic bottles are such a vast topic that it is impossible to talk about everything. What is nice, knowing a few tricks, you can easily find out how and what to do by looking only at the photos. So here we put together a few ideas that we found interesting.