Small furniture shop. Furniture production as a business: which direction to choose? List of materials for the production of cabinet furniture

Cabinet furniture is used by a fairly wide target audience - both budget and wealthy buyers purchase structural elements for decorating a home or office, as well as enterprises. Definitely, if we consider such a business idea as a startup, then there is a rational grain here - there will be customers, there is no need to spend too much on development, and the product is in demand. Therefore, further we will talk about how to open a furniture production, draw up a business plan and what income you can count on.

How to develop a furniture manufacturing business?

Today, most of the niche in this direction of entrepreneurship is occupied by medium and small businesses, as well as small workshops and workshops. If we analyze consumer demand, then the demand for furniture is as follows:

• Cabinet.
• Office.
• Kitchens.
• Cushioned furniture.
• Children's upholstered and cabinet furniture.
• Furniture for a summer residence.
• Specialized custom-made furniture - for production, enterprises and similar places

It is impossible not to note the appearance of the furniture - design trends change almost every season, and therefore small industries have a significant advantage over large-scale production - you can quickly switch to the release of a new line.

The main target audience for the products of the furniture workshop is as follows:

• Young families, including those with schoolchildren.
• Elderly people, citizens of pre-retirement age.
• Owners of small and medium-sized businesses - for office furnishings, workshops, and so on.

And since people in these categories are in the majority, it is possible, subject to good work, to secure a stable influx of customers.

Starting a business - first steps

In order for the furniture manufacturing business to be effective, you need to carefully think over and prepare everything beforehand, and only then launch your project. In this case, we are talking about the following specific features:

• In most cases, small or medium-sized businesses do not contain warehouses for finished products, in any case, large areas, and therefore the best option would be to work on order. But, on the other hand, you need to provide yourself with a stable flow of orders in order not to work to zero and not pay employees downtime.
• Advertising must be, even if we are talking about a small workshop, or medium-scale production. But, it’s not worth putting large amounts of money into the business plan for the production of cabinet furniture right away - it’s better to put most of the budget into production.
• It will not be superfluous to open your own small store for the sale of ready-made samples. But, it is better to do this a little later, after you have studied the preferences of your target audience well.
• A huge plus will be the presence of its own delivery service and a team of assemblers. Thus, you will, in fact, provide a full range of services, and this is an advantage over competitors.

Furniture manufacturing as a business requires a mandatory preliminary analysis of competitors and the market as a whole. Preliminary work includes the following:

• Evaluation of the work of firms-main competitors. This will help you identify their weaknesses and "play" on it - what they don't have, you can (of course, in a good way).
• Analysis of the solvency of your target audience - this will help you build a flexible pricing policy, and therefore provide the most favorable conditions on the market.
• Analysis of start-up costs, as well as monthly expenses.

All this will be needed in order to draw up a detailed business plan for furniture production with calculations.

Please also note that a business plan will be a necessary document if you intend to take a loan from a bank to develop your business.

How to write a furniture manufacturing business plan

A business plan for the production of furniture is, in fact, a fundamental document for the development of a business. Therefore, it is necessary to pay special attention to its compilation.

The structure of this document is something like this:

• The purpose of opening a production is the type of products produced, the proposed assortment for a start (later you will expand it, remove some positions). Also here you need to enter the technological process of production, the estimated payback period.
• Financial plans: spending own funds, attracting credit funds or co-founders' funds.
• Organization of production - rent or purchase of premises for a workshop, availability of a warehouse, office space, purchase of equipment and materials, accessories.
• Target audience - intermediaries, retail and wholesale buyers, individual customers, creation of their own network.
• Sales of products - own store, work only on individual orders, cooperation with furniture stores, intermediaries. You can also consider tenders.
• Business promotion and advertising. The item of expenditure on advertising should be prescribed no less carefully than the cost of arranging production, since at first it is advertising that will give customers, and hence profit to the enterprise.
• The documentary part is the costs of registering the enterprise.

A little advice - it is better to lay down the amounts for expense items a little with a margin, and you also need to separately lay in the business plan for the production of furniture the amount for force majeure.

Marketing part

It can be thought out and worked out at the stage of drawing up a business plan for a furniture factory. The essence of this section of the furniture workshop business plan is, in fact, business development and includes the following steps:

• Opening an office with an exhibition center or a small shop.
• Conclusion of contracts with furniture stores for the implementation or exhibition of their samples.
• Work with tenders - it gives good orders.
• Build your customer base.
• Advertising - the development of your site, a group in a social network, the design of outdoor advertising.
• Launch of an advertising campaign in the media.

Separately, it should be said about advertising: you don’t need empty promises like “the lowest prices and the best quality”, “the deadline for any order is 2 days”, and so on - you need to do everything with high quality, at a reasonable cost, and promise your customers the same in promotional items.

Starting costs

Actually, the purpose of creating a business plan for the production of furniture is just to calculate the financial part. If we take into account the average check in the market, then the starting costs are as follows:

• You will have to spend about 50-70 thousand rubles per month on renting a suitable building. About 1 million rubles will have to be spent on the purchase of a similar premises, but, in fact, in the long run it is more profitable.
• Purchase of the necessary equipment, installation with delivery - about 600,000 rubles.
• Repair of the premises, documentary registration of the business - about 300,000 rubles.
• Purchase of consumables - at least 250,000 rubles, but the price can fluctuate greatly - depending on what kind of furniture you will produce.

Do not forget that a separate article in your furniture shop business plan needs to calculate salaries - also the final cost will depend on how many employees you will have, as well as their specialization and workload.

Features of the production of cabinet furniture

The peculiarity of the production of cabinet furniture is that with the proper use of materials, there will be a minimum of waste. But, if we are talking about upholstered furniture, then there will be more manual labor - upholstery, filling, finishing, and so on. Therefore, additional equipment will also be needed - specifically for sewing.

Schematically, the development of furniture production as a business can be divided into the following main stages:

• Company registration.
• Room selection.
• Purchase of the necessary equipment.
• Hiring.
• Calculation of income and expenditure.

Premises selection

Ideally, if the room for a furniture factory will have a workshop and an office building (no need for a large one). Also, do not forget about a separate room for workers - where they can rest, have lunch, and clean up after work.

If we consider this issue only from the technical side, then the requirements for the premises for the furniture workshop are as follows:

• Compliance with fire safety requirements.
• Absence of dampness.
• The ability to maintain optimal temperature conditions - in our case, this is a range of 18-20 degrees.
• Availability of necessary communications - heating, electricity, sewerage, plumbing, ventilation system. Separately, it should be said about electricity - here you will need a three-phase 380 W, as powerful equipment will be used for work.
• Availability of convenient access roads.

If you want to immediately open a furniture factory, and not just a workshop, then the premises must be selected based on the fact that there should be an opportunity to equip:

• The production room itself, preferably divided into several zones.
• Office - for managers, management, accounting, meetings with clients.
• Household room for workers.
• Shower room and bathroom.
• Stock.

Convenient access roads must be mandatory - both for unloading materials and for unloading finished products.

It is not critical if all these premises are located in more than one place - for example, a warehouse can be rented further from the office, somewhere on the outskirts of the city - it will be much cheaper to rent, and it is easier to find premises for such purposes in a remote area of ​​​​the city.

Necessary equipment

If the budget is limited, then you can buy used equipment - this way you can save 30-50%. But, also take into account that you need to be well versed in the machines, otherwise you can buy not just used equipment, but simply decommissioned.

To get started, you will need the following equipment:

• Band saw - it will be needed for sawing sheets of MDF, chipboard, as well as precise cutting of wood.
• Drying - it is only necessary if you intend to work with natural wood.
• Machines for fine woodworking as well as decoration - for edging, shaping, chamfering and more.
• Equipment for working with glass - engraving, drilling, cutting, sandblasting.
• Devices for working with metal - drilling, for welding, cutting, polishing.
• Sewing equipment - but only if you work with soft structural elements.

In addition to equipment, you will also need hand tools - drills, screwdrivers, staplers, hammers, planers, saws, and so on.

The purchase of consumables must be done based on the established assortment.

Hiring

The well-known phrase “cadres decide everything” in production is more relevant than ever - the quality of the services provided, and hence the efficiency of your furniture production, will depend on the professionalism of your employees.

The classic scheme for such production is as follows:

• About 5 workers who will be directly involved in the manufacture of furniture, but in some cases there may be more - up to 8 people.
• A manager who will search for orders, work with clients.
• Director of operations.
• Furniture delivery and assembly team.
• Accountant.

At first, some functions can be performed independently or delegated to outsourcing. This is often the case with accountants.

Calculation of income and profit

We have already calculated the starting costs for the production of furniture. But, do not forget about the monthly expenses:

• Utility bills - about 30,000 rubles.
• Salary - from 180,000 rubles.
• Advertising expenses - from 20,000 rubles.
• Payment of taxes, small expenses - from 30,000 rubles.

Thus, to start, you will need at least 2 million rubles, and this is not counting monthly expenses.

Now for the profit:

• On average, the workshop sells furniture for 600-700 thousand rubles per month.
• If you subtract planned expenses, then the profit will be about 400 rubles.
• Thus, furniture production will reach full payback in 21 months.

The profitability of such projects is approximately 60%, which is very good. And if we take into account the purchase of the building, then the figures are more than optimistic.

Summing up

Furniture production as a business is an expedient project, but only if you approach this issue correctly. In this case, first of all, you need to work out a good business plan, as well as a marketing strategy.

The profitability of a furniture factory, subject to the purchase of a building for a workshop, is 60%, and this is an excellent indicator in an average city. Special attention should be paid to hiring personnel - the quality of work depends on their skills, and hence the efficiency of your business, profit growth.

In view of the fact that the main target audience of cabinet and upholstered furniture are young families (including those with children), owners of medium and small businesses, subject to quality work, there will be no shortage of customers.

In this article:

The furniture business can be developed in two ways - to sell furniture already made by someone or to produce your own. But it is much more profitable to combine these two streams into one channel. And the easiest option for organizing your own furniture production is the opening of a workshop for the manufacture of cabinet furniture.

What is included in the category "cabinet furniture"

Cabinet furniture is a piece of furniture that has a "box" design and is designed to be placed along the walls. This category includes: tables, racks, cabinets, cabinets, walls and other types of furnituremade from separate hard parts.

The production of cabinet furniture is regulated by the following standards:

• GOST 16371-93: Furniture. General specifications.
• GOST 19882-91: Cabinet furniture. Test methods for stability, strength and deformability.
• GOST 28105-89: Cabinet furniture and tables. Test methods for drawers and half drawers.
• GOST 13025.1-85: Household furniture. Functional dimensions of storage compartments.
• GOST 28136-89: Cabinet wall furniture. Strength test methods.
• GOST 26800.4-86: Furniture for administrative premises. Functional dimensions of cabinet compartments.

Analysis of the market for cabinet furniture

According to the Federal State Statistics Service, the production of cabinet furniture is the most demanded type of furniture business, which occupies about 25% in the niche of all furniture production. Today's consumer is well aware of what cabinet furniture is and why it is needed. At the same time, even the brand or the company's long stay on the market is not important - offer a lower price with decent quality - and your buyer is yours.

If you arrange consumer requirements in the form of a pyramid, then the bottom and most “weighty” tier will be the price, then the materials used, build quality, original design, and only then the manufacturer’s brand. Therefore, despite the huge competition in the cabinet furniture business, there is a place for everyone who can understand the desires of the consumer and predict fashion trends.

Who is a potential buyer?

According to the analysis of age characteristics, the target audience of cabinet furniture buyers is divided into two groups:

• young people under the age of 30 who purchase furniture for the first time;
• the older age category (40-50 years old), who buy new furniture to replace the old one.

The most demanded "representatives" of cabinet furniture are kitchens and walls for the hallway and living room.

Raw materials for the production of cabinet furniture

Cabinet furniture can be made from chipboard, MDF, solid wood. To reduce the cost of production and the final cost of the product, companies often combine these materials, for example, replacing expensive furniture panels in the wall area and partitions with chipboard or laminated fiberboard.

The easiest option to start production is to make furniture from double-sided laminated particle boards (LDSP). Why?

Firstly, there will never be any problems with the supply of such raw materials - laminated chipboard is produced in plenty by both domestic and foreign manufacturers. Secondly, for the same reason (a wide offer), it is possible to agree on favorable delivery terms (with a deferred payment, discounts for large lots, etc.). Thirdly, the use of laminated chipboard significantly reduces the cost of production, since it reduces one stage - veneer or laminate veneer in the manufacture of furniture, which requires additional investment and makes sense only with large volumes of production.

For the selection of raw materials, it is necessary to be guided by the following indicators:

• thickness of chipboard boards (16-18 mm for external walls and 12 for internal partitions);
• density - compliance with GOST 10632-89;
• emission class according to 16371-93 - E1.

For the back walls of furniture, fiberboard (GOST 4598-86) can be used.

Features of the technological process for the production of cabinet furniture

There are several options for the technological process of manufacturing cabinet furniture. They can be divided into chains of various lengths:

• a complete technological process - from the manufacture of material for the hull base (chipboard, MDF, furniture board) to the finished product. This is the best option for mass and serial production, which can significantly reduce the cost of materials, but is very costly from the point of view of small businesses;
• medium - the manufacture of furniture, where the raw materials are finished sheets of chipboard, fiberboard, MDF - in fact, only cutting and assembly;
• short (assembly only) - the production of cabinet furniture is carried out from custom-cut chipboard, chipboard, MDF. This is the most popular option for starting a small business from scratch, which involves working on a specific order without buying expensive cutting equipment. Then, after developing an appropriate customer base and receiving serial orders, you can think about purchasing your own cutting and edge banding machines in order to "lengthen" the process chain and expand production. This explains the relative ease of entering the furniture manufacturing business - in fact, it can be plan in any sequence of the production cycle.

The manufacturing technology of any cabinet furniture is divided into five main stages:

• Drawing up a project of the finished product in various planes;
• Cutting the necessary materials for the details of future furniture;
• Drilling nests for fasteners;
• Facing trim edges (laminated edge, veneer, PVC film);
• Assembly of the finished product.

A detailed description of the technological process depends on the automation of production and the percentage of the use of manual and mechanized labor. The most progressive (and, accordingly, expensive) production is considered to be equipped with automated machines (CNC). The operator only needs to enter the dimensional data into a special computer program, design the desired product and give the “start” command.

In just a few minutes, the CNC machine will cut out the necessary walls and partitions of future cabinet furniture from clearly fixed materials, drill holes according to the development plan. It remains only to veneer the edges and assemble the finished furniture. But it is profitable to buy such lines in the presence of constant serial orders. It does not make sense to reconfigure the machine for each piece of furniture on an individual order. Therefore, let's consider for example the "golden mean" - the work of a semi-automatic line of several machines with partial use of manual labor.

To start such a production, you will need the following equipment:

1. panel saw with manual feed of materials;

2. edge banding machine for straight edges, concave and convex elements;

3. drilling and filler machine for making blind and open holes for fittings, hinges, dowels;

4. grinder;

5. screwdrivers;

6. perforator;

7. cutting tools (milling cutters, drills, knives).

Description of the production technology of cabinet furniture

1) After the development and approval of the sketch by the customer, a model of the future product is created using a computer program , which can be installed on a regular laptop.

For example:

• Cutting- a program for choosing the optimal cutting of sheets of chipboard, chipboard, MDF with the least loss;
• PRO 100- a program for visualizing a sketch of a model in 3D, drawing up a design, constructing and calculating the necessary materials, parts and accessories for assembly.

But manufacturers of automatic and semi-automatic machines offer other types of programs already installed on their equipment, such as "UCANCAM V9", "ArtCAM", etc.

2) A plate of the material from which the product will be made is fixed on the machine, sawn into separate parts in accordance with the cutting charts.

If furniture is made from fiberboard - this is where the preparatory work ends - the parts are sent for assembly. If we are talking about furniture made of chipboard or chipboard - rough blanks are subject to mandatory machining of sawn edges;

3) Furniture parts made of chipboard come to the edge banding machine, where with the help of glue and pressure press slices of plates are faced with a laminated edge , PVC film, melamine or other edging materials;

4) Depending on the equipment of the machine, holes for fasteners are done:

• semi-automatically- on filler machines;
• manually, using rotary hammers and electric drills, using drawings with additive schemes.

6) After the holes are added, the product is polished along the edges (to smooth, remove the overhangs of the edging material in height and length) and sent for assembly;

7) Control Assembly using a hand tool helps to identify shortcomings and inconsistencies and eliminate them in the finished product. After that, the furniture is disassembled (if necessary), packed and sent to the finished product warehouse.

Estimated business plan for organizing the production of cabinet furniture

1. Project goals

The company plans to open a furniture shop for the production of cabinet furniture of the middle price segment.

Range: cabinets, tables, shelving, bedside tables. The production will be organized on the principle of an incomplete cycle: raw materials in the form of chipboard and fiberboard boards, as well as accessories, will be purchased from suppliers for further cutting according to patterns into finished panels, processing and assembling furniture according to the developed drawings.

2. Financing

To launch production, it is planned to attract the own funds of the founders of the LLC, which will reduce the payback period and give an advantage in the formation of pricing policy.

3. Target group of buyers:

• intermediaries - specialized furniture stores, repair and design studios;
• end consumers (retail) - people with an average income who prefer to renew furniture every 3-4 years;
• final consumers (wholesale) - state enterprises and state institutions, office centers, hotels.

4. Ways of implementation:

A) through a warehouse-shop in which samples of work will be exhibited and an office equipped to receive customers;

B) direct deliveries of furniture batches to private companies and government agencies; C) through dealer networks (including in other regions).

5. Advertising campaign

Advertising will be built with the expectation of the target group of consumers, for which the following will be used: media (advertising in the press of the relevant subject), the creation and promotion of your own website on the Internet, placement of advertising banners on websites dedicated to interior design and renovation of premises. It is planned to allocate 60,000 rubles per month for advertising purposes.

6. Organizational issues

For the legal registration of the business, it was decided to create a Limited Liability Company (LLC) on the general taxation system. This form makes it possible to work with both large wholesale suppliers and consumers, as well as retail buyers.

The following documents are required to register a company:

• information about the name of the enterprise;
• decision of the founders (protocol) on the opening;
• information about the director and accountant;
• details of the account opened for the contribution of the authorized capital (if the contribution is in cash), and the current account for conducting business activities;
• confirmation of payment of state duty;
• charter, indicating the amount of the authorized capital (at least 10,000 rubles) and such types of activities:
  • 36.12 Manufacture of furniture for offices and shops
  • 36.13 Manufacture of kitchen furniture
  • 36.14 Manufacture of other furniture
  • 51.47.11 Wholesale of furniture
  • 52.44.1 Retail sale of furniture
  • 52.44.5 Retail sale of wood products, cork and wickerwork
  • 52.61.2 Retail sales carried out directly by means of television, radio, telephone and the Internet.

7. Requirements for the premises for the production of cabinet furniture

• First floor,
• availability of all communications,
• three-phase electricity 380 W,
• access roads and loading docks,
• lack of moisture and high humidity.

It is planned to rent a room of 500 m 2 at a price of 240 rubles / m 2, broken down into 3 parts:

• office with an exhibition hall, with an area of ​​50 m 2 ;
• workshop for the production of cabinet furniture, with an area of ​​350 m 2;
• warehouse of raw materials and finished products - 100 m 2.

Total - 120,000 rubles / month (1,440,000 rubles / year).

8. Staff

To work in one shift (21 working days / month, including holidays and weekends), the following staff is required:

• director - 40,000 rubles / month;
• accountant - 35,000 rubles / month;
• customer service manager - 20,000 rubles / month;
• designer-designer - 25,000 rubles / month;
• master of production - 30,000 rubles / month;
• shop specialists - workers with knowledge of the main types of furniture machines and the features of working with chipboard, fiberboard and MDF boards (5 people for 20,000 rubles / month);
• auxiliary workers - (2 people at 12,000 rubles / month).

Total: 12 people.

Estimated Wage Fund - 274,000 rubles / month.

Payroll taxes (37.5%) - 102,750 rubles / month.

Total salary costs - 376,750 rubles / month.

9. Main and auxiliary equipment

Total cost - 423 950 rubles

10. Performance

It is planned to release products in the following volumes:

• pedestals - 100 pieces / month,
• tables - 100 pieces / month,
• cabinets - 100 pieces / month,
• racks - 100 pieces / month.

11. Calculation of the cost of production

According to the calculated data of the table of consumption of materials for output

and prices for materials

The cost of production will consist of the following material costs:

• consumption of materials,
• electricity,
• advertising,
• the salary,
• depreciation,
• rent.

Pedestals - 18,354 (material costs) + 207.59 (electricity) + 94,187.5 (payroll + unified social tax) + 21,197.5 (depreciation) + 45,000 (other costs: rent, advertising) = 178,946.59 rubles /month.

Tables - 27,550 + 207.59 + 94,187.5 + 21,197.5 + 45,000 = 188,142.59 rubles / month.

Cabinets - 44,647 + 207.59 + 94,187.5 + 21,197.5 + 45,000 = 205,239.59 rubles / month.

Shelving - 19,210 + 207.59 + 94,187.5 + 21,197.5 + 45,000 = 179,802.59 rubles / month.

Total: 752,131.36 rubles / month.

12. Price

Calculation of the wholesale selling price per unit of production (cost per unit of production + profit margin):

Cabinets - (178,946.59 rubles: 100 pieces / month) + 25% = 2,236.83 rubles.

Tables - (188,142.59 rubles: 100 pieces / month) + 25% = 2,351.78 rubles.

Cabinets - (205,239.59 rubles: 100 pieces / month) + 25% = 2,565.49 rubles.

Racks - (179,802.59 rubles: 100 pieces / month) + 25% \u003d 2,247.53 rubles.

13. Revenue and profit

Revenue: 2,236.83 * 100 pieces + 2,351.78 * 100 pieces + 2,565.49 * 100 pieces + 2,247.53 * 100 pieces = 940,163 rubles / month.

Cost: 752,131.36 rubles / month.

Balance sheet profit: 940,163 - 752,131.36 = 188,031.64 rubles / month.

Income tax (20%): RUB 37,606.33/month.

Net profit: 940,163 - 752,131.36 - 37,606.33 = 150,425.31 rubles / month.

14. Financial analysis

Expenditure part

• material costs - 752,131.36 rubles;
• capital costs - 423,950 rubles.

Total: 1,176,081.36

15. Product profitability

(Balance Sheet: Cost) * 100% = (188,031.64: 752,131.36) * 100% = 25%

With the manufacture of 400 units of cabinet furniture per month, the payback of the project will be 8 months.

On the modern Russian market, the production of cabinet furniture occupies a quarter of the entire furniture production. Small and medium-sized businesses consider this industry profitable and profitable - the demand for quality products is stable. Consider how much investment is required to organize your own furniture workshop, how difficult it is to lead the market and whether it is worth it for novice entrepreneurs to try themselves in this area.

Demand for cabinet furniture is currently very high. In general, it is always quite high, but at present, the growth of interest is due to the revival of the new housing market.

When buying a new apartment or repairing an old one, the acquisition of new cabinet furniture is almost inevitable. This is the basis of any interior.

Cabinet furniture is all furniture made of solid modules, installed and fastened horizontally and vertically. This variety includes:

• cabinets;
• buffets;
• headsets;
• storage areas;
• racks, "walls", shelves, bedside tables;
• dining and writing tables.

At the same time, in modern conditions, one cannot complain about the lack of supply. Both small workshops and huge corporations actively sell their furniture. The furniture manufacturing business exists in a highly competitive environment.- this is the main reason for the closure of most start-ups. Therefore, before trying to realize yourself in this area, it is worth drawing up a business plan, analyzing costs and taking into account all the pros and cons.

Cabinet furniture is all furniture made from solid modules.

What materials are cabinet furniture made of?

How to start a furniture business from scratch? First you need to find out what modern cabinet furniture is made of. The most common material is chipboard (chipboard) or medium density wood panel (MDF). Solid wood furniture is less common: it costs significantly more, so the demand for it is lower.

Chipboard furniture is much cheaper, as it is made, in fact, from glued wood shavings. Modern methods of decorating allow you to give it a more expensive and solid look, while maintaining a low cost.

If you are planning to start the production of cabinet furniture from chipboard, you definitely need a reliable supplier of materials who will provide you with blanks for work at the right time and in the required volume. It is better to conclude a supply contract with a chipboard manufacturer, rather than purchase materials on demand yourself.

As for related fittings and other materials, it is also necessary to conclude contracts with reliable counterparties for their supply in order to avoid a situation where it is impossible to fulfill an order in due time due to lack of components.

How cabinet furniture is made

Before you start compiling a list of the necessary equipment and other costs for your enterprise, it is important to get at least a general idea of ​​​​the technological process of manufacturing cabinet furniture. Simplified, it can be described as the following cycle:

1. Preparation of the product design, determination of the shape and size of the components
   modules.
2. Production of modules in accordance with the product design.
3. Mounting hole preparation.
4. Section processing (film, veneer, laminated edge).
5. Collection of the finished product.

Any workshop for the production of furniture reproduces this technological cycle in one way or another. Its minor changes depend on the equipment available at the enterprise, production optimization, qualification skills of employees.

The speed and comfort of work depend on the quality of machines and other equipment.

What equipment is required for your own furniture production

Now consider what equipment for the production of furniture is necessary for a start-up enterprise. First of all, these are different types of machines for furniture production:

1. Format cutting. With the help of this machine, modules of the desired size and shape are created from chipboard blanks. They allow you to cut panels horizontally and vertically, as well as at an angle without chipping, with exact observance of the required dimensions. Such machines are divided into varieties depending on the technology of feeding the workpiece: manual, semi-automatic and fully automated.
   

   For small productions, manual ones are suitable - they allow you to serve the required volume and at the same time are cheaper. With the enlargement of the enterprise and the transition to mass production, it is reasonable to replace them with semi-automatic or automatic machines. The price of such machines starts from 200 thousand rubles.

2. Edge banding. The name of this machine speaks directly about its function - processing the edges of the product. Several options for processing cuts are possible: gluing a decorative film, melamine edge tape, installing veneer or wooden slats. For a new such car, you will have to spend at least 600 thousand rubles, for a used one - about 300 thousand.
3. Drilling and filler. Required for mounting hinges and mounting holes. The cost of such a machine starts from 300 thousand rubles.

