Every gardener dreams of making his garden well-groomed and beautiful. But it is much easier to cope with the task of landscaping than with its decoration, because garden decor is not cheap and does not always look appropriate. Yes, and why the extra spending, if the material for the original craft is right at hand. In this article we will tell you how to make a real masterpiece out of a plastic bottle and what you need in order to make a truly exotic decoration for the garden - a palm tree.
Crafts for giving, what you need to create a palm tree
A plastic bottle is a practical and multifunctional thing with which you can turn your garden into a "decorative museum". Anyone who says that this is “garbage and bad taste” simply has not seen really good DIY garden crafts. Hand-made is not only fashionable, but also in demand, because what is done with one's own hands is valued many times higher than factory items.
In fact, there are a lot of inexpensive and affordable materials for country crafts. But among them, plastic bottles are leading in terms of practicality, durability and unpretentiousness.
Decorative elements for the garden, made of plastic bottles, not only attract admiring glances with their non-triviality, but also have an unlimited shelf life - they are not afraid of either snow or heat.
Did you know? The plastic container maintains temperature range from -40 °C to +200 °C.
In addition, plastic bottles are like plasticine in the hands of a sculptor - malleable, elastic, and allows you to do almost everything with yourself.
In order to make a palm tree from bottles, you will need:
- plastic bottles of several colors;
- sharp knife (clerical or construction) and scissors;
- adhesive tape and / or construction glue;
- barrel base (metal pin or hollow plastic tube);
- strong rope;
- wire.
Instructions for making leaves
At first glance, it may seem that making a tree from plastic bottles with your own hands is very difficult. But if you act in stages, it turns out that it is not only easy, but also very exciting.
First of all, let's start making the crown of a palm tree. Take a plastic bottle and cut off the bottom, about 1/3 the length of the bottle. The bottom will no longer be useful, and the part with the neck will become a blank for foliage. Palm leaves can be of two types: fluffy and tulip-shaped. In the first case, using a clerical knife or scissors, we make longitudinal cuts towards the neck, without cutting 3-4 cm to it. The width of the strips can be arbitrary, but the crown of small leaves looks most spectacular.
The second version of the leaves is made in the following way: the blank is cut into four equal parts (cuts towards the neck of the bottle); we bend each of the parts and with the help of scissors we give the shape of a needle-shaped, figured sheet.
How to make a palm tree from bottles, the first or second way - Decide for yourself, it's a matter of taste. Ready leaves will need to be collected into a branch. To do this, take a rope or cable and alternately string all the workpieces in one direction so that the neck enters the cavity of the previous bottle. About 5-7 finished blanks will take one branch of a palm tree. Be sure to screw the cork onto the neck of the first “sheet” - this is necessary to fix the rope. Remember to leave a long edge so that you can collect all the branches together later.
Important! If you have a child, and the palm tree will be within his reach, then the edges of the slices of plastic bottles should be melted so that the baby does not get hurt.
How to create a trunk for a palm tree
We proceed to the next stage of making palm trees from plastic bottles - stem assembly.
The trunk of a palm tree can also be made in several ways, and here are some of the best ones:
- We take a plastic bottle with a volume of 1.5-2 liters and cut off the bottom. We do the same procedure with all the bottles prepared for the palm tree trunk. We insert a metal pin into the place where the palm tree will “grow” from now on, and fix it securely.
Then it's a matter of technique: we tightly fit the plastic parts of the future tree trunk onto the pin with the neck up. And so to the very top of the trunk. If you want to make a more curly trunk for your palm tree, then you have to work a little. First, you will need bottles with the same figured bottom. Secondly, prepare as many bottles as possible - they will take a lot.Take a bottle, scissors and cut out the bottom so that all its “convex” parts remain on the workpiece. The cut edge will resemble a flower bud. Then make longitudinal cuts towards the neck 2/3 of the bottle long. After that, divide the flower into petals, slightly bending them at the edge of the cut. The first blank is ready, the next ones are in line.
When all the bottles are ready, we assemble a palm tree pole, stringing each element on a fixed metal rod. In contrast to the previous method, in this case, the stem blanks are pushed upside down.
- But that's not all the ways to make a palm tree out of plastic bottles! For the next option, we do not need a metal rod, and as a decor, that part of the bottles that used to be scrapped - the bottoms - will come in handy.
The basis for the trunk will be an even log, peeled from the bark. Along its entire length, we fasten the bottoms of the bottles with self-tapping screws, with the figured side out. As a result, you have a beautiful trunk of a future decorative palm tree.
Did you know? One of the record holder palm trees is an ornamental tree, the trunk of which reaches 4.5 m in height.
Connection of the trunk and crown of an evergreen tree
The final step in assembling your craft will be the connection of the finished parts: branches and trunk. This is a very important and crucial part, because the stability of the entire structure depends on how correctly everything is done. We will tell you how to make a tree from plastic bottles safe and reliable.
