Cast iron stoves for the home. Cast iron wood stoves for summer cottages, which one should you choose? Features of the device of cast iron furnaces

Heating stoves are designed to heat small houses, as well as cottages and industrial premises. They are very convenient, especially for summer cottages, because they can only be lit if necessary, and such stoves can quickly heat a small room.

Wood-burning stoves for summer cottages are quite compact in size and take up significantly less space than. Some models have additional functions: cooking, for example. This is possible due to the presence of an upper flat surface through which flue gases pass. Some of the ovens are equipped with a hot water circuit (to heat the water in the tank) or an oven.

Furnaces for summer cottages are produced by many companies: Breneran (Bulleryan), Professor Butakov, Termofor, Teplodar, Ferlux, Jotul, Sergio Leoni, Edil Kamin, Keddy, Supra, Nunnauuni, Thorma.

Heating wood stoves from the domestic brand Professor Butakov stand out among competitors with high heat transfer from the surface due to large convective pipes and their ergonomic mounting in the system. The branch pipe connecting the chimney pipe is located at the top. The condensate flows into the furnace and burns directly there. The manufacturer produces stoves suitable for heating rooms of various sizes (150 - 1200 m3). The rated power of the models varies between 9-55 kW.

The furnace for heating the dacha produced by Breneran looks like a design with pipes. Such a system is capable of providing forced convection. The advantage of this design is a fairly rapid heating and smooth distribution of air throughout the room. Approximately 4.5 cubic meters of heated air passes through the smallest oven in the model range per minute. At the same time, the wood stove itself does not heat up.

The Thermofor wood-burning stove called Fire Battery attracts with its aesthetic design, which allows it to be organically introduced into any modern interior. The name of the furnace is very eloquent and true: the efficiency of this model is 85%. The large volume of the combustion chamber of the furnace makes it possible to warm up rooms of 150 cubic meters well. This heating stove is, in addition, also a cooking stove. There are several dimensional options for the model, which makes it possible to select the best option that is perfect for your specific cottage.

The range of Edilkamin stoves is quite wide. Among the many models presented, you can easily choose the type of stove you need with the color of the cladding that suits your interior. By purchasing a wood-burning stove from Edilkamin, you will receive an environmentally friendly energy-saving heating device and at the same time decorate your dacha.

Furnaces from the Spanish brand Ferlux are designed, manufactured and tested in accordance with current European standards. Furnace equipment of this brand has a CE mark of conformity. Most of the models of this company have more efficient combustion - due to the installed dual combustion system. This design allows you to increase the efficiency and reduce wood consumption.

Jotul cast iron stoves are characterized by a unique design, incredible efficiency, high functionality, safety, ease of operation, durability and strength. Heat-resistant enamel, presented in four different shades, makes it possible to match the oven to your interior.

The Keddy wood burning stove is designed to heat your home efficiently and safely. The cast-iron spacious firebox of such a stove will make it possible to quickly heat the room. Keddy's high-quality oven equipment, materials and clean Scandinavian design will not leave you indifferent.

Furnaces for heating from the Finns NunnaUuni will not only be a full-fledged source of heat in the house, but also an attractive element of decor.

Wood-burning stoves from the French brand Supra embody modern style solutions and perfectly complement the interior. The heating stoves of this company are made in 3 versions: a cast iron stove, a steel stove of different colors and a stove with ceramic inserts.

The heating furnace from Thorma is an excellent combination of a reasonable price and European quality. A wide range of ovens allows you to choose the best option. Durability and safety are the most important characteristics of Torma ovens. Due to their amazing appearance, high efficiency and excellent quality, wood stoves from this company are gaining popularity.

On our website are presented, and for giving, cast-iron, inexpensive, stoves for small and large rooms.

For the most efficient heating, we will select a stove of the required volume for you - we have stoves for 50-1000 cubic meters - conventional and convection.

It is possible to buy heating furnaces for the house and giving with delivery and installation from us. For each stove, we will select a chimney for you or offer options for ready-made chimney installation kits.