In addition to machine tools, a modern furniture workshop should be equipped with:

1. Grinding machine - for polishing workpieces or finished products. From 2 thousand rubles, but for production purposes it is better to consider options from 10 thousand rubles.
2. Screwdrivers. There should be several of them, as each employee needs them. The purchase of screwdrivers will have to spend from 30 to 50 thousand rubles.
3. Perforator. From 10 to 20 thousand rubles.
4. Knives, drills and other cutting tools, about 20 thousand rubles.

Thus, only 1,200,000 - 1,500,000 rubles will have to be spent on equipment for making furniture and related tools. You can save money in several ways. For example, to purchase used equipment or to start leasing it.

When buying machines, new or used, carefully consider all associated warranties. A good sign would be the availability of warranty service. Read customer reviews first. The quality of machine tools and other equipment determines the speed and comfort of work, and hence the quantity and quality of products.

Where to open a furniture production

The production of cabinet furniture for business purposes requires quite a lot of space. Conventionally, the entire space can be divided into zones:

• storage of blanks;
• installed machines/workplaces;
• collection and processing of finished products;
• storage of finished cabinet furniture.

For a small enterprise, an area of ​​\u200b\u200babout 100 square meters is required. It is better to rent it in the industrial part of the city: it will cost much less. Make sure that the rented premises have convenient access roads for the delivery of materials and workpieces, as well as loading finished products. The cost of renting a room varies significantly depending on the region, but on average it will cost 100-200 thousand rubles.

For a small enterprise, an area of ​​\u200b\u200babout 100 square meters is required.

How furniture manufacturers work

The majority of furniture manufacturers, especially small businesses, prefer to make and assemble products to order. This approach is beneficial for both parties: buyers receive furniture of the right size, color and configuration, and the manufacturer spends exactly as many resources as necessary and does not work at a loss.

With this approach, one sample is made, which is exhibited in the store with an indication that the copy for sale will be made taking into account the wishes of the client. The main thing with this approach is to produce furniture quickly enough and offer customers the maximum number of options.

Whom to hire

The basis of the furniture enterprise will be workers, mainly carpenters, whose task is to directly manufacture samples and products to order. The number of workers depends on the volume of production, for a small workshop, 2-4 people are enough.

A sales manager is needed to find channels for selling products, interact with customers and collect orders. This specialist negotiates with furniture stores, looking for customers in reality or via the Internet. May act as a marketer and work on the company's sales strategies. The purchasing manager performs the reverse work - looking for suppliers, ensures the timely supply of components for production.

It is very good if it is possible to hire a furniture and interior designer (albeit at half the rate) who will design sample designs and recommend diversified solutions for customers.

When an enterprise assembles furniture according to the customer's measurements, an employee is needed who takes orders and, if necessary, travels to the place and takes measurements (for example, for the manufacture of cabinets, "walls", kitchen sets and shelving). This function can be taken over by a designer or a sales manager.

Advantages and disadvantages of the cabinet furniture business

How profitable would such a business be? Furniture is always in demand, but it is very difficult for start-ups to gain the upper hand over competitors. Therefore, before investing in organizing your own furniture business, carefully evaluate all the pros and cons of this business.

Strengths: high demand and self-realization

1. Cabinet furniture is always in demand, so the manufacturer of quality products will always be able to earn.
2. Relatively small investment in the enterprise. Of course, the initial capital for a furniture company cannot be called minimal. But, firstly, it is significantly lower than the capital required for most other industries. Secondly, investments can be significantly reduced by buying used equipment or leasing it.
3. The possibility of self-realization as a businessman or a craftsman who produces high-demand and high-quality products.

Furniture is always in demand, but it is very difficult for start-ups to gain the upper hand over competitors.

disadvantages

The main disadvantage of the cabinet furniture business is very high competition. Such activities are carried out by small private workshops and huge factories. Startups find it hard to compete, many close after a year and a half of work, having suffered losses.

What gives furniture manufacturers an advantage in the market

Why do some workshops successfully operate in the cabinet furniture market for years, while others close after working for 12-16 months? The reasons can be very diverse, but there are several characteristics that unite successful companies:

1. Good work with quality materials. By purchasing such furniture, buyers expect that it will serve them for at least 10-15 years and at the same time retain its “marketable” appearance. It is quite difficult to guarantee this when working with chipboard, so those companies that combine maximum quality with affordable prices are retained on the market.
2. Maximum attention to the wishes of customers, exact observance of dimensions, variability of colors and textures.
3. Manufacture of furniture of different price categories - for greater coverage of potential buyers.
4. Active advertising campaigns aimed at attracting new customers and loyalty programs for regular ones.

Conclusion

The cabinet furniture business requires an initial capital of at least 1.2 million rubles and a set of specific knowledge. A small business needs 4-6 employees. The competition in this area is very high and is explained by the steady demand among various categories of customers.

Room.

Staff.
Director.
Working staff.
Designer.
Sales Manager.

Marketing.
Advertising.
Types of advertising.
Sales of products.

Financial plan.
Investments.
Payback.

production options.

Manufacture of custom-made furniture.
Business development prospects.

Despite the fact that you won’t surprise anyone with the production of furniture for a long time, the demand for these products is not falling. There is no oversupply in Russia, but production facilities operate in a highly competitive environment.

Not everyone can withstand the competition, someone works for a long time and fruitfully, constantly delighting customers with new models and design solutions. Someone is unable to keep the business in a strong flow and crashes, not having time to really find their place in the market.

Starting a furniture manufacturing business is serious business. Requires mandatory legal registration, clear calculations of investments and plans for the sale of finished products. And in order for the business not to go down in history, it is imperative to follow all the points and make every effort to implement them.

When registering a business, it is best to assign it the status of an LLC. The status itself already speaks of the seriousness of intentions and will help attract investors from outside or as founders. The amount of planned investments is not small and it is unlikely that it will be possible to do without additional injections. The LLC status provides an opportunity to generate additional income through the register of additional activities and expand the business in the future.

Also, this legal status gives prospects for participation in profitable tenders and cooperation with serious chains of furniture supermarkets, which positively affects the reputation and income of the enterprise.

Room.

After all the design actions, it is necessary to organize the room where the workshop will be located. The industrial zone of the city is best suited. The room you need is not small - about 300 m2. Hangar structures are perfect.

The problem of finding a suitable room is quite urgent, so you need to start doing this in advance. It is best to seek help from companies that specialize in this. They already have offers. They know for what purposes, which premises are suitable, what technical parameters must be met and what standards must be met.

When concluding a lease, be sure to pay attention and stipulate the terms of the lease. You need a long-term lease agreement in order to avoid troubles with moving and re-registration of the production address in the future. Sometimes premises with some equipment already available there are rented out. If you have such an option, that's great.

The rental of production equipment is added to the lease agreement - and you have less costs, and the owner has less headache where to put it and what to do with it.

Equipment for the production of furniture.

To start production, you will need special machines. Buying them is not a problem.

Edge banding machines are necessary for processing synthetic (melamine, PVC, ABS) and natural materials (veneer, paper).

The edge banding process takes place after the cutting process of the material on the format saw. We'll talk about it a little lower. Without fail, the equipment for facing the edges must be selected depending on what kind of furniture you intend to manufacture.

For better understanding, here is a brief description of the process of the machine:
- Manually or by means of an automatic module, glue is applied to the surface, heated to the desired temperature.
- The machine applies an edge according to the dimensions of the workpiece. It is possible to cut the edge with a technological margin.
- Further, with the help of the machine, the edging material is pressed against the surface to be treated.
- After the operation of the machine, the applied edge is finished - removing excess glue, processing the edge, grinding and polishing lines and corners.

It is not superfluous to repeat that the configuration of the machine must be selected according to the type of furniture being manufactured.

They are produced in various formats - both for small-scale production and for batches of industrial volume. Direct purpose - cutting furniture parts from sheet materials (plywood, chipboard, fiberboard).

In order for the work to be carried out without chips, two cutting units are used - the main and the scoring. Perfectly cut laminated material with high precision thanks to the body of the saw unit mounted at an angle. The presence of a scoring saw in the machine provides an absolutely clean cutting, without chips and notches.

Machines are produced in several types, each of them has its own characteristics and special purposes. Your task is to choose from a wide range of proposals exactly the one that is ideal for production. The main difference is the way the workpiece is placed - horizontally or vertically, that is, a transverse or longitudinal cut. And another difference is the type of carriage. Machines are made either with a ball or roller carriage.

No matter what equipment you choose, pay attention to the availability of additional tables. They are indispensable when cutting full-fledged sheets of material. An important point is the clamping upper beam and the upper pneumatic clamp. They will provide reliable fixation of small workpieces, which is necessary in the production of furniture of exclusive design with small details.

The main purpose of the equipment is a more thorough preparation of the part. The machine saws the material to the desired thickness.

The workpiece is installed on the work table exactly with the pre-treated base surface. The workpiece is fed to the rotating knives automatically. Main technical characteristics:
Rated supply voltage - 220 W;
Rated power consumption of the collector motor - from 1500 W;
The frequency of rotation of the planer shaft with planer knives - 8000 rpm (idle);
The average height of the workpiece processed on the machine is 15 cm, the width of the working table is from 25 to 50 cm, with the corresponding width of the workpiece being processed up to 45 cm.
the average speed of the automatic feed of the workpiece is 8 meters per minute.
The average planing depth is 2.5 mm. Depends on the width and properties of the workpiece.

Thicknessing machines are divided into one-sided and two-sided. Unilateral have one knife shaft located above, over a desktop. Double-sided, respectively, have two knife shafts. The second is built into the desktop and performs the function of processing the lower part of the part. The working table itself is movable, with the help of it the required height is set for processing the material to the required thickness. Machines are also distinguished by the power and maximum lifting of the desktop, its width and depth of planing.

A fairly wide price range is convenient for choosing the necessary equipment depending on the buyer's budget. The price depends on the country of manufacture and technical parameters.
When choosing a thicknesser, pay attention to the safety features. The design must necessarily be protected from overloads by a power interruption unit. When an overload occurs, the thermal relay must be activated and the power supply to the machine must be interrupted.

Choose machines with quiet operation that a belt drive can provide. It also protects the engine of the machine from overloads.

For additional safety of machine operation, network switches are often used. In addition to direct functions, they are equipped with a protective function against unauthorized activation during the absence of the operator.

In furniture production, wood or any other material goes through many technological processes, and a four-sided machine is the basic equipment for many of them.

The main function is profiling molded products, cutting boards into lamellas for a furniture board. For a furniture production workshop, sufficiently powerful equipment with a large throughput is required. When choosing a four-sided machine, first of all, you need to pay attention to its dimensions. For example, in order to process a workpiece with a size of 40 cm, a milling cutter of the appropriate parameters (about 80 mm.) is needed. In order for the equipment to cope with the processing of materials of large sizes, a high-feed function is required. The worktable must be robust and wear-tested for stable operation under constant load.

Best of all, strength is shown by machines with cast iron tables. Very convenient and often necessary is the function of increasing the supply and reception tables. To do this, the characteristics of the machine must indicate the presence of a function of manual or automatic regulation. If you are planning a serious production, then your four-sided machine must have a high feed rate - up to 30 meters of processing per second.

Some manufacturers produce universal four-sided processing machines. That is, with the possibility of resmusing and profiling functions. By simply moving the planer knives in the desired direction, the working function can be easily changed. Such a machine will help to significantly save money on starting investments. But for the full-fledged operation of the workshop with maximum output, you still have to pay special attention to each process - this will increase quantitative indicators, which is important.

To fully support the furniture production workshop, there is a fairly large number of different machine tools, but the four most important and mandatory are described above. The purchase of such a kit will cost approximately $40,000.

Staff.
An enterprise in the LLC statue has obligations of mandatory staffing.

Director.
Appointed by the meeting of founders. The candidate may be one of them, or an outsider who meets the requirements of the position.
Full-time accountant. Person with liability. He can easily perform the functions of an employee of the personnel department. Must be familiar with the articles of the Labor Code. Maintain personnel records and related reports.

Working staff.
Operators are needed to maintain production equipment. One for each machine. Workers are also needed to assemble furniture. That's 3 other employees. In general, for a complete staffing of the working staff, you need seven people - this is quite enough for the full-fledged process of the workshop. Workers performing assembly functions can go to the customer's home to install finished orders.

Designer.
Such a specialist is definitely necessary for the enterprise, but it does not have to be full-time at all. Design may well perform the function of "coming". Cooperation is formalized by means of an agreement with an agreement on the number of working hours per week or month and the corresponding salary. A designer can collaborate with several companies at once, have several projects and easily implement them. It would not be superfluous to prescribe in the cooperation agreement a clause not to disclose the plans and concept of the enterprise's work in order to withstand fair competition and without violating one's interests.

Sales Manager.
Don't be skeptical about this much-needed staff. At the first stages of launching production, an employee who will be responsible for sales is more than necessary. Try not to save money and look for an experienced manager with your own client base and a good reputation. This will be of great help in promoting your business. Moreover, the manager also performs the function of an advertising medium. And you need advertising like air.
There are several algorithms for calculating wages for a sales employee:
Fixed amount (rate).

As a rule, a fixed rate is quite rare and is usually accompanied by the official registration of labor activity. Often the amount of the rate is equal to the minimum wage established by law. Someone like this option, we wish them good luck.

Rate +% of sales;
This payroll algorithm is very common among companies. It is actually very convenient for both the owner and the worker. The rate, again, is minimal and the percentage is small because the volume of sales per month (or the planned volume) can be very large. With such volumes, the salary is not higher than 0.5% of this amount, but mainly 0.2-0.3%. The rate, as in the previous paragraph, is the minimum or below the minimum. There are companies that offer a bet of $100. and add to this money% a little higher than usual.

Rate + % of cash receipts for the current month;
In this case, the guaranteed payout amount may be different. The % figure is no more than 1. But, pay your attention to one “BUT” - the manager earns his hard-earned% from the amount of money coming into the company, that is, from the amount that the accounting department sees on the account at the end of the current month. Many beginners confuse or simply do not pay attention to this condition when applying for a job. Naturally, then the problems begin.

% of sales;
One of the most common algorithms. The most profitable % of sales is calculated. Depends on the amount of planned sales for the reporting period. The larger the amount, the lower the percentage. Furniture is an expensive commodity, so the maximum salary for a manager is 3%.

% of the receipt of money for the company for the current month.
Accrual according to the same principle as in paragraph No. 3, only without a guaranteed rate. In this case, the % depends on the planned sales volume - the higher it is, the lower the %. Not the worst algorithm in the event that the manager came to an already established client base, that is, there were already sales in the past period and money for the sold goods will be received this month. This is important, because the majority of clients work with deferred payment, especially for large retail outlets - where the delay can reach up to 3 months.

Basically, according to this algorithm, the sales agent begins to receive a salary not earlier than the third month of work. Let it not surprise you if you agreed to such an algorithm - take it as it is, nothing can be done about it. Before the money for sales begins to flow into the company, you can offer a fixed rate, but it will be minimal or increased - this algorithm is described in paragraph No. 2.

% of profit;
This algorithm is probably the most difficult for the employee to perceive, but very beneficial for the owner.

The bottom line is to pay a commission of 10% of the net profit received from sales. It is important to pay attention to the fact that the profit is calculated from the price at which the product entered the sales department, and not from the cost.

The salaries of employees are determined by the average salaries of employees of the relevant categories and profile of the region in which it is planned to launch production.

Marketing.

Advertising.
Advertising is the most important process in the promotion of furniture production. It is important that a potential client knows about you before the finished product enters the market. There is a lot of competition in this type of business, and if you want to make yourself known, you need to do it in advance.
If you are seriously thinking about fruitful and long-term work, forget about "black" and "gray" production. Develop and register your own TM with Rospatent of the Russian Federation. The registered trademark of the promoted brand is heavily protected from counterfeiting and, in which case, you can always defend your rights.

To do this, you must submit an application and pass a designation check for similarity. The advantage of registration is obvious - the right to use TM for 10 years (after it is successfully renewed) has a positive effect on the company's image and, accordingly, on the reputation and degree of trust on the part of a potential client. For the illegal use of your TM brand, you can claim compensation for material damage through the court.

If you do not have time to do this, there are companies that will take over all the administrative duties for a fee and register the trademark as soon as possible. The cost of such services is about $ 500.

After entering TM in the general register of the State Patent, immediately start advertising the enterprise and its products.

The very first thing to do is to clearly define the market segment and clearly imagine who your customers will be. Who do you want to see in your customer base.
An advertising company is an expensive business, but it does not make sense to save on it. It is necessary to direct it as accurately as possible to the segment that you identified as potential in the first place.

In order for advertising to be of high quality and work correctly, it is imperative to study the market and your competitors. Carefully analyze the pros and cons of their work and products. Analyze the pros and cons of your production. Why is it necessary?
First of all, such an analysis will allow you to clearly define the advantages that you will use in the development of advertising campaigns. These can be high-quality materials, natural wood of valuable species, solid fittings, qualified staff, the latest equipment and production technologies. Be sure to indicate the work of the designer in the development. Often this fact is able to quickly and permanently form a customer base. There are many connoisseurs of design work among potential clients. Moreover, who, if not a designer, constantly monitors the latest global trends in the furniture industry.

In addition to "black" and "gray" manufacturers, Chinese manufacturers of furniture and components remain your competitors. This is another serious niche in the furniture industry and occupies a significant place in the market. It is not worth underestimating such a competitor and not paying attention to him.

Companies representing a Chinese manufacturer are distinguished by fairly cheap offers, but not always of high quality. You can use the advantages in the form, quality, the possibility of an individual order according to the sizes specified by the customer in your advertising campaigns aimed at similar customers.

What are the options:
Manufacture of cabinet furniture;
Children's furniture;
Cushioned furniture;
Office furniture;
Bathroom furniture;

With any variant of the direction of production, advertising should meet the needs of a potential client as much as possible and attract his attention.

Types of advertising.
Advertising on billboards ranks first in terms of memorability. It is expensive, but at the beginning of the production path, business definitely needs it. Post information about yourself in several places, or at least in one, but the most effective. Advertisers own the intricacies of placements. Don't be afraid to trust them. It is in their interest to make your advertising effective.

The next step in promoting a business should be creating a company website or a professional landing page. This is a prerequisite. As Bill Gates said: "If your business is not on the Internet, then it does not exist at all."

Actively promote the site and the ledding on the network - this will add enough customers to the company.
Building a good website costs about $500. Form an accessible interface and make it understandable even for inexperienced users. Without fail, the site must contain information about the company, its data, contacts. Create a colorful eye-catching catalog and order button. Describe all the benefits of the proposals and customers will not keep themselves waiting long. Create a wide range of payment methods.

Take advantage of our printing services. Colorful booklets, flyers, business cards. These are mandatory advertising attributes for starting any business.

You can place information about the new company in the media. It is better if these are specialized publications. Don't skimp on the best seats - this is the first and last spread of the magazine. It's expensive, but justified by the result.

Create a beautiful catalog. It will be useful both to the manager and in several other sales options.

Sales of products.

As mentioned above, the sales manager will deal with the sale of products. It may be one or more. But the owner must be directly involved in the development of the action plan.

You have already implemented advertising that attracts a potential client to you. You can, of course, stop there and fulfill those orders that come to you from these sources.
But if possible, do not miss the opportunity to increase sales.

One of the best options is to open your own store. Better yet, a small network. If the production is located in a metropolis, then several districts of the city can be used for the operation of stores. If the production workshop is located in the region, the regional center is perfect. It can be a very small room, with an area of ​​​​20 square meters. You can place several types of products there and work according to the catalog.

Cooperation with furniture supermarkets can be called a very profitable type of sales. For young companies, this option is ideal. Because supermarkets fully ensure the operation of the workshop according to the entire price list provided by the production.

Undoubtedly, in such cooperation there are not only pluses, but also minuses. The main disadvantage is the clause in the agreement on exclusive rights to representation in those regions where supermarkets are located. That is, you will not be able to sell your products in parallel with them. The second minus is the price. All networks try to negotiate the lowest prices from the supplier and, by the way, they are not bad at it.
In principle, if you cooperate with them on the rights of exclusive sales, then this is not scary. They will not compete with you in terms of territory. And in the price you can enter any price that you agree on. A significant disadvantage of cooperation with networks is the payment by installments. This is a prerequisite for cooperation. If it is unacceptable for you, refuse and do not offer yourself as a supplier at all. Installments in different networks sometimes reach up to six months. But mostly three months.
Despite the disadvantages in working with such networks, they are justified by big pluses. A serious and undeniable positive point is the wide representation in many regions. As a rule, networks are very developed or rapidly developing and open their stores wherever possible.

Another important positive point is advertising through representation. Super- and hypermarket chains release their catalogs of seasonal offers. Catalogs are distributed free of charge. Thousands of potential customers will find out about you. Another plus of cooperation can be considered from the side of logistics. Customer demand will guide your production in the right direction. You will always be aware of new trends and bring new ideas in technology and design solutions.

Dealers.

These are the companies that will sell your products in their regions. This is a great way to promote and cover as wide an area as possible. The process of finding a dealer is similar to general distribution. Be sure to create a beautiful, viewable commercial offer. Describe the benefits, the proposed terms of cooperation and send it to all relevant companies. A sales manager can handle this very well.

The two methods described above are possible only if the status of your enterprise is not lower than LLC. Because the status indicates the seriousness of your intentions. It is rare when dealers agree to cooperate with companies of lower status. In this case, there is no need to talk about networks. They do not even consider such proposals.

Tenders.

No matter what kind of furniture you produce, there will always be customers who are potentially interested in your products. For example, if production operates in a resort area, these are sanatoriums, recreation centers.

If you simultaneously produce a line of children's furniture, these are kindergartens, various kinds of children's institutions that need constant furniture updates. Do not be afraid to declare yourself, participate in tenders. There are sites that specialize in collecting complete information about all ongoing commercial tenders separately for each region. Subscribe to the newsletter of such a site, connect industry and regional settings, and you will constantly receive all information related to this issue by e-mail. The information is constantly updated.

You will always be aware of the ongoing events in this area. The distribution is absolutely free.

You can unsubscribe at any time if you don't need it. Of course, it is up to you to make a decision, but you should not refuse such opportunities. Again, the status of an LLC can greatly help you with this. In addition, if you have a need for quality consumables for production, you can place your tender. Terms of participation and placement of tenders in the public domain. Do not miss any opportunity to make your business even more profitable.

Financial plan.

Investments.

It's time to carefully calculate the required investment.
Registration of LLC ______________________________________________ 110$;
Registration of TM in Rospatent ______________________________ 500$;
Rent of premises _______________________________________ 1000 $ / month;
Purchase of equipment ____________________________________ 40,000 $
Consumables __________________________________________ $40,000;
Advertising ________________________________________________ $10,000;
Office equipment ______________________________________________ 1000 $;
Taxes, salary _____________________________________________ 30% of profit;
Total at the start ________________________________________________ $ 100,000.
The total investment in the launch of the production workshop is about $100,000.

Payback.

The payback time of such an enterprise directly depends on the profit that you will receive as a result of the sale of finished products.

Even if we assume that the difference between the cost and the price of finished products is 100%, it will take more than one month and a year to pay back the invested funds. The production of the first batch of furniture, starting from development and ending with the date of receipt of funds from the sale, will take at least three months.
Summing up the monthly expenses and minus them from the profit received, it is clear that in order to pay off only the consumable material, at least two full-fledged sales of all products made from the entire batch of consumables will be needed.

Ideally, when the workshop is fully loaded and the finished product is fully sold, taking into account the installment payment for the products supplied to the buyer, it will take at least 8 months to pay back the consumables. And besides this amount, there is another $60,000 of invested money. If $ 40,000 paid off in 8 months, then the rest in proportion will pay off for another 2 years.

It can be concluded that the full payback of the invested $ 100,000 will occur no earlier than in 2.8 years or 32 months.

production options.
At your disposal are several options for the production of furniture and each of them is worthy of attention.

A very common type of business in the Russian Federation and beyond. This includes the manufacture of dressing rooms, wardrobes, wardrobes (a type that is very popular for its characteristics), children's rooms, hallways, etc.
The equipment that has already been described above is used. Therefore, it is not worth dwelling on this point separately. You can complement this list with an ultra-modern line of serigraphy. The equipment is designed for drawing patterns on PVC film. It is used as decoration in the manufacture of wardrobes, furniture for the kitchen, hallways, cabinets and many others.

Materials - laminated chipboard (laminated chipboard), covered with a decorative protective layer. It is used in the manufacture of furniture facades and cases.
PVC edge is a finishing edge based on polyvinyl chloride. The material has increased wear resistance, has a protective function of the ends of chipboard parts from various kinds of damage. Perfectly blocks the ingress of moisture on open material during operation.

PVC film is a film based on polyvinyl chloride. Are applied to vacuum and membrane pressing on facades. Advantages - heat resistance, withstands household scratching well, retains the original color well (does not fade). There are film materials with antibacterial and antifungal treatment provided.

MDF is a specialized ecological material, made from small dried wood fibers. Treated with binders. It has a finely dispersed structure over the entire cross section and is easy to machine, shape milling and various types of finishes.

The production process is in many ways similar to the manufacture of cabinet furniture. That is, children's furniture is also mostly cabinet. The same equipment and many similar materials are used.
A feature of furniture for children should be the use in the production of natural materials. You can use solid wood, MDF, veneer, chipboard or tambour. Metal, glass or plastic - from these materials you can also often find furniture for children. Without a doubt, the most suitable material for such furniture is solid wood. It is natural, environmentally friendly, durable. The tree is very difficult to process, so products from it are quite expensive, but it allows you to make real masterpieces of designer fantasy.

Children are subject to rapid growth. Therefore, the production of children's furniture is often profitable due to the increased demand for it due to frequent replacement. If you manage to secure even a few customers, this can be a good start for further development of children's furniture lines.

It is also worth adding that materials should be used that are easy to hygienically process the finished product. The reasons are clear - the health of the child is above all!

This is a separate category of furniture. Features of such production are in the widest range of finishing materials and design possibilities. Sofas and sofas, poufs and ottomans. Variety of chairs. In such production, design abilities will be able to manifest themselves in all their diversity.

According to GOST, the definition of "upholstered" furniture includes structural elements with flooring materials with a thickness of at least 20 mm.
base materials - boxes, panels and frames made of wood, plywood and fiberboard. The main element that gives the product softness are the springs. Snake springs, tapes made of rubber and rubber fabrics, tapes twisted from rubber threads in a cotton winding are used.

If it is planned to produce expensive upholstered furniture, then an elastic beam made of wood is used for the frame. If not, then you don’t need to invent a bicycle - materials such as plywood and chipboard are perfect. They are cheaper and easier to process. They are quite durable and there are no complaints about low quality.

To create soft elements, foam or polyurethane foam is used. What exactly to use is up to you. They differ from each other in production technology and density.
The upholstery uses both woven materials (natural and artificial fibers), and leather, leatherette. For the production of inexpensive upholstered furniture, it is not advisable to use leather as upholstery. Use fabric - it's cheaper, more practical and easier to process.

Nothing new can be added to the production moments. The process almost completely duplicates the described item “cabinet furniture”.

The only thing you can pay attention to is the simplicity of the manufacturing process. Easier not where. There are almost no decorative elements. Strict appearance. Classic colors of materials, a high level of convenience and practicality - these are the main criteria for office furniture.

In the manufacture should be used only high-quality materials. Mostly used chipboard, MDF, decorative plastic, glass and some others. But the use of metal is unacceptable. In conditions of high humidity, it will quickly begin to rust, despite any processing and preparation. The use of wood is also not desirable - it practically does not tolerate constant temperature fluctuations and high humidity in the room.

Under such conditions, wooden furniture quickly delaminates and warps. MDF and chipboard use special coatings that guarantee long-term operation. With the help of MDF, you can make furniture of almost any shape. This can even be called an advantage, because such furniture, in comparison with office furniture, is more suitable for design performances and experiments.

Another material that is used daily in the manufacture of bathroom furniture is plastic. He's not expensive. It is also convenient in reproducing various forms. But its difference from the MFD in a wide range of colors makes it a favorite both in production and in operation.
There are some fashion trends in the design of furniture, especially when it comes to glass products. This is arttoning and sandblasting drawings. All this is done with special equipment. To tint glass elements, a tinted vinyl film is used.

Sandblasting drawings are applied to glass using a stencil. Most often, the stencil material is used oracle. For the application of such decorative elements, sandblasting machines are used. You can apply drawings not only on glass, but also on mirrors and any other glass surface. On the Internet, there are entire catalogs of drawings for sandblasting in the public domain. There are so many of them that you can draw new ideas from there and not be afraid to be unoriginal.

Such furniture, too, for the most part, belongs to the cabinet. But production is easier due to the fact that the needs of a summer residence differ from a full-fledged residential building in their simplicity. We mainly produce various tables, chairs, shelves. Wall compartments, built-in and external, are very popular.

Popular due to their practicality in application. Easily mounted from a niche. At the peak of popularity are models in which you can mount a sleeping bed. For a day, it folds up, becomes almost invisible and frees up a lot of space for household chores. And there are quite a few such examples. In principle, such a business will always be relevant, but its seasonality may alert.

Manufacture of custom-made furniture.

As an additional service and increasing the interest of a potential client, the company needs such a service as the manufacture of furniture according to the size of the customer. A very relevant service for the simple reason that residential and commercial construction has long gone from the standards of layout, size and shape of premises. If you want more interest from customers, be sure to include this service in the general offer register.

Business development prospects.

In the future, when you fully recoup your investment, you can think about expanding the business. What could it be? For example, you can set up the production of consumables and furniture fittings (hinges, screws, self-tapping screws, nails, handles, films, laminate, and everything that production cannot do without. Of course, these are additional investments, but they will greatly reduce the cost of furniture. And this will directly proportionally increase the income and profit of the enterprise.

We wish you success and prosperity in this complex but creative business!

In this material:

How to start a furniture business from scratch? You can also meet enterprises that make furniture without equipment and some serious production facilities. But the consumer is already tired of cheap walls and tables, chipboard furniture, which falls apart after a few years. Now there are more requirements for the manufactured product. To meet them, you will have to open a full-fledged furniture production workshop.

Market Review

How to start furniture production? Before you open a furniture shop, tune in that small and medium-sized businesses in this area are characterized by specialization in something specific. You should not grab onto the production of everything in a row, but you should try to make every effort to gain a foothold in some narrow niche. This is a fundamental rule in the strategy of survival in the furniture industry. You can focus your efforts on your own production of the following furniture:

• case;
• soft;
• advertising;
• for trade organizations.

Advertising furniture is used to decorate points of sale and attract as many buyers as possible to a product or service. For trade organizations, such as shops, pharmacies, shopping centers, salons, special shelves and showcases are required, on which the assortment will be displayed.

Furniture manufacturing involves a large number of specializations. You can focus on assembling some products with limited functionality, such as, for example, euro pallets or computer tables, or you can make glass tables and cabinets, produce furniture from a certain material - plastic, natural wood.

Furniture manufacturing as a business does not mean only the creation of goods. Services for the restoration of cabinet and upholstered furniture are also popular. These services are especially in demand among citizens with a low level of income, and there are a lot of such people in the country. The opposite direction is the restoration and restoration of antiques. In this case, the services will be in demand in regions that are economically developed.

An unoccupied niche in this market is the production of wicker furniture. It can be mastered by a small enterprise, however, wicker chairs, sofas, cabinets continue to be imported from abroad, leaving them in the high price segment.

An excellent specialization for small and medium-sized businesses is built-in furniture. In this case, an individual approach to each client is required. Large enterprises cannot meet the individual requirements of customers.

To understand whether it makes sense to start a furniture manufacturing business, pay attention to the development trend of related fields. If the real estate market is developing, foreign cars are being purchased, the market for antiques and advertising services is developing, and this dynamics can be observed in the next two or three years, you can start in this direction. On the other hand, there will always be demand for furniture: after its decline, the upward trend returns very quickly.

Organization of production

Where to start making furniture? Once you have decided on a specialization, you need to find a suitable room. The minimum required area that will be required is 200 m 2. Its rent will cost 1300-6500 rubles a year for 1 m 2. This range of prices depends on the region.

In Moscow and St. Petersburg, you need to tune in to the cost of 1 m 2 at 5-6.5 tons. per year, and in regions, especially economically undeveloped, it is quite possible to count on the lowest prices. The average figure is 3300 rubles per year for 1 m 2. Total rent will cost 650-660 thousand rubles. in year. If you manage to get a room for a long-term lease cheaper, it will be very good.

For equipment, depending on the specialization, you need to spend from 350 thousand rubles. up to 1.5 million rubles. This is without taking into account the purchase of office equipment, software, a truck, by which the furniture will be delivered to the consumer or to points of sale. You can buy both standard machines and entire production lines that are made to order.

Pay attention to the purchase of quality components. Please note right away that it is impossible to produce furniture that will be of high quality and competitive, while relying only on parts and accessories of domestic production. We will have to establish contacts with distributors of foreign companies that offer everything necessary for the production of furniture.

Decide in advance and make a list of component suppliers, conclude supply contracts:

• MDF boards;
• laminated boards;
• films on plates;
• paintwork materials;
• accessories;
• aluminum profiles;
• sliding systems.

At the initial stage, it is necessary to duplicate suppliers for each position. Diversify the assortment so that there is not only the production of furniture from chipboard. During the work, some of them will be eliminated, cooperation will continue only with some of them, which turned out to be reliable and profitable in the price range.

The next issue is staffing. The level of training of employees should be high, but it also requires high pay. You can organize your own training in the specialty, if you have the experience and qualified personnel for this.

The staff of the furniture workshop should include:

• master;
• assembly fitter;
• joiners;
• glazier.

The production workshop can be from 10 to 50 people, depending on the volume of production.

In addition to them, you also need:

• driver;
• Sales Manager;
• courier;
• storekeeper;
• designer.

The total payroll fund (payroll), if there are no more than 15 employees, is from 350 thousand rubles.

These calculations are valid for the general case. Depending on the specialization and scale of the region, they can change both downward and upward. For example, for economically underdeveloped regions, the wage fund will decrease, but for Moscow and St. Petersburg it will increase several times. Consider specific examples in the niches for the production of cabinet and upholstered furniture.

Production of cabinet furniture

The production technology of cabinet furniture includes the following:

• preparation of a project of a conceived product in different planes;
• work on cutting materials, the formation of details of the future product;
• work on drilling holes and sockets for fasteners;
• works on facing cut edges;
• final assembly of finished furniture.

This process depends on how automated it is. It is believed that the use of CNC machines reduces the percentage of manual labor, increases the automation of the process. The operator of such a machine only needs to enter the size data into the program, create the required product, and after starting the machine, it will cut out everything that is needed in a few minutes. This method of manufacturing is considered advanced and high-tech.

The disadvantage of such production is that constantly reconfiguring the program for an individual order is considered an unprofitable exercise. Therefore, the use of CNC machines is not suitable for working with individual orders. The best option is the organization of furniture production on several machines, which form a semi-automatic line with combined manual labor.

For such a furniture manufacturing workshop, you will need to purchase the following equipment and tools:

• panel saw with manual feed of materials;
• edge banding machine, with which rectilinear edges, concave and convex elements are lined;
• drilling and filler machine, which allows you to make holes - both deaf and open;
• grinding machine;
• screwdrivers and perforator;
• cutters, drills, knives.

With all this, you can count on the simultaneous monthly release of 100 units:

• cabinets;
• tables;
• pedestals;
• shelving.

Only 400 units of finished products. The expenses must include:

• for materials;
• for electricity,
• for advertising;
• for depreciation.

In addition, the cost of furniture production is formed by payroll and rent. The payroll together with taxes on wages is about 400 thousand rubles, rent - 50-55 thousand rubles. The cost of 400 of these products will be about 500 thousand rubles.

The cost of a table or cabinet varies from 2.3-3.3 thousand rubles, and the cost of cabinets and racks - 3.5-5 thousand rubles. Approximate income will be - 1160-1660 thousand rubles. The profit will be 590-1060 thousand rubles. per month. This is the perfect calculation. To get real numbers, the final values ​​can be divided in half, even if labor efficiency is high.

Production of upholstered furniture

The need for upholstered furniture among the population forms one sixth of the entire furniture market, which makes this niche very promising and attractive for both medium and small enterprises.

There is a trend towards making sofas and armchairs to order, which enables small enterprises to successfully compete with large industries that will not chase an individual customer. It is just convenient for small and medium-sized businesses to produce small batches of armchairs and sofas.

For small and medium-sized businesses, this niche is also attractive because it does not require the purchase of expensive equipment.

The main operations are performed manually. Finally, such small and medium-sized businesses easily adapt to fashion trends and are ready to quickly fulfill an order, even if the novelty has just appeared on the market. For this, the factory needs a quarter to transfer the equipment and the technological process to the production of some specific models. A small workshop can only provide the customer with a whole line of models due to combinations of upholstery, accessories and material, thereby benefiting from exclusivity.

Its production of upholstered furniture requires the purchase of the following machines:

• combined - for wood processing;
• edged multi-blade;
• turning;
• milling;
• trimming;
• grinding.

Their total cost is 150-160 thousand rubles. In addition to machines, you will need drying equipment and pneumatic clamps, as well as hand tools, a sewing machine and cutting tables. This is another 40 thousand rubles. In total, the technology for the production of upholstered furniture will require about 200 thousand rubles for equipment and tools.

In addition to equipment for the production workshop, it will also be necessary to purchase office equipment - office equipment and furniture with a total cost of 60-90 thousand rubles. This equipment allows monthly production of up to 100 sofas, each of which can be offered for sale at a price of 7.5 tons. The income of the enterprise will be from 750 thousand rubles.

The cost of own production of upholstered furniture is:

• FOT - 150-250 thousand rubles;
• rent - 50 thousand rubles;
• materials - 150 thousand rubles;
• electricity, utilities, internet, communications - 20 thousand rubles;
• advertising - 30-50 thousand rubles;
• unforeseen expenses - 40-60 thousand rubles

Total total production costs are 440-580 tons. The profit of the enterprise before taxes is 170-310 thousand rubles, and after - 160-290 thousand rubles. The real value of profit will be 1.5-2 times lower. The average payback period for investments in equipment and tools in this type of activity, if the efficiency is high, is considered normal from 4 months.

Take into account the production of facades. The number of enterprises that specialize in this is growing every year, but many manufacturers do not have high quality products. Buyers are ready to spend more money on high-quality facades, therefore, if the emphasis is on product quality, and does not seek to reduce costs due to it, then the production of facades can turn out to be a very profitable enterprise.

It will take 1.5 million rubles to open its own production. One piece of equipment, its purchase, delivery and installation will cost 1 million rubles. It is also necessary to provide for the purchase of raw materials for a month of furniture production, which will cost another 250-300 thousand rubles.

One person can work on the equipment, so the payroll will be small. In a month, such a furniture production workshop produces 400-500 m 2 of MDF facades. The cost of 1 m 2 reaches 1 tr. The income of such an enterprise is 400-500 thousand rubles. Expenditure - up to 200 thousand rubles. The initial investment will pay off in 8-12 months.

What to focus on?

How to organize your furniture manufacturing business in order to achieve high labor efficiency? First, safety precautions must be followed. Second: the staff should have a personal interest in high and quality production. Therefore, establish that the salary is formed from a fixed rate and a percentage for the work performed, and marriage is calculated from the salary. This will raise the interest of workers and improve labor efficiency.

After the work is established in the workshop, engage in an active search for customers. You can sell products both through retail chains in your city and in other cities.

It is very good if you have your own online store for the sale of manufactured furniture. If you invest in its promotion and contextual advertising, it allows you to increase sales several times, while advertising costs will be low.

Order a business plan

	Investments: Investments 350 000 ₽ The company, as a furniture manufacturer, was founded in 2009. Today it is a dynamically developing manufacturing enterprise. We produce more than 20 thousand products per month. Over 100 stores. The furniture half-price brand was created in 2014 for a retail chain of furniture stores in the format of a furniture discounter. In the same year, the first store was opened. As expected, the project...
	Investments: Investments 1 000 000 - 2 000 000 ₽ In 2016, the company launched the automated production of the First Furniture Factory-ALNO joint venture, rebranding the factory, a new model range for various segments and the premium kitchen brand Bruno Piatti. A joint venture with the Piatti Factory has made it possible to produce kitchens according to Swiss quality standards. To date, the First Furniture-ALNO is: -52,000 m2 of production and storage space. - Capacity -50000 sets of furniture...
	Investments: From 500,000 rubles. We will reimburse 50% of your costs for the repair and decoration of the store. Low investment risks. 40% of investments are exhibition samples, which remain a liquid asset in case of problems. Any business starts to make a profit. With frendom sofas from business, you will also get a lot of positive emotions. Selling this furniture is a pleasure! Your partner is a manufacturing factory, whose history begins in 2006 in the city of Engels, Saratov region. The company is a permanent participant of international exhibitions. Residents of eighty-nine regions of Russia and neighboring countries ...
	Investments: Investments 3 350 000 - 5 500 000 ₽ New Chicken is a new project of the BCA restaurant holding, which has the experience of opening more than 150 establishments in 8 countries of the world. The company is actively growing, developing new directions and knows what the consumer needs tomorrow. The company promotes a network of establishments on a franchising model. Description of the franchise The franchise package includes: production / trade / assembly equipment, furniture The New Chicken franchise has…
	Investments: Investments 600,000 - 1,200,000 ₽ The network of hostels "HiLoft" is a project that meets the high standards of the international association Hosteling International. Our hostels reflect the eco-friendly concept of Hosteling International: * Provide a framework for maintaining and continuously developing social and cultural bonds within the community. * Contribute to the popularization of safe - tourism that does not harm the environment. * Contribute to the development of accessible tourism. We provide hostels of our franchisees with high occupancy in…
	Investments: Investments 2 700 000 - 3 500 000 ₽ We are a team of professionals with over 10 years of experience in the food market. During this time, we have implemented more than 40 regional and federal projects in 15 different concepts. In 2017, we launched the Bakery No. 21 project and now we manage a network of bakery cafes, which we want to expand, because we believe that our product is a new level in the world…
	Investments: Investments 499,000 - 1,500,000 ₽ The Avista Module Engineering group of companies has been innovating and creating trends in the prefabricated construction market for 11 years. Founded by Kulubekov Vadim Ravilevich. The company specializes in providing comprehensive services for the design, production, delivery, construction and assembly of prefabricated buildings for administrative and industrial purposes. Products are manufactured at a plant in Novosibirsk. The company's product range includes collapsible cabins, modular dormitories, modular canteens,… Franchise Investments: Investments 670,000 - 1,400,000 ₽ ICE BOX LLC was founded in Tolyatti in 2015 and started its activity as a natural homemade ice cream delivery service. The main advantage of the brand is a 100% natural composition, excluding the presence of any dyes, flavors, factory pastes, vegetable fats and E-components. IceBox ice cream is made exclusively from fresh farm cream and milk, natural berries, fruits, nuts,…
	Investments: Investments 330,000 - 376,000 ₽ The network of Sharpening Centers "TSEKH" is one of the leading networks in the field of sharpening and selling hairdressing and manicure tools. Working directly with all the leading manufacturers of hairdressing and manicure tools, we provide our franchisees with the best prices for stores at the TsEKH Sharpening Centers. Also, "TSEKH" is the official dealer of many manufacturers of grinding equipment, thanks to which, our…	Investments: Investments 1 500 000 - 10 000 000 ₽ FinLine brand Avtopawnshop, founded in 1999 and is one of the market leaders in the segment of secured lending and investment, the main specialization of the company is loans secured by liquid assets: vehicles, titles, real estate, equipment and precious metals. For nineteen years of work, we have learned how to manage and scale the pawnshop business as efficiently as possible and now we are ready to share our…