Despite the fact that the world stepped forward and began to invent new types of bathtubs, faithful cast iron does not disappear anywhere. Modern manufacturers have begun to actively produce new versions of cast-iron bathtubs, and most people prefer them. This article is about how to effectively clean a cast iron bathtub so as not to damage the coating and at the same time remove strong popular stains.

Natural and Chemical Cast Iron Bathtub Cleaners

A good cleaner can be one of two types:

• chemical;
• natural.

Every housewife has natural cleaning products in the kitchen; their use is referred to as folk cleaning methods that are well known to today's grandmothers. These include: soda, salt, vinegar, borax, turpentine, lemon juice, dry mustard, ammonia, starch and, of course, laundry soap. All of them are characterized by ecological cleanliness and 100% harmlessness to the human body. With the help of the above described means, you can get an excellent result and, like chemical creams or powders, clean the bath from yellowness, limescale, rust, soap marks.

The use of chemical methods similarly gives a good result, but can harm health (especially for allergy sufferers) or the bath itself. Therefore, it is very important to follow a few rules when buying them:

1. It is worth reading the information about the product, what varieties it is suitable for, carefully study the manufacturer's recommendations.
2. The purchased gel/powder/cream/paste should not be aggressive or contain high levels of chemicals. The purpose of the product is gentle cleansing, disinfection.
3. The tool must be safe for human health. At the same time, you still need to work with rubber gloves, because even a small amount of chemistry can harm with open contact.
4. It is important to pay attention to the smell, it should not be caustic and too harsh, so that you do not have to air the bathroom for an hour.
5. Consider the price. If financial resources are limited, but it is worth buying expensive chemicals once, it is better to initially choose a more suitable option.

Based on personal beliefs and finances, each housewife eventually independently determines the best bath cleaner.

What not to use for cleaning

A cast-iron bathtub is quite durable, which cannot be said about its coating. Baths of the old manufacture were always covered with porous enamel, and modern coatings have a glossy surface and a dense structure. Here the question arises, how to clean the bath so as not to harm any of the varieties of its coatings? To do this, you can not use the following tools and tools:

• abrasive cleaners;
• cleaning products and solutions containing concentrated hydrochloric acid (for example, "Silit" or "Sanitary 2");
• brushes with metal teeth;
• fiberglass sponges;
• blade, knife and similar sharp objects of improvised use.

Not following these rules, the surface of the coating will be destroyed, lose its luster, and become rough to the touch.

Cleaning Tips:

• it is undesirable to leave the bathtub wet, it is better to take a minute of time and wipe it with a dry soft cloth;
• give preference to loyal liquid gels or creamy solutions;
• If you need to rub a heavily soiled area, you can use a washcloth for washing dishes or an old toothbrush.

It is advisable to wash the bath soon after using it, then the dirt will not have time to be absorbed and it can be removed with ordinary soapy water;

Folk cleaning methods

For rust removal

1. With soda. To clean the bath with soda, immediately wet the surface a little, then apply the substance to rusty places, gently rub with a soft, damp sponge. In addition, baking soda is an excellent disinfectant and deodorizer.
2. With borax and vinegar. It is necessary to connect them together in equal quantities, moisten a cloth in the resulting solution, wipe the rusty areas of the bath.
3. With the help of salt and turpentine. Prepare a thick slurry, apply to dirty places. It helps not only to get rid of rust, but also to prevent its reappearance.

To return the original whiteness

1. Vinegar. To clean the bath with vinegar, you need to moisten paper napkins or rags in it, then cover the entire area of ​​\u200b\u200bthe bath with them, leave for half an hour. Vinegar is good at oxidizing and disinfecting.
2. Powdery white. Dilute whiteness with water until a thick porridge is obtained, then apply it to the entire surface. Hold for at least half an hour, then rinse well. This method is even suitable for cleaning an old neglected bath.
3. Toothpaste. It is applied locally to problem areas or around the entire perimeter.