Cast iron stoves for a long-burning house are one of the best options, as they have many advantages over conventional solid fuel heating appliances. Due to their technical characteristics, as well as due to the external design of many models, they are perfect for installation both in a small country house and a large well-kept mansion.

Even if there is a gas supply to the house and the creation of a completely efficient water heating system, a cast-iron stove may not be superfluous, as it will help maintain comfortable living conditions in the off-season or on rainy summer days. In addition, the "living heat" from the stove always creates some kind of special comfort.

Manufacturers of long-burning stoves claim, and practice proves that devices with a classic design are not as efficient as their products, since they heat the room only due to the active combustion of fuel in a conventional furnace. When firewood is completely burned out, appliances with a conventional fuel combustion scheme cool down quickly, therefore, in order to maintain the desired temperature in the room, it is necessary to constantly add fuel. When using long-burning stoves, the frequency of loading the stove with firewood is reduced to two, or even once a day.

The basic principle of operation of long-burning furnaces, their design features

Long-burning cast iron furnace "Gomont"

The Gomont fireplace stove has a rather elegant appearance, which differs from the appliances mentioned above. Made in a restrained style, it will fit into any of the modern interiors. Heat-resistant SCHOTT ROBAX glass-ceramic, resistant to high temperatures, is installed in the door as glass. The large size of the transparent part of the door, which is equipped with a self-cleaning system, allows you to observe the beautiful processes taking place in the combustion chamber.

The technical characteristics of the Gomont oven are as follows:

The furnace has channels for supplying primary and secondary air. There is a capacious drawer for ash, which is hidden behind the oven door. The regulation of the intensity of the burning of fire, as in all furnaces with long burning, occurs by supplying a larger or smaller air flow.

The manufacturer's warranty for this product is 5 years.

You might be interested in information on how to build

Another example of a French-made long-burning cast-iron stove is in the attached video:

Video: Supra Cast Iron Stove "Tomera"

Long burning stove "La Nordica Rosa"

This version of the stove has an original design, which is perfect for both modern and retro-style furnishings. Its external finish is not only decorative, but also functional, as it is able to keep the device hot for a long time, but preventing its external surfaces from heating up to too high, dangerous temperatures.

A very original and functional model - long-burning stove-fireplace "La Nordica Rosa"

This version of the heating and cooking stove is made of several materials, so it can be called combined.

Its internal structure is made of high-quality cast iron, and the body is made of high-class steel. Facing made of natural stone or ceramics gives the model an aesthetic and elegant appearance.

The oven is equipped with a hob and an oven, which has an internal heat-resistant enamel coating.

The technical characteristics of this device are given in the table:

The device has channels for supplying primary and secondary air, which allows you to adjust the air flow entering the combustion chambers from the outside. Glasses are made of glass-ceramic, capable of withstanding temperatures of 750 degrees.

The stove is able, with good adjustment, to ensure the burning of one bookmark of firewood with efficient heat transfer to the premises for at least 8-9 hours.

The ovens are available in two color finishes - burgundy and beige (cappuccino), which also contributes to their adaptation to various interiors.

In conclusion, it should be added that the range of long-burning cast-iron heating stoves is so large that it is possible to choose an option for every taste and income. There are models that are simple in design and design, which have a relatively low cost - they are perfect for installation in the country. And if desired and possible, you can find expensive options lined with decorative ceramic tiles, perfect not only for heating needs, but also for decorating any, even the richest living room. Calculator for calculating the heating of a private house 1 5

Modern cast iron stoves in the online store Yunons Stoves are presented in different modifications, suitable for heating rooms of different sizes. Such equipment will be an excellent source of heat for a summer residence or a country house.

Advantages of cast iron stoves

Thanks to the material of manufacture, a large heat capacity is guaranteed, so the heat will be stored for a long time. It is recommended to buy cast iron stoves in Moscow, as they have the following advantages:

Operational safety;

Economical fuel consumption;

Autonomous work for several hours;

Fast ignition;

High efficiency.

Thus, there are many reasons to buy a cast-iron stove for a country or private house.

Buying a cast iron stove

The catalog of the Yunons Furnace store presents models of long burning from European and Russian manufacturers. Today, such cast-iron stoves in Moscow have an attractive appearance. We are always ready to provide the most complete information on any model and help in choosing the equipment that is right for your home. We will deliver your order quickly both in Moscow and throughout Russia. You can both buy inexpensive cast iron stoves from us, and order a professional installation.

For people who relax in their summer cottage, not only in summer, but also in winter, it is important to equip the house with a good heating device. Drying clothes, heating your home, and cooking food do not require an expensive heating system. Many successfully use wood-burning cast-iron stoves for summer cottages. Installing such a design yourself is quite simple.

If you have a country house, then a cast-iron stove is clearly for you.

Criterias of choice

The country house needs only periodic heating, so the fireplace stove must withstand long breaks in operation. In addition, it should warm up as quickly as possible and have high heat transfer. And also it is worth choosing a device that is able to work for a long time on one kindling and retain heat.

It is best to select a device that can work not only on wood, but also on some other type of fuel. This is due to the fact that in winter it is not always possible to find dry and high-quality wood for kindling. Ideally, choose a combined design, on such models there is not only a heating surface, but also a hob. So you can always heat water or cook food.

From this video you will learn the specifics of the Baron cast iron stove from Eurokom:

Wood-burning cast-iron stoves for summer cottages, in which a water circuit is built in, are very popular. Such models allow you to warm water for dishes or a shower, in addition, they also heat neighboring rooms, and not just the one in which the appliance is installed.

In addition, the heater should not be too bulky; it is better to give preference to compact stoves that are simple and easy to use. Basically, modern cast-iron heaters designed for summer cottages meet all these requirements.

Characteristics of devices

In a dwelling that has not been heated for a long time, dampness and high humidity prevail, and they, in turn, have a negative effect on any metal appliances, so the latter wear out much faster. Cast iron products are very resistant to condensate, so they are not afraid of corrosion. Cast iron stoves for summer cottages on wood will be an ideal choice, they have increased wear resistance and durability.

The condensate that occurs on the walls of the furnace, in the chimney, when melted, mixes with the volatile substances of the smoke and settles on the details of the metal appliance, gradually destroying them. Cast iron fuel chambers are not affected by such exposure. The only problem that the summer resident faces is that the surface is quite difficult to clean from the resulting plaque.

But as for the heating rate, cast iron appliances are inferior to metal heating structures. The fact is that the thick walls do not allow the stove to warm up quickly. Although this cannot be called a minus, since they cool down much longer, respectively, and their heat transfer is longer than that of steel devices.

In addition, a wide selection of cast-iron wood-burning stoves for the home is presented, which are compact and have a presentable appearance. Almost all modern models have additional lighting, water tanks and a hob.

Cast iron oven Lava “Ferlux Lawa”:

Advantages and disadvantages

Like any other heating installations, cast iron stoves have their advantages and disadvantages. As for the advantages, the following characteristics can be distinguished:

1. Low cost. These fireplaces are several times cheaper than other heating appliances.
2. The stove can be purchased ready-made, so it does not have to be assembled. It is enough to perform elementary actions: choose a place and connect it to the chimney, anyone can handle it.
3. Cheap wood is used for kindling, so this stove is considered very economical. In addition, you can not be afraid that harmful chemical compounds that are released during the combustion of another type of fuel will get into the air. In addition, such devices work great on other woodworking waste, as well as on coal.

Furnace for a country house:

In addition, cast iron stoves do not have any electronic filling, so the possibility of failure of such a fireplace is excluded. Even devices that are equipped with fans for forced draft have a high reliability index, which makes them leaders among all furnace designs designed to heat a summer house.

Naturally, such popular heating devices also have their drawbacks, although there are not so many of them. These include:

1. The fragility of the material is the main drawback of a cast-iron stove for a wood-fired cottage. During transportation or installation, care must be taken to handle the parts, avoid impacts.
2. Instability to temperature changes. This is also a significant minus, the fact is that due to a sharp change in temperature, the stove can simply burst. Even ordinary cold water spilled onto a hot surface can damage the integrity of the device. That is why the heating and cooling of the structure should be gradual.
3. Big weight. Although these stoves are compact, the design as a whole is quite heavy. A standard heating device with a power of 9 kW will weigh about 70 kilograms, and some models even more. Therefore, when installing it is necessary to take care of a reliable and solid foundation.

