Switches, dimmers for cabinet lighting. Choosing the lighting of the closet Do-it-yourself lighting in the closet

Most often, when purchasing new furniture, people do not assume that they will need to make internal lighting, which creates the convenience of using the cabinet, since furniture cabinets are usually installed in poorly lit places. To search for any thing in the closet, you need to approach the shelves, look closely and shift things, or turn on the lighting in the room. To get rid of such inconveniences, it is recommended to have a backlight in the closet, which is easy to install on your own, after reading the recommendations for its selection and proper installation.

You can stop at the classic version of lighting and mount the lamps by connecting them to the switch. Then, whenever you need to open the closet and take a thing, you will need to turn on the light manually, and then remember to turn it off. This procedure is very inconvenient and time consuming.

The most acceptable option for lighting a built-in wardrobe is automatic lighting. Its action can be described as follows: when the cabinet is opened, the lighting turns on, and when it is closed, it turns off.

Backlight selection

By choosing the right lighting option, they get comfortable and reliable lighting in any place.

Halogen lamps

One type of lighting for furniture cabinets is lighting with the help. In making this choice, the following factors must be taken into account:

• The bulb of a halogen lamp can heat up to 500 degrees, so you need to take all measures to comply with fire safety.
• Such lamps require special handling, the surface of the bulb should not be touched with hands, as stains of fat are formed, which, when heated, will render the lamp unusable.
• Possible voltage drops can have a negative effect on the lamps, so it will be required. Some types of halogen lamps are made to work only from.
• With the constant operation of halogen lamps, they will not last long, especially if the lighting mode is dynamic, that is, with.

LED lights

The backlight can also be made alternatively, using LEDs. Using such lighting, you can illuminate the closet space, as well as diversify and refresh the interior of the room where the furniture cabinets are located. Most often, LED lighting is used to illuminate cabinets, walls, bedside tables and the interior of the kitchen.

LED backlight includes several parts, which are united by one loop. This type of lighting will make it possible to create improved light dynamics, change the intensity of the light flux and color. When comparing the two considered cabinet lighting options, LED lighting will cost more. However, its significant price is not a hindrance for buyers, since LED backlighting reduces electrical energy consumption and justifies itself during use.

Advantages of LED lighting:

• The resistance of the tape to mechanical damage, vibration and shock resistance, which is important for using it in a closet, as it is possible to hook the tape with a hanger or clothes.
• Compact dimensions.
• Long service life. A high-quality tape with LEDs, with proper operation with a stabilizer, can last for many years with many hours of daily work.
• Small consumption of electrical energy, therefore, saving money.
• Multi-colored palette of ribbon illumination. LEDs can emit different colors across the entire light spectrum. The color can be matched to the interior of any room. On sale there are ultraviolet and infrared LEDs that are combined with modern high-tech interiors.
• Bright powerful light output.
• Opportunity .
• No warm-up time is required, the LEDs immediately begin to shine at full load.
• Low cost. Even the highest quality LED strip designs have an affordable price for buyers.
• There are LED strips with different angles of light direction.
• LED lighting is environmentally friendly, as its design does not contain materials and substances harmful to humans.
• The tape is safe to use, so the backlight can be mounted even in children's rooms.
• At any temperature, the LED strip works normally.

When using a multi-colored tape to illuminate cabinets, it must be borne in mind that four leads leave the tape, three of which are in colors, and the fourth to the negative power pole.

The procedure for organizing lighting

Internal lighting in the cabinet can be organized with special lamps equipped with an ultrasonic sensor. To trigger the ultrasonic version of the sensor, it is necessary for a person to open the cabinet door; when people are near the cabinet, the lighting will not turn on.

The lighting in the cabinet can be installed independently. To do this, a pre-installation scheme is drawn up. Most often, for the implementation of work on lighting the cabinet, there is no supply cable nearby, which can be removed in several ways:

• Open method (on walls and ceiling).
• Closed method (in the cable channel).

Installing the backlight in a closed way

• cut to required length.
• Fix it to the surface of the wall or ceiling with dowels and self-tapping screws.
• Place the cable in the cable duct and close the cover.
• Disconnect the power supply.
• The backlight in the cabinet is connected to the power cable by connecting the phase and zero wires.
• Install the lamps in the fixtures without covering them with a diffuser.
• Apply voltage to the power cable.
• Check the operation of the backlight by opening and closing the cabinet door.
• During normal operation of the backlight, install ceiling lamps on the fixtures that scatter light.

Installation of halogen lamps

Illumination in the cabinet using halogen lamps is used quite often. The distribution network has ready-made sets of several lamps for lighting cabinets.

The backlight kit usually includes:

• Transformer.
• Lamps.
• Wiring.
• Switch.
• Connectors.

Before installing the fixtures, you need to study the scheme:

When choosing a transformer, it is necessary to take into account the total lighting power and input voltage.

The lighting in the cabinet is carried out in compliance with the installation rules:

• The power transformer is selected more than the power of the lamps by 5%.
• The output voltage of the transformer must be 12 V.
• The voltage of the lamps must correspond to the output of the transformer.
• The length of the conductors for connection to the lamps is not made more than 3 meters. Longer wire lengths reduce power supply.
• The transformer must be placed away from the heating system, heaters, as it heats up during its operation.

Connection order

• To cut out a place for halogen lamps, you must use a crown cutter.
• First, drill a hole 10 mm deep, then turn the cutter over and continue drilling. Otherwise, a piece of chipboard may be pulled out of the cabinet wall.
• On a flat surface such as the floor, connect the entire backlight circuit to test if it works.
• Everything and connect to the transformer.
• To use terminal blocks.

Installation of LED lighting

Light-emitting diodes can be represented as special semiconductors through which an electric current passes, and light energy is generated. LEDs come in a variety of chemical compositions, which determine the brightness of the light emitted by them. The lighting in the cabinet is not always carried out immediately from the household network, since the mains supply is unstable, as a result of which the LED strip may overheat and fail. To solve this issue, a voltage stabilizer is used.

It is a bar (tape) made of plastic material. One side of the tape has an adhesive backing that can be used to stick it to a ceiling, wall or other surface. On the other side there are LEDs in sections of 5 cm. There is a marking on the tape for making a cut. The LEDs on the tape are connected by a single circuit.

LED strip is usually sold in the distribution network by the footage, or in wound coils of 5 meters. One coil is enough to illuminate one cabinet. The average number of LEDs per meter is usually 30 pieces.

You will also need:

• Terminal blocks.
• Connector.
• Fork with cord.

Mounting diagram

Mounting order

• Connect the cord with in series, then connect the power supply to the controller. In this case, we must not forget that two thin short power wires depart from the controller. To make the connection reliable, on these wires, clean the insulation by 1 cm, tin it with solder.
• The wire is pulled in cable channels fixed on liquid nails.
• Connect the LED strip to the controller with 4 wires, observing their color. Connect to the circuit. or using terminal blocks.
• At this installation step, it is recommended to check the operation of the backlight.
• Stick the tape in the closet and attach it to.
• If lighting in the cabinet is planned for all shelves, then you need to drill holes in the corners of the cabinet for wiring wires to the top of the cabinet.

Closet lighting

Closet lighting performs decorative and functional tasks. With the decorative part, everything is clear - this is the decoration of the wardrobe. But the functional lighting of the closet compartment helps to look for the right things inside the closet, and also illuminates the area in front of the mirror.

But, as they say, there is never too much light. The more different lamps and lamps you have, the more interesting the design of your room and wardrobe.

Watch the video review of the lamps of the future for your furniture from Domus Line

There are many types furniture lamps, which differ in the type of installation, the type of lamps used, design. Some of the many existing furniture fixtures are shown in the photo below.

Halogen lamps

The most widespread illumination is halogen lamps. On sale you can find different in design and functionality halogen lamps.

A row of downward-pointing halogen spotlights built into the canopy of the closet make a spectacular impression.

Inside the closet, halogen lamps illuminate the contents of its sections. Particularly convenient is the automatic system with a motion sensor, which turns on the light inside when the door is opened and turns it off when it is closed.

Quite appropriate spot halogen lamps for illumination when mounted in the visor of the dressing room.

Below are photo of sliding wardrobes with lighting, which give an answer on how to make the backlight of the built-in wardrobe. A canopy with a depth of 100-200 mm is made, in which both mortise and overhead lamps are installed.

LED lights

LED downlight is a new, high-tech product that is increasingly used in the creation of furniture and interiors.

Examples of LED lamps

Set of 3 round LED lights

Each lamp consists of 19 diodes, power 1.14 W. In total, the entire set of power consumption is 3.42 watts.

LED bar

Faro LED Light

LED lamp FARO is a self-contained luminaire with a lightweight body, inside of which there are three bright LEDs.

The luminaire is purposefully designed to illuminate the contents of chipboard drawers in sliding wardrobes. The LEDs inside the luminaire are placed in such a way as to illuminate the contents of the drawers.

Thanks to a special sensor and an electronic chip, when the drawer is pulled out, the lamp automatically turns on. The lamp turns off automatically after 15 seconds.

The lamp is designed for 20,000 lighting cycles of 15 seconds using AAA batteries. The luminaire is easy to install, it is enough to remove the protective film from the adhesive backing and attach it to the back wall of the drawer in the closet.

Fluorescent lamps

Fluorescent lamps rarely used to illuminate furniture. You can find compact and linear (tubular) lamps.

The advantage of such lamps is low power consumption and high efficiency, the minus is low impact resistance, bulkiness and not too sophisticated appearance.

An option for using such a backlight is horizontal placement above a mirror.

Often a fluorescent lamp is used as part of a bar for hanging clothes.

Install fluorescent lamps and to illuminate the drawers in the closet. This type of luminaire with a fluorescent lamp and a protective screen made of matte thermoplastic, a switch, is triggered by contact with the facade. It is mounted inside drawers, it is also possible inside a sliding wardrobe.

LED Strip Light

LED Strip Light- this is a flexible board with contacts, on which LEDs are located one after another at a certain distance.

What can be illuminated with LED strip in the closet

Closet door lighting

This will require dip led side light strip. With the help of this tape, contour illumination of glass is performed from the inside of the door.

It will look spectacular if a sandblasted pattern is made on the doors of the wardrobe. Dip led strip is a type of LED that looks like a cylinder. The tapes have a reliable protection in silicone, which makes the tape airtight.

In particular, a special profile can be used to illuminate the glass shelves in the cabinet. Thanks to a set of accessories, you can illuminate a shelf of any size and along its entire length.

Contour lighting of the sliding wardrobe with LED strip is also carried out with direct glow strips.

Such illumination is carried out using a special profile, which is mounted in a groove previously made under it in the shelf, a tape is laid in the profile and all this is closed with a matte plug, which ensures the diffusion of light from the LED strip.

LED strips are available in various lengths and configurations. The kit includes a LED strip on a self-adhesive basis, a transformer, a controller, a remote control, an infrared sensor.

Watch the video about the components of the LED strip lighting kit

Recessed furniture lamps

Recessed furniture lamps mounted in a pre-cut hole in the visor of the wardrobe. Mortise lamps can be both halogen and LED, rotary and stationary.

Overhead furniture lamps

Surface-mounted furniture lamp differs in power and size. There are models in the form of long lamps, in the form of spotlights, and there are also options for rod overhead furniture lamps.

The shape of overhead furniture lamps can be square, round, oval, triangular and rectangular.

There is even a variant of the lamp, which is superimposed on the shoulder of the hinge for the door.

Surface-mounted luminaire with switch, mute sensor and motion detector

Such surface lamp Easy to mount with clips and adhesive strips. The motion detector in the luminaire has a range of 2m and is activated when the cabinet or drawer door is opened.

The lamp also has a built-in day-night sensor, which, depending on the time of day, adjusts the intensity of the backlight. Such an overhead lamp can be installed inside the body of the sliding wardrobe, as well as in the drawer of the sliding wardrobe.

Dressing room lighting

Of course, the dressing room due to its size, allows you to organize the storage of things. But, without proper lighting, you just won't find these things.

Don't Neglect Natural Light in Your Dressing Room

It is desirable that there is a window in the dressing room. The window is in the center of the wall and you are sure to find even small dark things.

Rice. 31. Window in the center of the dressing room wall

Glamorous chandelier in the center of the dressing room ceiling

A black glass chandelier above a pouffe or chaise longue allows you not only to create decent lighting for the dressing room, but also an atmosphere of wealth. Additional lighting comes through the windows, plus there is also a table lamp.

In the article, I will describe in detail the advantages and disadvantages of lighting in the closet. I will list the types of this kind of lighting. I'll tell you how to make a backlight with your own hands. I will give step-by-step instructions for installing lighting.

Advantages of wardrobe lighting and disadvantages

The main advantage of using additional lighting in a closet is not only the creation of a comfortable environment, but also the originality of interior decoration. If you use these small bulbs wisely, you can realize any design ideas and make your room simply unique.

Of the shortcomings, it is worth noting the additional consumption of electricity. Although this problem can be easily fixed by using LEDs. They are economical and have a low radiation dose.

Types of lighting

LEDs are more economical than halogen lamps.

To illuminate furniture cabinets, you can use:

• halogen lamps. But they require careful attention. You can not touch the glass bulbs of the lamp with your hands, otherwise they will fail faster. Such lighting does not tolerate voltage drops, so it is important to install a stabilizer. But most importantly, the lamp can heat up to 500 degrees Celsius. Therefore, all fire safety measures must be observed;
• LEDs, which, although more expensive, are more economical in operation. Moreover, they are compact and durable. The level of infrared radiation is minimal. This means that the lamps are harmless to human health and will not heat up, reducing the risk of fire. LEDs are made of heavy-duty materials, so they will last for many years.

LED products according to the type of fastening are divided into:

• mortise, which are installed in a pre-prepared place;
• invoices, which are mounted on the surface of the furniture using self-tapping screws or double-sided tape.

Special attention deserves the LED strip, which is usually used on narrow furniture panels. With its help, you can illuminate drawers and shelves in hard-to-reach places.

Choosing lighting for furniture, first of all, you need to decide on the color of lighting. The most commonly used color is white. Although there are options from red to yellow. It all depends on the design idea.

How to make lighting in the closet with your own hands

The most popular lighting option for is LED strip. Consider its installation in more detail.

The internal lighting of the sliding wardrobe can be additionally equipped with a motion sensor, as well as an ultrasonic sensor. Moreover, in the latter version, the lighting will only work after the cabinet door is opened, and not when people are simply near it.

To assemble the LED circuit and connect it to the power supply, it is recommended:

1. Cut the desired amount of tape at the appropriate location where the scissors dotted line indicates.
2. Prepare the wire of the desired section. For a five-meter tape, you need 1.5 mm. If the tape is longer, you will have to calculate according to the formula. Yes, and the wiring diagram for such an LED will be more complicated. If you sequentially connect all the pieces to each other, individual segments can warm up.
3. Use alcohol to degrease the LED contacts.
4. Clean and tin wires.
5. Solder the red wire of the terminal to the "+" and the blue wire to the "-". If you confuse the light will not light up.
6. Using heat shrink tubing, insulate the solder points. You can replace the heat shrink tube with a glue gun.
7. Guided by the color coding, connect the wires of the LED strip to the power supply.

Getting to the installation of the tape:

1. Measure the required length of tape. And this must be done in special places. Be careful.
2. Where to mount LEDs attach the plastic corner 10*10mm. It will allow you to hide the tape itself and will not spoil the appearance of the cabinet.
3. Wire the cabinet. To do this, in an inconspicuous place you need to make a hole. If each shelf is supposed to be illuminated, an additional hole must be made in the corner so that the cable can be lowered down along the cabinet.
4. Plant cable channels on liquid nails and hide the wire in them.
5. Stick the LED strip on the corner and turn on the power supply. After all, install the limit switches and the backlight is ready.

Having completed the lighting in the closet, you will no longer need to use a floor lamp or a lamp to illuminate the work surface and search for underwear on the shelf. And if you use high-quality devices and do everything according to our instructions, you can enjoy the practicality of opening the door and the functionality of this kind of lighting for a long time.

Switches for lighting furniture and wardrobes according to the method of operation can be divided into:

• mechanical
• non-contact (touch) switches.

Let's look at specific examples of devices for lighting a wardrobe, without focusing on manufacturers, because in general they are similar.

Mechanical switches

Mechanical switches- here mechanical action is necessary to turn on and off the backlight of the closet.

There are options for swing doors and sliding doors.

Touch switches (non-contact)

Sensor switch consists of three parts: a sensing element, a semiconductor circuit for analysis and control, a switching power part.

When the object of influence approaches the zone of control of the sensitive element, a certain signal is generated, which turns into an electrical signal of sufficient power to trigger the switching part. The last part makes or breaks (or both) the DC or AC circuit.

Eg, infrared sensor turns on the lamps connected to it when entering the sensor sensitivity zone (1-1.6 m cm in the figure), and leaves them on until you leave the zone.