To remove limescale

Than forget about it forever, the following methods will prompt:

1. With the help of ammonia. Apply the solution to problem areas, leave for a while, then rub and rinse if necessary. Ammonia is very easy to use, it is convenient for them to treat the entire surface.
2. With baking soda and dry mustard powder. Connect in a ratio of 1: 3, clean the bath. Will master not only plaque, but also rust. The perfect blend for regular weekly cleansing.
3. With a mixture of vinegar and salt. This method is especially suitable for those housewives who have plaques or stains from hard water on the bathroom.
4. With lemon juice. This method will be a good addition to one of the methods of dealing with plaque, but alone it is rather weak. Lemon juice is indispensable for preventing recurrence of plaque, you just need to occasionally wipe it on places where plaque usually forms.

General cleaning

So that you don’t have to rack your brains on how to wash the bath from rust and raids, you need to constantly keep it clean. For the usual cleaning, the following natural products will become indispensable:

1. Soda combined with laundry soap. Effectively clean and disinfect.
2. Starch in tandem with salt. They perfectly clean and disinfect cast-iron bathtubs, contribute to their bleaching.

Now every housewife knows how to clean the bath at home without buying household chemicals.

Popular products from the category household chemicals

The range of household chemicals is very impressive. After analyzing the reviews of housewives, you can rank the bathroom cleaners that are most popular:

This is not the whole list of possible means by which you can effectively clean a cast-iron bath at home.

Although the bathroom and toilet are the smallest rooms in the apartment, it is not so easy to wash them to a shine and keep them fresh and clean on a regular basis. Dirt and rust, limescale and disgusting yellow stains appear again and again and haunt the housewives.

Effective bath cleaners

In order to wash the bathtub and tiles on the floor and walls to a shine, there are many folk remedies, and the chemical industry came to the rescue a long time ago, developing and releasing a bunch of special products to facilitate cleaning bathrooms.

Today in homes you can find one of three types of baths: acrylic, cast iron, enameled.

It should be understood that products that effectively clean one type of bathtub from plaque and stains may not only not be suitable for the second type, but also damage it. Therefore it should choose carefully and thoughtfully.

Cast iron bath cleaners

There are two big problems with cast iron bathtubs: the use of zirconium salts when applying enamel leads to rust over time, very quick tarnishing and loss of appearance.

Despite the fact that cast iron is an almost eternal material, the inner surface of the cast iron bath is covered with delicate enamel, which means that the first product that comes across is not suitable for washing. It is not recommended to use products containing abrasive particles or concentrated acids, as well as products containing oxygen, such as "Sanitary 2" and "Silit".

These substances remove rust and deposits perfectly, but at the same time damage the top layer of enamel due to the content of hydrochloric acid concentrate. All this will lead to the fact that the surface of the bath becomes rough and dull.

1. cif. An all-purpose spray or cream, great for cleaning bathtubs and sinks, toilets and tiles. To clean the bath, you need to apply it to the bottom and walls of the bath, and rinse with water after 5 minutes.
2. Sannox. It copes well with limescale, rust, as well as organic and fatty deposits, even if they are old. In addition, the tool eliminates unpleasant odors and kills E. coli and staphylococci.
3. Comet gel or spray. Effectively removes dirt and lime scale and leaves a dirt-repellent film on the surface of the bathtub.
4. Phenolux. A very effective gel. Destroys a rust, soap stains and a raid right after drawing, without long waiting.

Folk ways to effectively clean cast iron baths

If the pollution is old, you need to fill the bath with warm water and dissolve vinegar essence (200 ml) in it. After three hours, the water should be washed off and the bath rinsed with running water.

Good for cleaning surfaces toilet soap mixed with baking soda.

With very strong deposits, add a few drops of ammonia to the soda and apply the composition with a nylon brush.

To whiten a bath, you should powder bleach dilute with water so that it is thick, creamy, and then apply it to the surface of the bath and leave until it dries. After that, it should be washed off.

Acrylic Bath Cleaners

For the care of acrylic, it is not recommended to use products containing chlorine, gasoline, alkali, ammonia, acetone and other acids. Metal brushes and hard sponges should not be used. The following substances are perfect for cleaning acrylic surfaces:

• Bass. For cleaning acrylic bathtubs, use only in liquid or gel form.
• Acrylan. Care foam for acrylic. Perfectly deletes a rust, a mold, a fungus, soap stains and old stains. Leaves a film on the surface that does not allow lime to accumulate.
• Team pro. An environmentally friendly and effective product that removes plaque and dirt, as well as adding shine to acrylic.
• It is popularly recommended to use vinegar and lemon juice to clean acrylic. This mixture should be applied to the surface and washed off with warm water after a while.
• To disinfect the bath, you need to fill it and leave it for 15 minutes with a solution of 7% bleach, then thoroughly wash and polish.

Enamel bath cleaners

To clean enamel baths, you should use the chemicals used to clean cast iron baths, but it is better to use folk remedies so as not to damage the thin enamel layer.

Floor and wall tile care products

You can clean the tiles on the floor and walls of the bathroom both with the help of special tools and by resorting to folk methods. In this case, you must adhere to the following rules:

Must use protective gloves for hands regardless of the means used. You need to clean the tiles on the walls from the bottom up, and rinse and wipe in the opposite direction.

After washing, the tiles on the floor along the walls should be wiped dry with a special moisture-absorbing rag or napkin.

If chemicals are used, study their composition carefully.. The use of compounds containing abrasives is not recommended. Be very careful when using products that have acids in their composition. Abrasives and acids can damage the top layer of the tile.

Apply the chemical agent in small parts, because after drying on the tile, it can damage the top layer.

Folk ways to clean tiles

Dissolve 45 grams of acetic acid in a liter of water and spray on the tile. Wash off with clean water after a few minutes.

Help clean tiles citric acid solution which also has bactericidal properties.

Chlorine is a great cleanser, removes most of the organic matter, disinfects and bleaches. Can be used as White. Before use, it is required to apply on one seam and see if its color changes or not.

Baking soda. Apply in the form of a creamy mass, but not in a dry form, as the top layer can be scratched. After use, rinse the tiles with warm water to avoid the appearance of plaque.

dissolved in water ammonia It perfectly scrubs tiles and seams, but it has an unpleasant odor and is dangerous in large quantities. Glass cleaners do an excellent job of cleaning tiles.

Melamine sponge. It is necessary to moisten with water and wipe the tile without strong pressure. The weaker the pressure, the better the result. Very well draws impurities even from the smallest pores.

The steam generator perfectly removes most of the dirt from tiles and grouts. Toothbrush it is also very effective, as it perfectly cleans even the recesses from mold and dirt particles.

In addition to the bathtub and tiles in the bathroom, there is also a toilet bowl, which is perfectly cleaned of limescale with the help of toilet paper left overnight under the rim, previously soaked in vinegar.

In the morning, you should clean the toilet with a regular brush. Can use baking soda. It should fill the toilet bowl, and pour a mixture of vinegar and lemon juice on top. Rinse thoroughly after a few hours. As a preventive measure, it is recommended to pour a bucket of hot water into the toilet once or twice a month to avoid blockages.

One of the main conditions for a comfortable stay in the bathroom is the cleanliness of sanitary equipment. To comply with hygiene requirements and keep the bathroom in order, it is enough to buy a bath cleaner.

Consider what products are in demand in domestic stores, why it is good, and what does not satisfy users.

Due to low demand, it is unprofitable for manufacturers to produce special solutions for washing bathtubs, cleaning or sinks, so most of the formulations on the market are universal. Modern sprays and gels are suitable for ceramics, tiles, glass and chrome elements.

If the bottle label contains the inscription "for cleaning plumbing", this does not mean that the solution is suitable for acrylic or enamel - be sure to read everything that is written in small print

Oddly enough, the best bath cleaners are universal solutions. The TOP-10 contains samples that have received the most positive feedback and are relatively safe for health.

Spot #1 - Synergetic Spray

The pleasantly smelling composition came to the first place due to its versatility, environmental friendliness and low cost. It is biodegradable and does not contain chlorine. Hypoallergenic, therefore suitable for cleaning children's bathrooms. In addition to plumbing, the spray can be used to process tiles, surfaces made of artificial stone, plastic, enamel.

The composition of the product does not harm biological water treatment systems, so owners of private houses and summer cottages often buy Synergetic. It washes away impurities qualitatively, and it works effectively in combination with cold water.

Characteristics:

• antibacterial - yes;
• removes odor - yes;
• from rust - yes;
• acrylic bath - yes;
• chlorine in the composition - no.

The main advantages of the detergent are in its composition, which does not destroy chrome, nickel, ceramic, plastic surfaces. The liquid smells good, does not cause discomfort when inhaling the aroma. It copes well with lime and stains, especially fresh ones.

According to reviews, old smudges are not up to the spray, it is better to use it for daily or frequent cleaning. You can meet complaints about washing off the enamel from the baths - it is possible that the acid contained in the spray destroys the low-quality enamel coatings of steel and cast iron baths.

Spot #2 - GraSS Gloss Spray

The liquid product applied with a sprayer is universal and suitable for almost all surfaces that can be found in the bathroom: ceramics, tiles, plastic, glass. The manufacturer recommends the use of a cleaning spray for acrylic bathtubs and guarantees the preservation of the appearance and structure.

The active ingredient is citric acid, which actively fights lime deposits and salt stains. A well-chosen composition also copes with rust, especially fresh marks from metal objects - chains, tubes with shaving foam. Suitable for processing materials sensitive to acid, but with one condition: the cleaning liquid is applied for half a minute and immediately washed off with water.

Characteristics:

• purpose - cleaning plumbing;
• antibacterial - yes;
• removes odor - yes;
• from rust - yes;
• from lime deposits - yes;
• acrylic bath - yes;
• chlorine in the composition - no.

Due to its availability and low cost, GraSS spray is one of the most popular products. Customers like that with one bottle they can tidy up the walls, floor, plumbing and bathroom mirror. Fresh stains and smudges are removed without difficulty. Users claim that even without protection, the liquid does not corrode the skin, although the manufacturer advises to still wear rubber gloves.

Worse, the tool copes with stubborn stains and old lime stains. Perhaps this is the only minus of the spray.

Seat #3 - Comet Gel

Comet brand products are known to a wide range of users due to successful advertising. And, as a result, bath gel sales are booming. However, the cleaning composition really removes dirt from ceramics and tiles, as evidenced by hundreds of positive reviews. Particularly successful is the destruction of rusty stains that tap water leaves on the surface of the bath.

The name of the series “7 Days of Cleanliness” partially reflects reality - after cleaning the bathroom with a universal gel, tiles and plumbing begin to shine, and the gloss remains for some time. The manufacturer warns that you can not use the product for cleaning products made of natural stone, metals, as well as for washing dishes.

Characteristics:

• purpose - cleaning plumbing;
• antibacterial - yes;
• removes odor - yes;
• from rust - yes;
• from lime deposits - yes;
• acrylic bath - yes;
• chlorine in the composition - no.

The acid remedy was rated mostly positively by users. They note the high-quality cleaning of ceramics and tiles from rusty stains and lime. The composition is great for washing sinks and toilets, but care must be taken when processing other items. The manufacturer advises to do a trial cleaning to make sure the composition is safe.

The main complaints relate to a strong smell, which persists for some time after cleaning. Many people notice that the gel is not thick enough, which is why it is quickly spent and is less effective.

Place #4 - Sanfor Expert Gel

A highly scented, versatile, inexpensive alternative to a washroom and bathroom cleaner. A pronounced floral scent that spreads during use is called "Alpine Freshness". The blue gel foams up a lot when mixed with water, so more water is needed for rinsing.

Does not contain chlorine, the main components are acids. For this reason, the manufacturer does not recommend cleaning products on which enamel is chipped, as well as objects made of natural stone. Also, before washing enamel and acrylic baths, it is customary to test small areas so as not to get an unpleasant surprise as a result.

Like other acid products, Comet Gel should not be mixed with other cleaning powders, gels and sprays in order to avoid an unexpected reaction that is primarily dangerous to the health of users.

Characteristics:

• purpose - cleaning plumbing;
• antibacterial - yes;
• removes odor - yes;
• from rust - yes;
• from lime deposits - yes;
• acrylic bath - yes;
• chlorine in the composition - no.

Buyers do not complain about the quality of cleaning bathrooms with light dirt - fresh stains are removed without a trace. It is more difficult with an old water stone, for some it disappears after “soaking” in the gel, for others it remains. The smell of irritation does not cause, for many it seems pleasant and appropriate.

There are few negative points - a large amount of foam and the inability to clean acid-sensitive surfaces.