Cast iron long burning stove S43 (Nestor Martin):

In addition to the above points, such cast iron installations are unsafe. Therefore, when igniting and during the operation of the stove, you will have to constantly monitor it, especially if there are small children in the house, because you can easily get burned. During operation, the cast iron surface becomes very hot, so install the device away from flammable objects. And it is better to completely clean the space around the furnace.

Installation work

Basically, all models of cast iron heaters consist of three elements: a furnace, an ash chamber, where combustion waste enters, and a chimney.

Since this design is equipped with a grate, almost all the ash and ashes enter the ash pan on their own. The air flow required for combustion is regulated by an ash door.

The process of assembling a cast-iron heater is carried out according to the following scheme:

1. At the very beginning, you need to choose a place where the structure will be installed. At the same time, it must be borne in mind that there should be at least half a meter of free space on the sides and behind it, and at least 1.25 meters will be required on top and in front.
2. Refractory material must be laid under the furnace appliance and the furnace door. It can be ceramic tiles, metal sheets or bricks, this will protect the house from fire. It is advisable to upholster the wall behind the appliance with such material, especially if the country house is built of wood or upholstered in plastic.
3. After all fire-fighting measures are taken, proceed to the installation work. The furnace is placed and fixed on the refractory material.

Stove-fireplace of long burning "Selenga":

Then proceed to the installation of the chimney, it must be connected to the device. Perform these actions strictly according to the instructions., each specific model has its own type of connection. It is possible to use such a cast-iron stove only after the collar flange is thoroughly calcined.

Operating principle

As a rule, all cast-iron wood-burning stoves have the same principle of operation. Some models, which are equipped with a fire-resistant glass door, allow not only to heat the room, but also to admire the view of burning wood. Appliances with a convection heating method are usually also equipped with a hob, on which you can cook a delicious dinner. There are devices in the form of an improved potbelly stove, which can also often be seen in a country house.

Heating cast-iron installations are popular due to the fact that they do not need to be heated every three hours, it is enough to throw firewood into the stove in the morning and evening, and it will be cozy and warm in the house all day and night. In addition, the design can be modified, and then it will work on the principle of pyrolysis combustion.

Cast iron wood burning stove Canaria Liseo Made in Germany:

This is done quite simply: a metal damper is installed in the combustion chamber, which limits the supply of oxygen. In this regard, the wood begins not to burn, but to smolder. The burning tree begins to emit combustible gases, which, together with smoke, penetrate into the second compartment of the furnace. Hot secondary air also enters there. The gas, after contact with this hot stream, ignites and gives off additional heat to the dwelling, which ensures a fairly long burning time.

But for all this to work, it is necessary to heat the stove with dry wood, the humidity of which should not exceed 25%. Otherwise, pyrolysis gas simply will not be produced in the required amount, so the burning process simply will not occur. In winter, finding dry wood will be quite problematic. Despite this, cast iron heating systems are very popular in country and country houses due to the low cost of construction, durability and high-quality and long-term heating.

04.09.2017
9136
Pechnik (Moscow)

A cast iron fireplace stove is a profitable and optimal solution for both a large country house and a small cottage that needs periodic heating. The main advantage of such a heating unit can be called its efficiency and affordable cost, compared with brick counterparts or electric models with flame simulation. In this article, you will learn how to properly operate cast iron stove fireplaces, all about their varieties, and you can also choose a purchased model using the current rating.

Design features

Like all other types of heating installations, cast iron fireplace stoves have a number of their characteristic differences and features:

Tip: if you want to make such a stove with your own hands or just choose the right option, we recommend that you pay attention to models whose combustion chamber is lined with bricks inside, as it tolerates high temperatures up to 700-1000 degrees and their sudden changes. In addition, over time, such a coating can be easily replaced.

Important: also the combustion chamber itself can have both a closed and a completely open structure. Open ones are characterized by low efficiency and do not create the proper level of safety during operation, which is why in most cases they are used in decorative structures. Cast iron stoves and fireplaces with a closed type are more efficient, have a high efficiency, heat up quickly and are usually equipped with various doors and screens.

The most convenient to use, maintain and from an aesthetic point of view is tempered transparent glass!

Interesting to know: despite the fact that cast iron fireplace stoves do not have special automated control, it is possible to control and set the intensity of the flame burning in the hearth. For this, a special damper is provided, which is additionally equipped with an ash pan.

Cast iron fireplace stoves are distinguished not only by their durability and good tolerance to high temperatures. They are able to accumulate accumulated and generated heat, releasing and distributing it throughout the premises even after the end of the firebox.

Classification of cast iron furnaces

First of all, cast-iron stoves, fireplaces for the home are classified based on the place and method of their installation, placement:

• Wall. They are small in size and do not take up much space during installation;
• Built-in and suspended. Such fireboxes look original and stylish in any interior of the room;
• Angular. An advantageous viewing angle to the flame burning in the hearth, as well as the simultaneous saving of free space;
• Island. The most massive models have high power and can be placed on any site that is most convenient and advantageous from your point of view.

Important: when choosing cast iron stoves and fireplaces, pay special attention to their functionality. Such devices can perform an exclusively heating function. Some hearths are intended only for cooking and are analogues and prototypes of stoves for firewood. The best ovens advantageously combine these two functions at once, however, the price for them will be an order of magnitude higher.

It is interesting to know: also cast-iron fireplaces and stoves, despite working with solid fuel, can function on coal, wood or purchased pellets. It is equally important when buying to pay attention to the power of the heating unit, which should correspond to the total area of ​​\u200b\u200ball the premises of the house. When getting acquainted with the characteristics of the product, do not confuse the rated power with the maximum.

Basic rules of operation

Cast iron fireplaces for the home require a careful choice of not only functionality and design, but also compliance with the basic operating rules:

1. Despite their high strength, durability and good tolerance to high temperatures, cast iron products are prone to destruction and deformation in the event of a sharp temperature drop. Therefore, such models are categorically not suitable for installation in houses that need periodic heating, for example, in a country house;
2. Cast iron fireplaces for the home, as a rule, require the use of a certain type of solid fuel. Therefore, models that work on pellets will quickly become unusable if simple firewood is used instead;
3. Any contamination, rust and corrosion that form on the surface of the installation must be removed in a timely manner, as they gradually destroy the walls of the product;

1. The chimney must have a strictly vertical arrangement, with a minimum number of horizontal sections - this will ensure the uninterrupted and full operation of the traction mechanism. In this case, the length of all sections will be at least 5-6 meters;
2. A cast-iron potbelly stove stove will be more efficient if, during the heating process, its door remains in a hermetically closed state. Equally important is the quality of the logs. Before application and use, they are completely and well dried, split into elements of the required and identical sizes.

Important: in order to ensure high-quality and trouble-free operation, a cast-iron fireplace stove with or without a stove should be checked by a specialist at least twice a year. And coniferous woods are not used for the firebox, as they smoke a lot and emit a large amount of soot and soot.

Performing installation work

A cast iron fireplace stove with a hob, as well as the simplest models, has a similar and fairly simple installation that does not require certain knowledge, skills, professional and expensive equipment, tools.

Installation and installation instructions:

• Installation and selection of a place, a room, is carried out according to the location of the chimney itself, in the event that it has already been brought into the house;
• The chimney has a vertical arrangement. This element can be laid out of refractory bricks or assembled from stainless steel sandwich pipes;
• Cast iron insert in the fireplace can be included in the original kit or purchased separately;
• Regardless of the quality and materials of manufacture of the floor covering, before installing the hearth on it, a small podium or pedestal is laid out from any heat-resistant coating;

If there are special fasteners, the model must be fixed

• When completing the hearth with a portal, the frame materials used for cladding should also be distinguished by high strength, environmental friendliness and fire resistance. At the same time, the style of the product must be in harmony and intersect with the interior of the room chosen for installation;
• The chimney is fixed at choice in the back or top of the hearth;
• In the presence of fixing elements, the installation is given stability by fixing them in the necessary way.

