Clothes hangers are a mandatory attribute in every home, since otherwise it is rather problematic to arrange outerwear. In addition, floor hangers are also useful in the bedroom, so as not to put clothes in the closet every evening and not to use chairs or armchairs. But in the store, beautiful furniture is quite expensive, so the best solution is a do-it-yourself outdoor clothes hanger. Indeed, from inexpensive materials, you can make original and beautiful hangers that will greatly decorate and make your interior comfortable.
You can make a clothes hanger from almost any material. But if you are going to do it yourself, the choice of material should be approached carefully.
Wood and plywood are best suited for work, these are the most practical and plastic materials that are easy to work with. If products from them are used in the house, then they are guaranteed not to be exposed to moisture and their service life will increase significantly.
Working with metal or plastic at home is quite difficult, so you should not choose these materials. It is worth considering the fact that sometimes there is a significant load on the hanger, so you need to use materials of appropriate strength so that the furniture does not break.
Examples of floor hangers using metal water pipes
When you buy wood or plywood, pay attention to their quality, because this is a guarantee that the hanger will look beautiful. In most cases, wooden products are only stained or varnished, so the texture remains visible on the surface.
Floor hanger in the form of a tree
Making a floor hanger is easy, and it does not require a lot of tools and materials. This hanger is made from two sheets of plywood, approximately 70x170 cm in size and 18 mm thick. For manufacturing, you only need glue, a jigsaw and sandpaper. The work itself will also not take much time and you will not find such hangers in any furniture store.
First you need to draw on one of the sheets of plywood the outline of the future product. This can be done simply by transferring the drawing to scale on plywood. The most important thing is that the legs are of sufficient width - about 60 centimeters. This is necessary for stability, since if you make them narrow, then the hanger will fall if you hang heavy winter clothes on it.
You need to store clothes so that they do not lose their attractiveness, and finding the right outfit is always easy. But what will it be - a few nails driven into the wall, or a stylish and elegant floor hanger? A floor clothes hanger can become not only a functional item, but also a significant element of the interior, adding a touch of a certain style and charm to it.
Pros and cons of floor hangers
The main disadvantage of floor construction is its dubious stability, especially for inexpensive products. But if you think in advance what kind of things the future hanger will be used for, you can choose a high-quality, fairly stable and safe model.
Advantages of floor hangers:
- Mobility. This part is easy to move to another place. If you have rearranged, repaired, added a new interior element to the room, or vice versa - freed up space from unnecessary things, now the hanger will look more harmonious in another place.
- No installation work. When installing a wall hanger, holes in the wall are often required, which damage the decorative coating. When dismantling, the holes will be visible, and the wall fragment will have to be repaired. When you no longer need the floor clothes holder, simply hide it in your utility room in a matter of minutes.
- Wide model range. You can choose a floor hanger for any style of interior, for any type of clothing, accessories and even shoes. They differ in size, material of manufacture, external design.
Hanger for clothes floor wooden
A wooden hanger is the most popular option. The tree is strong and durable, therefore, such a hanger will be stable and reliable. On sale there are lacquered and painted products, carved models, as well as the most concise ones, which, by the way, you can do yourself. A wooden clothes stand will be appropriate in many styles - from traditional classics to fashionable ones. loft. Such a hanger will decorate a country-style room, as well as a room in a modern eco-style.
Clothes hanger outdoor metal
Such a hanger has an impressive weight, so there is no doubt about its stability. Most often, metal hangers are made of chrome-plated aluminum, which can be painted in a variety of colors. Separately, it is worth mentioning forged floor hangers. These are products that are not inferior in practical qualities to conventional metal ones, but have enhanced aesthetic properties. Wrought iron hanger is a unique and elegant decoration of your hallway or verandas.
Clothes hanger floor IKEA
Holders in a variety of materials can be found at IKEA. An IKEA hanger can also be a combination of materials. For example, plastic hangers are unstable due to their low weight, so manufacturers use a hybrid of plastic and metal. Also, metal and wooden hangers are equipped with rubber or plastic tips of hooks (so as not to spoil clothes) and legs (to protect the flooring).
One of the convenient ways to store clothes is a floor hanger. You can put it at the entrance and leave outerwear here. Other models are more suitable for bedrooms, dressing rooms, children's rooms.