Seat #5 - Unicum Spray

An effective remedy for owners of acrylic bathtubs who are not content with universal solutions, but prefer special formulations. The spray is suitable for regular washing of both bathtubs and showers, the body of which is also made of acrylic.

The agent sprayed onto the polymer surface acts gently, while removing rusty smudges, lime and soap stains, makes the surface shine and keep clean for a long time. But it has a big drawback - a very pungent odor, which is caused either by the antifungal component included in the composition, or by other aggressive additives.

Perhaps that is why the composition must be applied for only 15-20 seconds, for a maximum of 1 minute, and then it needs to be washed off.

Characteristics:

• purpose - cleaning of acrylic surfaces;
• antibacterial - yes;
• removes odor - yes;
• from rust - yes;
• from lime deposits - yes;
• acrylic bath - yes;
• chlorine in the composition - no.

The spray cleaning quality is rated as good. It easily copes with dirt, removes even old stubborn stains on bathtubs and lime stains on transparent plastic booths. The liquid is consumed sparingly thanks to the atomizer, so the bottle lasts for a long time.

The main disadvantage is the pungent smell, which not everyone can endure. Due to the atomizer, tiny droplets enter the air and impede breathing. The product is not recommended for people with sensitive skin.

Seat #6 - SARMA Gel

The main active ingredient is oxalic acid, which is often used to remove lime. However, the gel is universal and is designed to fight rust, dirt, germs and even mold with equal efficiency. Simply put, this is a good disinfectant that will help keep plumbing clean with regular use.

There are similar varieties: Universal, Antirust, Disinfection, etc. Bath cleaners have a standard bottle shape, while toilet gel is in containers with an easily recognizable neck. The composition of all these funds is practically the same. Therefore, any of them can be used to tidy up sinks, bathtubs, toilets, bidets, booths.

Characteristics:

• purpose - cleaning plumbing;
• antibacterial - yes;
• removes odor - yes;
• from rust - yes;
• from lime deposits - yes;
• acrylic bath - yes;
• chlorine in the composition - no.

Buyers positively assessed the quality of cleaning with an inexpensive tool: just apply the gel, leave for a few minutes and rinse off, as tiles, ceramics or enamel begin to shine with cleanliness. Many people have the opinion that the solution not only washes away dirt, but also whitens the surface.

Unfortunately, like many acid products, Sarma does not cope with the yellowness and stubborn stains that are characteristic of old cast-iron bathtubs.

Seat #7 - Tub&Shower Spray

The hypoallergenic product of the Canadian company Eco mist is designed to remove all types of dirt in the bathroom. It removes soap stains and splashes from the walls of booths, smudges from faucets, stains on the bath. Cleans tiles to a shine. Fights fungus and mold: for this, it is necessary to spray the agent over the entire affected area and leave for 10-11 minutes, then rinse.

Characteristics:

• purpose - cleaning plumbing;
• antibacterial - yes;
• removes odor - no;
• from rust - no;
• from lime deposits - yes;
• acrylic bath - yes;
• chlorine in the composition - no.

Users like the safety of using the product at home, the absence of toxicity, and a convenient dispenser.

The inconvenience is caused by the lack of effectiveness inherent in more aggressive universal means. For example, the composition does not fight well with traces of rust on enamel and ceramics, so you will have to use another tool to remove them. And another negative point is the high cost characteristic of natural biodegradable cleaning solutions.

Spot #8 - Ecover Spray

An acidic remedy, which many consider natural due to the absence of chlorine. The main active ingredient is citric acid. Also included are fragrances with the smell of citrus and non-ionic surfactants. A tool made in Belgium copes well with lime deposits, a little worse with rust.

In addition to performing basic cleaning functions, it fights mold, drowns out the smell of sewage with a pleasant aroma. Not suitable for cleaning granite, marble and enameled surfaces. But it cleans nickel-plated and chrome-plated taps, shower heads to a shine, does not harm plastic.

Characteristics:

• purpose - cleaning plumbing;
• antibacterial - yes;
• removes odor - yes;
• from rust - yes;
• from lime deposits - yes;
• acrylic bath - yes;
• chlorine in the composition - no.

