Anti-decubitus mattresses with a compressor are products that work by constantly alternately filling / deflating certain areas with air. The cells of such a mattress are filled in a checkerboard pattern, which allows human tissues to “rest”. The use of anti-decubitus products is justified in cases where:

• prevention and elimination of trophic ulcers is necessary;
• it is required to eliminate dead tissue on the body;
• there are problems with the spine and its departments, etc.

In addition, these mattresses are high-strength and hypoallergenic. They normalize blood circulation, which contributes to the well-being of the patient.

Advantages of compressor mattresses

All mattresses are designed to effectively combat bedsores. However, the presence of a compressor allows you to enhance the effect of the application as follows:

• you can choose operating modes that automatically maintain a certain pressure for the necessary sections of the mattress;
• compressor operation provides a blowing and relaxing massage effect.

Thus, there is no need for the constant presence of a person next to the patient.

Always remember that if you use a mattress at home, you must first consult with your doctor about choosing the best product option. Calculate the degree of inflation of the mattress, its equipment according to the circumstances and complexity of the disease.

PPP → 418 E-EASY AIR

The development of bedsores in bedridden patients

Prolonged pressure on the same part of the body leads to impaired blood circulation in tissues and the formation of bedsores. Most often, immobilized bedridden patients suffer from bedsores. Such patients have to be turned over every 1-2 hours, while the friction and stretching caused by turning over can also provoke decubituses. Modern anti-decubitus mattresses allow for effective prevention of pressure sores.

Features of anti-decubitus system Easy Air 418 E

Easy Air 418 tubular anti-decubitus systems are recommended for the prevention and/or treatment of moderate to high risk pressure ulcers.

The preventive effect of the anti-decubitus system is based on the periodic change of points of support of the patient lying on the mattress. The tubular anti-decubitus mattress 418 E consists of eighteen chambers that alternately deflate and fill with air. An independent tubular system allows you to replace the failed air chamber, extending the life of the mattress. The work of the system contributes to the restoration of blood circulation in various parts of the patient's body and prevents the occurrence of bedsores.

Anti-decubitus mattress with compressor Comfort 9007

Anti-decubitus mattresses - a system for the treatment of bedsores

The main problem of a person with disorders of the musculoskeletal system is the lack of ventilation of the skin during prolonged stay in bed, resulting in complications in the form of necrosis of soft tissues - bedsores. Our company offers to buy anti-decubitus mattresses with a compressor that:

• They are an excellent preventive measure.
• Provide a massage effect on the patient's body.
• Quiet operation for better recovery.

You can buy equipment for bedridden patients in our store of the optimal model at a bargain price. The goods will be delivered to the buyer at home or to the rehabilitation department of your choice.

Functionality

Anti-decubitus systems for medical beds have a special pump that independently fills the chambers of the device with air, creating massage Effect. There are two main types of equipment:

• honeycomb format. The cell mattress resembles a honeycomb, where each section alternately inflates with air or descends in a checkerboard pattern. To carry out the prevention or treatment of bedsores with this type of mattress is for people whose body weight does not exceed 100-120 kg.
• Tubular model. The anti-decubitus system has several cylinders (tubes), which are filled through one using a compressor, thereby massaging the patient's body. Tubular models prevail over cellular models with two main features - high load capacity and comfort in service. The system is able to withstand a person weighing more than 130 kg, and in case of damage to one cylinder, it can be easily replaced with another one without harm to other pipes.

Mattresses with a compressor of the listed types belong to the dynamic type of product against bedsores. There are also static products that are necessary for a patient with serious complications of the musculoskeletal system, when any movements are contraindicated.

Prevention

Anti-decubitus treatment mattresses with a blower system can be used for prevention by healthy people, since in addition to their main purpose, they perform an additional massage function, which:

• Well relaxes the user's body, thereby relieving stress and muscle tension.
• Helps to get restful sleep. For sick and healthy people, it is very important to get enough sleep, since the well-being of a person and the duration of the rehabilitation period depend on it.
• Improves blood circulation and vascular function of a person in a supine position. With prolonged use of equipment with airflow, a good functioning of the internal organs is noticed.

Anti-decubitus mattress with ventilation has contraindications. Before buying a system for a patient with movement disorders, it is worth consulting with a doctor.

Service

Medical devices need proper care for long-term operation. For long-term use of the product, our experts recommend:

• Choose the device according to the characteristics of the patient. If you choose a product that does not match the patient's body characteristics, the material can quickly wear out, and the effect of using the system will be minimal.
• Wipe the surface of the mattress with soapy water or hygiene products with an odor-eliminating function. The procedure can be carried out using a washing machine, provided that the delicate mode is selected.
• Do not wring out mattresses and do not iron them after drying. This may damage the fabric structure of the product and provide the user with an unusable product.
• In the event of a breakdown of the blower mechanism, contact the manufacturer. In order to avoid damage to equipment with a compressor, it is necessary to regularly check the condition of the device.