Types of floor hangers and their location
Some types of floor hangers are placed in certain rooms. For example, hangers for outerwear are placed in the hallway near the door. This is convenient: you can immediately get rid of clothes. The floor hanger-rack for hangers is more versatile. Such products can be placed in the corridor, in the dressing room, even in the nursery or bedroom. They accommodate a large number of clothes and they can replace a wardrobe.
Standing hangers for suits, shirts and trousers are most often “registered” in bedrooms or nurseries (if the child is a schoolboy). This is where we usually dress before leaving the house. Hangers and chairs are also placed there. This is, in fact, one of the options for suit hangers. Just the legs and stops took the shape of the seat.
What materials are they made from
Floor hangers are most often made of metal or wood. Both of these materials are strong, ductile, durable and relatively inexpensive. Some parts - plugs, parts of hooks - can be made of plastic.
Most often you can see floor hangers made of metal and wood.
Plastic inserts are more common on lower cost metal hangers. If not elements of the supporting structure are made of plastic, this is not bad and you can buy such floor hangers without hesitation. If the elements of the supporting structure are made of plastic, it is better to look for another model.
Metal hangers
The largest selection of floor hangers made of metal. They are usually made from thin-walled round or square tubes. The metal used is most often black, covered with a protective coating. It can be paint (most often - powder coating), nickel plating, chrome plating. In recent years, a new protective coating has appeared - a plastic film (PVA). This is also a good option, since the film is impervious to moisture and air. It is easy to care for such products, as the surface is smooth, without pores.
If the floor hanger will serve to accommodate heavy winter clothes, pay attention to the thickness of the metal when choosing. The minimum in this case is 1 mm. If the pipe wall thickness is not indicated in the product description, the wall is most likely very thin and suitable for light clothing. Indirect signs that will confirm your guesses are the weight of the product and the price.
Wooden
Wooden hangers can be carved from solid wood, or can be prefabricated. The first option is much more expensive. Teams are 2-3 times cheaper, but they do not differ too much in appearance. The presence of joints in products of normal quality is hardly noticeable, so with a limited budget it is quite possible to purchase economy class products.
Wooden floor hangers are well polished, coated with a protective coating. Usually varnish or oil is used. The varnish creates a protective film on the surface, so it is easy to care for such products. Oils for wood do not create a protective film, but protect no worse. When processed with oil, the structure of the wood is clearly visible - all the fibers, the pattern.
Standing clothes hangers in the hallway
Floor hangers for outerwear in the hallway most often represent a rod, on which hooks for clothes of different lengths and shapes are planted around at different heights. For stability, the design is equipped with a round (rarely square) weighted base. They can be made from wood or metal.
The height of the floor rack is 150 cm and above, and the base is a circle with a diameter of 35-45 cm. In order for the hanger to be stable, you need to pay attention to the fact that the lower part is weighted. And anyway, such designs require careful attention: you need to hang clothes evenly. Otherwise, the hanger may fall.
There are floor hangers for outerwear of this type, but made differently. Several pipes or metal strips are bent with a certain radius. In this case, the upper part is smaller than the lower one. This design is more stable, but requires more space, which is not always possible in a small hallway.
Clothes hanger racks
A hanger rack for clothes on a coat hanger is a handy thing if there is not enough space in the closets. They consist of a rectangular base, one or two cross-tubes, on which hangers with clothes are hung.
Hangers-racks are made of metal and wood. There are metal pipes, there are forged ones. Some models of metal racks for clothes have adjustable height. For long clothes, their rack can be raised higher. The maximum height is 150 cm. For short clothes, you can put it at a height of 80-90 cm. This is the minimum height, but there are also intermediate positions.
In some cases, a floor hanger on wheels is useful. It is easy to move from place to place without removing hung clothes. There are children's models of floor hangers of this type. They differ only in height and more "cheerful" colors. Even children's floor hangers can be made of plastic. Children's clothing does not weigh that much, so the strength of the plastic is more than enough. And for the price, plastic floor hangers are the most inexpensive.
Folding models - an outlet in case of receiving guests
For those who receive guests in large numbers, it can be problematic to place their outerwear. For such cases, there is a folding rack for coat hangers for outerwear. When folded, it takes up very little space and can be stored in a pantry.
Floor suit hanger
The problem of storing a business suit is easily solved with the purchase of a special floor hanger. It is somewhat similar to racks, only with special hangers for a jacket and a crossbar for trousers.
There are stands for a suit made of wood, metal and plastic. Plastic in this case is not bad: a large load is not expected, so the strength of modern plastics is more than enough.
If we talk about useful options, this is a shelf or a box. It is convenient to store business trifles in it: glasses, cufflinks, wallet, car keys, etc.
They put floor hangers for a suit, usually in the bedroom, in the dressing room. It may be convenient to have such a device in the office. There are different models, you can choose for any style of interior. And some options look like a designer decoration themselves.
Hanger-chair and hanger-bedside table
There are quite unusual models of hangers. They are combined with pieces of furniture. For example, there is a chair hanger. The models are different: with a hanger for a suit, just a bar for hangers or with a rack for outerwear. For small apartments, this is a very good option. It takes up as much space as a regular chair or bench, and also serves to store clothes.
Floor hanger with chair and bedside table - for full use of the hallway space
Another option: a nightstand with a hanger. The lower part of such a floor hanger is much heavier than its upper half, so it will not tip over from a couple of coats. The second plus of such furniture is the optimal use of space. The trouble with all floor hangers is that the lower 50-60 cm remain unused. In the case of a coat rack, this is not the case. This is another good way to use space efficiently for small hallways.
In the hallway, you can not do without a hanger. Of course, outerwear can be hung immediately in the closet, but it takes longer and is not so practical. The wall hanger is very convenient for narrow and small hallways, it is quite roomy and does not take up much space.
We offer you 5 workshops on making wall hangers with your own hands from improvised means: wood, leather, branches or pipes, as well as inspiring photo ideas.
This hanger in every sense will display the phrase “and I can also embroider with a cross”, show your creativity and become a good decoration for your home.
materials
In order to create it, you will need the following materials:
- perforated plastic or metal panel,
- multi-colored floss threads (in principle, threads for knitting are also suitable),
- scissors,
- hooks (in this case 4 pieces with a ball at the end).
ADVICE: Where can I get such a perforated sheet? At any hardware store or furniture store - ask for perforated sheet. And you will be cut to the right size.
Work order:
- We buy perforated sheet of the right size.
- Do the usual cross-stitch embroidery with threads, only a larger canvas.
- You can choose any word you like, or a simple picture (a heart, for example), the main thing is to calculate that everything fits and the spaces between the letters are the same.
- When the inscription is ready, attach the hooks through the holes in the panel and hang the hanger on the wall (you don’t even need to drill holes for the fasteners, they are already there).
Wooden hanger
If you have a pallet lying around in your country house, then this master class will help you find a useful use for it. If there is none, then the hanger can be made from an ordinary wooden board.
Necessary materials:
- Pallet or wooden board
- Hooks
- Paint and paint container
- Brush or roller
- Protective gloves
- Drill
- jigsaw
- Sander or sandpaper
- measuring tape
- Pencil
- Wood cleaning cloth
Step-by-step instruction:
Step 1: Wood preparation
- Separate one board from the pallet (or take a regular wooden board), clean it of dirt. Trim to size if too large.
- Using a grinder, make the surface even and smooth, if there is no machine, you can use sandpaper by hand, it will take more time, but the desired result can be achieved.
Step 2: Mark where the hooks will be
Using a measuring tape, mark the points where you will attach the hooks. They can be arranged in one line at regular intervals, or higher or lower through one, as you like.
Step 3: Drill Hook Holes
- Make holes for the hooks with a drill (pre-check that the width matches the desired size).
- After completion, clean the board from dust.
Step 4: Paint the boards
- Choose the color and type of paint, depending on your preferences and interior. Here I used water-based acrylic paint in bright blue.
- The paint can be applied with a roller or brush, along and across the board, evenly filling the entire space, the last ball should go along.
If desired, before painting, you can use a wood preservative to ensure its long shelf life.
Step 5: Insert Mounts
- On the back side of the board, insert the fasteners for which you will hang the board from the wall. They should be located symmetrically to each other, relative to the middle of the board.
- Hooks were used here, which are screwed into previously drilled holes. They are easy to attach, the main thing is that there is an appropriate diameter.
Create your own design - choose a color, paint patterns, choose the location of the hooks, as well as their color and size. Everything is ready!
From a copper pipe
This hanger is especially suitable for hat lovers. It is difficult for them to find a place where they would be stored and not wrinkled, in the closet it takes up too much space. This is also a great option for use with a direct purpose - for clothing, and for decorating a room. Of course, in addition to hats, a clothes hanger will also fit here.
Necessary materials:
- copper pipe
- Scissors
- Clothespins
- Rope
Step-by-step instruction:
Step 1: Prepare the base
Cut the rope just long enough to hang the hanger. Pass the rope through the copper pipe.
Step 2: Attach Hat Hanging Ropes
Cut a few more pieces of rope and tie them to the pipe, leaving enough space between them so that the hats do not interfere with each other later.
Step 3: Hang up the hanger
Attach the ends of the rope with copper pipe to the wall or ceiling (there must be hooks or a pipe for this). Attach clothespins to the ropes hanging from the pipe, now you can hang hats on them. You can also hang a clothes hanger on the pipe.
ADVICE: Choose the length of the pipe, depending on the amount of free space on the wall, hats and clothes.
As you can see, it is done very quickly, even in half an hour you can do it, but it looks very original.
Hanger made of leather belts
Such a wall hanger is suitable for the hallway, and the kitchen, and the bathroom. The type is similar to the hanger described in the previous master class, but its application is more universal. It will beautifully complement the interior of your apartment, while requiring very little effort and time to manufacture.
Necessary materials:
- Leather belts (2 pieces of fairly soft leather)
- Two small pieces of leather (tougher)
- Wooden stick (from a tree branch)
- S-hooks
- Scissors
- Thread and needle (suitable for leather)
- Leather punch
Step-by-step instruction:
Step 1: Preparing Belts
- Cut two leather belts to the desired length, they should be the same. Wrap the strap around the stick and mark how much you need for its girth.
- In the place where the strap converges after the girth, it needs to be sewn together to fix the stick so that it does not fall out. Do the same with the second belt.
- So that the seam is not visible, make decorative leather straps: wrap a narrow strap around the strap attached to the stick at the seam, and sew it, connecting the ends (the same with the second strap).
Step 2: Attach the hanger
With a leather punch, make holes on top of the belts (in the center of the width), for which you can hang this design on a wall or ceiling (on previously attached hooks).
Step 3: Hanging the Hooks
Hang the desired number of S-hooks on a wooden stick and the hanger is ready to use.
From branches and cuts
Branches and cuts are excellent material for a wall hanger. First of all, it's very affordable! And secondly, the tree will never go out of fashion and will perfectly complement the style of any apartment!
From the branches you can make a lot of crafts for the home - about this in the article .
From a pallet
If you are going to make a wall hanger and you are looking for a cheap and quick option, then a hanger made from wooden planks or pallets is exactly what you need. If you think that it will look ordinary and unoriginal, look at the selection of photos below and make sure that you can create a truly unique thing from these materials that will decorate the interior of the apartment.
Match the paint (or just preservative the wood to keep the natural color), hooks, shape the board, come up with your own way to decorate the boards.
More complex hangers can also be made from wood. More precisely, it’s not even a matter of complexity, they are laborious, you need to devote more time to them.
Manufacturing technology of hangers from improvised means
Summing up all the master classes, I would like to derive a single formula for manufacturing and creativity over hangers. Conditionally can be divided:
- The basis- can be any item from a finished board to old items.
- Hanger hooks- it is not necessary to buy, you can remove them from the clothes hanger.
The basis of improvised means
Also, for manufacturing, you can use things that at first glance are completely unsuitable for this: skis, oars, rulers, etc. How much fantasy is enough. A wonderful way to find a use for things lying around in the pantry.
Hanger hooks
Hooks also do not have to be standard (although their range of choice is quite wide). Start looking at things with the thought “where else can you be applied?”. I am sure that after training yourself a little, interesting ideas will start to come more often, and this applies not only to hangers, of course. 
Attach separate hooks to the wall, their design should look like a decorative element, even if there are no things on them.
Wall hanger ideas
More and more designers are coming up with ideas for creative and functional clothes hangers. Sometimes, their designs are quite elementary and not difficult for home implementation.
Metal, of course, is more difficult to work with, but if you want to create such a hanger, it will not be difficult. Make branches in the shape of a tree or hang hangers on a pipe - it will turn out solid and functional.
All these photos are a piece of what you can create with your own hands. Take the elements you like, combine, and most importantly - enjoy it all!
Click Class
Tell VK
A wall hanger in the hallway is an important element of storage. The layouts of many apartments have narrow corridors in which it is not always possible to place a full-fledged closet, so the owners are looking for alternative options. I want to keep the design of the apartment, comfort and ease of use.
There can be a lot of variations of hangers from the most standard and simple miniature shelves to futuristic and most unthinkable ideas.
The most popular materials for making hangers are wood and metal.
Forged metal hangers amaze with their beauty and smoothness of forms. They are used in Provence and Art Deco interiors. This version of the hangers is mounted on self-tapping screws, and more often hung on them. 
This option of hangers can be attributed to horizontal. Their function is only to store outerwear. Metal hangers often have an aged look, which gives them a picturesque look.
A very interesting option is the combination of forged elements and leatherette or fabric. Looks unusual and luxurious. Such a hanger will decorate any corridor and become its highlight.
The photo shows combinations of materials: wood with fabric and metal with fabric. The functionality and originality of products is preserved. In the first version, the wood gives an array and solidity to the furniture, and in the second, metal facilitates the composition and gives grace.
Hangers made of wood can be combined with a mirror, a shelf for shoes or for head appliances. The photo shows a very compact version of the hallway.
The hanger can have sections: for short and long top things, which helps prevent dirt on the wall.
A wooden hanger is completed with a shelf and a mirror, also a great option for small hallways.
When choosing a material, it is necessary to focus on its strength, whether the finished product will withstand heavy winter things.
For this function, you can strengthen the mount: use not only self-tapping screws, but also furniture corners.
Materials can complement each other, carrying their functions. Metal, as more durable, goes to the basis of the structure, and wood as decorative elements.
Ideas for hangers in the hallway from improvised materials
I picked up a lot of ideas when the hanger was made with soul from improvised materials. This can serve as inspiration for many families. I think that in the interior it is necessary to move away from stereotypes, because any design is unique with its non-standard solutions.
In the photo, a completely ordinary hanger from a piece of board is made in a marine style. The matching backdrop and anchor hooks add color to the entire hallway.
An interesting forged lightweight option, perhaps not entirely from improvised materials, but it has a place to be. A very functional and elegant option, it contains a stand for shoes and hats.
Connected in the form of rhombuses, slats with wooden hooks, it looks very eco-friendly and stylish. Placing the hooks at different heights allows you to hang a lot of things without creating an untidy pile.
Curved leaves made of thin aluminum decorate the walls in a peculiar way. And it will be very easy to make such a hanger at home. To do this, you can buy a sheet of thin aluminum in hardware stores. This material is easy to cut and quite malleable.
A pallet hanger is the most affordable and modern hallway decor option. Creates a loft atmosphere and is suitable for non-standard young people.
And, most importantly, it is completely environmentally friendly and strong material. With the help of corners and self-tapping screws, you can build both a shoe rack and a shelf. You can simply cover the pallets with varnish or stain, then a beautiful wood pattern will remain, or you can paint over with thick colored paint to match the overall tone of the interior.
For minimalistic designs, the hanger in the photo is just a godsend. Comfortable, without unnecessary details and looks very stylish. A rod is inserted inside, which allows you to make hangers out of the hanger.
I will give a small master class on making hangers from wooden coat hangers. It turns out two rows of hooks. The option is unusual, but very functional.
Having slats of different widths, you can create the simplest version of furniture by simply drilling hooks and adding crossbeams for fastening.
For nature lovers, you can use images of animals and birds, and an artificially aged wooden product will add history to the corridor.
An interesting combination of two materials: wood and metal. Modern compact hanger with built-in hooks.
Many times I have come across the ideas of cutlery hooks: forks and spoons, as in the bottom photo.
An interesting option for a plastic hanger for a small family. In the summer, it can only serve as a decoration.
DIY wooden wall hanger
To make a hanger, you need to take a few boards, either ready-made or bought in a store. You can use any wood: pine, oak, birch.
We will analyze two options for hangers.
We cut out the same sidewalls, the top and the middle crossbar, to which you then need to attach the hooks.
We cut out beautiful bends on the sides and skin all the details.
We connect into a finished structure with self-tapping screws, furniture corners.
We mark places for hooks and drill them.
We check the finished product for strength and varnish it.
You can make an even simpler version of the clothes hanger.
The photo shows the diagram and dimensions of the future product.
We take purchased boards or lamellas, in this case pine wood was used.
We measure the same distance between the vertical parts and fasten the frame from the wrong side. We drill any fasteners. The shelf will be hung on self-tapping screws.
We attach hooks to the front side at the same distance from each other. And we admire the result.
This hanger model can be supplemented with a shelf, to give contrasting colors. The photo shows an option when the crossbars do not go from the wrong side, but from the front.
Tell VK
