How easy it is to make a wardrobe with your own hands, in which outerwear will be stored correctly. We make a wooden cabinet with our own hands How to make a hatcher with our own hands

Are there many things and pieces of furniture in your house that you can easily refuse? Surely enough. However, they do not include such a piece of furniture as a wardrobe.

After all, it is in it that you store most of your clothes, towels and bedding. And so it is almost impossible to do without it.

Of course, it is possible to replace it with cabinets and chests of drawers. But their number will be so great that the space of the room will be completely cluttered. Not everyone can afford this.

Many people live in fairly small apartments, in which every centimeter of free space should be rationally used, so do not forget that you can order modern wardrobes with delivery and assembly from our partners.

But often the cost of such important products is unreasonably high. And so some people are forced to refuse to buy cabinets.

But experts are sure that a way out of this situation can be found. For example, to make this product yourself.

If you are wondering how to make a wardrobe with your own hands, then we recommend that you read this article. In it, we will take a closer look at the simplest assembly example, which even a novice carpenter with no experience can handle.

Closet detail

For the manufacture of the cabinet, we will use a material such as chipboard. The thickness of one of its boards is 18 mm. In addition to the base material, a self-adhesive melamine edge with a thickness of about 0.5 mm will also be used. The product will be equipped with a standard sliding system for facades.

You can buy an edge in a furniture store. It is worth noting that to design a built-in wardrobe with your own hands, you may need a special sliding mechanism.

Most often, it is not easy to find a similar one in a regular store. Then you will need to order it. However, even in this case, the facade system will cost you much less than if you purchased a finished product.

The cabinet, which will be considered as an example, has a height of 2288 mm, and its width is 1166 mm.

Necessary tools and materials

Before proceeding with the manufacture of the cabinet, you should make sure that you have all the necessary materials and tools at hand. You can find out the number of boards and parts if you carefully consider the drawing of the cabinet, which is presented to your attention below.

The standard set of tools required for carpentry to create a cabinet includes: a drill, a level, a puncher, a measuring tape, a hammer, glue, a hacksaw and connecting elements.

Self-tapping screws and dowels act as connecting elements. We draw your attention to the fact that a hacksaw should be selected one that is suitable for both wood and metal.

The bars that will be used under the coat hanger must be sawn off from a single structure. Their diameter should not exceed 22 mm for the declared dimensions of the product.

If you are not sure that you can make them correctly on your own, then the best option would be to buy. You can buy them in a store that specializes in selling furniture fittings.

You can also buy pens in the store. When buying them, pay attention to the design. It should correspond not only to the manufactured product, but also to the overall interior design.

Note!

Manufacturing steps

At the first stage, you need to prepare all the details. Pay attention to the photo of the cabinet, made by hand, which is presented below. To create it, a circular saw was used, since it made it possible to cut the boards most accurately and accurately.

At the second stage, you should do the preparation of the edges. To stick them, you need to use a regular iron and follow the instructions.

At the third stage, grinding is performed. With its help, you will get rid of the roughness existing after cutting. To do this, you can use the usual sandpaper with fine grains.

At the fourth stage, you should start collecting boxes. An assembly example is shown in the figure.

At the fifth stage, the entire structure is assembled.

Note!

It is worth noting that the assembly of the cabinet itself is no different from the assembly of drawers. After all, the cabinet itself differs from the drawers only in its size.

In order to perform a screed on confirmations, you will need to use a hex bit. If you don’t have one at hand, you can use an ordinary manual key. However, it will take you more time to work.

Fastening the guides under the doors should be done using self-tapping screws, which have a size of 4 by 16 mm. In place, the distance between the front edge of the bottom and the sidewalls of the product should also be measured.

Be sure to make sure that the product is equipped with a high-quality system that will eliminate the possibility of cracks. This is extremely important if you plan to make a corner cabinet with your own hands, since any gaps will be noticeable.

DIY cabinet photo

Note!

