Liquid wallpaper for the ceiling - a chic do-it-yourself decor. How to apply liquid wallpaper to the ceiling: tips from professionals Liquid wallpaper how to apply it to the ceiling

Liquid wallpaper is a beautiful design finishing material that resembles marble chips from a distance, and flock close up. Wallpaper is applied to vertical and horizontal surfaces, looks rich and has a lot of advantages. If you look at the photo of liquid wallpaper on the ceiling in the interior, they will amaze with their respectable and spectacular appearance.

Advantages of liquid wallpaper

Liquid wallpaper is a finishing material consisting of cellulose, silk or cotton fibers, eco-friendly water-based dye, acrylic dispersion binder, CMC wallpaper glue. Colored flocks or marble and quartz chips may be present in the composition to give the effect. Often, the composition of the mixture of liquid wallpaper includes mica sparkles, which are sold in a separate package and are added to the mass during kneading.

Liquid wallpaper has a number of advantages over conventional wallpaper and decorative plasters:

• Before applying them, it is not necessary to perfectly level the ceiling, as they have filling properties.
• They don't need a lot of space to cook. They do not need to be spread, cut and smeared with glue.
• They are easy to apply and form a monolithic elastic coating that does not deform as a result of house shrinkage. They fill well the joints between the ceiling and the ceiling plinth or cornice, rosettes for chandeliers.
• The microporous structure provides good thermal and sound insulation, forming a breathable surface. Under them, the greenhouse effect does not form and dampness does not occur, leading to the appearance of fungus.
• The coating does not absorb odors and does not attract dust, does not emit toxic gases during combustion.
• The coating is distinguished by high maintainability. It is enough to wet the damaged area with water and spread the material over the surface with a spatula.
• If excess material remains after work, it can be dried and left until the next use or in case of repair.

Wallpaper classification

The range of wallpapers is quite diverse. There are not many manufacturers of this material on the market of finishing materials. The most popular and bought due to availability and low price is the products of the Russian company Silk Plaster. The Turkish manufacturer Bayramyx has approximately the same assortment. For premium interiors, the finishes of French manufacturers Fibres de cotex and Senideco are used.

Cotton

Cotton wallpapers are made from 100% natural natural cotton, they are distinguished by softness and high environmental friendliness. The composition of the mixture includes 98% cotton, and 2% are natural impurities: cellulose, mica, textile fibers. They are not afraid of drafts and shrinkage, do not bubble, do not move away from the walls. This is an ideal find for decorating rooms designed for children's pastime. Manufacturers of cotton liquid wallpaper offer up to 240 different shades. You can always also mix several colors together.

Cellulosic

Cellulose wallpaper is in great demand due to its affordable cost. In appearance, they look like silk, although they cannot boast of the same durability. Over time, they lose color. The general recommendation of a specialist is that if repairs are carried out in an apartment every 5 years, then this is the best choice in terms of price and quality. If you want to make repairs for centuries - choose silk ones.

Silk

Silk liquid wallpaper is a premium class wallpaper. The high price of them more than pays off with their beautiful appearance and durability. The composition of the material includes silk fibers. The resulting coating looks great due to its silky texture, does not fade in the light, does not change color and looks great for many years, which can be seen in the photo.

mixed

Mixed or combined silk-cellulose wallpaper is the best option in terms of price / quality. The composition of the material includes silk fibers with cellulose. Such wallpapers are resistant to ultraviolet radiation and retain their original appearance for a long time.

The procedure for applying wallpaper to the ceiling

Liquid wallpaper tends to draw dirt and rust to the surface from insufficiently treated surfaces. Therefore, before applying wallpaper, the ceiling must be processed. It is not necessary to especially level the surface, since liquid wallpaper swells during preparation and fills small cracks and irregularities. The reason for the appearance of stains can be non-removed metal objects: brackets, screws, nails. If earlier the ceiling was treated with copper sulphate, ugly stains may also appear. To prevent this from happening, you can wipe the surface with bleach and chlorine.

For the same reason, you should not apply the material on brightly colored surfaces. To prevent the appearance of an unexpected shade, it is necessary to prime the pre-painted ceiling and paint it with white paint. To prevent the appearance of stains, apply a primer in two layers. The technology of applying the primer provides for coating in two perpendicular directions.

The preparation of the walls also changes depending on the base material:

• Old Khrushchev houses are made of porous material, so the surface under the wallpaper must be painted with oil paint.
• Brick walls should be treated with a gypsum mixture and go over with a primer on top.
• Metal self-tapping screws in drywall bases must be covered with putty or painted over with oil paint.
• Leaks are also pre-painted with oil paint.
• Wooden surfaces are pre-treated with a water-based emulsion.

