Heat exchangers TRANTER at the manufacturer's price with delivery in Russia and the CIS! Collapsible plate heat exchanger GC and GL Plates

Demountable PHEs are used in the operating temperature range from -20° to +190° C and operating pressures from 10 to 25 bar. The design of the heat exchanger is based on a modular principle: standard elements can be connected in various combinations, which allows, if necessary, to change the operating parameters of the equipment.

Depending on the substances used as a heat carrier, the heat exchanger plates can be made of acid-resistant stainless steel, titanium, nickel alloys. Seal material: NBR, EPDM, VITON, FLUOR, etc.

Peculiarities:

• High efficiency;
• Compactness;
• The ability to work at a very small difference in flow temperatures (less than 1 o C);
• The ability to "self-cleaning";
• Plate heat exchangers are easily disassembled for inspection, cleaning and maintenance. It is possible to change the parameters of the heat exchanger by increasing or decreasing the number of plates.

Size range

Swep Plate Heat Exchanger- universal device. The same type model of the heat exchanger can have a different number of plates depending on the technical conditions and the task being solved.

If the initial parameters are unknown, contact the ProTeplo consulting engineers:

GC-008 P Swep heat exchanger with DN 32 mm. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GC-008 S is a Swep heat exchanger with DN 32 mm. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

Heat exchanger GC-016 P Du50. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GC-026 N is a Swep heat exchanger with DN100. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GC-026 P is a Swep heat exchanger with DN100. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GC-026 S is a Swep heat exchanger with DN100. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GC-051 N is a Swep heat exchanger with DN150. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GC-051 P is a Swep heat exchanger with DN150. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GC-051 S is a Swep heat exchanger with DN150. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GC-054 N is a Swep heat exchanger with DN150. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GC-054 P is a Swep heat exchanger with DN150. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GC-060 P is a Swep heat exchanger with DN200. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GC-060 S is a Swep heat exchanger with DN200. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GL-013 P is a Swep heat exchanger with DN50, 60. A device with which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GL-013 S is a Swep heat exchanger with DN50, 60. A device with which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GL-085 N is a Swep heat exchanger with DN300. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GL-085 P is a Swep heat exchanger with DN300. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GL-085 S is a Swep heat exchanger with DN300. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GL-145 N is a Swep heat exchanger with DN300. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GL-145 P is a Swep heat exchanger with DN300. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GL-145 S is a Swep heat exchanger with DN300. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GL-205 N is a Swep heat exchanger with DN300. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GL-205 P is a Swep heat exchanger with DN300. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GL-205 S is a Swep heat exchanger with DN300. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GL-230 N is a Swep heat exchanger with DN450. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GL-230 P is a Swep heat exchanger with DN450. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GL-230 T is a Swep heat exchanger with DN500. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GL-265 N is a Swep heat exchanger with DN300. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GL-265 P is a Swep heat exchanger with DN300. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GL-265 S is a Swep heat exchanger with DN300. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GL-325 N is a Swep heat exchanger with DN300. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GL-325 P is a Swep heat exchanger with DN300. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GL-325 S is a Swep heat exchanger with DN300. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GL-330 N is a Swep heat exchanger with DN450. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GL-330 P is a Swep heat exchanger with DN450. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GL-330 T is a Swep heat exchanger with DN500. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GL-430 N is a Swep heat exchanger with DN450. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GL-430 P is a Swep heat exchanger with DN450. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GL-430 T is a Swep heat exchanger with DN500. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GX-026 N is a Swep heat exchanger with DN100. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GX-026 P is a Swep heat exchanger with DN100. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GX-026 S is a Swep heat exchanger with DN100. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GX-042 N is a Swep heat exchanger with DN100. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GX-042 P is a Swep heat exchanger with DN100. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GX-042 S is a Swep heat exchanger with DN100. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GX-051 N is a Swep heat exchanger with DN150. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GX-051 P is a Swep heat exchanger with DN150. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GX-051 S is a Swep heat exchanger with DN150. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GX-060 P is a Swep heat exchanger with DN200. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GX-060 S is a Swep heat exchanger with DN200. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GX-085 N is a Swep heat exchanger with DN300. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GX-085 P is a Swep heat exchanger with DN300. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GX-085 S is a Swep heat exchanger with DN300. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GX-091 P is a Swep heat exchanger with DN150. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GX-091 S is a Swep heat exchanger with DN150. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GX-100 P is Swep's DN200 heat exchanger. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

GX-100 S is Swep's DN200 heat exchanger. A device by which heat is transferred. Two media are involved in the process: consumer (cold side) and coolant (hot). The device allows the energy exchange of substances without mixing - the interaction takes place through the plates, which are sealed with sealing gaskets made of heat-resistant rubber. Application: heating, hot water supply, pasteurization, recuperation.

Demountable PHEs are used in the operating temperature range from -20° to +190° C and operating pressures from 10 to 25 bar. The design of the heat exchanger is based on a modular principle: standard elements can be connected in various combinations, which allows, if necessary, to change the operating parameters of the equipment.

Depending on the substances used as a heat carrier, the heat exchanger plates can be made of acid-resistant stainless steel, titanium, nickel alloys. Seal material: NBR, EPDM, VITON, FLUOR, etc.

Peculiarities:

• High efficiency;
• Compactness;
• The ability to work with a very small difference in temperature flows (less than 1 o C);
• The ability to "self-cleaning";
• Plate heat exchangers are easily disassembled for inspection, cleaning and maintenance. It is possible to change the parameters of the heat exchanger by increasing or decreasing the number of plates.

Size range

You can buy TRANTER plate heat exchangers in our company at a bargain price.

Our company is an official service partner for the sale of equipment, repair and maintenance of heat exchange equipment of the TRANTER company in Russia and the CIS countries.

TRANTER is a leading brand in the design and manufacture of heat exchangers for a variety of applications. For over 80 years, Tranter has been supplying the highest quality heat exchangers. Tranter employs several thousand people worldwide in research and development, manufacturing, sales and service, and consists of highly qualified and experienced designers and sales people who are key players in the heat exchange equipment business.
Tranter offers a wide range of competitive heat exchangers worldwide through its own network of local sales companies, agents and distributors.
Tranter has five main production facilities located in the USA, Sweden, Germany, India, China.

The company also opened its own representative office in Russia.

Now TRANTER and SWEP heat exchangers are producedin Russiaseveral companies, but the truly unsurpassed quality of the legendary brand products and the supply of original components can only be offered by the own official representative office of the Swedish company TRANTERin Russia .

​

You can calculate the heat exchanger with us completely free of charge according to the parameters you set;

The calculation requires the operating parameters of your network;

1. The purpose of the heat exchanger (heating, hot water, ventilation)

2. Working medium (water, glycol, steam, etc.)

3. Inlet temperature of the network heat carrier and return temperature

4. Incoming temperature of the heated medium at the inlet to the heat exchanger

5. The temperature of the heated medium at the outlet of the heat exchanger

6. The temperature to which it is necessary to heat or cool the internal circuit of the network

7. Margin of surface for contamination in%

8. Permissible pressure losses along the heat exchanger circuits (average 3-5)

9. Power kW (for heating)

10. Mass flow for hot water (t/h) - for both circuits

11.Maximum network working pressure

It is advisable to complete our heat exchanger calculation sheet.

​

You can also send us the factory serial number of the defective heat exchanger you have installed and we will be able to sell you exactly the same new heat exchanger on favorable terms for you.

List of GX/GC/GL components available for delivery from the TRANTER warehouse in RUSSIA and Sweden:

Spare parts for heat exchangers
Our company offers a full range of spare parts for RosVEP, Tranter and SWEP gasketed plate heat exchangers.
You can purchase spare plates and seals for heat exchangers from stock or on order from us:
GX-6**, GX-7*, GX-12*, GX-18*, GX-26, GX-42, GX-51, GX-60, GX-64, GX-85, GX-91, GX -100, GX-118, GX-140, GX-145, GX-180*, GX-205, GX-265*, GX-325*.
GD-7*, GD-13, GD-16, GD-18*, GD-26, GD-30, GD-42*.
GC-9, GC-12, GC-16, GC-26, GC-28**, GC-30, GC-44, GC-48**, GC-50*,GC-51 ,GC-54 , GC -55**, GC-60, GC-65*, GC-75**, GC-78**, GC-85**, GC-95**.
GL-13, GL-85, GL-145, GL-205, GL-265, GL-352, GL-230, GL-330, GL-430.
GF-57, GF-97, GF-187.
G12*, G25**, G28*, G30*, G48**, G50*, G52*, G55**, G58*, G65*, G75**, G85**, G95**, G102*, G108* , G153*, G155*, G157*, G158*, G159*, G214*, G234*, G254*, G274*, G322*, G342*, G362*, G372*, G392*.
LT-26*, LT-51*, LT-60*.
HX-12**, HX-25**, HX-50**, HX-85**, HX-145**, HX-205**, HX-265**.
UFX-6**, UFX-18*, UFX-26*, UFX-37*, UFX-42*, UFX-51*, UFX-60*, UFX-64*, UFX-85*, UFX-91* , UFX-100*, UFX-118*, UFX-140*, UFX-145*, UFX-180*, UFX-205*, UFX-265*, UFX-325*.
Notes:
* - the model is discontinued, but spare plates and seals can be supplied;
** - the model is discontinued, only spare seals can be supplied.
For heat exchangers: GX-7, GX-12, GX-18, GX-26, GX-42, GX-51, GX-60, GX-64, GX-85, GX-91, GX-100, GX-118 , GX-140, GC-8, GC-9, GC-12, GC-26, GC-51, GC-54, GC-60, GL-13, GL-85, LT-26, LT-51, LT -60, GD-7*, GD-13, GD-16, GD-18*, GD-26, GD-30, GD-42* standard material plates and seals (isis 304, 316 stainless steel, NBR seals and EPDM), (for heat exchangers marked with an asterisk - seals only), delivery time from 1 working day (depending on the number of required plates and seals).

​

For heat exchangers: GX-006, GX-007, GC-008, GC-009, GX-012, GL-013, GX-018, GX-026, GC-026, GX-042, GX-051, GC-051 - Spare parts are supplied from RUSSIA and EUROPE. Delivery time is from 1 day to 4-6 weeks.

For heat exchangers from size 60, spare parts are supplied on order from factories in America and India, which increases the delivery time to 12 weeks.

TRANTER is a leading brand in the design and manufacture of heat exchangers for a variety of applications. For over 70 years, Tranter has been supplying the highest quality heat exchangers. Tranter employs approximately 800 people worldwide in research and development, manufacturing, sales and service, and consists of highly qualified and experienced designers and sales people who are key players in the heat exchange equipment business.
Tranter offers a wide range of competitive heat exchangers worldwide through its own network of local sales companies, agents and distributors.
Tranter has five main manufacturing facilities located in the USA, Sweden, Germany, India and China. Smaller units are also produced by trading companies around the world.

Gasketed Plate Heat Exchangers (PHE)

Custom made Tranter gasketed plate heat exchangers are available in 30 sizes with connections ranging from 25mm to 500mm. The seals between the heat exchanger plates are sealing media, the heat exchangers can be easily dismantled for cleaning and maintenance.
Depending on the application, the following types of heat exchanger plate materials are used: stainless steel grades SS304, SS316, 2545SVO, Titanium, Ti-Pd, Hastelloy C-276, nickel, incoloy and other special materials. Seals are available in a variety of material types: NBR (Nitrile Butadiene Rubber), EPDM, VITON and others as best suited to the application.

All-welded plate heat exchangers (WHE)

Tranter fully welded plate heat exchangers are custom built to ensure high quality and efficiency. These are compact heat exchangers for use at extreme temperatures and pressures, in conditions that do not allow the use of seals. These heat exchangers are highly efficient, small in size and require minimal maintenance. All-welded plate heat exchangers are optimal for liquids, gases and two-phase media at very high pressures, low and high temperatures. We offer four main types of all-welded heat exchangers: block, shell and plate, spiral and immersion with connection sizes from 25 mm to 300 mm.

The most extensive range of standard sizes of heat exchangers, various shaped designs, as well as a unique nomenclature of high-performance inserts.

The design of heat exchangers is based on a modular principle. Standard frames, plates with different geometries, and several connection options can be configured in combination to create devices suitable for a wide range of applications.

The heat exchangers are easily disassembled for inspection, cleaning or maintenance.

An additional advantage of gasketed plate heat exchangers is the ability to increase or decrease the number of plates for maximum optimization of the heat exchanger parameters in case of a change in operating mode.

Tranter offers the world's most comprehensive range of plate heat exchangers for a variety of applications.

The design of plate heat exchangers is based on a modular principle and designed in such a way as to ensure maximum efficiency of heat transfer from one liquid medium to another, or from steam to liquid. Frames, plates and connections can be combined to create different types of heat exchangers. By using different types of plates, with different characteristics, it is possible to create heat exchangers suitable for a wide range of applications. An additional advantage of gasketed plate heat exchangers is the possibility of increasing or decreasing the number of plates or adapting them to maximize the optimization of the heat exchanger parameters, in case of a change in operating mode.

Flow: 0-4,600 m3/h
Max working pressure: 25 bar
Temperature: -40°С - +180°С
Connections: DN25 - DN500 Flanges, butt weld, thread

GC and GL Inserts

Symmetrical inserts for standard settings. The use of various combinations of plate geometries makes it possible to achieve optimization of heat transfer coefficients and pressure drop in each specific case. Obtuse angled plates reduce flow rate and sharp angled plates reduce pressure drop.

GX Ultraflex Plates

The herringbone pattern plates are available in obtuse or acute angles, giving 6 different channel configurations.

By combining the directions and reliefs of the Obtuse or Acute Ultraflex plates, six different configurations are achieved to meet your specific technical needs.

GD Double inserts

Two laser welded plates for maximum safety. Designed for use in the pharmaceutical, food industry, central heating systems, transformer oil cooling, etc.

GF Wide Gap Inserts

Plates with deep channels for media containing fibers and solids. The relief of the plates creates a high thermal efficiency even with asymmetric flows and is particularly suitable for use in cooling systems.

GW Semi Welded Plates

Pairwise welded plates for ammonia and other hazardous media. The relief of the plates creates a high thermal efficiency even with asymmetric flows and is particularly suitable for use in cooling systems.

Our company offers the most extensive range of gasketed, welded and brazed plate heat exchangers for various applications. The supplied heat exchange equipment is manufactured in Europe, Asia and America together with partners - TRANTER International AB and SWEP International AB. Gasketed heat exchangers of the GX, GC, GL, GD, GF, GW series are manufactured in Russia. Heat exchangers SWEP, RoSVEP, TRANTER are certified by the majority of authorized Russian and international organizations.

The table below shows the markings of identical models of heat exchangers.

Our company is the official service partner for the repair and maintenance of TRANTER heat exchange equipment in Russia ().

You can purchase from us:

Plate heat exchangers

Plates for heat exchanger

Gaskets for heat exchanger

Heat exchanger accessories

Spare parts for heat exchanger

Means for descaling, cleaning, washing the heat exchanger

Installation (pump) for cleaning, washing the heat exchanger from scale and lime deposits

Service center services:

Cleaning and washing the heat exchanger

Chemical cleaning and washing of the heat exchanger

Collapsible cleaning and flushing of the heat exchanger

CIP cleaning and flushing of the heat exchanger

Replacement of plates and gaskets in the heat exchanger

Repair of a plate heat exchanger

Power increase plate heat exchanger

To perform the calculation of the heat exchanger, we need the initial parameters. Download the form from the site, fill it out and send it to us by e-mail or fax.

Calculation of the heat exchanger is free of charge.

MZ Teplo Systems LLC - performs maintenance and repair of heat exchangers in Moscow and on the territory of the Central Federal District.

List of areas served: Moscow, Moscow, Kaluga, Yaroslavl, Tver, Tula, Ryazan, Tambov, Lipetsk, Tver, Smolensk, Ivanovo, Kursk, Kostroma, Vladimir, Bryansk regions, etc...