Breezer Tion 3S is a compact supply ventilation with heating, air purification and smart control from a smartphone. Breezer supplies fresh clean air from the street, effectively ventilating even with the windows closed. The recirculation mode allows you to clean the air inside the room from dust and odors. The automatic control function saves time and energy.
The most efficient cleaning
Filters G4 + HEPA H11 + AK-XL
+ air heating
Price: 38 990 rubles.
The most comfortable breather: base station included
Filters G4 + HEPA H11 + AK-XL
+ air heating
Price: 47 990 rubles.
Breezer installation
THESE GUYS WILL COME AND INSTALL THE BREEZER IN YOUR HOUSE IN 1 HOUR.
Installation is easier than an air conditioner. There is no seasonality. Facade does not spoil. During repair or already with a fine finish. There is no dust or dirt. They'll take it away. .
Filters for Tion 3S
- Primary filter class G4 - 490 rub.
Installed in all breathers. Detains down, wool, large particles of dust, pollen and other pollutants. It is recommended to vacuum or rinse with water once a month without the use of household chemicals. Replacement frequency - 1 time per year, depending on the operating conditions. - HEPA filter E11 (H11) - 1 990 rub.
Purifies the air according to the medical standard from the smallest contaminants, including allergens: dust, pollen, infections, mold spores, etc. Replacement frequency - 1 time in 2 years, depending on the operating conditions. - Adsorption catalytic filter AK-XL - 1 990 rub.
Cleans the supply air from harmful gases and industrial emissions. Replacement frequency - 1 time per year, depending on the operating conditions.
The cost of a complete set of filters - 4 070 rub
Quality assurance
We are confident in the quality. Term of operation of the device - not less than 5 years. With careful handling, timely replacement of filters and compliance with the instructions for use, the device will serve you much longer. The warranty for Tion 3S is 1 year from the date of purchase.
Frequently Asked Questions & Answers
Does the breather cool the air? What is the difference between a breather and an air conditioner?
The air conditioner cools the air, but does not ventilate the room (does not supply fresh air from the street for breathing) and does not relieve stuffiness when the windows are closed. The external unit of the air conditioner is needed to cool the coolant, only a thin tube with freon goes from it to the indoor unit, and air from the street is not supplied to the room. The breather does not cool the air, but ventilates the room, supplying purified air from the street. The main function of the breather is to provide the necessary fresh air for breathing, to get rid of stuffiness with the windows closed. Thus, the breather and the air conditioner complement each other, allowing both to cool the room and supply fresh purified air from the street, getting rid of stuffiness.
What is the difference between a breather and an air cleaner, air washer and more?
Air purifiers and air washers do not provide an influx of fresh air, "chasing" the air inside the room. Depending on the level of the purifier, it may be better or worse at removing pollutants from the air, but it will be stuffy with the window closed. If you open the window, all the dirt and allergens from the street will pour into the apartment, as a result, the effectiveness of the cleaner will become barely noticeable against the background of the flow of dust and dirt from the window.
Breezer, on the contrary, does not “drive” the air inside the apartment, but purifies the street air, supplying it inside. At the same time, dirty air inside the apartment is replaced with clean air and forced out through a natural exhaust. Thus, the breather not only performs the function of a cleaner, but also does much more - it saves not only from pollutants and allergens, but also from stuffiness with closed windows.
Does the breather humidify the air? What is the difference between a breather and a humidifier?
The breather does not have a humidification function. It supplies air with the same absolute humidity into the room as it does outside. If the room is humid, and the street is dry, due to the operation of the breather, the humidity is normalized. A humidifier increases the humidity inside the room, but does not relieve stuffiness. If the humidity of the outdoor air is too low for you, then a humidifier can be used with the breather.
In what rooms is it better to install a breather?
The device is recommended to be installed in those rooms where people spend the maximum amount of their time, i.e. where they “breathe” the most: nursery, bedroom, living room. One appliance can serve one room.
Why is a breather better than an inlet valve?
The efficiency of the inlet valve directly depends on the operation of the hood. If the hood does not work well, then the valve will work poorly. Also, the valve has practically no cleaning and no heating. In winter, it supplies cold air creating drafts and can even freeze through. The Breezer also has low-noise fans, three-stage cleaning and climate-controlled heating. Thus, the Breezer will supply clean, fresh and heated air to the predetermined temperature into the room.
How to check the efficiency of the hood?
Very simple, open the window in the room and lean a regular A4 sheet against the exhaust outlet in the kitchen or toilet. The sheet should stick. If it does not stick, then the hood is not working well.
Why can the extractor hood work poorly?
First, the exhaust duct may be clogged. It is often not possible to clean it. Secondly, the operation of the hood is provided by a pressure drop in the exhaust duct. This difference is provided by the following factors:
1. Temperature difference. When it is cool outside and the room is warm, the difference is good and the hood works well. When it is warm outside and the room is warm, there is no difference and the hood does not work well. In hot weather, the hood may even start to work in the opposite direction and you will smell the smells that will come to you from the neighbors.
2. The height of the exhaust duct. Simply put, the higher you live, the worse the hood works. On the last and penultimate floors of the house, the hoods usually practically do not work.
3. Forced air injection into the room. This is exactly what Breezer provides. It creates excessive air pressure, which forces the air to move towards the hood, taking with it the pollution and odors that form inside the room.
Can the room be ventilated with an exhaust fan?
The exhaust fan is only effective if there is air flow. If you close the plastic windows and turn on the fan, you will only get the effect of vacuum (like when an airplane takes off, it can even block your ears), but the ventilation effect will be close to zero and you will not get fresh air. It can be provided by opening windows or by installing a valve, which will lead to the corresponding problems - drafts, freezing, street dust and dirt.
At the same time, an exhaust fan is not needed for the Breezer to work, because. The breather itself creates pressure, which will force the air to go into the hood.
Why is a breather better than an Aeropack ventilator?
Aeropack has no heating at all and has poor air purification (50% versus 99% for Breezer).
How often should Tion O2 be turned on?
It is recommended to use the breather around the clock. If there are people in the room, then they constantly “eat up” oxygen and exhale carbon dioxide, which means that the influx of fresh air must be constant, like the breathing of people. If there are no people in the room, it is still recommended not to turn off the device: furniture, finishing materials and pets can constantly emit harmful substances, allergens and odors. The influx of fresh, clean air from the breather will force these contaminants into the natural exhaust, so when you return to the room, the air will be clean and fresh. We recommend turning off the breather only for a period of long absence.
How many appliances do I need for my house, apartment or office?
The simple answer is one appliance per room.
A more detailed calculation can be made by the number of people in the room and by its area. According to SNiP 31-01-2003, 30 m3 of fresh air per hour should be supplied per person or, according to SP 54.13330.2011 - 3 m3/hour per 1 m2 of premises. The capacity of Tion O2 is up to 120 m3/hour, respectively, one Tion O2 unit provides fresh air for up to 4 people in one room up to 40 m2. As a rule, devices are installed in rooms where people are constantly present.
How is the breather installed and how difficult is the installation?
The Tion O2 Breezer is easier to install than an air conditioner. The main task during installation is to make a hole in the wall with a diameter of 132mm. Installation of the device usually takes about 1 hour and will not harm your repair. Eros installation teams use professional equipment for diamond drilling, which is connected to an industrial vacuum cleaner with water supply to wet the dust. This allows you not to leave dirt and dust after work.
Is it possible to install the device in a house with an insulated facade?
Can. When communicating with the operator, it is necessary to inform about the presence of a ventilated facade on the house and clarify its material. If it is a facing brick, then the installation is no different from the usual. If these are composite sheets, then it is only necessary to choose a place for the device so that the hole does not fall into the profile to which the facade sheets are attached. If this is porcelain stoneware, then there are 2 installation options: either install a ventilation duct "under the facade", without outlet to the outside, or drill through the ventilation facade, while the quality of the incoming air and the installation price will be the same in both options.
Is it necessary to coordinate the installation of the breather?
No, according to current building codes, holes smaller than 200mm are not required to be approved. The hole is closed with a decorative grill from the street, so it does not spoil the appearance of the building, unlike the external blocks of the air conditioner.
Does the thickness or material of the wall affect the ability to install a breather?
The breather can be installed on any wall - brick, reinforced concrete, wood, etc. at the same time, the installation cost will be fixed for any wall thickness.
I have a loggia behind the outer wall, how can I install the Tion O2 breather?
There are 3 options:
1. If there are no plastic windows on the loggia or their constant position in the ventilation mode is allowed, then you can install the breather so that it takes air directly from the loggia. This does not interfere with the flow of fresh air either in summer or in winter. In addition, in winter, even on an uninsulated loggia, the temperature is higher than the street temperature, which will allow you to spend even less energy on heating the air. This installation option is common in new houses, where the loggias are glazed already at the construction stage.
2. If there are sealed plastic windows on the loggia and / or the loggia is completely insulated, then two holes are made: one in the wall between the room and the loggia, the second - directly in the outer wall of the loggia. A flexible duct connects both openings, the air is taken directly from the street. In this case, the device is located in the room in such a way as to minimize the length of the duct.
3. If the loggia is fully insulated and connected to the room, then the hole is made directly on the partition of the loggia and the device is placed on the partition. In this case, it is necessary that the door to the loggia always remain open.
How much does the Tion O2 breather cost?
The breather in the standart configuration costs 27,900 rubles without installation, in the base configuration - 25,900 rubles, light - 21,300 rubles. The delivery set includes: installation with a cascade of filters (in the standart configuration) or with one f7 basic filter (in the base and light configurations), a remote control, a mounting template, an instruction manual, a warranty card.
How much does it cost to install a Tion O2 breather?
The cost of installing Tion O2 depends on the region. The lower bar recommended by Tion at the cost of installation is 4000 rubles.
How often do filters need to be changed?
Tion O2 Standard uses 3 filters at the same time: basic F7 (pre-cleaning), high-performance HEPA filter H11 and adsorption-catalytic filter. The recommended period for replacing a set of filters, subject to periodic cleaning of the base filter with a vacuum cleaner, is once a year. Eros undertakes to remind its customers of the possible need to replace filters after a period of time agreed with the customer.
How much do Tion O2 filters cost and where can I buy them?
The basic f7 filter costs 1590 rubles, the high-performance hepa filter is 1990 rubles, the adsorption-catalytic filter is 1590 rubles. You can order filters by calling 8-800-500-57-36 from any city in Russia or by leaving a request on the website
How much electricity does the device consume?
In the mode of operation without heating up to 40 watts. With a maximum heating power from -40 s to + 25 s - 1.3 kW. On average, energy consumption during the year will be about 100 kW per month.
Can Tion O2 filters be washed or vacuumed?
How noisy is the device?
At the first speed, the device works no noisier than an air conditioner, and this does not interfere with most people's sleep. The noise level of the second and third speeds does not exceed 40 dB (A), which does not cause discomfort for most people during the daytime. Therefore, at night it is recommended to use the first speed, and in the daytime - the second or third. The fourth speed (turbo mode) is designed to quickly ventilate the room and is usually used after turning off the device for a long time.
At what temperature does Tion O2 work?
The system operates at an air temperature at the inlet to the device from -40C to +50C. At temperatures below -40C and above +50C, the device automatically turns off the air supply from the street and closes the damper.
What is the warranty period for Tion O2?
1 year from the date of sale. The company "Eros" undertakes full warranty and post-warranty maintenance of devices. If the device fails, we will come and take the device for diagnostics and repair, and for this time we will install a replacement device for the client free of charge. Thus, our customers do not experience discomfort due to possible problems with the device.
What is the duration of the breather and what is it due to?
The standard operating life of the device is 5 years. However, this is largely a conditional figure, more important for the buyer's accounting for the possibility of depreciation and write-off of equipment. The actual service life is much longer. This situation is similar to cars - the standard service life for a car is about 6 years, while we understand that with careful handling and timely maintenance and repair, cars “run” for 50 years. Therefore, the breather will last 10 years or more, with careful handling and timely maintenance and repair.
Where to contact in case of breakdown / failure of the device?
The company "Eros" undertakes full warranty and post-warranty maintenance of devices. If the device fails, we will come and take the device for diagnostics and repair, and for this time we will install a replacement device for the client free of charge. Thus, our customers do not experience discomfort due to possible problems with the device.
Where is the device manufactured?
The breather was developed in the Academgorodok of the city of Novosibirsk: Producer: TION group of companies, Novosibirsk. Address: Russia, 630090, Novosibirsk, st. Engineering, 20. The main stages of the assembly of devices are made in China according to the manufacturer's documentation (GK TION) and under his control. The final assembly of devices, their testing and completion with filters is carried out in Novosibirsk.
No device from household supply systems can work for cooling, but if the temperature outside the window is lower than in the room, then with the heating turned off, any of the devices can cool the room and work as an air conditioner.
What will the outside wall look like after installing the ventilator?
Outside the building, only a neat round lattice with a diameter of up to 15 cm will be visible. If desired, it can be matched to the color of the facade.
What should I do if the only possible place to install the ventilator is on a glazed balcony or loggia?
The easiest option is to bring the vent to the balcony / loggia, and open one window for micro-ventilation. However, this solution does not work for ventilators with a supply and exhaust system and heat recovery. The second option is similar to the first, but instead of micro-ventilation, a ventilation valve is installed in the opposite corner of the balcony or loggia. This solution also does not work in the case of installations with a supply and exhaust system and recuperation (since the exhaust air will inevitably mix with the incoming fresh air). The third option: the air duct from the ventilator is extended and led out into the street through a loggia or balcony. Thanks to the segmental design of modern air ducts, it is possible to conduct an air duct to the street without wasting space. This option is most preferable, it works for all types of ventilators and is not expensive. All possible methods are described in more detail here.
Is your ventilation system suitable for a private house or cottage?
For ventilation of a private country house, our system is ideal, because. Every home needs air exchange.
Can the ventilator be installed without making a hole in the wall?
Any ventilation system works according to the following principle: it starts fresh external air and removes internal polluted air through the hoods. Therefore, an opening to the street is required. However, there are systems that can be installed on the window, in which case drilling of the wall is not required.
), and today I will tell you about it in detail.
A person needs fresh air for a comfortable existence. If it does not enter the room, the concentration of carbon dioxide and other harmful substances in the air rises very quickly and in less than an hour, unpleasant phenomena such as headache and loss of efficiency can begin, and with a regular lack of ventilation, chronic fatigue syndrome occurs () .
In order to ensure the necessary ventilation, you must either always keep the window open or install a forced ventilation system.
The ventilator is installed in the room on an external wall, in which a hole with a diameter of 132 mm is drilled (drilling such holes is not prohibited). Fresh air is taken from the street, filtered, if necessary, heated and fed into the room. In addition, it is possible to purify the air in the room by switching the air intake source.
In this review, I will compare the Tion Breezer 3S with the previous model - Tion O2 ().
In the new model, emphasis is placed on noise insulation - all internal surfaces of the ventilator are covered with a porous noise-absorbing material.
The dimensions and thickness of the ventilator have slightly increased compared to the previous model. The overall dimensions of the Tion Breezer 3S case are 453x528x203 mm.
The inlet has moved to the bottom of the case. If you need to install on the hole made for the previous model, Tion Breezer 3S can be hung upside down.
In the new model, air is blown upwards through two narrow slots, in the Tion O2 it is blown forward through a grille in the lower part of the case.
The set of filters has changed.
The first filter (it is now below) is foam rubber G4, the second is HEPA H11, the third is adsorption-catalytic AK-XL. The AK-XL filter, despite the increased size, costs the same as AK for Tion O2 - 1590 rubles. HEPA H11 costs 1990 rubles. It is exactly the same as the Tion O2. G4 costs 490 rubles.
The new ventilator has a grate at the bottom to take air from the room.
There are three modes determined by the damper position:
- air is taken only from the street,
- air is taken from the room,
- air is taken from the street with a small admixture of air from the room.
The ceramic heater is located above the filters.
The new remote control now interacts with the ventilator via a radio channel. Before any action, you must press any button so that the remote control connects to the breather. This is not very convenient, but the remote control shows the status of the ventilator.
Tion Breezer 3S supports smartphone control. To do this, you need to install the MagicAir application and connect to the ventilator via Bluetooth.
The indicator, control buttons on the case and the mechanical power switch were removed in the new version. The only power button with a colored luminous ring is located at the bottom.
The performance of the Tion Breezer 3S, the previous model Tion O2 and the competing iFresh ventilator was measured with two instruments.
First, Andrey Karasev and I andrey23 we measured the performance using a Testo 417 anemometer with a flow straightener.
Then the head of the development group Tion Roman Smirnov flew to visit me from Novosibirsk with a Testo 425 thermal anemometer and an Oktava Eco 11A noise level meter.
The Tion Breezer 3S has six fan speeds, the Tion O2 has four, and the iFresh has three.
I summarized the results of measurements in a table.
The results of the readings of two instruments using different measurement principles (the impeller for the Testo 417 and the heated thermocouple cooled by the passing air for the Testo 425) are quite different and I don’t know which one to believe. However, it is possible to compare the results of airflow measurements of different ventilators and evaluate the compliance of the measured parameters with the declared ones.
At the minimum speed Tion Breezer 3S provides a flow of 21-28 M³/hour;
Measurements with a flow conditioner and calculation of the average value per minute gave slightly better results than we received in the previous experiment ().
To measure the noise level, the Oktava Eco 11A device was installed at a distance of 1 meter from the ventilator body. The minimum noise value was fixed, which allows you to compensate for any external short-term sounds.
The noise level in a very quiet room with the fans turned off was 18.1 dBA.
Measurement results:
At the first speed Tion Breezer 3S is almost silent and gives 21-28 M³/hour. This air flow is enough for one person in the room.
At the second speed, the fan noise is quiet, but already audible. When there are two people in the room, the CO2 level in the room rises to 900 ppm at night.
Second speed, day, two people in the room. The CO2 level sometimes exceeds 1000 ppm.
During the day, the second speed may not be enough. In this case, during the day, when the activity level is higher and the noise level requirements are lower, the third or fourth speed can be used.
Tion 3S Standard for 35,900 rubles.
Tion 3S Special 34900 rubles. It differs only in the absence of an adsorption-catalytic filter.
Tion 3S Smart for 43,900 rubles with the new version included.
In conclusion, the pros and cons of the Tion Breezer 3S.
Pros:
almost silent first speed;
the possibility of filtering the air in the room;
blowing up (convenient when there is a curtain in front of the ventilator)
Detachable cord that can exit to either side of the case
two-way communication with the remote control, displaying the current mode on its screen
Bluetooth control.
Minuses:
noticeable noise starting from the third speed;
lack of indication and control on the case;
uncomfortable remote control;
high price;
expensive filters.
2017, Alexey Nadezhin
The main topic of my blog is technology in human life. I write reviews, share experiences, talk about all sorts of interesting things. I also make reports from interesting places and talk about interesting events.
Add me to your friend list . Remember the short addresses of my blog: Blog1.rf and Blog1rf.ru.
My second project is lamptest.ru. I test LED lamps and help you figure out which ones are good and which are not so good.
What does every city dweller need? In clean and fresh air! And what can provide a person with clean and fresh air? Of course, the ventilation system Breather Tion 3S Smart. The device is distinguished by its performance and compact size. The advantage of the model is the presence of a base station MagicAir.
Features and Benefits:
- Breezer continuously supplies fresh air from the street with the windows closed.
- A cascade of 3 filters deeply purifies the air according to a medical standard.
- The supply air is heated and protects against drafts in winter.
- The windows are closed and the noise from the streets and from the highways does not enter the room.
Smart modification. The base station of the MagicAir smart microclimate system is included. Filter adsorption-catalytic AK-XL. Composed of:
- A heating element. You set a comfortable temperature on the breather, and it heats the supply air to the specified value. Protects from drafts.
- Control panel with LCD display. Informative display for easy control.
- Prefilter Installed in all breathers. Protects the device from large debris when air from the room passes through the breather in recirculation and mixed modes.
- Primary filter class G4. Installed in all breathers. Detains down, wool, large particles of dust, pollen and other pollutants. It is recommended to vacuum or rinse with water once a month without the use of household chemicals. Replacement frequency - 1 time per year, depending on the operating conditions.
- MagicAir base station. Monitors air quality and controls climate technology.
The breather is not intended for space heating.
Purification filter set:
- E11 (H11) class high efficiency filter. Purifies the air according to the medical standard from the smallest contaminants, including allergens: dust, pollen, infections, mold spores, etc. Replacement frequency - 1 time in 2 years, depending on the operating conditions.
- Primary filter G4. Detains down, wool, large particles of dust, pollen and other pollutants. It is recommended to vacuum or rinse with water once a month without the use of household chemicals. Replacement frequency - 1 time per year, depending on the operating conditions.
- Filter adsorption-catalytic AK-XL. Cleans the air from harmful gases and industrial emissions. Replacement frequency - 1 time per year, depending on the operating conditions.
Breezer compact air handling units are an excellent choice for the office. The units do not just supply air from the street: the air is cleaned and heated before supply, which ensures comfortable microclimatic conditions. Stuffiness, dampness, unpleasant odors - all this will become just a memory after installing the Breezer air handling unit! The family is represented by a variety of models: for megacities, for warm regions, for connoisseurs of comfort, etc.