With some diseases of the motor system, people constantly lie down. Over time, from the lack of movement, bedsores appear, which cause a lot of trouble to the patient. This makes you feel worse. For bed patients it is necessary with a compressor. More about it is described in the article.

The concept of bedsores

In people who have been in one position for a long time, due to constant pressure in the soft tissues, stagnation appears, blood circulation and cell nutrition deteriorate. If the pressure is more than 2 hours, tissue necrosis and bedsores appear. It affects the skin and subcutaneous tissue with muscles.

There are 4 degrees of bedsores:

1. First, there are spots on the skin - hyperemia, which does not pass even with the cessation of pressure. This lesion appears after 2 hours of lying down, if the position of the body does not change.
2. There is destruction of the skin, detachment of the epidermis.
3. The lesion affects the muscles.
4. A cavity is formed, reaching to the exposure of the bone.

Bedsores of the 3rd and 4th stages are treated with surgical methods. Prevention of this disease is an important part of care. An anti-decubitus mattress with a compressor will be the best helper, as it will alleviate the patient's condition. According to the reviews of buyers of mattresses, it is clear that it is better to purchase a quality product that will last a very long time.

Before you buy an anti-decubitus mattress, you need to determine:

1. Who will it be for?
2. What is the stage of bedsores.
3. What is required and how will it help.

Based on these criteria, the product is selected. With it, it will be possible to prevent circulatory disorders, so that bedsores can be avoided. Buyers are advised to be careful about the choice of goods, because the quality of the product affects the patient's condition. The anti-decubitus mattress "Armed" with a compressor is in demand, which makes it possible to improve a person's well-being.

Buying factors

When choosing a mattress, you need to pay attention to several nuances:

1. Material. Typically, products are made from PVC film or rubberized fabric. The first material is easier to clean, and the second will be more comfortable to lie on.
2. The presence of a blowing system. With it, a person sweats less, which is necessary for treatment.
3. Compressor operation. It is important that it operates silently - up to 5-10 dB.

As can be seen from the reviews of people, products from well-known manufacturers are in demand. They have proven themselves to be efficient and reliable. It is better to buy a quality product right away than to save money and then buy a new one.

static

These products do not move or move due to external control units of the system. Mattresses are considered autonomous, they do not need to be connected to the mains and appliances. The products have an orthopedic anti-decubitus effect due to the distribution of pressure and adaptation to the anatomical features of a person.

Mattress benefits include:

1. Affordable price. This is due to the lack of compressors and other equipment.
2. Electricity is not required, as the products are autonomous and can be used where there is electrification.

This is an anti-decubitus mattress without a compressor, which can be used for certain diseases of the musculoskeletal system. Whether to choose it or not depends on the disease of the person. As the reviews indicate, it is advisable to consult a doctor before choosing a product. Based on the condition of the patient, the specialist will determine the appropriate type of mattress.

Of the minuses are:

1. Low efficiency.
2. Cannot be used on completely immobile people.

Dynamic

These products are of advanced design. Their surface constantly floats, and some sections inflate and deflate. Due to the influence of such waves, soft tissues are mobile, because the pressure increases and weakens. As a result, this acts as a prevention of the appearance of bedsores.

Anti-decubitus mattress with compressor is almost silent. By forcing air into some sections and releasing its pressure, a movable surface is created, which protects against pressure sores. For this design to work, a source of electricity is needed.

The benefits of mattresses include:

1. Excellent mobility, which ensures high-quality therapy.
2. Holding a lot of weight.

According to reviews, dynamic mattresses are among the best. With their use, the human condition improves.

Of the shortcomings stands out:

1. High price, because it depends on the complexity of the structure and the presence of a compressor.
2. The products can only be used for immobile people.

Balloon

Dynamic anti-decubitus mattresses with a compressor are divided into balloon and cellular. The first products are created from separate sections. They should be chosen for people with a weight of 120 kg. There are models that use independent cylinders. They are reliable because the individual cylinders are easy to change. The action of the devices is based on the fact that the pressure is constantly changing, due to which a massage effect is created, which eliminates bedsores.

It is this principle of operation that the anti-decubitus mattress with the Orthoforma compressor has. The pressure changes every 6 minutes, due to which human tissues are massaged and moved. Only the maximum weight of the patient should be 135 kg. Reviews about this product are extremely positive. Buyers appreciate the product for its practicality and long service life.

The advantages of the product are as follows:

1. Uncomplicated design. Balloon mattresses are easy to handle.
2. Complete with independent cylinders, they can be changed.
3. Great for heavy people.

The minus include a smaller massage effect when compared with products with cellular types.

Cellular

The anti-decubitus cellular mattress with the MT-303 compressor is in demand. It is created according to a cellular scheme, provides an orthopedic effect. The structure is considered efficient because it works evenly. If individual parts are inflated in the balloons, even and odd rows of cells, similar to honeycombs, are inflated here. Cellular mattresses are also appreciated by buyers, as evidenced by numerous reviews on the Web.

This mattress has an automatic compressor that can work around the clock. The pressure changes after 6 minutes - one row deflates and the other one inflates. The product is made from environmentally friendly materials that do not cause allergies. This model has laser perforation that optimizes skin moisture, which also protects against bedsores.

The advantages of the product are as follows:

1. The presence of a massage effect - it creates excellent conditions for protection against bedsores.
2. Possibility of use for people with a high level of pressure ulcers.

The disadvantage is that the product does not withstand heavy people. But up to 100-120 kg it is ideal. Anti-decubitus tubular mattress with compressor "Armed" is also of high quality. It is made from polyvinyl chloride. The product contains many cells in the form of honeycombs. They inflate with a certain rhythm - you can set the parameters thanks to a simple remote control. The antidecubital cellular mattress with the Armed compressor has reasonable cost.

With laser perforation

The appearance of bedsores is associated not only with being in one position. Their occurrence is also affected by the moisture content of the skin, which does not breathe. This requires a mattress with laser perforation - thanks to microscopic holes, the air pumped by the compressor is released to the outside. This allows you to perform a small airflow and the rapid elimination of excess moisture.

Among the advantages of the product, the following can be distinguished:

1. Breathing of the skin helps protect it from the appearance of bedsores.
2. Rapid removal of moisture also serves as protection against skin damage.

But such a product will cost more than a product without perforation. This product has already become popular with customers due to its effectiveness. For many patients, doctors advise just such a device.

Tubular

Among the large assortment of goods, it can be difficult for buyers to navigate. Anti-decubitus tubular mattress "Armed" with a compressor is considered a common balloon product. Such a device has the same properties, so it can be safely chosen for patients. An anti-decubitus tubular mattress with a compressor will be an excellent therapy for a person who is forced to remain immobile.

Which mattress to choose?

The type of anti-decubitus mattress with a compressor depends on the stage of the disease. If it is needed for prevention or for a disease of the initial stage, then a product with small cells that work thanks to a compressor is needed. This will be carried out unevenly - different cells will be filled with air. This action allows you to change the body's support points and perform tissue massage, eliminate the causes of bedsores.

How not to harm the patient?

During the operation of mattresses, in order not to harm a person, it is necessary to adhere to safety regulations. It is important to properly handle the compressor and power supply. Before use, you must read the instructions that each product has.

Moreover, the compressor must be given importance. It should not be located near heaters or other heating devices. It must be placed away from water. Do not place the device on the aisle. It is advisable to install it near the bed or on the wall of the bed. According to reviews, buyers are advised to first check the operation of the mattress before putting the patient on it.

How to work with the compressor?

1. When the device is turned on, it is desirable that someone be near the patient. Unused device from the network must be turned off.
2. The compressor must constantly work and change the pressure in the cells, filling them with air.
3. It is necessary to connect the power supplies to the mains, checking that there is no damage.
4. A plug with three prongs must be connected to the network using an adapter.

Terms of use

The mattress should be placed so that the sections with air are at the top, and the tubes for connection are at the feet of the patient. After spreading the product, its ends are hidden under a regular mattress. Then you need to put a sheet on it, and if there is no airflow, then a diaper that absorbs moisture.

Before shifting the patient, the product should be checked - it must be in good condition, and all sections must be working and with alternating pressure. It is important that the optimum pressure is set. Then the product will have a positive effect.

Mattress care

In order for the product to serve for a long time, it requires special care:

1. It should only be cleaned when inflated. For this, a soft material is used, which must be moistened in water or a chlorine solution.
2. Do not use products with alcohol or dyes.
3. Drying should be done in a dark place. It is forbidden to use a damp mattress for its intended purpose.
4. The product cannot be ironed.
5. The compressor must be wiped, only before that it should be disconnected from the mains.
6. The air supply unit should be wiped with a damp soft cloth 2 times a week. It cannot be cleaned with abrasive products.
7. When the device is wiped, it should be connected to the network to check its operation.
8. Storage is carried out after the air has been vented and separated from the compressor.
9. Store the product in a dark dry place (from +5 to +20 degrees).

Thus, an anti-decubitus mattress is an excellent helper for bedridden patients. The product makes it easier if you can not move on your own. You just need to choose it based on the condition of the patient, so that the result from use is positive.