It is enough to mix the purchased ready-made wallpaper before applying. The process of preparing a dry mix is ​​different:

1. pour the mixture into a plastic bucket;
2. pour water in accordance with the instructions from the manufacturer;
3. mix thoroughly;
4. leave the solution for 12 hours;
5. add a liter of water and stir again.

Now we can start the process of applying liquid wallpaper. Usually a spatula is used for this purpose. Apply liquid wallpaper with a spatula in a layer 3-5 mm thick. We level the applied material on the ceiling with a plastic float. If desired, after 5 hours, you can walk on the applied material with a textured roller. After that, the ceiling is dried for 48 hours. During this time, you can not touch it.

If the finish is applied in places:

• with high traffic (in the hallway),
• in places with the possibility of contamination (in the kitchen),
• or in places with high humidity (in the bathroom)

Then liquid wallpaper can be covered with one or more layers of acrylic varnish on top. Each layer after application should dry for one hour and only then the next one is applied.

Interior design options

The technology of applying the material allows you to create images and even panels. To make a beautiful ceiling design with liquid wallpaper, you need to perform the following decoration technique:

1. Draw a layout on the ceiling with a pencil;
2. Apply wallpaper with a layer of 1.5–2 mm, protruding 1–2 mm beyond the contour;
3. To highlight the boundaries of the pattern, use a spatula to shift the mass in the opposite direction;
4. Wait until the mass dries;
5. Step back from the dried layer 2 mm and apply another color in a thin strip. Move the new layer to the old one to highlight the border;
6. On the surface, you can use beads, silver threads and other decorative details for decoration.

Using the same technology, a three-dimensional pattern is also created, with the difference that from the mass it is necessary to form a relief that protrudes from the surface. With a mixture of wallpaper, you can work like with plasticine - sculpt any shape. For convenience, it is better to paste over the outer contour with paper tape. It is not necessary to smooth down the material during the drawing process, then you will get a three-dimensional composition close to the bas-relief. You can mark the borders of the colors on the coating with a spatula, gently pushing the grooves. The remaining background after the pattern has dried is processed with a continuous layer of a different color.

In the photo you can see options for ornaments and patterns and other images and illustrations that are easy to apply with your own hands. Well combined liquid wallpaper with photo wallpaper.

Gallery of liquid wallpaper on the ceiling:

In the kitchen

If you decide to apply liquid wallpaper to the kitchen ceiling, you need to cover it with acrylic varnish on top to increase the moisture resistance and dirt resistance of the coating. Acrylic lacquer strengthens the ceiling finish, forming a hard, vapor-permeable, moisture-resistant coating that will stably endure mechanical cleaning and cleaning with detergents. Lacquer can be applied in two ways:

1. added to the mixture during the last stirring;
2. applied to a dry surface.

The consumption of varnish is as follows:

• when applied in one layer - 1 l. for 20 sq.m.;
• when applied in 2 layers - 1 l. for 4 sq.m.

Kitchen gallery:

Liquid wallpaper is a finishing material that combines the advantages of conventional roll wallpaper and plaster. With the help of liquid wallpaper, you can not only create different textures, but also hide minor defects in the ceiling without laborious plastering and puttying.

Types of liquid wallpaper

This finishing material is notable for its versatility: liquid wallpaper looks great on walls and ceilings, while it goes well with other types of decor. Wallpaper can be applied to any base, including curved elements, while the coating is uniform and seamless.

Liquid wallpaper is a mixture of cellulose or textile fibers with various additives. In stores, they are presented in the form of a dry composition, which is diluted with water before use, or a ready-made solution. The application technology is similar to plastering, for this feature liquid wallpaper is sometimes called silk plaster.

Liquid wallpaper are:

• smooth or embossed, depending on the size of the fibers;
• colored or white - they can be tinted to the desired shade;
• homogeneous or with additives that give a certain texture;
• silk, cotton, cellulose or mixed.

The size of the fibers in the composition of the mixture affects the texture of the finished coating: the more pronounced the fibers, the more rough the finished coating. Also, a relief surface can be achieved using the application technology - a wet layer of wallpaper is rolled with a texture roller, which gives it a certain pattern.

The choice of shades of liquid wallpaper is quite wide, you can easily find a color that suits almost any interior. It should be remembered that after application they will be a couple of tones darker than in dry form. If you can’t choose a shade, you can use a white composition in combination with any water-soluble color scheme.

Various additives in the composition of the wallpaper allow you to give the finished coating an original look. Inclusions of stone chips or metallic sequins, silk and cotton threads, cellulose fibers of various sizes create completely different effects.

Prices for liquid wallpaper

liquid wallpaper

Thanks to this, you can choose a composition for any style of decoration, from strict classics to modern.

Not only the appearance depends on the material from which the mixture for wallpaper is made. The basis of liquid wallpaper affects the durability and performance properties. The price of wallpaper also depends on the base material.

