Infusion lines extension KD-Line (Germany) for a syringe dispenser of different sizes.

general information

Extension lines "KD-Line" are durable, reliable flexible tubes that provide highly efficient infusion therapy, or rather, long-term and strictly dosed infusions.

Highways also provide the opportunity to:

• To check and control not only the quality, but also the state of the solutions introduced into the patient's blood;
• Form an infusion line in a certain desired way;
• Providing access to catheters at a distance, the ability to perform all the required manipulations at a distance from the point of attachment of the catheter to the patient;
• A significant reduction in the risk of infection of the patient or mechanical irritation of the vessels.

Peculiarities

Extension lines "KD-Line" provide the possibility of intravenous and intra-arterial infusions. For their production, high-quality, durable transparent polyvinyl chloride is used, which is widely used in various branches of medicine. The same material ensures the presence of such a quality fixture as exceptional resistance to various kinds and degrees of kinks.

The main feature and advantage of the infusion lines is the presence on both sides of the Luer-Lok universal connections of the unisex type. They are adapted for use in conjunction with all kinds of injection needles, venous catheters of both types. "Luer-Lok" guarantees complete tightness, safety and reliability of the connection of the components of the infusion line - this allows you to ensure that there are no leaks of solutions and their external contamination.

These lines are type "Lp" or low pressure models. Their principle of operation is based on the force of gravitational influence. At the same time, the maximum indicator of resistance to pressure reaches 4 bar.

We offer

We offer you to buy extension lines of the KD-Line brand from a trusted and reliable manufacturer from Germany. Each unit of production is packed in an individual sterile package. The shelf life of the devices is 5 years.

The mains meet all modern international requirements and standards, are offered in assortment.

Infusion therapy is a difficult method of treatment, which is based on the infusion or slow introduction of drops into the main vessels or under the skin of medications or biological fluids. This type of therapy is used to restore the water-electrolyte balance or the acid-base balance, for the rapid delivery of drugs to the required point of application.

Modern infusion therapy is based on a number of simple principles, including:

• the importance of exceeding the likely benefits of infusion therapy over the risks that may be provoked by preparation for it or its implementation;
• it is necessary to ensure that the infusion always improves the general condition of the patient or, in extreme cases, does not affect him negatively (if there are negative effects, the procedure must be stopped);
• when conducting infusion therapy, it is necessary to constantly monitor both the general condition of the body and the indicators of its work and, if there are any negative disorders caused by infusion, review the procedure;
• infusion therapy requires careful prevention of its complications, including DIC, sepsis, hypothermic state, etc.

Ensuring adequate infusion therapy is not an easy task, which must be approached with all responsibility, even if it seems that there is nothing complicated in the process itself. In order to carry out infusions of funds intravenously or under the skin correctly, a variety of consumables must be available in the hospital, among which there must be an extension line for intravenous infusions.

An extension line for intravenous injections is a device of simple structure, which is used in order to inject certain drugs into the patient's body in accordance with the strictest dosage. In order to fully operate IV extension lines, the hospital must also have syringe dispensers that inject the drug.

The extension line for intravenous injections is made of medical polyvinylchloride. This material is well tolerated by patients, very rarely causing negative allergic reactions, unlike the same latex. PVC tubes are also resistant to kinks, which means that you can not be afraid that if you move carelessly, the flow of the drug into the bloodstream will stop abruptly. The transparency of the tubes provides good visual control over the course of the infusion.

All intravenous extension lines are sterilized and intended for single use, as PVC does not respond well to anti-infective treatment. In addition, such lines are cheap enough that they can be used in hospitals once. Thanks to this, it is possible to reduce the infectious risks of transmitting a disease from one patient to another to almost zero.

In any hospital for infusion therapy, there should be an extension line for intravenous infusions. A potential client can get acquainted with various types of extension lines on the website of the Glavmed company. To make the most optimal choice of consumables for a particular hospital, customers will be helped by website consultants who are ready not only to tell in detail about all the goods, but also to help with filling out an application and arranging delivery. Glavmed guarantees its customers not only the high quality of the supplied equipment and consumables, but also competitive prices.

The Onlymed company is your guide to the world of high-quality medical products from the best brands in Europe, which have established themselves as the undisputed leaders in the production of high-quality products. These include products intended for infusion therapy, namely an extension infusion line. It is used for the introduction into the circulatory system of the patient drugs, strictly dosed and on a long-term basis.

Extension line: properties and applications

There are a number of standard requirements that such a product must meet. Among the main characteristics are the following:

• transparent polyvinyl chloride as a raw material for manufacturing, which allows you to constantly monitor the process of drug administration;
• disposable packaging with sterilized contents;
• non-toxic hypoallergenic materials;
• UV protection for preparations with high photosensitivity (dark amber color).

Extensions (lines) for syringe dispensers - are intended for connection of devices for carrying out infusion therapy with the device of vascular access of the patient.

Available in two versions:

For use with special syringes for infusion pumps with a Luer-Lock connector. Consists of an extension tube, FLL connector and MLL connector.

For use with standard luer lock syringes. It consists of a connecting tube, a Luer connector and a tip with a plug.

Producer: "Viroban", Russia

Specifications:

Line to syringe dispenser Luer-lock d-150 cm

Extension tubes for low pressure TRO-EXTENSOR Lp and high pressure TRO-EXTENSOR Hp, (length 150 - 300 cm)- used to connect the source of infusion (infusion set, infusion pump, perfusion pump) with an IV catheter (peripheral or central)

Description, properties:
Flexible, transparent extension tubes allow infusion therapy, control the quality and condition of the injected solution, give the necessary shape to the infusion line, provide remote access to the catheter, facilitate all necessary manipulations at a distance from the vessel catheterization site, reduce the risk of infection and mechanical irritation of the vessel. They have Luer-Lock connections (male, female) adapted to injection needles, peripheral and central venous catheters. This type of connection provides a tight, safe and reliable connection of the elements of the infusion line, which prevents the risk of leakage of the infusion solution and its external contamination.

The product is sterile, non-pyrogenic, non-toxic.

There are two types of extension tubes available:
- low pressure (Lp), which are used for infusions to the patient due to the action of gravitational pressure, i.e. at low pressure up to 4 bar/60psi (inner diameter 3.0 mm, outer diameter 4.1 mm.)
-high pressure (Hp), which are used for infusions to the patient using infusion pumps and pumps, i.e. at higher pressures up to 55 bar/800 psi (inner diameter 1.5 mm, outer diameter 4.1 mm.)

Standard tube length: 150 cm.
Tube length: 10, 25, 50, 75, 100, 200, 250, 300, 600 cm - ordered and produced under ORDER!(opaque and transparent)

Specifications:

Medical products Troge Medical GmbH comply with international valid standards such as EP, BP, USP, as well as DIN EN and ISO.
Quality: CE
Material: PVC
Sterilization: ethylene oxide
Shelf life: 5 years
Package: individual, sterile
quantity per pack/box: 40/400

Manufacturer:
Troge Medical GmbH, Germany

Medical extender - infusion line MIM, Russia

Medical extender (infusion line) designed to connect the source of infusion (infusion set, syringe pump syringe) with an intravenous catheter.

Flexible, transparent tubing Extension line to syringe dispenser allow for infusion therapy, control the quality and condition of the injected solution, give the necessary shape and direction to the extension cord, provide remote access to the patient with the catheter, facilitate all necessary manipulations at a distance from the vessel catheterization site, reduce the risk of infection and mechanical irritation of the vessel.

Extension cords have "Luer-lock" tips (male and female) which are adapted to injection needles, venous catheters, Luer-lock syringes. This type of connection provides a tight, safe and reliable connection of the elements of the medical extension (infusion line), which prevents the risk of leakage of the medicinal product and its external contamination.

used for intravenous infusion of photosensitive drugs.

Specifications:

The extension can withstand pressure up to 4 bar.

Working length of the medical extension, mm: 1 500; 2500; 3500; 4500.

Inner diameter of the medical extension tube, mm: 1.5±0.1; 3.0±0.1.

The tube of the medical extension is made of high quality polyvinyl chloride approved for the manufacture of medical devices.

Package:
hermetic blister made of thermoformed film and gas-permeable paper or a special sleeve made of the same materials.

Extensions are sterile, non-pyrogenic, non-toxic

Sterilization gas: EO, ethylene oxide.

Shelf life: 5 years from date of sterilization

Producer LLC "MIM", Russia

Infusion line - extension for a syringe pump (manufacturer: "Frebor", Belarus)

single use type PI 1.0 x 1.5 and 1.5 x 1.5(tube inner diameter in mm. X wire length in meters) are intended for long-term intravenous administration of liquid medicines using a syringe dispenser (pump).

Conductor infusion with a transparent tube designed to control air bubbles in the patient's venous bed. The small internal diameter of the tube ensures a minimum residual amount of injected drugs.

Infusion guide with opaque tube It is intended for the introduction of drugs that are destroyed by light. Conductors with light-tight tube for disposable use. The small internal diameter of the tube ensures a minimum residual amount of expensive drugs to be injected.

Conductor infusion connecting connector with a cone type "Luer-Lock" suitable for injection needles, peripheral and central venous catheters, perfusors, the cones of the conductor are protected by protective caps, which ensure the sterility and non-pyrogenicity of the internal environment of the conductor.
The movable guide nut allows you to securely fasten the injection needle, catheter and other devices for injecting drugs.

Specifications:

Standard tube length: 1500 mm.
Working length can be (mm): 750, 1500, 2000, 2500, 3000, 6000
Tube Inner Diameter (mm): 1.0, 1.5 and 3.0
Transparent and opaque tube(for drugs that are destroyed by light);
Sterilization: Gas - Ethylene oxide (EO)
Package: Sealed bag made of thermoformed film and gas-permeable paper.
Shelf life: 5 years from date of manufacture.

Manufacturer: JV "FreBor" (FREBOR), Belarus

Extension line for syringe dispenser, Apexmed

Extension infusion line Apexmed- designed for intravenous infusion of drugs using a syringe dispenser in medical institutions. If necessary, it can be used to lengthen more complex infusion lines (for example, in hemodialysis). The light-tight infusion line is used for intravenous infusion of light-sensitive drugs.
The Luer-Lock connector is equipped with a union nut that allows you to fix it on the catheter or needle.

Extension line characteristics:

It has a luer lock on one end and a luer lock on the other.
- transparent material allows visual control.
- the connector is equipped with a union nut that allows you to fix it on the catheter or needle.
- made of implantation-non-toxic polyvinyl chloride.
- tube length 150 cm.
- inner diameter 3.0 and 1.5 ± 0.1 mm.
- protection of photosensitive preparations from UV rays with a wavelength of 290 - 450 nm (light protection line)
- quantity per pack/box - quantity per pack/box - 1.6 mm = 100/800 pcs, 3 mm = 60/480 pcs.

Types of extension lines:

Manufacturer: