Duct tape, or duct tape as most people call it, is one of the most popular temporary fixing methods. But after removing the adhesive tape from the plastic surface, the question may arise, how to wash the adhesive from the adhesive tape from the plastic. The "downside" of tape's great properties is often sticky adhesive streaks that remain after the tape is removed. The sticky strip quickly turns black, covered with dirt, and it is quite difficult to wipe off even a thin layer. The editors of the site will come to the rescue and reveal all the subtleties of removing the hated sticky trace from the plastic.
It is not for nothing that many crimes are discovered immediately “in hot pursuit”. With an adhesive strip from adhesive tape, the same story - the faster the adhesive tape from plastic, the easier it will be. Consider the main methods.
How to clean adhesive tape from plastic by gluing a strip of new adhesive tape
This option may work if not old. The principle and sequence of actions are as simple as possible: we unwind a strip of the desired length from the roll with adhesive tape, press it into place, smooth it, and tear it off sharply. will remain on the duct tape if done correctly. But, most likely, part of the glue will remain in place, and the following will have to be applied.
How to wipe tape from plastic with a cloth dipped in hot water
If there is enough time left, you can wipe off the sticky stain with a cloth dipped in warm water. To do this, wet a cloth, press it for a while to the place, when the adhesive layer softens, wipe the surface. It will take about 5-8 minutes to complete.
Mechanical removal of traces of adhesive tape with a stationery eraser
A stationery eraser can serve as a good means of elimination. In the case when the glue is not yet dry, this method is not suitable, because. the substance sticks partially to the eraser. It can remove adhesive marks from plastic in the same way as a pencil from pages. It will take effort to achieve the desired result.
Therefore, gentle female hands may not wipe off the dirt to the end. If the surface is large, use a drill at a slow speed with a special nozzle.
Related article:
: folk methods and special means. Options for removing dirt from specific contaminants: dirt stains, paint, whitewash, mounting foam, glue, primer, lime and cement - in our publication.
How to wash old traces of adhesive tape on plastic from improvised means
It is much more difficult to get rid of the stubborn adhesive base. But here, too, nothing is impossible. You just need to choose the right method and tool.
How to remove tape marks on plastic with vegetable oil and alcohol
Suitable vegetable oil from any raw material (seeds or olives), which at this time is present in the kitchen. A cloth soaked with oil is left on top of the stain for several hours, during which time it will reduce the adhesion of the adhesive. After that, it will be enough to wipe the plastic with a damp towel to wipe off the residue. A soap solution is used to remove the greasy layer. You can prepare it using washing powder, soap or dishes.
Ethyl and ammonia are more aggressive agents. Therefore, before applying them for, it is worth checking the reaction of the material on a site hidden from the eyes. Do not use alcohol on the painted surface, because. as he removes the layer of paint. To remove, apply a little alcohol to the traces of adhesive tape (you can easily rub it). Once the adhesive is removed, wipe with a paper towel or flag cloth.
How to clean plastic tape with baking soda gruel
After measuring a handful of baking soda (by eye), you need to mix it with a small amount of water to a creamy mass.
This slurry is applied to the surface with. Soda acts as an abrasive in the mixture, which can easily cope with the stain. If after processing there are still traces of glue, you should repeat the “event” again. After wiping the treatment area with a damp cloth, and then wipe dry.
How to remove adhesive from adhesive tape from chemicals
Powder products, gasoline - all this will help in the fight against the adhesive trace on plastic.
Window cleaner. Substances contained in the composition of products from different manufacturers will perfectly deal with traces of adhesive tape. To clean the surface you need:
- Spray liquid on .
- Allow five minutes for the sticky substance to soften.
- Wipe the adhesive off the surface.
Powder products. Be very careful when applying this method to plastics. If it is not sufficiently resistant to mechanical stress, then it is not necessary to rub the products with powder. To remove dirt, do the following:
- Dip a wet sponge into the powder.
- Press the sponge on the stain for 5-10 minutes.
- Caution, carefully proceed with the cleaning.
- When clogged, rinse the sponge in water.
Attention! Use this method only for plastics that are resistant to mechanical stress.
If you decide to use gasoline, then it is better to take the one for lighters (it is less aggressive and evaporates quickly), but if not, a regular car will do. Great for cleaning up dirt. It is better to carry out manipulations with gasoline in the open air or in a well-ventilated area, away from an open source of fire.
Means are applied pointwise so as not to damage the surface structure. It is impossible to pour onto plastic, and even more so soak it in aggressive substances, the surface can be deformed. This also applies to solvents, which will be discussed below.
Related article:
: water, household chemicals, folk recipes, miracle microfiber cloth; how to wash difficult dirt from limescale, stickers and markers from a mirror - read in the publication.
How to wash traces of adhesive tape with white spirit and acetone
Solvents. For example, white spirit or acetone is likely to be found in every home. They do a great job cleaning plastics.
It is impossible to treat painted surfaces with acetone, because. it eats away the paint. The algorithm of actions when working with solvents or acetone is simple, it consists of three points:
- First, we wet a rag in solvents.
- With the help of rags, remove it until it disappears completely.
- We wipe the treatment area with an important rag.
How to remove traces of adhesive tape with food vinegar and ammonia
Ammonia is another remedy for removing traces of the location of the adhesive tape. Before use, it is worth checking on a site hidden from the eyes how resistant the material is to it.
After applying the funds to the object, you should rub the stain a little, then clean it with a damp cloth.
How can you remove traces of adhesive tape from plastic from specialized products?
The market is now ready to offer a wide range of funds against similar ones, based on the complexity and financial capabilities of the buyer.
Even lines of products have been developed for cleaning and removing glue that remains after an unsuccessful procedure. There are some general recommendations for working with special tools:
- You need to know that almost all compounds are very aggressive. It is advisable to avoid contact with the skin. Therefore, before removing the adhesive from the adhesive tape, you need to wear rubber gloves.
- They are sprayed, and some products are applied to the surface or sponge. Then start cleaning. It is advised to process only the area that is stained with glue.
- From time to time it is worth rinsing the sponge. Adhesive particles will be removed from the abrasive layer. If this is not done, then it will clog with glue, and will not clean the surface.
- At the last stage, the adhesive particles rolled into pellets are cleaned. Wipe the plastic with a damp cloth.
How to clean the surface of plastic with Anti-Scotch
The product is suitable for painted surfaces. The principle of operation is as simple as possible. But you should be careful when working with the substance:
- Apply with a sponge or swab to the surface.
- Leave for 10-15 seconds.
- Wipe with a dry cloth.
How to clean plastic with adhesive removers and all-purpose aerosol cleaners
First of all, you need to study the instructions for a specific tool. Find out if the substance will harm the surface to be cleaned. It is advisable to apply or spray the product first on a hidden area. If no defects appear, you can apply it on a wide surface. Some tools can only be used in inconspicuous places.
After working with products containing aggressive substances, it is recommended. It is explained by the fact that there are a large number of volatile compounds in the air that can harm human health. Plastic can lose color if it is old and discolored, and the use of a product with aggressive substances has led to bleaching. It is usually recommended to make the entire surface white.
What is the best way to clean double sided tape?
It has already been said several times above that it is necessary to clean the plastic very carefully. This is due to the fact that the material is very poorly tolerated by aggressive substances.
Double-sided tape should be removed as carefully as possible. A hair dryer will help here either. The second method requires doing it through the substrate, because. in direct contact with the hot soleplate of the iron, the surface may be damaged, therefore, before removing the double-sided tape from the plastic, read the small instructions:
- The area to be cleaned should be heated in any convenient way.
- Using a dull knife or rubber spatula, the substance is scraped off.
- Adhesive strips that are difficult to remove can be cleaned using the methods listed above.
The better to wash the adhesive tape from the plastic window
If the previous methods did not work and you still need to learn how to remove double-sided tape from plastic, take a look at the methods below:
Having figured out how you can glue from adhesive tape, you can not be afraid and use such a universal "fastener" in unlimited quantities. After all, as folk wisdom says, “if you didn’t manage to fasten something with adhesive tape, then they took a little adhesive tape.”
Article
Adhesive tape is a universal fastener that is suitable for gluing a wide variety of materials. Its only drawback is that after peeling off the strip, ugly sticky marks remain on the surface - it can be quite difficult to wash them off.
However, today we will look at how to remove tape marks - we will explore all sorts of ways and methods to solve this problem.
- Why do traces of adhesive tape remain?
- How to remove adhesive tape from plastic surfaces?
- Removing tape from furniture
- How to remove tape residue from household appliances?
Why do traces of adhesive tape remain on the material?
The main disadvantage of adhesive tape when gluing is that the adhesive base seems to “eat” into the surface. It also depends on several parameters:
Now we will look at how to remove traces of adhesive tape, taking into account the surface where you pasted the strips of material. Following our advice, you will not only remove traces of adhesive, but also do not damage the material.
Plastic is one of the most popular materials in our home - furniture sets, dishes, household items, toys and much more are made from it. Before you start cleaning up traces of adhesive tape, you should evaluate the quality of the material. For example, if the plastic is of very good quality, you can use rather “aggressive” means with which to remove dirt much faster.
To remove the old layer of adhesive tape, you will need the following tools:
- petrol;
- White Spirit;
- eraser;
- vegetable oil;
You should start with a more gentle remedy, which includes vegetable oil. Pour some onto contaminated material. If the surface is vertical, soak a cloth in oil and apply it to the stain for a while. After that, remove the remaining adhesive substance with a napkin or a clean rag. Finally, treat the surface with soapy water to remove oil stains from the material.
You can also remove traces of adhesive tape with an ordinary school eraser. Moreover, this tool is suitable even for the elimination of chronic pollution.
True, the disadvantage of this option is its laboriousness - you will spend a lot of time on removing stains. Therefore, you should not resort to the method if the area of contamination is too large.
You can also use refined gasoline (it is used to refuel lighters) or white spirit - these tools will help you quickly remove traces of adhesive tape from any plastic surface. Just moisten a piece of cotton wool and process the material. Remove the remaining dirt with any detergent. The disadvantages of using these funds include their "aggressiveness". If you process low-quality plastic, it is high, the probability of simply washing off the top layer of material.
Tip: in order not to spoil the plastic, first treat an inconspicuous area of \u200b\u200bthe product with the product and evaluate the reaction of the material.
If the adhesive tape stays on the surface for a long time, it eats into its structure. In this case, you can remove it only with a hair dryer. Under the action of warm air, the material will soften, after which the residue can be removed with a regular detergent. The disadvantages of this method include the fact that not every type of plastic can withstand exposure to warm air.
How to clean tape marks from furniture?
Traces of adhesive tape on furniture appear most often during its transportation, because with the help of this material it is so easy to fix the doors of the refrigerator, cabinets, and other elements. In this case, you can also use the above tools, but before using them, be sure to remember a number of limitations:
- Vegetable oil can only be used to treat polished surfaces - untreated wood can absorb oil and swell as a result.
- Gasoline should be used with caution on painted surfaces as it can dissolve the coating.
- You can also remove dirt with an eraser, but remember about the area of \u200b\u200bthe surface to be treated - the larger it is, the more difficult it will be for you when cleaning.
- If you are going to use a hair dryer on varnished surfaces, be careful as light spots may remain.
We remove dirt from household appliances
If sticky traces remain on the washing machine, refrigerator or any other equipment, you can use:
Just soak a piece of cotton wool in any of these liquids and wipe off the dirt. If the stains are old and difficult to remove, apply a cloth soaked in acetone to the stain for a while, and then try to wipe it off with a little effort.
Vinegar does a good job of removing dirt, but this remedy is only suitable for light and fresh stains.
Now you know how to wipe off traces of adhesive tape from various surfaces. We hope you take advantage of our tips for removing contaminants.
There are situations in life when you have to resort to various methods to clean a surface. Very often, traces of adhesive tape appear on furniture, windows and doors. This happens when you need to attach something to a surface. And when the need is gone, you peel off the adhesive tape, but the glue remains. This is unpleasant not only because the surface becomes sticky, but also because dust and other rubbish stick to it, dirt accumulates. In this article, you will find the answer to the question of how to wipe tape from plastic and several ways to solve this problem.
Remove stains with duct tape
The most common way to remove glue stains from tape is with the tape itself. The principle of kicking out works here. "However, this method does not always work one hundred percent, if, for example, the traces are already old.
If you use this tool, nothing bad will happen to the plastic surface. To remove tape stains on plastic, take any and cut off a small piece. Then, with sharp movements, stick it to the stain and tear it off. You need to do everything quickly so that the tape only has time to grab the glue from the surface, but not stick by itself.
Usually, this method works well with recent pollution. But if the glue cannot be removed, then take more serious measures.
Sunflower oil
How to remove adhesive tape from plastic? The solution to the problem can usually be sunflower oil. You can also use any other vegetable oil you have at home (olive, linseed, grape) or even essential oils. But still it is more economical to use sunflower for this purpose, since it is the cheapest.
To understand how to wipe marks from adhesive tape from plastic, you need to try several methods and choose the right one. So, pour some oil on a foam sponge or cloth. Put it on the stain and leave it for a while. 15-20 minutes will be enough.
The oil works in the following way. Under its influence, the glue is impregnated and increases in volume, therefore, moves away from the surface.
After the specified time, simply wipe off the remaining dirt with another rag or paper towel. The oil can be easily washed off with ordinary laundry soap.
Now you know how to wipe the glue from the adhesive tape from the plastic using vegetable oil. It will help solve the problem on surfaces other than wood.
Wipe off glue with alcohol
Alcohol is a versatile and effective remedy. It will not only not harm the plastic surface, but also completely clean it of contaminants.
If you are wondering how you can wipe the adhesive tape from the plastic, look in the first aid kit. In any home there is medical, ammonia or alcohol tincture. You can also use vodka.
Alcohol will help not only remove the adhesive from the surface, but also bleach the plastic if it has turned yellow. Take a cotton pad and soak it in alcohol. Apply a stain remover.
Most often, this method is used to clean plastic windows, and not only for frames, but also for glass. Even special glass cleaners are made on an alcohol basis.
Remember, never apply alcohol to a painted surface. The product may dissolve the paint.
stationery eraser
Many may not believe it, but the solution to the question of how to wipe the adhesive tape from plastic can be an ordinary stationery eraser or, as it is called in another way, an eraser. It cleans wooden or plastic surfaces easily and simply.
There are no tricks to use here. You just need to take an eraser and rub the glue stain until it disappears. Double-sided erasers or pen erasers work even better as they have a hard structure.
When the contamination is removed, a rubber mark may be left. There is no need to be afraid that a new spot has appeared in place of the old one. It can be easily removed with a damp cloth, preferably made from natural fabrics that absorb moisture well.
Soap
Soap, especially household soap, is a folk cleaning agent that has been used since ancient times to clean various contaminants. Surprisingly, soap can even remove traces of adhesive tape.
Dilute a little soap in water so that a solution of sufficient concentration is obtained. Now soak a piece of cloth or sponge in the product and rub the dirt left by the tape. If the plastic thing is small and can be immersed in water, then it will be more convenient to leave it for a while in a soapy solution. So the stain will go away by itself, and you just have to wipe the surface.
Cleaning agent
Among other things, dry detergent powder will help in solving the problem of how to wipe the adhesive tape from the plastic. If there is none in the house, try using soda, it also acts like a scrub.
Of course, if this cleaner is used incorrectly, it can damage the surface, leaving scratches. But there will be no harm if you proceed as follows:
- Dampen the sponge and sprinkle the powder on it.
- Press onto the stain and leave for a while to soak the dirt and become more pliable.
- Gently wipe off the adhesive. You can not rub the stain with force - this is what injures the plastic and any other surface.
- When finished, wipe with a clean, damp cloth to remove any remaining cleaning powder.
hair dryer
How to get rid of plastic? Probably not many people know that it can be removed with a hair dryer.
So, clean up according to the following steps:
- Plug in the hair dryer. The main thing is that it reaches the place of pollution.
- If your hair dryer has several modes, then you need to set it to high power. An average is enough if you are afraid of overheating the device.
- Now turn on the hair dryer and point it at the double sided tape. You need to hold as much as possible, at least three minutes. Especially warm up the edges of the tape - in these places the adhesive tape sticks most firmly.
- Turn off the hair dryer, pry off the corner of the tape with a flat plate or fingernail. The adhesive tape should immediately come off about half. You can gently tear it off, or warm it up again so that it moves away by itself.
As a plate, the non-sharp side of a small knife or a children's spatula for plasticine is suitable.
Vinegar soap solution
If you are still thinking about plastic, then improvised tools that are usually found in every home can help you. It's vinegar, soap and water.
Prepare a solution. This will require 270 g of water and 60 g of vinegar. This amount is equivalent to two cups and a quarter of a cup, respectively. Add some liquid soap to the solution.
Using a sponge or cloth soaked in the solution, remove the tape by rubbing the dirt in a circle. Be careful not to rub too long or increase the percentage of vinegar as there is a risk that the surface will fade.
However, you have nothing to fear if the plastic (or any other) surface is white. From the vinegar-soap solution, it will only look cleaner. By the way, vinegar is widely used in glass cleaning - it not only removes dirt, but also makes the surface shine.
Melamine sponge
There is another tool in the fight against double-sided adhesive tape - this is sometimes called a magic eraser in another way.
All you have to do is soak the melamine sponge in water. Then, simply rub off the remaining adhesive tape or glue residue. The Magic Eraser does a great job of doing this, and you won't have to struggle with getting dirty for long.
This tool is considered a mild abrasive. It must not be used on glass and surfaces that have been polished. However, you can safely clean walls and doors with a melamine sponge. Keep in mind that the magic eraser may slightly discolor the item that needs to be cleaned.
Many are wondering where you can buy this tool, because, perhaps, for some it is new. In fact, you can buy a sponge at a regular hardware store or a large home improvement supermarket in the cleaning products section.
Thus, do not panic if a trace of adhesive tape or double-sided tape is found on the plastic surface. Use the recommendations of this article, and such pollution will no longer be a problem for you.
mechanical way:
- if the trace of the adhesive tape is not sticky (dried), it can be erased with a finger or an eraser. Rub the contaminated surface, rolling the glue into spools. With the same success, you can use a plastic bank card or a scraper to clean glass-ceramic plates.
- fresh glue can be heated and removed with a steam generator - it is now becoming fashionable to have such a practical device at home.
You can also use, for example, a kettle. Contamination must be heated for 1 minute, and then removed with a plastic card or a scraper. The cooled adhesive residues are easily removed with a finger.
- sometimes old adhesive residue can be removed... with masking tape. Press the paint brush against the surface and pull it towards you. The procedure can be repeated several times. When dirty, the tape is replaced with a new one.
Chemical method:
- from a glass, metal or ceramic surface, traces of adhesive tape are easily removed with essential oils. Oils may leave stains on other surfaces.
- use vegetable oil (it is better to use olive or rapeseed). To do this, moisten a cloth with oil and apply it to the contaminated place for several minutes, then wipe off the remaining glue with your finger, rubber band or plastic card. Before use, you need to check if the oil leaves stains on the surface.
Most essential oils can also deal with adhesive residue on glass, metal, ceramics, and tiles.
- you can dissolve the glue from the adhesive tape with vinegar. Apply it with a brush and let it work for a few minutes, then rinse with water. Repeat if necessary.
- you can wipe off traces of adhesive tape with clean kerosene. Dampen a soft cloth with it and rub the sticky mark - the glue will dissolve.
- Adhesives can be removed from glass, ceramic or metal with lighter fluid. You need to work in disposable gloves.
- You can wipe off the glue residue with wet hand cleaning wipes. The contaminated place should be rubbed with a napkin until the surface is clean (not sticky).
You can list various liquids and aerosols for a long time, but the most effective tool (from my own experience) is the B-52 paint remover for paint and varnish coatings.
You need to work with it in a ventilated area (it has a very sharp unpleasant odor) and be sure to wear protective rubber gloves, as the liquid corrodes the skin.
When using a chemical method, remember: the more ingredients in the product, the more dangerous it is for some types of plastic and for absorbent surfaces (fabric, leather, wood ...) - there is a high probability that oil stains will remain instead of tape marks.
We call adhesive tape adhesive tape, because it was this brand that first appeared on the markets of our country. The creators gave her the name after the English word Scotch - Scot, which in America of the last century was synonymous with stinginess. The nickname came from users of early samples of the tape who complained that there was too little adhesive on the cellophane strip. Now we are racking our brains on how to wash this glue from adhesive tape, there are so many of it.
In fact, difficulties in removing the remnants of adhesive tape arise only if you do not know some tricks. Despite the variety of types of this tape, acrylic-based glue is used everywhere. It turns out that the choice of means depends on the material on which the contamination was found.
How to clean tape on plastic
In our homes, plastic is used everywhere: frames, household items, furniture, children's toys and many other items. And before cleaning it from stains, you need to evaluate how good this plastic is. High-quality material is able to withstand more aggressive means than cheap products. The contact time is also taken into account, because it is much more difficult to separate the old adhesive tape. Of the simple improvised means may come in handy:
- Vegetable oil
- white spirit or gasoline
- ordinary eraser
- Hair dryer
kitchen magic
Oddly enough, removing traces of adhesive tape is easy with any vegetable oil. It mixes with glue, changing its properties. The oil is poured directly onto the contaminated surface or applied to a cloth and applied to the stain for several hours. The mass that has lost its stickiness is erased with a regular napkin, and the surface is washed with soapy water.
Disadvantages. Unfortunately, this method is not applicable if it is not possible to thoroughly wash the object of oil with water.
Three, three, three and it will be ... clean
School eraser works wonders, removing traces of even the most ancient adhesive tape. Dirt is removed, like pencil marks in an album, and all that remains is to brush off the specks with a damp soft cloth. This method is equally suitable for electrical engineering, and for plastic windows, for furniture or for toys.
Heat up until done
Old glue tightly eats into plastic surfaces. That's why it's important to remove masking tape or protective film as quickly as possible. It is better to clean pieces of building foam from the window plastic than to wait until, under the influence of the sun and time, the glue and the frame of the double-glazed window merge into a single whole. The above applies to other subjects as well.
If this still happened, then you can try using a hair dryer. From heat, the adhesive mass will soften and come into contact with other cleaning products. The help of a hair dryer is indispensable when removing double-sided tape, since in addition to acrylic it contains rubber and various foam materials, dense pieces of which remain on everything to which they have been glued for a long time.
Disadvantages. A hair dryer is not always at hand, and besides, not every plastic will survive the temperature rise without losing its decorative effect.
Tape damaged furniture
During transportation, drawers and doors of cabinets and cabinets are fixed with adhesive tape, and then they cannot decide how to wash the adhesive tape. The tools used here are the same as for plastic, but there are some features of their use.