Cellulosic formulations

The most budgetary type of liquid wallpaper, the low price of mixtures is due to cheap raw materials. In addition to cellulose fibers, their composition includes adhesive components and plasticizers, dyes, and in some cases decorative additives. Cellulose itself has adhesive properties, so this type of wallpaper has excellent adhesion to any surface.

Cellulosic compositions are not highly resistant to ultraviolet radiation, so they are best used in small rooms with moderate temperature and lighting, for example, in a corridor.

Cotton compounds

The basis of such liquid wallpaper is crushed cotton fibers, due to which it is possible to obtain a soft structure with a matte sheen. Cotton is an environmentally friendly material with a high degree of heat and sound insulation, so cotton liquid wallpaper is often used in a nursery or bedroom.

Silk compositions

The most expensive type of liquid wallpaper, they contain natural silk fibers, shiny and durable, which determines the durability and decent appearance. Silk wallpapers practically do not fade, they can be used in rooms with panoramic windows and bright daylight. With the help of decorative additives, silk wallpapers are given different textures, from the effect of a fabric finish to marble imitation.

Mixed lineups

These mixtures contain cellulose and fabric fibers in various proportions, which makes it possible to obtain a finish with high decorative properties for little money. The price of such wallpapers depends on the percentage of silk or cotton fibers in them, as well as decorative additives.

Note! You can independently give any liquid wallpaper a decorative effect by adding additional components to them. Flocks (crushed mineral additives) and glitters (glitters made of metal or mica) will give even ordinary compositions a unique look.

Liquid wallpaper additives - flocks and glitters

Advantages and disadvantages of liquid wallpaper

Before making a choice in favor of liquid wallpaper, you should consider their features, advantages and disadvantages. This will help to avoid disappointment during further operation.

Advantages of liquid wallpaper on the ceiling:

• environmentally friendly material, does not interfere with moisture and air exchange;
• smooth seamless coating that hides defects and cracks;
• no need for complex surface preparation;
• lack of folds, creases in the corners and on uneven surfaces;
• the ability to achieve with the help of color and decorative additives almost any shade and effect, as well as create a decorative painting;
• the possibility of obtaining various textures, from smooth to embossed.

In addition, if a section of wallpaper is damaged, it can be carefully repaired.

• a rather expensive type of finish, 2-5 times more expensive than ordinary wallpaper;
• does not have moisture resistance, peels off when wet;
• cheap cellulose formulations fade and lose their appearance over time;
• require certain skills for application.

The disadvantages of liquid wallpaper are fully compensated by the right choice, application and operation. To extend the life of the finish, it is recommended to choose compositions with a silk or cotton content of at least 30-40%, and moisture resistance can be increased by covering them with acrylic water-repellent varnish. To properly apply the composition to the ceiling, you need to follow the recommendations of the wallpaper manufacturer and the finishing technology.

Prices for stretch ceilings

stretch ceiling

The technology of applying liquid wallpaper to the ceiling

The process of finishing the ceiling with liquid wallpaper can be divided into two stages:

• ceiling preparation;
• application of the prepared mixture.

Special attention should be paid to the preparation of the ceiling - the adhesion of the wallpaper mixture and the durability of the finish depend on this.

Ceiling preparation

Preparatory work largely depends on the presence and type of old finish. The easiest way is when it comes to a new building with a rough finish - in this case, only a thorough priming of the surface is required. If there is a layer or on the ceiling, they must be removed. Step-by-step instructions for preparing a ceiling with different types of old coatings for liquid wallpaper are given in table 1.

Table 1. Preparation of the ceiling for liquid wallpaper.

Video - Preparing the ceiling for liquid wallpaper

Note! Work on the removal of old coatings is often associated with a large amount of dust and dirt, so it is better to take furniture and household items out of the room or carefully cover them with plastic wrap.

Calculation of the required number of wallpapers

Manufacturers of liquid wallpaper, as a rule, indicate on the packaging the area to be covered based on the coating thickness of 1-1.5 mm. For a standard package weighing 1 kg, this figure is usually 3-6 m 2 (depending on the texture). If there are minor damages or irregularities on the ceiling, the wallpaper layer in them may turn out to be slightly larger, this must be taken into account when buying.

To calculate the number of bags of dry mix, you need to divide the area of ​​\u200b\u200bthe room by the minimum covered area specified by the manufacturer. For example, for a room of 20 m 2 and a dry mix with a consumption of 1 kg per 3-4 m 2, you need to divide 20 by 3. The result will be 6.6 packages, this amount must be rounded up to a larger integer, that is, up to 7.

It is not worth saving and calculating at the minimum consumption - wallpapers in different batches may differ slightly in shade, so it will be difficult to buy exactly the same ones. In addition, if during the work you do not have enough material, a noticeable joint will remain on the ceiling.

Note! If you notice a difference in shade in different packages, mix the dry mix in a separate container. You can dilute it with water both immediately and as needed.

Applying liquid wallpaper to the ceiling

After preparing the ceiling and buying the mixture, you can start finishing. The technology and step-by-step instructions for applying liquid wallpaper are given in table 2.

Table 2. Finishing the ceiling with liquid wallpaper - step by step instructions.

Master Class. How to make liquid wallpaper with your own hands

Step 3. Pour paper into a bucket, pour 1.25 liters of water

Step 4. Leave for about an hour for "sourdough"

Drill prices

Note! The higher the brand of gypsum, the faster the wallpaper sets.

Step 11. It is better to use an iron spatula (here - 20 cm, just for example)

Video - Applying liquid wallpaper to the ceiling

One of the main advantages of wallpapering is that it is not necessary to remove the old coating from the ceiling. But if there is whitewash, then it is advisable to remove it, and then putty the surface twice. Read more details.

With the help of liquid wallpaper, you can not only get a stable and durable coating, but also create amazing decorative effects. Due to this feature, this type of finish is widely used by professional stylists and finishers. Following the above recommendations, you can also realize your ideas and give the ceiling an original and unique look.

In modern apartments, various types of wall, floor and ceiling decoration are used. There are a lot of materials for this kind of work. Traditional whitewashing and paper wallpapers have given way to better types of cladding.

Liquid wallpaper is a modern material that can be applied to walls and ceilings.

The ceiling decoration with liquid wallpaper is gaining more and more popularity.

This coating bears little resemblance to the usual paper, non-woven, fiberglass and other wallpapers. It is more like a decorative stone. On closer inspection, the finish looks like a layer of dense felt.

The material is sold as a dry mix packaged in plastic bags (photo No. 1). The mixture is diluted with water and applied to the surface of walls and ceilings, like ordinary plaster. No rolls, no glue, only the name remains of the wallpaper. The composition of such material without fail includes natural cellulose. Other natural fibers can be added to it: cotton, silk of different colors. The binder is acrylic dispersion, CMC glue. For effect, crumbs of marble, quartz or mica spangles are introduced into the composition.

Figure 1. Liquid wallpaper is sold in bags in the form of a dry mix.

Liquid wallpaper finishes only internal residential and office premises. This environmentally friendly finishing material is ideal for decorating ceilings and walls in children's rooms and bedrooms. It gives the room a special coziness and warmth. Liquid wallpaper is a coating with a fibrous structure. It has excellent soundproofing properties, can improve the acoustic characteristics of the room.

There are several manufacturers of this original finishing material: the domestic company Silk Plaster, which produces 15-20 items, the Turkish company Bayramyx, the French companies Senideco and Fibres de cotex. All products of these companies are of high quality, a wide variety of colors and textures.

Pros and cons of liquid wallpaper

Liquid wallpaper compares favorably with decorative plaster and conventional roll wallpaper:

The palette of liquid wallpaper is not large, but manufacturers are expanding the range of colors more and more.

1. They do not require a lot of space to prepare and use.
2. They do not need to be cut to size and smeared with adhesive.
3. When using them, there are practically no residues.
4. Walls and ceilings do not require careful alignment.
5. Liquid wallpaper does not create dust, has no smell.
6. When dried, the wallpaper does not emit substances harmful to people and pets.
7. They are applied to any vertical or horizontal surface without a single joint.
8. The material fills all the bumps and gaps between the ceiling and the wall.
9. The finished mixture is very plastic, does not crack after laying.
10. Liquid wallpaper coating breathes, creates additional sound insulation and thermal protection.
11. Unlike vinyl wallpaper, liquid wallpaper does not create a greenhouse effect.
12. The finished coating of walls and ceilings does not attract dust and odors.
13. When burning, the coating does not emit any toxic gases.
14. Damaged places are very simply repaired, leaving no visible traces of repair.
15. The service life of the coating without changing its color and other properties is 10 years or more.
16. The ready-to-use composition can be stored in a hermetically sealed plastic container for several months.
17. With this material, you can create various patterns and applications on the ceiling.

The disadvantages of this material are:

1. High price. The most expensive are silk wallpapers. Cellulosic ones are cheaper.
2. The choice of colors is still small.
3. The coating of liquid wallpaper is not highly water resistant, they cannot be washed.

Preparatory work

Liquid wallpaper is applied to a prepared, clean surface.

Liquid wallpaper can be applied on surfaces made of OSB, brick, cement, drywall, metal, wood, clay. On any of these surfaces, they hold perfectly and do not peel off. Surface preparation is reduced to the achievement of the following indicators:

1. The ceiling must not have separating sections.
2. The surface of the ceiling should not actively absorb moisture.

To prepare and apply wallpaper, you will need a basin, wallpaper spatula and water.