The question of how to make a wardrobe with your own hands sooner or later arises for every person who wants to save on new furniture. Not everyone has the opportunity to purchase a wardrobe in a store, because such a purchase can be very expensive. There is another obstacle - to choose an item for a summer residence, at home, which can be especially problematic due to the lack of the desired model. Therefore, self-production is a great alternative to expensive store furniture and additional savings for the family budget.

What do you need?

Many people think that making furniture is an incredibly difficult and overwhelming task, and before you get started, you should at least read the book "How to make a wardrobe with your own hands." But it's not. In fact, the production of a comfortable, roomy and beautiful piece of furniture can be divided into the appropriate stages: preparation of the necessary tools and materials, production of individual parts, assembly, installation.

First of all, you need to decide what the cabinet is for and where it will stand. After all, the furniture will serve for many years, so the issue must be taken seriously. Often cabinets are arranged along the entire length of a blank wall, in the opening of an interior partition. As for cabinet furniture, it can be used to divide a one-room apartment into zones, this view will look good in Khrushchev.

Next, you need to calculate the dimensions of the cabinet. It should mean not only the width and height, but also the distance between the shelves, their number. For clarity, you need to transfer your idea to A4 sheet. It will also help determine the material for the product: wood, lining, MDF, fiberboard. Often the frame is made of wooden beams and the doors are ordered separately. Do-it-yourself production is a good alternative for a home, a summer residence. The design of the cabinet can be adapted for small apartments, it will look good in Khrushchev.

It is important to decide on the color of the product. There are many colors: "Beech", "Oak", "Alder", "Walnut". You can also always order the desired chipboard by choosing a color from the catalog.

Cabinet drawing

Depending on where the cabinet will be located - in the house, in the country, Khrushchev, it is necessary to draw up the appropriate drawings, break the product into its component parts of which it consists. If there was a good mark in drawing school, you can do everything yourself on a piece of paper. Also, drawings are created in special computer programs that can be found on the Internet.

Before you start drawing, it is important to consider the external dimensions of the cabinet, the dimensions of the room. You should pay attention to the plinth, baguettes, switch, window sills, heating and take into account the distance from them.

Plinth in the room. If the cabinet is designed from wall to wall, then the plinth will not allow furniture to be pushed tightly. In this case, you need to bevel the vertical edges of the cabinet, or dismantle the plinth itself.
Chipboard thickness. The thickness of the material is calculated taking into account what will be stored in the cabinet, its dimensions. If there are no long shelves for books - from 16 mm. When drawing, you can count on this thickness. For cabinet furniture, you need to choose high-quality material, more expensive.

When creating drawings, diagrams of a cabinet for the ceiling, we must not forget that it is assembled in a supine position, and then it will need to be lifted and placed. Then its diagonal should be 3-5 cm shorter than the height of the ceiling. Otherwise, lifting the cabinet may hit the ceiling.

Manufacturing

After the drawings are ready, you can start manufacturing the necessary parts. Sawing boards is a rather difficult task, and it is better not to test yourself, but to order this work from professionals. As a rule, such a service is provided at the place of purchase of chipboard sheets. The difficulty lies in the fact that a machine for sawing chipboard is quite expensive, and it makes no sense to purchase it for one cabinet. Many people prefer to saw on their own with a jigsaw, but this results in chips, so it's better not to risk it.

It is necessary to decide in advance on the door opening system: to the sides, up, down, move as in a compartment. Taking into account the number of shelves, drawers, doors, it is possible to calculate the required number of euro screws, rivets for them, guides for drawers, holders.

Separately, it must be said about the drills. They should be only on wood, which will allow you to make an exact hole yourself without the use of additional forces. Their characteristic difference is the presence of a blade in the center and a flat profile (and not a cone, as in other types). Before assembling, it is important to practice drilling on unnecessary scraps that will remain after sawing chipboard.

To avoid errors in measurements, you need to use high-precision instruments. Roulettes should be avoided, and preference should be given to a metal meter and half-meter ruler, which can be purchased at every stationery store. But beware of Chinese-made plastic counterparts, they often have errors that can be a serious drawback when assembling a product.