Switching off the lamps occurs 10-180 seconds after leaving the sensor's sensitivity zone. The sensor can be built into a cabinet canopy, ceiling, wall, or a decorative enclosure such as a lamp housing. In the latter case, the luminaire and sensor form a single module.

Rice. 4.

In general Sensor switch- This is a semiconductor device that, depending on the position of the object of observation remotely removed from it, controls the state of the external electrical circuit connected to it using a built-in switching element. In the case of household touch switches, the object of observation is a person or his hand.

In furniture and wardrobes, touch switches are used, the operation of which is based on three types.

Capacitive switches

Capacitive switches- do not require mandatory pressing of the button. This touch switch works like this. You bring your hand to the so-called active surface of the touch switch (the surface under which the sensitive element is hidden is usually the front side of the switch) at a distance of 40-50 mm, and the device turns on or off the light. Some models require you to at least lightly touch the active surface.

Optical switches

Optical switches- work in both conventional and infrared radiation spectrum. The former work as light sensors, the latter as infrared sensors.

The basis of the second version of the optical switch is the sensitive element - the receiver of thermal radiation. It is a semiconductor device that responds to infrared radiation. To help the sensing element capture this radiation, it is surrounded by a collecting plastic lens, which may be in the form of a hemispherical cap.

There are two main options for infrared sensors for furniture.

The first option is triggered by a wave of the hand, they brought the hand to the sensitive surface at a distance of 2-3 cm from it - the sensor turned on, brought it up again, the sensor turned off.

The second option is triggering as a result of the appearance or disappearance of an obstacle, for example, a sliding wardrobe door from the field of view of the sensor. The sensitive area of ​​the sensor itself can be located both on the side and front surface of the sensor housing, and placed on the wire.

High frequency switches

High frequency switches– volume sensors or sensors of active type. These sensors are based on modern high-frequency sensor technology.

By sending a signal at 5.8 GHz, the sensors register changes in the reflected signal that occur as a result of the slightest movements of people or objects. With any movement, they work almost instantly and regardless of temperature or direction of movement.

Dimmers for furniture

Dimmers- These are devices for adjusting the brightness of the glow of a light source. To adjust the brightness of low-voltage halogen lamps (12 V), that is, those used in furniture, there are special dimmers.

If an induction transformer is used as a power supply, then an R type dimmer is used. When using an electronic impulsive unit with the possibility of dimming, special dimmers are recommended. Control in such dimmers occurs due to the phase difference of the current and voltage at the output of the unit. In this case, the letter designation of the dimmer and transformer is L and C, and the designation of both devices must match.

Lighting is controlled by a button. A short press on the button turns the lamp on or off; a long press changes the brightness.

For the LED strip, special controllers are used that are connected between the power supply and the strip. The brightness is changed by changing the duration of the voltage pulses.

The term "controller" means an electronic device designed to issue control signals to controlled objects. Issuance of control signals is carried out in accordance with the program.

Sliding wardrobe with translucent doors and internal lighting in the interior of the room

Sliding wardrobes for many years have confirmed the convenience and rationality of their use and have taken their rightful place in almost every apartment. However, the depths of the cabinets where clothes are folded or hanging often require additional lighting to find the right thing, or, conversely, without disturbing the peace of the household, highlight only one shelf or section. For this, it is most convenient to use the backlight. In this case, it is necessary to clearly understand the purpose for which it is mounted.

Black and white wardrobe with a figured side shelf with top lighting

Light wardrobe with additional lighting in the interior of the dining-living room

Beautiful unusual lighting for a mirrored corner wardrobe

An interesting idea for lighting each individual area in the dressing room

Before talking about the pros and cons of lighting cabinets, those who want to install it need to understand its necessity. It is clear that the placement of lighting along the outer edge of the furniture will not play any functional role, but will remain a decorative design. There is no need for it even if the depth of the cabinets is small, and all manipulations with things can be done without additional lighting.

Huge wardrobe for a dressing room with additional internal lighting of individual zones

Sliding wardrobe with multi-colored led illuminated shelves for an unusual living room

Among the advantages that the lighting of wardrobes gives, it is worth noting the following:

• does not take up much space;
• creates a kind of color in the room;
• provides convenience when searching for things or placing them on the shelves;
• saves time;
• provides an opportunity to illuminate exactly the area in which things are located, without using other lighting devices.

Large illuminated mirror cabinet for a loft-style bedroom

Another advantage is the ability to independently mount lighting. In addition, you need to take into account that the internal lighting allows you to maintain order in the cabinets and clean up in time: remove the cobwebs, wipe off the dust or detect mold or fungus on the inner surface of the cabinets in time.

Additional lighting for the bedroom at the top of the wall-mounted built-in wardrobe

As for the shortcomings, here we can note the complexity of lighting control.

Types of lighting: pros and cons of options

Halogen lamps for furniture

Battery-powered motion sensor LED lamp for closet

Not all lamps are suitable for interior lighting of furniture. For ease of use, preference is given to two types of fixtures: overhead and built-in. At the same time, halogen and LED lighting devices have become the most popular.

What to pay special attention to when choosing lamps and fixtures

Sliding wardrobe with built-in lighting in the interior of the room

When choosing lighting fixtures, you need to take into account a number of features that will help you choose the “right” one, exactly the one that will decorate the apartment.

1. It is important to take into account the characteristics of the room where they will be installed. If the interior is already decorated, then the lamps and lamps are selected taking into account the existing design in such a way that they organically fit into it.
2. Do not forget about taking into account the area and illumination of the room: luxurious huge chandeliers or cascades of lamps hanging from the ceiling are unacceptable for small rooms: they will visually make the room even smaller. A modest small lamp will look just as ridiculous in a huge room with high ceilings.
3. Particular attention should be paid to the selection of lamps:

• their powers;
• energy saving opportunities;
• brightness;
• color solution.

1. It is important to determine the price of the purchased product by setting a certain “price corridor” within which the lighting fixture will be selected.

A variety of furniture lamps and fixtures for every taste for any interior

When choosing a lamp or lamp, you should proceed from the possibilities of the family budget, rationality, quality and aesthetics.

Convenient lighting of internal shelves using LED technology

What is the peculiarity of the lighting of the kitchen set, and how to apply it in the interior?

Illumination of the kitchen set with LED lamps

Today, various sources are used to illuminate furniture in the kitchen: halogen, fluorescent and LED lamps and LED strip, while the latter is increasingly being preferred.

The tape can be of various sizes and densities, in addition, it is necessary to take into account:

• color of LEDs, presented in a wide palette of shades; in some cases, the brightness can be adjusted;
• if the kitchen furniture is dark tones, the lighting under the bottoms of the hanging shelves and cabinets will emphasize the elegance and refined taste of the interior;
• properly selected lighting will fulfill its immediate functionality and will look great as a decorative design for a kitchen set;
• will bring a certain zest to the design of the room where the kitchen set is installed, the illumination of the top and bottom of the wall cabinets.

Illumination of the work surface using LED strip mounted on hanging cabinets

DIY selection and installation

The main stages of self-installation of LED strip in the room

Before proceeding with the installation of wardrobe lighting, it is necessary, of course, to choose the most appropriate lighting option. Practice shows that the most acceptable sources of lighting for wardrobes are fluorescent and LED lamps or LED strip. They ensure the safety of their use, save energy and are characterized by a slight complexity of installation. But the simplest and most rational way to illuminate furniture is to install an LED strip. In this case, it is necessary to take into account:

• acceptable tape length;
• lighting solution;
• the need to purchase a 12W power supply.

LED strip for lighting furniture

The design of the LED strip, in addition to the indicated advantages, allows you to determine another advantage: there is no need to spoil the surface of the furniture to install it.

Despite the fact that the installation of such a light source does not require serious skills in working with electricity, this does not mean that they are not needed at all. Therefore, if the owner is completely “not friendly” with the technique, it is better to seek help from a specialist.

However, if you have a desire, you can master even very difficult moments, and installing an LED strip is not one.

Approximate scheme for connecting an LED strip to a power source

The tape is mounted as follows.

Installation instructions for LED strip for additional lighting

Advice. To avoid power losses, the length of the wire should not be more than three meters.

Attention! It is worth remembering that the transformer heats up during operation. Therefore, when fixing it, it is necessary to comply with fire safety requirements.

1. In order not to spoil the appearance of the furniture and protect the household from trouble, care must be taken to hide the wires and cables.

The formation of the interior of the apartment with the use of lighting will bring originality to its design, indicate the taste preferences of the owners and their desire to live in comfort and beauty.

Beautiful built-in wardrobe with additional lighting for a romantic bedroom

Unusual wardrobe with photo printing and additional lighting

Video: we light the cabinet with LED strip in an aluminum profile with our own hands