1. From the surface of the ceiling, remove the remains of fallen plaster, old wallpaper, putty.
2. Fill large gaps. To do this, you can use both a special putty and a small amount of diluted liquid wallpaper.
3. Prime the ceiling surface. The primer is better to choose a colorless deep penetration. You can use a white primer. It is recommended to dilute the finished primer concentrate with a triple amount of water. Primer Ceresit CT17 is not suitable, because after a while it can cause unpleasant yellow spots on the wallpaper. White water-based paint can be used as a primer. If the ceiling was whitewashed with chalk, then the primer can be done independently. Its composition: slaked lime - 3 kg; laundry soap - 200 g; drying oil - 100 g.
4. If there are fittings, corners and other metal objects on the ceiling, they must be painted over with PF enamel, latex or oil paint.
5. Roughen the ceiling by applying a primer containing quartz dust. You can use a regular primer by adding fine sand to it.
6. If the ceiling is covered with oil paint or enamel, then they do not need to be removed. It is enough to apply a primer on them.

Preparation of liquid wallpaper

Preparation of wallpaper: the mixture is poured into a basin and diluted with clean water at 20-30 ° C.

1. Packets with dry mix and fillers should be shaken vigorously several times. This will help to avoid the appearance of lumps in the working mixture.
2. Prepare a container for diluting the composition. You can stir the wallpaper in a basin, bath, bucket. To dilute a package of dry mix, a container with a volume of about 8 liters is required. Practice shows that it is better to use a round container with a diameter of 40-60 cm and a depth of up to 25-30 cm for these purposes. After work, the dishes are easy to clean, so even kitchen utensils can be used.
3. Water must be clean, its temperature is 20-30 degrees. The temperature itself does not affect the quality of the working composition, but it is more pleasant to work with warm water.
4. The contents of the package are poured into the container.
5. About 5 liters of clean drinking water at a comfortable temperature is poured.
6. The mixture is thoroughly mixed by hand until a homogeneous consistency, reminiscent of heavy cream. Various stirrers and mixers are not recommended. If necessary, water is added in small portions.
7. Lumps from the solution must be removed immediately.
8. Let the solution soak for 20-30 minutes.
9. If decorative additives are included in liquid wallpaper, they should be poured in front of all other components.

It should be remembered that a mixture that is too liquid will drain from the ceiling, and a composition that is too thick is difficult to apply to the surface.

Coating the ceiling

The finished mixture should be homogeneous, without lumps.

The working mixture is applied to the surface of the ceiling with a Plexiglas spatula. Sometimes it is included in the kit along with the dry mix. You can use a stainless steel tool. It is recommended to take a position so that the ceiling level is as close to eye level as possible. It's better to be on the table. If the ceilings are high, then you will have to use a stable ladder.

The spatula must be held so that a small angle forms between its plane and the ceiling (photo No. 2). Do not press too hard on the spatula, as is done when applying plaster or putty. The mass should not be compressed. It is better if it remains loose, it will form a certain relief on the surface of the ceiling.

The process of applying liquid wallpaper resembles spreading caviar on bread. With strong pressure on the spatula, the texture is lost, with insufficient pressure, material consumption increases. The skill is acquired very quickly. With the correct application of the finished working mixture, the layer thickness should be only 1-2 mm. A package of dry composition is enough for 4 sq.m of area. Corners and irregularities slightly increase material consumption.

After covering the entire surface of the ceilings with wallpaper, you need to look at your work from the side. There should be no sagging and bumps, the original color of the ceiling should not show through the coating. If defects are found, they must be corrected immediately. This is done easily and simply until the mixture has dried.

To prevent the formation of visible joints, the mixture must be applied to the entire surface without stopping. The surface covered with liquid wallpaper must be allowed to dry naturally. This usually takes 24-48 hours. You can open windows slightly so that excess moisture evaporates faster. Liquid wallpaper goes well with other finishing materials. This allows you to create various figures, panels, reliefs on the ceiling (photo No. 3).

Liquid wallpaper protection

The wallpaper is covered with acrylic varnish, thus protecting it from moisture and absorbing odors.

Liquid wallpaper has a low degree of moisture resistance, so it is better to protect the finished coating from moisture vapor on it. Acrylic lacquer is ideal for this. It does not contain harmful substances, is an environmentally friendly composition. After the varnish dries, a waterproof coating is formed, which strengthens the material and allows wet cleaning.

Acrylic varnish is recommended to be used even before applying liquid wallpaper to the ceiling. It can be added to the dry mix when mixing the working solution. After the coating has dried, a final thin layer of varnish is applied to it. But all these procedures are not mandatory. With proper use, the varnish consumption is approximately the following: with one-stage application, 1 liter of varnish is enough for 18-20 sq.m, when applied in 2 stages - for 4 sq.m.

Figure 3. Using liquid wallpaper, you can create any pattern or texture.

1. All work is carried out at a room temperature of at least +10 degrees.
2. The room must be well ventilated.
3. The material can be removed from the surface, mixed and reapplied up to 4 times.
4. To change the color, coloring pigments are added to the solution.
5. The liquid wallpaper coating applied to the ceiling can be repaired. When repairing, the damaged part is moistened. This can be done using a special spray gun. Soaked wallpaper with a spatula or other similar tool is removed from the surface and collected in a clean container. The bare section of the ceiling is treated with a primer. The removed wallpaper is soaked, mixed and applied to the repair site. After drying, it becomes completely invisible.
6. If the ceiling has significant irregularities, drywall may be the best material for leveling it.

To create a pattern on the ceiling, proceed as follows:

1. The desired drawing is applied with a pencil.
2. The finished mixture is applied in a thin layer, slightly going beyond the markup of the pattern.
3. With a small spatula, the material is shifted to the borders of the pattern.
4. After the wallpaper layer has dried, the next color is applied, preventing them from mixing.
5. Separate contours, if desired, can be marked with a marker, beads, sparkles and other decorative elements.

Liquid wallpaper is an excellent finishing material for walls and ceilings. Preparation of the working composition and its application to the surface are not particularly difficult. This work can be done by a person who does not have special training. With the help of such material, you can create all kinds of ornaments on the ceiling and even whole paintings, and to complete the work you need only desire and patience. Processing ceilings with liquid wallpaper has a great future.

Every year, many new products appear on the construction markets of our country. It seems that no one is surprised by their unusual names - liquid nails, liquid wallpaper, etc. Nevertheless, buyers are interested in their technical characteristics. And this is easily explained: every person wants his house to be comfortable and cozy, and the repairs carried out to be of high quality. This can only be achieved using high-tech modern materials, such as, for example, liquid and customer reviews of this material, we will present you in this article.

What is liquid wallpaper?

This is a powdery multicomponent composition, which outwardly very much resembles decorative plaster. The mixture, as a rule, consists of several components, but more often it is based on cellulose or cotton fibers, dyes, special glue and special additives that improve the decorative possibilities and properties of this material.

Additives are usually wood chips, mica, dry algae, so this material has different textures and colors.

How to apply liquid wallpaper on the ceiling? Photos and customer reviews presented in our review will help you do it right. The composition should be applied in a thin layer. It turns out a seamless, even surface, the thickness of which ranges from 1 to 10 millimeters - matte, soft, very pleasant to the touch. It has a number of interesting features. This coating has a porous structure. This can be considered one of the advantages of the material, since the base of the ceiling is able to "breathe". This type of finish is distinguished by excellent sound and heat insulating properties, therefore, its use in apartment buildings is quite justified.

In addition, the multi-component composition has antistatic properties, which means that dust will not accumulate on the surface of the ceiling. Depending on the manufacturer, the average antistatic level may vary, but it does not fall below 90%. Compared to conventional roll materials, this composition has a higher level of fire safety.

Apply this material with a spatula (or spray gun). We'll talk more about this a little later. The special consistency of the composition allows you to fill all the potholes and cracks, creating a flat and smooth surface.

Where is this finish used?

Liquid wallpaper has many advantages, so they attract increased attention of buyers. Experts believe that they look best in residential areas - in the living room, bedroom, children's room. This is an environmentally friendly material, and its antistatic properties will surely please allergy sufferers.

This composition can be applied in the kitchen, in the bathroom. But in this case, to increase the practicality of the surface, it should be covered with a moisture-resistant varnish.

Types and features of the material

According to consultants of construction supermarkets, today many buyers would like to apply liquid in their apartment. Which is better? To answer this question, you need to know what types of this material are produced today. When purchasing liquid wallpaper, important information should be considered.

wallpaper type

Now liquid wallpapers are made in the form of a mixture, which includes:

To give a more sophisticated look to the material, decorative elements are added to some wallpaper samples - gold or silver threads, sparkles, crumbs of tree bark, mica, seaweed (dry) and other similar materials. As a result, wallpaper can be divided into the following types:

• Wall-paper silk, differing in resistance to an ultraviolet, the big term of operation, excellent decorative qualities.
• Cellulose wallpaper, in which dyed cellulose fibers predominate. In this regard, they burn out faster and are less durable, but have a lower cost.
• - something between the described species.
• Liquid wallpaper on the ceiling for painting, without dyes. This option is attractive in that at any time you can change the color.

Quite a variety of currently produced liquid wallpaper on the ceiling. Their types and features must be considered when buying.

Today, this material is supplied to stores both in finished form and in dry form. In the second case, the mixture is diluted with water to a mushy consistency before application. The proportions are indicated in the instructions attached to each package.

Surface preparation

Now it's time to answer the question of buyers who want to purchase liquid wallpaper on the ceiling: "Do I need to prepare the ceiling?" Yes, it is necessary to do so.

Old wallpaper (if any) is removed with a spray gun and a spatula. If the surface is whitewashed or painted with water-based paint, then this finish can be left.

Large gaps are best filled and sanded. You can use sandpaper for this.

Primer

If your ceiling has previously been covered with rich oil paint, it may show through using a regular primer. Therefore, you will need a waterproof composition, and a primer to carry out in two layers.

Plastic coatings are primed with a solution based on PVA glue. Metal parts are primed with oil paint or light-colored enamel, which will protect the surface from rust.

How to apply liquid wallpaper on the ceiling with your own hands?

The work is not too difficult, but requires accuracy. Only in this case you will be able to correctly apply liquid wallpaper to the ceiling. Photos and reviews of those who have already carried out this procedure will help you do the job correctly.

The solution is thrown onto the ceiling, and after that it is carefully leveled with a roller, trowel, or grater. Textured finish is performed using a relief roller. The drawing can be rolled after seven hours. Periodically, the working roller is wetted with water.

You can apply the composition with a spray gun. First, a layer of about 1.5 millimeters is applied to the entire surface of the ceiling. When it is completely dry, a layer of such density is applied as needed.

How to apply liquid wallpaper on a plywood ceiling? Similarly: first, the seams between the sheets are putty. Then the entire surface is treated with a liquid primer. When it dries, you can apply the main composition. We hope that now it is clear to you how to apply liquid wallpaper to the ceiling. As you can see, nothing complicated.

Features of care

This type of finish needs special care. It is impossible to wash the surfaces which are not protected by a moisture resistant varnish. It is not recommended to wash the usual composition, it is better to vacuum it periodically.

If a small fragment has broken off the surface, then it can be easily restored. To do this, dilute a little of the remaining composition and fill the defect with it.

High-quality liquid wallpaper will serve you for at least eight years.

Popular wallpaper companies

Today, many companies produce liquid wallpaper on the ceiling. Many manufacturers receive reviews with photos about this material. Today, such compositions are produced not only abroad, they are also made in our country. We will introduce you the most popular companies.

Senideco- wallpapers of French production. Silk liquid wallpaper of the company is presented in more than one hundred and fifty shades.

Cotex- are also produced in France, sold as separate components. This allows you to choose the right shade and adhesive base yourself.

silk coat- wallpapers made in Turkey are distinguished by an affordable price, while not inferior in quality to French counterparts.

Bayramix koza- wallpapers based on silk fibers (Turkey) contain acrylic, which acts as a connecting element. In this regard, such wallpapers cannot be applied to an oily surface.

silk plaster– liquid wallpaper (Russia) with excellent performance characteristics, which are as close as possible to the products of French manufacturers. They are, however, much cheaper.

Liquid wallpaper on the ceiling: reviews, disadvantages and advantages

Buyers who have already used this finishing material note both its positive aspects and disadvantages in their reviews. Many people like that this composition is great for uneven surfaces. In addition, it is quite simple to apply it - even a non-professional will cope with this work. No need to measure and carefully cut strips to create the perfect pattern, as with wallpaper rolls.

The disadvantages of buyers include the inability to wash the surface, which excludes the use of wallpaper over the desktop in the kitchen. In addition, there is a long period of complete drying of the composition. There is an opinion that the cost of wallpaper is a bit overpriced.

Today we have presented you a very high quality material - liquid wallpaper on the ceiling. Photos and customer reviews will help you choose the right composition and create an interesting interior in your home.

The construction industry is developing quite rapidly, as a result of which new finishing materials appear. One of the latest was liquid wallpaper on the ceiling, with which you can make the interior of your home even more interesting and attractive. In this article, you will learn about all the nuances of both the material itself and the DIY repair process.

Material Advantages

The technology of liquid wallpaper on the ceiling is gaining popularity faster and faster due to its following advantages.

• The main difference between liquid wallpaper and similar materials is the naturalness of all the constituent components. Due to this, they do not emit toxic gases during installation and drying.
• There are no synthetic fillers in this material, as a result of which liquid wallpaper will not absorb dust. They also have antistatic properties.
• The soundproofing qualities possessed by liquid wallpaper will be very relevant in multi-storey buildings, where there are a lot of extraneous sounds. The material has a microporous structure through which steam can pass.
• In addition, liquid wallpaper for the ceiling is very easy to maintain and does not require the use of additional funds.

Types of liquid wallpaper

The range of liquid wallpaper on the ceiling is quite diverse. They can be divided into three types.

• Silk-cellulose. The best option when choosing between price and quality. The composition of such ceiling liquid wallpaper contains both cellulose and silk fibers. They are resistant to sunlight and keep their original appearance for a long time. Good for bedroom or kids room.
• Cellulosic. Such liquid wallpaper for the ceiling is the most affordable. However, given such a low cost, one should not expect high decorative qualities. But even if you find more or less decent-looking wallpapers, they will not last so long. Considering that they will fade under the influence of ultraviolet radiation, a corridor or a bathroom will become a more suitable place for them.
• Silk. This type of liquid ceiling wallpaper is the most expensive. The high price is due to the fact that they are made entirely of silk. Thanks to this, they have good decorative qualities and will remain in their original form for many years. Also, they are not afraid of ultraviolet radiation, so they do not fade and do not change color.

The process of applying liquid wallpaper

Before you start applying liquid wallpaper to the ceiling, you should prepare the following tools and materials:

• drill with a special nozzle;
• rollers of different sizes;
• hard brush;
• putty knife;
• primer.

To better understand the method of applying the material, first you should find the difference between simple and liquid wallpaper.

When you have to glue paper wallpapers, a lot of time is spent on marking the rolls, joining the pattern, careful cutting and much more. The technology of finishing the ceiling with liquid wallpaper does not require all this. Their application is much simpler: all that needs to be done is a panel. Also, with the help of liquid wallpaper, you can hide various defects in the ceiling. But in order for everything to work out in the best possible way, before gluing such wallpaper on the ceiling, you need to conduct high-quality preparation.

The whole process of applying liquid wallpaper with your own hands will consist of the following steps:

• preparation;
• breeding wallpaper;
• ceiling covering.

Now let's take a closer look at each of them.

Preparatory work

First you need to get rid of the previous ceiling covering. Depending on the type of old surface, different tools should be used. You can remove oil paint or enamel with a special remover. If there was previously an acrylic or water-based coating, it is not necessary to completely remove it. Using a spatula or a metal brush, we remove looseness and clean the exfoliating areas.

In the presence of defects in the ceiling, such as cracks and cracks, they should be puttied. If the irregularities are of considerable size, it is worth thinking about leveling the ceiling with drywall.

When buying liquid wallpaper for the ceiling in a store, you need to know that they are sold in different forms.

• Liquid wallpaper is sold in plastic buckets, which can be immediately applied to the surface without additional kneading. They are already tinted and have a paste consistency.
• In the form of a dry free-flowing mixture that must be mixed with water according to the instructions provided by the manufacturer. They go on sale with the addition of dyes and fillers to create texture.
• In the form of a dry mix, but the purchase of additives and dyes is made separately.

The dry mixture should be kneaded as follows.

• Pour the required amount of water into a plastic container.
• Pour the mixture into the water and stir thoroughly. Now leave the solution for 12 hours to let it swell.
• When the specified time has passed, add another liter of water to the mixture. The material is ready.

Applying to the ceiling

There are two ways to apply material to the ceiling:

• manually;
• mechanically.

The manual method consists in applying liquid wallpaper to the ceiling with a roller, spatula or stiff brush. The layer is applied with a thickness of 3-5 mm. After processing with a spatula, the ceiling is smooth. Texture can be applied after about 5 hours with a texture roller moistened with water.

The use of a spray gun will significantly speed up the work. The texture is also applied with a roller after application with a gun.

After that, the surface is dried for two days. During this time, the ceiling should not be affected by any external factors.

If liquid wallpaper is applied in the bathroom, then after drying, they should be covered in three layers with acrylic varnish. Each layer should dry for at least an hour. For more information, we recommend watching a video where professionals work on the ceiling.

The technology of applying liquid wallpaper allows you to create unusual panels with your own hands that will decorate any living room. You can see how it is possible to diversify the interior of your own home in the photo.

To create a pattern on your ceiling, you must follow the following instructions.

• On the ceiling we create a layout of the drawing with a simple pencil.
• We apply liquid wallpaper on the surface with a layer of 1.5–2 mm, while we protrude beyond the outline of the pattern by 1–2 mm.
• To create the borders of the pattern, we shift the material in the opposite direction with a small spatula.
• Let the material dry. A household hair dryer can help speed up the drying process.
• Now we retreat from the dried liquid wallpaper 2 mm and apply the following look with a thin strip. Shift the applied layer to the previous one to create a clear border. At the same time, we make sure that different types do not mix.
• If necessary, a marker can be used to highlight small elements. It is also allowed to glue beads, threads, sparkles and other decorative details.

When creating a picture, you need to take into account that it is silk liquid wallpaper that will do the best for this purpose. And do not forget that all elements of the pattern should be applied in a layer of the same thickness.

When buying liquid wallpaper for the ceiling in the store, do not try to save much. Pay attention to well-known manufacturers who will not spoil their reputation with low-quality goods. The choice of material will determine how quickly the ceiling finish with liquid wallpaper will lose its appearance, and replacement will be required.