Felt pads will help facilitate further movement of the cabinet. They should be glued to the places where the object stands.

Making a closet

Let's consider how to make a wardrobe yourself, using the example of furniture with hinged doors. It is believed that this type of assembly is quite simple compared to a coupe, because there is no need to assemble the doors and frame separately. The design has many variations, which gives room for imagination and allows you to choose the model that will meet all requirements. The wardrobe can be filled with shelves, drawers, a bar for hangers. Such a model will be convenient both at home and in the country.

The dimensions of the swing wardrobe are also individual, which allows you to fit it into any layout of the apartment, including Khrushchev. Consider the drawings, diagrams using the following dimensions as an example: 2200x600x1500 mm.

Details of a piece of furniture:

Sheets for sidewalls: 2184x575 - 2 pcs.
Bottom: 1468x575 - 1 pc.
Lid: 1500x600 - 1 pc.
Shelves: 976x575 - 2 pcs.
Shelves: 476x575 - 5 pcs.
Wall: 268x500 - 2 pcs.
Facades: 2081x497 - 3 pcs.
Drawer side: 100x1468 - 1 pc.
Drawer guides: 100x500 - 4 pcs.
Int. boxes - 100x386 - 4 pcs.
Bottom for boxes: 497x415 - 2 pcs. Fiberboard.
Partition: 2068x575 - 1 pc.
Wall: 2081x1497 - 1 pc. Fiberboard.
Planks: 976x50 - 1 pc., 476x50 - 1.

In order to make a cabinet yourself, you will need: chipboard, fiberboard, edge, confirmations, screws, handles, legs, guides, rod.

The cabinet has large dimensions, so the load on the bottom increases. It is recommended to attach kitchen legs to the bottom, which have a number of significant advantages:

Good price.
Possibility of regulation. This point is of great importance, since not all houses have ideal floors. It is especially important when installing furniture in the country, in Khrushchev. Thanks to the legs, you can always adjust the desired height and level the cabinet.
Load distribution.

When installing drawers, it is desirable to install mortise handles. If it is planned to put ordinary ones, then the drawers must be moved inside the furniture, otherwise they will interfere with the facade, the cabinet will have open doors. Therefore, in order not to have to redo the finished product, you should take care of choosing accessories in advance.

Wooden furniture

A homemade wardrobe made of solid wood is an expensive pleasure and a luxury item in the house. When choosing a material, the following rules should be followed:

The wood must not have knots.
There should be no layers in the mass of the tree.
Annual rings should be close to each other.

In order to make furniture out of wood, 2 types of shields are made from it:

Whole - from one piece of wood.
Glued - this is when thin shields are glued to each other, and then pressed. It is believed that the second type of array is stronger. It does not change its shape, even when subjected to stress.

Types of wood:

Hard: maple, oak, elm, beech, rowan, walnut, ash, apple, elm and sycamore. They make product frames from it, serious structures that will be subject to loads.
Soft: pine, cherry, willow, alder, cedar, spruce, juniper, poplar, aspen, chestnut and fir. Suitable for decorative elements, facades.

Most cabinets are made from solid oak. It has several advantages:

Easy to handle.
Insects don't like it.
Doesn't rot.
Durable.
Does not react to humidity.

Another suitable material is beech. In terms of strength, it is not inferior to oak, so you can safely make furniture from it. But beech has a drawback - it easily absorbs moisture, which is not a good sign. But if the closet will be in the bedroom or another room with a favorable climate, you can safely choose the array as the material for the future product.

The manufacture of a cabinet from solid wood is carried out in the same way as from other materials, which allows the use of similar drawings. But it is not recommended to equip the whole house with them. The material is expensive and very capricious. It should be remembered that solid wood products do not like changes in temperature and humidity. Otherwise they swell up. Taking into account that many houses, apartments, cottages are equipped with a floor heating system, air conditioners, it will not be easy to create comfortable conditions for furniture.

At the same time, the array makes the dwelling truly royal, chic. Therefore, before use, it is important to treat the tree with special compounds in order to reduce its susceptibility to the environment.

Making a wardrobe for yourself is not such a laborious process as it might seem at first glance. By clearly following the instructions and advice, you can independently assemble any cabinet or built-in piece of furniture.

Self-manufacturing a cabinet will help not only save money, but also get a piece of furniture that will match the interior of the room and personal preferences.

Chipboard - common and inexpensive. In addition, it allows you to adjust to any color scheme, so the experience of working with it will come in handy more than once.

So let's get started!

Schemes and drawings

The first task is to decide where the cabinet will stand. Take into account the width, height, depth of the product, the location of the shelves and other design features. It is necessary to think over the purpose of the piece of furniture.

Reference. Each product has its own characteristic features. For example, wardrobes made of chipboard for clothes are equipped with sections for storing wardrobe items, drawers.

There are various types of cabinets:

swing;
sliding;
coupe.

For small spaces, the last two options are ideal. A free-standing cabinet cabinet is suitable for different rooms. It can be disassembled and carried anywhere. Built-in wardrobes have a significant disadvantage: attachment to one place.

Before drawing up the drawing, the design is planned, the dimensions of the product are calculated based on the parameters of the room. The drawing is made according to pre-planned plans and schemes. You can use special computer programs.

The layout shows:

parameters, number and location of shelves;
dimensions of sliding elements;
the depth and height of the shelves, the order of their placement;
cabinet bottom dimensions.

Attention! All data must be clear. The final result depends on how accurately the drawing of the product is made. The sawing of materials is carried out by transferring the drawing to the chipboard.

Materials and accessories

When choosing chipboard, it is advisable to pay attention not only to the marking, but also to the manufacturer. Raw materials of German and Austrian manufacturers are considered to be of high quality. There are two types of chipboard on sale: E1 and E2. The first option is the most eco-friendly. Chipboards come with laminated or non-sanded surfaces.

Before sawing, you need to purchase accessories. It should be in the same style with the future product.

To perform work on the manufacture of a cabinet from chipboard, you will need:

wood screws;
plastic plugs to match the color of the material;
guides;
handles, hooks and other accessories.

To hide the roughness on the exposed elements of the product, you will need end furniture decorative tape.

Instruments

Before installation, it is necessary to check once again the correctness of the drawings and the availability of materials. To make a cabinet from chipboard at home, you need a whole set tools:

circular saw or electric jigsaw;
wood drill and drill;
screwdriver;
Phillips and flat screwdriver;
roulette;
screws and dowels;
a hammer;
level;
perforator;
Ruler and pencil;
hacksaw for wood and metal.

Before assembling the product, sawing of chipboards is performed: parts are cut out according to the designed drawings. The blanks are laid out so that the longitudinal cuts are along the entire length.

Attention! If it is not possible to cut chipboard sheets on your own due to lack of skills or the necessary tools, it is better to contact a carpentry workshop.

On the ends of the prepared parts, the edge is glued with an iron. It is included on ¾ of maximum power, applied to the tape and run over it several times. To make the edge pressed tighter, iron it with a dry cloth.

How to do?

Work begins with the assembly of the frame of the product. Assemble the frame under the bottom. Legs are not required for wardrobes.. In other cases, plastic devices are used for adjustment. Assembly is carried out in a certain order:

Using a drill, prepare holes for the docking joints, observing their accuracy and symmetry. Holes are also taken into account for shelves, partitions, hangers.
Connect the bottom, sides and top of the product using screws and a screwdriver. First, lay the bottom of the cabinet and, in turn, attach the side walls. The upper partition is laid on the U-shaped structure.
The installation of supports for shelves, hooks, furniture drawers and other elements is carried out at the base of the cabinet. To check the correct installation, use the level. Opposite fasteners must be horizontal.

At the final stage, the door mechanism is fixed. For cabinets of sliding models, guides are fixed from below and from above. For swing systems, door hinges are screwed on the sides. Upon completion of the work, the installation of accessories is carried out: hooks, crossbars, handles.

decoration

Before implementing a plan for decorative finishing, you need to clearly decide on the style of a new piece of furniture, determine the way it is clad. There are several methods for decorating cabinets made of chipboard. Consider painting and pasting with a film.

paint

The most reliable and capital method of finishing is painting. It's very easy to do and inexpensive. Chipboards are treated with acrylic, alkyd, spray or ordinary wood paint.

Reference. Acrylic spray paint lays down on a surface better, than usual. The treated surfaces are evenly painted and smooth.

Chipboard staining is carried out in stages:

Level and dust the work surface.
Degrease and apply a primer.
Existing chips are filled with putty and overwritten.
Apply one or two more coats of primer.
Paint the surfaces with the selected paint.

You can decorate the cabinet under the stencil with fancy multi-colored or plain patterns, symbols.

Paste over with a film

Self-adhesive film will give the cabinet originality and the desired style. The film should harmoniously fit into the interior design. But such a coating will not last long.

To complete the work you will need:

primer;
solvent;
soft fabric;
knife and scissors;
roller;
sanding paper.

Chipboard pasting with a film is carried out according to a given algorithm:

Taking measurements.
Cutting the material in the required quantity to decorate the surface.
Removing the protective layer from the film.
Pasting the furniture panel with a prepared cut.

Important! In the process of using a self-adhesive film, the surfaces of the product are treated with a primer to improve the adhesion of both planes.

To avoid wrinkles, the plane is smoothed roller. Start from the edge on which the material is applied.

For processing large areas, you can use a different method of pasting with a film. The basis is a solution of water and soap. Remove the protective layer from the material and place it on the floor. sprayer a soap solution is applied to the adhesive layer of the film and applied to the surface. If desired, you can do gluing with a film together with painting.

Upon completion of the work, the final design of the cabinet is carried out - mirrors are installed, lighting and other functional elements are equipped.

Useful video

Conclusion

Thus, a cabinet made of chipboard, made and decorated with your own hands, will become a unique element in interior design. With the right approach, the product will be durable and stable. And the cost will be much lower than the prices for similar models of chipboard cabinets in stores.

In contact with

A closet is an essential part of any living space. It differs from other pieces of furniture in its functionality, convenience and small size, for which it has a major role in everyday life. If you count how many times a day you use it, it is very difficult to imagine life without this item.

Unfortunately, in the modern world, not everyone can buy a finished product, because the prices are simply sky-high. But there is always a way out! I propose to consider the option of assembling it yourself. Before we move on, see the photo of the cabinet, it was assembled on our own, while saving three times.

To assemble furniture, you don’t need a special mind, the main thing is to be able to draw a little, be friends with tools, love to do something with your own hands. And in order to help a little in this matter, consider what cabinet you can make yourself.

Types of cabinets

For dresses. This view consists of side parts, bottom, top, front. Inside it is equipped in such a way that things hang on hangers, it does not have shelves, or their number is reduced to a minimum. The door opens "open".

Closet. Improvement of the previous type. The main difference is a sliding door system, it can be built-in (without side parts or without a bottom).

Built-in cabinets. The type is very similar to the dressing room, in a reduced size. This view can be placed directly in a niche or partition.

All types are very different from each other, so you should very carefully calculate for what purposes you need it. Ideas and options for do-it-yourself cabinets, selected just for you, are further presented in our article.

Bedroom option. This type is not the main one, it has a set of clothes for tomorrow, it contains a minimum number of shelves for towels, shoes, trousers.

Multi-panel cabinets. They have several departments with rods, there are many shelves, drawers. The depth has a mark of no more than 60 centimeters, the width is 10 centimeters less than the depth.

View with end bars. This refers to a built-in hanger in a structure not exceeding a depth of 400 millimeters.

It will not be right if I do not notice that the cabinet is also divided into different shapes - angular or even structures. Now, having sorted out a little with the types of structures, we proceed to the next stage - the choice of material for the manufacture of the cabinet.

In the modern world, there are a lot of options, for every taste and color. Basically, for this type of furniture, an array, chipboard, MDF is used. For finishing wood, you can use laminated, laminated methods.

Terminology

Laminated is a thing that is lined with a film based on paper.
Laminated - pasted over with a paper resin film, followed by varnishing.
The composition of chipboard includes - resin, paraffin, ceresin, sawdust, woodworking waste.
The composition of MDF includes - wood fibers that hold the ingredients together. The production process consists of a hot press.

Instructions on how to make a wardrobe with your own hands

In today's article, we will analyze in detail an example with the manufacture of a sliding wardrobe. Before starting work, you need to draw up a draft of the future product.

With the help of small drawing skills, we draw a sketch on paper, and if you are a confident user of computer programs, use special programs like Avtokad. You need to enter drawings and measurements for the manufacture of cabinets into the program, then follow the instructions.

Very important! While working on the drawing, do not forget to take into account the plinth (it can reduce 4-7 centimeters of the cabinet), you cannot move it tightly against the wall, it will remain hanging around. It would be better if it were removed altogether.

So, the promised action plan:

Drawing. This stage was dealt with a little higher.
Sheet cutting.
We drill places for the base (2 strips and an average partition).
We fix all the components of the plank according to the plan.
Important is the moment of installation of a sliding door system.

Assembly is recommended to be done in a lying position, so consider this point when choosing a height. For the convenience of moving to a "permanent place of residence", put on felt inserts, so it will be easier to push, and the floor will not harm. The finishing touches are fittings (handles, wheels for pulling out doors, hangers).

Thus, we make a wardrobe with our own hands at home, while saving 50% of the finished product sold in stores. This is an amateur business, if there is no money, you need to have time, and if there is no time, then you need money.

DIY cabinet photo

Updating your wardrobe every season, you suddenly notice that there is simply nowhere to put new things. Throwing away clothes of good quality, but bought last season, does not raise a hand. You can solve the problem by assembling a wardrobe with your own hands.

Comfortable and roomy designs will collect the things of all family members, while taking up very little space in the room. Basically, this is a place that is little used and not very convenient for placing other pieces of furniture.

Design Options

If you want to install a sliding wardrobe in an apartment or house, you need to make accurate measurements of the intended installation location of the furniture element and place an order with a company that manufactures cabinets. The second option would be to measure the installation site, independently design the structure, order the sawing of parts and install the wardrobe.

You have a choice - built-in structures, corner cabinets and models of separate walk-through structures. Once you've made your choice, you can start building your own.

Types of wardrobes differ in design. If you have never assembled furniture, it is better to start with a walk-through model. This universal model can be installed in almost any room.

In many apartment projects, the entrance hall was made small in size in the shape of a rectangle. If you put an ordinary wardrobe with a swing door, there is absolutely no space left. A wardrobe with a sliding door has become a real salvation. Its height mainly goes up to the ceiling, which gives maximum use of the area. Mirrored door panels visually enlarge the space.

materials

Even the most fastidious buyer will be able to find on the market the color and shade of laminated chipboard he needs, most often used for self-assembly of the wardrobe. Hardboard is used for the back wall. The choice of fittings in stores has practically no boundaries - from the simplest to exquisite bizarre shapes. The door leaf can be made to order from any material.

For cabinets, 16 mm thick laminated chipboard sheets are used. Sheets are sold on the market with a height of 2450 or 2750 mm and a width of 1830 mm. If you want to save money by reducing material waste, consider these dimensions when designing your closet.

Let's take a closer look at the option of assembling a wardrobe with a height of 2450 mm, a width of 2400 and a depth of 650 mm.

In addition to chipboard sheets, we need a melamine self-adhesive edge. To assemble the cabinet of the design shown in the picture, we need the following details:

Two sidewalls measuring 2433x650 mm.
The bottom is 2367x650 mm in size.
Cover of a case in the size in 2400х650 mm.
Large shelf - 2367x550 mm.
Seven small shelves - 778x550 mm.
Two partitions - 1917x550 mm.
Rear and front plinths - 2367x100 mm.
Side parts of the plinth box in the amount of 3 pcs. and 550x100 mm in size.
Two ribs of the basement box measuring 1159x100 mm.

Hardboard back wall details:

Wide detail for two compartments - 1940x1595 mm.
Narrow detail for one compartment - 1940x800 mm.
Detail for the top of the cabinet - 2395x410 mm.

Sawing parts of the future wardrobe is better to order in the cutting service, which is a must-have at any building supermarket. Show the experts your cabinet design and exact measurements. In our case, there is already detailing and it is better for sawing masters to show it.

It is possible to make a wardrobe door system on your own, but is it necessary? If you are planning to assemble not one, but several cabinets, this can be beneficial. Doors for one cabinet will cost you much more than ordering sliding doors from a company that manufactures, supplies and assembles sliding fronts.

You need to visit the company's office and place an order, indicating the exact dimensions of the clean opening and the number of canvases. For our cabinet, the net front dimension is 2317mm high and 2367mm wide. We need to make two sashes of the same color as the acquired laminated chipboard and one mirrored sash. There must be a seal, stoppers, guides. In general, the whole set necessary for the quality work of the sliding facade system.

Everything that concerns the facade has already been ordered, but for the interior design of the cabinet, you need to purchase furniture fittings. For our project you need to buy:

For fixing hardboard screws or nails.
In the middle compartment of the cabinet for adjusting the shelves in height, you need undershelf supports.
Confirmations of sizes 70x5 mm.
Rod holders.
Self-tapping screws 16x4 mm in size.
Two bars for hangers measuring 775 mm.

When the finished parts are delivered, you can begin to prepare them for assembly. You will need an iron to work. Carefully attach the acquired edge to the end of the part so that the beautiful side is on top. Carefully walk on it with a heated iron. Make sure your iron is not set to steam.

Press the heated edge well and wipe thoroughly. Carefully sand the cut edges with sandpaper. When preparing the details do not need to rush. Try to achieve the highest quality of work so that your closet looks neat and beautiful.

From the details of the plinth, assemble the base of the podium for the bottom of the cabinet. The plinth must be mandatory.

Assembly

To assemble the cabinet you will need:

Pencil and rectangle.
Drill and drills 5 and 8 mm.
Roulette.

Instruction:

To assemble parts into one whole structure, purchased confirmations are used. First, we look at our project and mark up the attachment points.
When markings are made on all the details, we proceed to the drilling process. For holes in the plane, we use a drill with a diameter of 8 mm. The hole must be through. The depth of the hole at the ends is not more than 60 mm, and the diameter is 5 mm. We make holes at several levels in the places of installation of the shelf supports. When the cabinet is ready, you can safely move your shelves to the desired level.
To assemble the structure, you will need the help of one person. The work will go faster and the build quality will be better. We connect all the details of the cabinet and install it in place. We expose the cabinet evenly, using a level.
Now you can proceed to the installation of the facade. We fasten the upper guides along the edge of the cabinet lid. We retreat from the edge of the bottom of the cabinet a maximum of 10 mm and fix the lower guides. Before tightening the screws, we insert the stoppers into the roller track.
Now you can put the facade back in place together. One person leads the upper part of the facade into the guide, and the other sets the wheels in the desired track. A hex wrench is used to adjust the front. Adjusting screws are located at the bottom of the front end. By raising or lowering the lower roller, we set the facade to the desired position.

When the closet is loaded with things, the adjustment will need to be repeated. Here is the finished work on the installation of the wardrobe. Now you can proudly consider yourself a master and try to assemble a more complex structure. There is already experience, which means that the assembly will be much faster and better.