Interesting to know: if you want to assemble such a fireplace at home, you will definitely need to master cast iron for fireplaces. This will open up more opportunities for you and in the future will allow you to make even the smallest details, elements and decor from this material with your own hands.

You can also learn more about the process of installing and choosing such a furnace by watching the video in this article.

Top five models

Not knowing how to overlay a cast-iron fireplace and make it on your own, we recommend purchasing a ready-made version. The following rating will help you with this:

1. ambra. The model is made by the brand of Polish origin Eurocom. Its service life averages about ten years, with a power of 7 kW. The cast iron surface is platinum-plated for added protection, and the design is retro-inspired, with many beautiful and delicate patterns and swirls. The model is able to heat the house, the total area of ​​​​all rooms in which reaches 60-70 squares. The upper part of the structure is equipped with a hob, on which, if necessary, you can cook food, heat water. Door equipped with transparent tempered glass, which is equipped with a self-cleaning mechanism. The model has a small mass and optimal dimensions: 840x48-x360 millimeters (height, width, depth). The price of a fireplace varies from 20,000 to 25,000 rubles;

1. Legend. The fireplace from the Russian manufacturer and brand Vesuvius is specially designed for installation and use both in baths and in adjacent premises. Suitable for rooms with a total area of ​​up to 30 cubic meters, with a power of 30 kW. A special grate is located in the upper part, into which special stones are poured. The combustion chamber is completed with a large transparent tempered glass, which is able to periodically clean itself from various kinds of contaminants. High quality and durability of the product is achieved due to the presence of thick walls - 1.2 centimeters. Installation dimensions are: 76x65x83 centimeters (height, width and depth). You can buy such an oven on average for 30,000 rubles;

1. Furnace unit "If" from the manufacturer "Konig Feuer". The unit is equipped with a convenient and practical hob for one large burner. The device is made in the Empire style and has miniature overall dimensions in the ratio of height, width and depth (77x70x40 cm). The maximum efficiency when using this model can reach about 70-80 percent, in an economical mode of operation. Due to the large and capacious combustion chamber, sufficiently large and long bars are suitable for use in the furnace. The power in this case is 14 kW, which allows you to heat a house with a total area of ​​up to 280 cubic meters. An elegant and miniature door made of cast iron and tempered glass serves as both protection and decoration. The cost of such a fireplace is about 48,000-55,000 rubles;

1. Bavaria. This stove is produced by one of the most popular Russian companies "Ecofireplace". The device has a high power of 9 kW and high efficiency. This heating unit is enough for use in a house with a footage of up to 90 squares. Suitable for installation in rooms with any area due to its miniature overall dimensions: 750x560x400 millimeters. The design is equipped with a convenient hob and is able to work in economical mode. In order to increase efficiency and efficiency, the sides of the unit are finished with marble-effect ceramics. The average price for Bavaria is 18,000 rubles;

1. Marseilles. The model is made by the well-known and popular Russian company Meta. It is based on high-quality and durable French cast iron. The power of the product is 14 kW, which contributes to the rapid and uniform heating of rooms with a total footage of up to 140 square meters. Models are available in various sizes and have a rectangular elongated shape. The body of the fireplace is painted with black protective paint, and the combustion chamber is completed with heat-resistant transparent panoramic glass. The fastest heating and high efficiency is achieved due to the ability to place the fuel in a vertical position. You can buy such a furnace for 50,000 rubles.

For a visual acquaintance with the presented models, we recommend that you also view the presented photos.

A cast iron fireplace stove is a profitable and more affordable alternative to rather bulky and difficult to implement brick structures. In addition, the installation of such models is very simple and does not require experience and knowledge in this area. In order to buy or learn more about these and many other fireplaces, we also recommend that you go to the appropriate catalog of our online store and place an order at any convenient time!