According to reviews, it is an excellent tool for daily care of the bathroom. Using a spray bottle is convenient and pleasant. Does not irritate the skin, freshens the air during cleaning. Suitable for sewer systems with septic tanks and SBOs.

The main disadvantage is the high cost. Buyers who regularly use bathroom cleaners prefer cheaper domestic-made counterparts.

Place #9 - Sanox Gel

Inexpensive universal remedy for those who appreciate the price-quality ratio. The composition is not concentrated, so it takes a lot to clean the bath. But, given the low cost of the bottle, you can use it without particularly saving. Removes grease stains, natural dirt, rust and limescale.

Kills bacteria, but does not effectively fight odors. Own "aroma" is not pleasant, it causes negative sensations. It is immediately noticeable that the composition is "chemical". Like all acid products, it is considered aggressive for enamel, so before the first cleaning it is necessary to test clean a small area.

Characteristics:

• purpose - cleaning plumbing;
• antibacterial - yes;
• removes odor - no;
• from rust - yes;
• from lime deposits - yes;
• acrylic bath - yes;
• chlorine in the composition - no.

The main positive quality is low cost. Thanks to her, the product is bought not only for home use, but also for cleaning the bathrooms of children's institutions, hotels, public institutions, catering points.

Disadvantages - pungent odor, lack of dispenser. Contraindicated for housewives with sensitive skin and allergies to chemicals.

Location #10 - EasyWork Cleaning Fluid

Large five-liter plastic canisters have gained popularity due to their economy. Inside the containers there is a liquid, which for high-quality cleaning must be distributed over the surface, and this is quite difficult to do due to fluidity. As a result, cleaning is laborious and inefficient.

However, the manufacturer claims that the product is intended for cleaning surfaces of various kinds, especially for ceramic products, plumbing, chrome taps - that is, for almost all items in the bathroom.

The liquid receives cleaning qualities due to the presence of chlorine, or rather, hypochlorite, which contains more than 90% active chlorine. This component can fight mold and fungus, which can be useful in rooms with high humidity.

Characteristics:

• purpose - cleaning plumbing;
• antibacterial - yes;
• removes odor - yes;
• from rust - yes;
• from lime deposits - yes;
• acrylic bath - yes;
• chlorine in the composition - yes.

The main advantage of the tool is its economical cost. Technical containers are often purchased not for domestic use, but for cleaning toilet rooms in public institutions. For home use, it is better to choose a more concentrated, but less safe and effective composition.

The main disadvantage is toxicity. Many buyers have abandoned household chemicals containing chlorine, as its negative impact on human health has long been proven, especially with constant contact. Before you clean your home bathtub with bleach, try a more gentle composition - at least a solution of baking soda and laundry soap.

Household chemicals do a good job of removing limescale, soap stains, greasy dirt, and traces of rust due to the aggressive substances that make up the solutions. However, caustic ingredients, along with dirt, can remove some of the coating, leaving the bathtub looking unkempt.

Add site to bookmarks

• Kinds
• Choice
• Mounting
• Finishing
• Repair
• Installation
• Device
• Cleaning

Bath cleaning with natural products

Cleaning the apartment has always occupied not the last place in a person's life, and cleaning the apartment after repair can be attributed to one of the most difficult tasks. The bathroom is considered the most problematic place, which we are often used to seeing as radiant whiteness and cleanliness, but after repairs, we are simply horrified by limescale, rust, cement mortar or tile adhesive residues. And then the main question becomes before us: how to get rid of the remnants of building materials and how to wash the bath to its former whiteness?

The bath can be cleaned by many means, whichever you choose, work only with gloves.

Hoping to get the bathtub cleaned as quickly as possible, we turn to the chemical miracle cleaners that line the counters of hardware stores. Such products are quite effective, but, firstly, they are much more powerful than required, and secondly, the active substances in their composition are very allergenic and harm not only the human body, but also the environment.

Each housewife has her own secrets in her arsenal, how to wash the bath from strong pollution and carry out general cleaning with safe products that are always at hand.

Natural bath cleaners are very easy to make at home, it doesn't take much time, and it can do the job just as well without harming you or your family.