It is no secret that empty plastic containers for various drinks cause a lot of inconvenience with disposal, as they do not decompose for many years. And the disposal of this kind of garbage will cost too much.
Modern summer gardeners use PET bottles not only to store water and other liquids. After all, you can use it in a very interesting solution: to build a unique palm tree from bottles with your own hands on a personal plot, which will undoubtedly attract the curious glances of passers-by.
The manufacturing process will require only the usual set of tools, skill and excellent mood.
Benefits of PET containers: a beautiful palm tree
Do not rush to throw away empty plastic bottles, they can easily be turned into a unique evergreen palm tree that flaunts in a summer cottage. You can also improve the courtyard near the house, the playground, while profitably utilizing a sufficient amount of waste.
Before you make a palm tree from bottles, you should stock up on used containers of brown (for a tree trunk) and green (for leaves) color. It is better to take a container of 1.5 and 2 liter volume. The height of your southern "beauty" directly depends on the number of accumulated bottles.
A set of the following tools and parts will come in handy:
- sharpened scissors and knife;
- scotch;
- a cord or braided wire that will hold the foliage;
- plastic pipe, or iron fittings for the base of the palm trunk.
It is important to consider that the aesthetic appearance of the future tree depends on containers of the same diameter. But the combination of different shades of green will only give the palm a bright, unique look.
Step by step work
Foliage Assembly
For prepared green bottles, it is necessary to cut off the bottoms with a knife, and the top one will just be a leaf blank. The remaining part is carefully cut into strips with scissors, heading towards the neck of the bottle. Keep in mind that the thinner the cut strips are, the more magnificent the crown of the palm tree will turn out.
We do this until we get the right amount of foliage, which then needs to be strung on a tight rope, cord or wire. It is necessary to screw the lid on the first and last parts to further create the petiole of the leaf.
tree trunk assembly
For brown bottles (at least ten pieces), we cut off only the bottom, then we make longitudinal cuts of the same size right up to the neck of the bottle - these are the petals of the trunk. It is better if you get six equal, fairly wide strips along.
The finished trunk is assembled in the same way as the crown of a tree (bottle stem blanks are strung on the base), as shown in the photo of a palm tree. The base of the tree is carried out using a metal or plastic pipe of the desired length and diameter.
The prepared crown of the palm tree is fixed with glue or tape to the crown to get a uniform fluffy foliage.
It is worth considering that the finished craft will not be easy at all, which is why it is reasonable to take a heavy base for the trunk, which is dug into the soil for half a meter, or poured with concrete.
A beautiful evergreen palm tree made from empty plastic bottles, which brings warmth in both winter and summer, is ready! In such a simple way, it is possible to independently create a paradise southern corner in a free garden area.
If you turn on the scope of your imagination, you can erect coconut fruits on a finished palm tree. You can implement this idea from a contrasting shade of bottles, or small juice bottles, which will undoubtedly delight children who will frolic near the tree.
Summer residents who spend the summer in their gardens face the problem of recycling plastic containers from all kinds of soft drinks by the fall. A plastic bottle palm tree can be an unexpected way to turn trash into a garden ornament.
How is this possible? It’s very simple if you carefully study the instructions for making palm trees from bottles, prepare all the necessary tools, supplies, and be sure to stock up on a good mood.
Bottle palm tree: possible benefits and methods of application
As you know, the plastic used for the production of food packaging does not decompose for hundreds of years when it enters the soil. Centralized removal of this kind of garbage is not established everywhere, and no one wants to litter nearby territories with plastic waste. What should a summer resident do in such a situation? Is it really necessary to carry used plastic bottles to the city?
Don't rush! If you carefully collect bottles of brown and green plastic, in the off-season, the whole family can turn this container into an unusual evergreen tree in an evening.
A palm tree from bottles will perfectly decorate:
- house territory;
- unsightly corner of the garden;
- plot next to outbuildings;
- playground;
- a border of land near an open .
A palm tree made from plastic bottles according to the instructions below can be a spectacular decoration at any party, wedding, theme party or children's party.
Making an original decor item will not cause difficulties even for people who are far from this kind of creativity. The main thing is to prepare everything you need before making a palm tree out of plastic bottles.
What is required for a palm tree from plastic bottles?
What should be stocked up before starting work? First of all, the home master will need green and brown plastic bottles. Green ones are blanks for the foliage of a tree, and brown ones are the future trunks of an evergreen beauty. At the same time, the height of the plant and the splendor of the crown directly depend on the amount of collected containers.
The list of necessary materials and tools for creating a palm tree from bottles includes:
- plastic container;
- sharp clerical knife and scissors;
- strong tape;
- metal bar or plastic tube for the barrel;
- thick rope or braided wire for the base of the leaves.
When choosing plastic bottles for palm trees, you need to take into account that trunks and leaves made from containers of the same diameter look better. If there are smaller green bottles in stock, they can be used for leaves in the middle of the crown, but brown small vessels will have to be used for tree trunks of a different type or size. Different shades of plastic are not a hindrance. They will only give the man-made plant liveliness and brightness.
Bottle palm tree: instructions for making
A step-by-step description of all the intricacies of creating a plastic tree will help you quickly, literally in an evening, step by step a palm tree from plastic bottles of the intended height.
The process consists of three steps:
- leaf assembly;
- creating a trunk of a plastic plant;
- connection of all parts and installation of the finished tree.
Before making a palm tree out of plastic bottles, the container must be washed and all paper and film labels removed from it.
Although there are a lot of options for creating a plastic tree, the most lush long leaves with any chosen method are obtained from large, for example, two-liter bottles.
Making a palm tree crown from bottles
For prepared green bottles, the bottom part is cut off with a clerical knife or scissors. It is no longer needed, and the upper half will become a blank for the sheet.
It is carefully cut into thin longitudinal strips towards the neck. The larger the diameter of the plastic bottle, the thicker and more magnificent the green palm leaves will turn out.
These are not the only option for creating leaves. If you cut the top of a plastic bottle, as in the photo, into four “petals”, and then cut each of them several times, you will get beautiful feathery foliage.
The resulting leaf fragments are sequentially strung on a strong rope or a strong electrical cable. A lid is necessarily screwed onto the first blank in order to fasten the “petiole” of the sheet at the top with a knot. The last part of the bottle is twisted in the same way.
A palm tree made of plastic bottles can have a top of any size, but trees with a crown of at least 5-7 leaves look better.
At the base of the finished palm leaves there should be a long stalk in order to assemble and securely fix the entire structure later.
Assembling a palm tree trunk from bottles
To get a tree trunk that looks like a natural tree, you will need almost the entire bottle, except for the bottom itself.
From the bottom, almost to the very neck, longitudinal cuts are made on brown bottles, dividing the container into equal petals.
Only a small fragment of the bottom goes to waste
This is how the finished part of the future palm trunk from bottles looks like.
The assembly is carried out in the same way as the green leaves of the tree were collected. To secure a palm tree in an upright position, its trunk will need a strong, rigid core. It can be made from a metal bar of suitable length and diameter or a tube.
Assembling a palm tree from plastic bottles
Finished palm leaves are attached with glue or adhesive tape to the top of the tree so that they form a uniform, diverging crown on all sides.
This is what the top of the tree looks like.
The structure is quite heavy. Therefore, it is desirable to fix it with such a heavy base. If there is no possibility or suitable material to make a welded platform, the rigid plastic or metal base of the stem is buried at least half a meter. Such a kind of "root" in the pit is strengthened with brick chips and compacted after filling with soil. Large trees are better to be concreted.
A video on how to make a palm tree for a personal plot out of plastic bottles will explain all the nuances of the creative process, help you turn a yard or garden corner into a real oasis with your own hands.
One of the options for making palm trees from bottles - video
A spectacular and eye-catching palm tree from bottles will serve as an excellent option for decorating a summer house, garden plot, playground in the yard or kindergarten. Made by hand according to a simple scheme, it will not only decorate the surrounding area, but also help a person to dispose of a large number of plastic containers.
How to make a palm tree from bottles with your own hands
Those who like to realize the most incredible fantasies will like a master class on how to make a palm tree from plastic bottles. For a tree, dark brown containers are suitable as stem blanks and green to make leaves. If there is no green container, it can be replaced with a variety of colors: blue, yellow, red. For trees, containers from kvass, carbonated sweet drinks or beer are useful.
The principle of creating a palm tree differs depending on what the craftsmen found. To form the trunk, you can use a round support made of wood, where the bottoms are nailed, or a cable with wire is suitable, where containers with cut bottoms will simply be strung. Leaves differ in splendor and length. If you want to get palm fans, then they are cut, notched and bent, and the elongated leaves are strung on a cable.
The area of the leaves and the trunk depends on the size of the bottles, but you should not get carried away and use a 6-liter or 20-liter container from under the water. A tree from 1.5 and 2-liter plastic containers of different colors looks much neater. Corks from them will also serve as a material for decoration - they decorate the base of a palm tree, you can make a mosaic out of them for flower beds, walls of houses for children.
How to make palm leaves
To get a spectacular palm tree with your own hands, you need to pay attention to the manufacture of its leaves. To make them, you need:
- Cut the green bottles in half with scissors, cut the upper part into longitudinal strips so that the neck of a narrow diameter remains intact half a finger from the lid. The thinner the cut strips of plastic, the more magnificent the crown turns out and the more natural it looks in the photo.
- Taking containers for leaves is not necessarily the same - this will not affect the appearance. The resulting blanks must be strung on a prepared hard high-voltage cable with a diameter slightly less than the neck to obtain one lush sheet. The number of leaves varies according to the prepared holes on the metal pipe used as a support. Then they should be fixed on the stem blank.
Step-by-step instructions for making a bottle palm trunk
The next detail in the question of how to make a palm tree from plastic bottles will be the trunk. Step-by-step instruction:
- The trunk is made from dark brown dense containers, from which the bottom is cut off right along the contour.
- Then the resulting workpiece is cut to obtain segments bent inward, serving as an imitation of a tuberous trunk. Cut them should be 2/3 of the height, without affecting the top.
- It is worth making the required number of segments depending on the desired height of the plastic palm tree.
- When all the blanks are ready, you need to string them on metal tubes. To do this, the container with its neck down sits on another with a slight shift to obtain a beautiful tuberous trunk. The principle of stringing is similar to making a cone. After that, all parts are fixed.
Connecting individual parts and installing a palm tree on the site
The last step on how to make a beautiful palm tree from plastic bottles is to connect all the blanks together. What should be done:
- Prepare a rigid, solid base from a metal sheet approximately 40 * 60 cm in size and at least 5 mm thick to support the weight.
- 2 metal rods with a length of 25 cm or more should be welded to the base or holes should be made with a drill for fixing. They need to be put on metal pipes of the desired height - this will be the base of the tree. At the same time, the diameter of the pipes is left slightly less than the neck of the bottles for the barrel.
- The upper part of the supports will outwardly resemble a revolver drum; for this, 6-7 pipe sections are welded onto them. Bottles for the barrel must be assembled on rods, and palm leaves are inserted into the holes of the "revolver". For fixing, the cable inside them is bent, fixed from the side of the top and inside the neck of the outermost bottle. For the stability of the bottle structure and hiding the ugly lower part, the base is buried half a meter.
To create a mini bottle palm tree that would decorate a room in an apartment, you will need the following principles:
- The barrel must be done as follows: cut off a third of the bottle from the neck, cut out 8 triangle petals on each part, without affecting the neck by half a finger. Each segment turns outward to obtain scales. The second half is used in the same way to save money, but first the desired hole is punched in it with a hot knife.
- Wide fan leaves can be made as follows: cut off the bottom from a 1.5 liter plastic bottle, divide the side part into 3 parts without affecting the neck. Give the segment the shape of a petal by rounding at the end and narrowing at the throat. Unbend outward, cut the parts on both sides, form a fringe so that the uncut middle remains up to 1.5 cm wide. For splendor, manually shape each strip, bending up and down in sequence.
- Make the assembly in the same way as a large palm tree, only use a simpler base.
Video
A palm tree made of plastic bottles will take its rightful place on your backyard and will delight the eye at any time of the year. Making a plastic tree is not difficult, the main thing is to find a sufficient amount of material. We offer step by step instructions for beginners how to make a palm tree from plastic bottles.
Step by step guide: How to make a plastic palm tree
First you need to prepare the materials. You can use brown and green bottles or clear ones and then paint them. You will need:
- Plastic bottles of various sizes
- Wooden stick or reinforcement for the frame
- Tight rope or wire.
Conditionally palm making can be divided into three steps:
- Making palm branches
- Creating a tree trunk
- Combining all parts into one tree.
Step 1 . To keep the leaves wide, use two-liter green bottles. To do this, cut off the bottom of the bottle and cut the bottle lengthwise into 7 pieces. Give each leaf a suitable shape and make a fringe. For one leaf, you will need about 10-15 bottles. Connect them through the neck with a rope or wire. You can make small cuts along the bottles, then the leaves are more fluffy.
Step 2 To make the tree trunk, you will need brown beer bottles. Now you have to cut off the neck, and work with the lower half-bottom. Make triangular cuts on each blank from the bottle, then gently bend the edges outward. In the center of the bottom, you will have to burn a hole with a heated metal rod, the diameter of which depends on the diameter of the base for the frame. The number of bottles depends on the desired height for your tree. Insert them one into one on the frame, and you get a trunk.
Step 3. Now you can proceed to the full assembly of the tree. If you strung the leaves on a metal cable, then you can simply weld them to the trunk. To prevent the palm tree from flying away, make a foundation and dig deep into the core-trunk. Try to make a small palm tree first, and then plant some more plastic trees next to it.
Palm tree from plastic bottles
Imagine, then your tree will be unique, and the site will be the most beautiful. Involve family members in the preparation of blanks for palm trees, then you will spend interesting leisure time together. We hope that our article is about how to make a beginner palm trees from plastic bottles was useful and your backyard area will change significantly.