Basic rules for cleaning bathtubs

Before you start cleaning and make the bathtub perfectly white, you need to familiarize yourself with some rules on how to do it correctly and not spoil the coating of the bathtub itself:

1. Different bathtubs require different cleaning products, because what can perfectly clean a cast-iron bathtub will completely ruin an acrylic one.
2. It is not recommended to clean the enamelled bath with aggressive products containing various acids, as well as to use metal brushes and fiberglass sponges. Otherwise, you risk destroying or damaging the enamel.
3. Acrylic baths do not tolerate alcohol-based products and emulsions, as they corrode the acrylic.
4. Abrasives are able to harm any coating, so it is better to use liquid and creamy solutions.
5. With a sufficiently effective cleaning agent, soft sponges or a regular rag will do just fine to remove dirt.

Despite the fact that many are already seriously thinking about replacing the good old cast-iron bathtub with a new acrylic one, it is still popular. You should not trust commercials and believe in the unique properties of acrylic, because along with certain advantages, such bathtubs are very capricious in cleaning and have a rather low mechanical strength. Therefore, not all natural hygiene products are suitable for washing such a bath.

Back to index

How to wash a bath without chemicals?

A very effective way to clean a bathtub after a renovation is baking soda, which can always be found in household use. In addition, vinegar, mustard and salt can be excellent helpers in this matter. Next, we will take a closer look at how to prepare an effective cleaning agent at home based on these components, and how to use them to wash a cast-iron and enamel bath.

Back to index

Baking soda

Baking soda is classified as a mild abrasive. It is a universal and absolutely safe "cleaning powder" for enameled surfaces. Just sprinkle soda on problem areas of the bath, after wetting them, and rub them with a wet sponge. If dirt is in hard-to-reach places, you can use an old toothbrush to remove it.

Back to index

Vinegar

Start cleaning your whirlpool tub by washing the whirlpool system.

Vinegar is not only a powerful cleaner, but also an excellent antibacterial agent. It perfectly dissolves various raids, deposits of water stone and minerals.

Often, gray and yellow spots form on the walls of the bathroom, which are the result of salt deposits. The easiest way to wash them is with vinegar, which will act on them as a solvent. To do this, soak a cloth in vinegar and place it on the stains. After half an hour, salt deposits are easily washed off with water.

For general cleaning of the bath, it is necessary to use vinegar not in its pure form, but in a solution. Dilute the vinegar in equal proportions with water and wipe the contaminated places with a sponge. Such a solution is harmless and will perfectly eliminate not only pollution, but also an unpleasant odor. The sharp vinegary smell will disappear in a few minutes, you can avoid it by adding a couple of drops of any essential oil to the solution.

Back to index

Lemon

You can replace vinegar with lemon juice, which has the same properties. Pure lemon juice will do just as well on stains, rust, and building dirt as cleaning powder. For severe contamination, lemon juice is squeezed out and distributed with a washcloth. Half an hour later, with a rough sponge moistened with lemon juice, the entire surface of the bath is wiped. All dirt is wiped off very easily, while nothing threatens the enamel.

In fact, I found this tool not today and not yesterday, but several years ago and during this time I have been using it invariably and I am not going to change it for anything yet.

Sanelit is produced in Russia, ZAO "Aist", St. Petersburg.

It satisfies me completely for a bath, in my opinion, the best tool can not be imagined!

Washes away any dirt, including rust deposits, lime and soap stains, without much effort.

You just need to apply the product, wait 10 minutes and rub it a little with the rough side of the sponge, if it is slightly dirty, you can use a simple sponge.

Not only does it clean well, it also fine smells, does not irritate, does not hurt the eyes and throat ... the smell for me even nice.

Virtually no effect on hands. It doesn't dry out or irritate even my dry skin.

The tool is generally universal, suitable for any materials in the bathroom and bathroom.

Ceramics, chrome, faucets, tiles, stainless steel, acrylic ... all this can be washed with it, it cleans it to a shine and squeak!

The enameled bathtub and the ceramic sink in the bathroom are washed only by him, the faucet and the shower too, does not spoil or corrode anything.

Consistency him gel-like, semi-liquid, easy to apply, by pressing on the bottle, through dosing hole.

The price is ridiculous, 45 rubles for 500 ml, enough for a long time.

If you haven't tried it yet, highly recommend you definitely won't regret it does not concede to any expensive advertised means!

There is also my review about another tool: