What kind of corrugated board is needed for the fence: the subtleties of choice. Decking for the fence - which one is better to choose considering the operating conditions Types of corrugated board for the fence

Decking is a steel sheet that has gone through several stages of processing: priming, passaging, galvanizing, applying a polymer layer (in some cases). The reliability of the fence is significantly increased through the use of special equipment, as a result of which the material acquires a profiled look.

Profiled sheet advantages:

• technical characteristics that are not inferior to metal and stone;
• ease and speed of installation (a medium-sized area can be fenced in one day);
• a wide range of colors;
• affordable cost;
• sheet is easy to cut.

How to choose a corrugated board for a fence? Which is better?

There are several varieties of profiled sheet, the main differences are in the coating material. Like any metal, the profiled sheet is subject to corrosive processes that shorten its service life. To protect the corrugated board from atmospheric precipitation, a special coating is applied to its surface. The most common metal-colored profiled sheet is covered with a thin layer of zinc, which provides reliable protection. This option is distinguished by affordable cost and fragility, so colored sheets are in great demand.

Leaf coloring adds an extra layer of protection, There are two main types of coatings:

1. polymer coating. A layer of synthetic resin or polymer is applied to the galvanized sheet, which increases the level of protection of the material. The polymer also has excellent insulating properties, it can be painted in any color at the production stage.
2. Plastisol provides the most reliable protection, 175-220 microns is considered the thickest protective layer. The coating shows high resistance not only to atmospheric phenomena, but also to mechanical stress. The profiled sheet coated with plastisol is distinguished by its high cost and long service life.

It is worth noting that every year something new appears on the market, so the choice depends only on individual preferences.

Marking

Profiled sheet characteristics can be found from the marking, which indicates its type, sheet thickness, width, wave height

To date, there are several variations, for which letters are used:

• H- bearing profiled sheet, designed for installation of roofs and ceilings;
• FROM- wall, used for the construction of fences, walls of outbuildings;
• NS- universal, in demand in a variety of works, including in the construction of fences.

What thickness?

Width and height when choosing corrugated board for the fence does not play any role, the only thing what to pay attention to- this is the shape and thickness of the waves, the last factor determines the strength of the sheet.

When choosing, you must also pay attention to the fact that the fence, unlike the roof, not designed for heavy loads, therefore, it does not make sense to build a fence from a thick profiled sheet. The best option for the fence is 0.1 mm.

The second thing to pay attention to is corrugation height, this parameter is also determined by the nature of the loads. 21 mm is enough for a fence, sheets with large sizes can also be used, but do not carry any practical benefit.

It is worth noting that professional sheet of large thickness with large corrugation differs in higher durability and cost, for construction of a fence it is recommended to choose material with the above characteristics.

The outer fence not only serves as protection against intruders, but also partially performs the function of decorative design of the local area. It is possible to equip such a structure with high quality and inexpensively, if you know which corrugated board is better for the fence. There are also some nuances in using this relatively budget material. Let's try to understand them and take into account the main features during installation and operation.

What should be taken into account?

When choosing a material for a fence, you need to consider not only the appearance and cost, but also the quality of the product. It is necessary to determine which corrugated board is better for the fence at the design stage. Poor quality eventually undergoes peeling and burnout.

When choosing a material, the following factors must also be considered:

• The thickness of the metal.
• Corrugation height.
• Durability of the outer coating of the sheet.
• Dimensions of the elements of the fence.
• Type of fastening and racks.
• Norm in the number of square meters or sheets.

As a result, you will get a simple answer to the question of which fence decking is better to choose: a material that corresponds to the optimal combination of price and quality, as well as to the overall exterior in terms of color and design configuration.

Characteristics of a metal profile

Any kind of material under consideration consists of a thin one. It undergoes a process plus the operations of passivation, priming and final spraying. It can be double or single sided.

For example, the inner side can be coated with a paint layer, and the outer part can consist of polymer components. Such processing allows to achieve good strength and resistance to aggressive external influences. Depending on the quality of processing, the parameter of noise and thermal insulation increases, and the resistance of the structure to frost increases.

Which fence is better to take? Experts recommend using sheets with a thickness of at least 0.5 mm. This is due to the fact that the estimated working life of each one tenth of a millimeter is about five years of operation. When choosing a metal profile for a fence, give priority to the quality of the material and manufacturers, which we will discuss below.

Which corrugated board is better for a fence?

Hundreds of companies produce the material in question. It is not easy to choose sheets that meet the required parameters. Below is a list of popular and trusted manufacturers operating in the domestic market:

1. European manufacturers - Myriad, Voest Alpine, Salgitter, Alzelor, Ruukki.
2. Domestic brands - Severstal, NLMK, MMK.
3. Other manufacturers are Tata Steel from Turkey, Mital Arcelor (Poland).

What thickness of corrugated board is best for a fence? The above firms comply with the required dimensions. And the worst option would be a Chinese counterpart from unknown companies, the thickness of which may not even reach 0.34 millimeters. This design resembles more foil than a full-fledged material for arranging a fence.

Criterias of choice

An important point is the processing of the profile on the machines. This option plays one of the most important roles in which corrugated board is better to use for the fence. A defective batch will last a very short time, which means a lot of trouble associated with the installation and maintenance of the structure.

Another significant parameter is the introduction of zinc. According to GOST, the coating must include at least 275 grams of this component per square meter of sheet. Unfortunately, this aspect is often underestimated by 1.5-2 times. The importance of the component lies in the anti-corrosion properties that determine the working life of the fence.

A few indicative tips on the characteristics of a metal profile:

• The optimal sheet thickness should be at least 0.4 mm.
• The inclusion of zinc - from 140 grams per square meter of material.
• Thicknesses greater than 1.2 millimeters are also impractical due to increased cost along with similar strength.
• It is advisable to choose a product manufactured by a trusted manufacturer.

Profile types

Before deciding which corrugated board is better for a fence, let's dwell on the type of profile. In this case, one of the main characteristics is the height of the wave and its shape. As fences, products with the marking "C" or "CH" are most often used. The height of the corrugation is marked with digital designations, from 8 to 25 millimeters. The large dimensions of the corrugations cause a smaller size of the working plane. For grades C8 and C10, the optimal width will be 1150 mm, for other modifications - no more than 1100 mm.

The strength and rigidity of the sheet depend on the shape of the corrugation. The lowest indicator is noted for the material of category C8. The configuration is divided into several types, namely:

1. Wave-type corrugation, reminiscent of building slate in design.
2. Trapezoidal configuration (characterized by increased rigidity).
3. Cassette form of U-shaped type.

The mass of the sheet of the material under consideration is from 4.5 to 12 kilograms per square meter. This difference is due to a number of characteristics (metal thickness, corrugation height, additional coating).

What kind of corrugated board is better to make a fence?

Determining the answer to this question, it is necessary to consider the types of sheet coverage. There are a lot of options here. Given their features, you can easily choose the best option based on the specific situation. Let's start with the most popular types:

1. Hot dip galvanizing method. This design is characterized by good metal protection against corrosion. In this case, the amount of zinc should be at least 140 grams per square meter.
2. Aluzinc. A coating similar to the previous version, but significantly superior in strength and durability.
3. Lacquer finish. This form of treatment makes it possible to protect the metal due to the formation of a film, and also gives a beautiful appearance to the sheets. However, it is subject to mechanical damage.
4. When choosing which fence profile is best from corrugated board, pay attention to It has a wide range of colors and thickness. Below we consider the varieties of this material.

Polymer coatings

Each type of this coating has its own advantages and disadvantages:

1. Glossy polyester belongs to the budget category. Its thickness is about 25 microns.
2. The matte analogue is almost identical in composition to the above material, its thickness reaches 35 microns.
3. Plastisol refers to decorative polymers. The composition of the material includes PVC and plasticizers. The thickness of this option is 200 microns. The covering differs in resistance to atmospheric and mechanical influences. The surface structure can be done with a texture pattern under the skin or with a stroke resembling a birch bark. The coating has its own properties, color palette and thickness standard.
4. Pural. Pay attention to this material, because, being interested in what thickness it is better to choose a corrugated board for a fence, many people think that the thicker the sheet, the better. The considered polyurethane coating, although it has a thickness of 50 microns, is highly durable and resistant to aggressive influences of any type.
5. PDF (PDF). This material consists of 80 percent polyvinyl chloride and 20 parts acrylic. The coating has a tolerance for temperature changes, does not fade, and is optimally suited for installation on sea coasts.
6. "Printek" (Printech). An innovative type of polymer that mimics various natural materials, including wood or stone. The coating is applied by offset printing, thickness - up to 35 microns, resistant to salt, thermal and acid influences.

Rack selection

Which pipes are best for a corrugated fence? Experts recommend using two types of racks. Pipes of profile or round section are suitable as vertical supports. For logs, profile-type elements with a rectangular or square cut are mainly used.

It follows from this that for the type of fence under consideration, two types of rolled metal pipes are needed. This makes it possible to save on the purchase of expensive cross-sectional analogues. It is worth noting that vertical racks should have an increased diameter, and thin options are suitable for horizontal floors.

Rack dimensions

Vertical supports are recommended to be selected with a size of 60 millimeters in diameter. If the height of the fence exceeds 2 meters, this value increases to 80 mm. Round pipe due to the high price for racks is used extremely rarely. Most often, profile analogues with a cross section of 60 * 40 mm or 80 * 60 mm are used.

The total length of the vertical supports is determined taking into account the height of the building. 30 percent of the underground part is added to the total value. The number of pillars is calculated based on the total perimeter, approximately two elements per meter. As a log, only a profile pipe is used. Such elements are much more convenient when installing horizontal ceilings. In addition, fixing the profile itself is facilitated. Log size - 40*20 mm.

Installation Features

Below are the mounting options for corrugated fence posts:

1. In the first version, the support is driven into the ground by a third of the length of the rack. This method is fraught with the possibility of the column deviating from the vertical.
2. The bored method consists in immersing the rack into a drilled socket. The supports are fixed by filling the shafts with cement mortar. This method of installation is very reliable, but requires a significant amount of time.
3. Stuffed option. The post is fixed in the nest with sand and gravel bedding.
4. The screw version resembles the method of installing piles. The structure is screwed into the ground like a self-tapping screw.

In conclusion, it can be noted that a fence made of corrugated board is a completely reliable and durable construction, which is distinguished by a variety in color and texture.

The abundance of building material has led to the fact that even the construction of a high-quality fence is impossible without assessing all the characteristics of a profiled sheet, corrugated board and other sheet material for work.

Types of profiled sheet

Under the profile sheet is meant a material intended for cladding, roofing and other construction needs. Without it, you can’t build external fences and roofs.

The classification of the profiled sheet is the difference in thickness, height of the stiffeners and the difference between them.

But the types of profiled sheets are better described in more detail:

• Scope (facades, fences, walls, roofing or supporting structure);
• Corrugation (wave or trapezoid);
• Corrugation height. There are also limitations here. Stiffeners up to 21 mm are for walls, up to 44 mm are fences, gates. A corrugation of more than 5 cm goes to those parts of the structures where there will definitely be a load on the material. For example, fixed formwork, various building floors, roofing and other types of construction.
• Profile width;
• The thickness of the sheet itself;
• Full and useful sheet width.

Profiled sheets are also distinguished by coatings, because “bare steel” must be protected with polymers or paint, or rather:

• acrylic coating;
• polyester;
• Plastisol (polyvinyl chloride);
• Polyvinylidene fluoride;
• Polyurethane.

Is there a difference between corrugated board and corrugated board

There is a difference - this is the purpose of universal sheet iron. The above views are created for a specific task. If in detail, then the profiled sheet is taken during construction:

• Fence;
• Walls;
• Roofs;
• Some overlaps.

The material is almost the same, but!

Naturally, for each of the works it is sorted according to its characteristics, which is what makes it different.

Let's take an example. For the construction of the fence, you will need a profile sheet with the “smallest” wave (up to 21 mm), because the load on the material is not expected in the future (or used galvanized C 10). But the roof view is also suitable for this work, however, at a price it is higher due to the rigidity characteristics.

We come to the conclusion: corrugated board is a material for roofing and for those construction sites where a load is provided. A profiled sheet is a sheet of iron with a weak rib, invented specifically for arranging fences and house cladding. That is the difference.

comparison table

Now, when buying a profiled sheet, they are guided by two proposed types:

• Wall;
• Roofing.

But the "fence" version of the material is better to choose according to the following criteria:

1. Operational nuances. It is always necessary to take into account the option of fastening the material, its type of installation (vertically or horizontally). If there are additional crossbars for fasteners.
2. Thickness. A thin sheet on the total length of the fence with a large distance between the supports can bend, “make noise” during strong winds. The excess weight of profiled sheets is a load on the crossbars and poles. Sometimes it is precisely because of the ill-conceived mass that the finished fence is skewed.
3. The rigidity of the material. Without stiffeners, there will be no structural density. They are necessary even in those places where there will be no load on part of the fence.
4. External decor. These are aesthetic preferences of an individual nature. You can select by color or shade, focusing on the overall color scheme of the surrounding buildings. Sometimes, when choosing, those colors are chosen that do not “burn out” in the sun in a short time.
5. Zinc is cheaper. The galvanized surface of the sheet without a decorative component is an excellent option for a budget and high-quality fence for a long time. Such sheets do not give in to moisture, do not fade over time. And they always look neutral on the outside. What else is needed for an iron fence?
6. Learn more about galvanizing. Checking the galvanized or aluminum top layer is a must. The manufacturer always indicates this characteristic. For example, for a profiled sheet thickness of up to 0.5 mm, there should be a value of 200 g / m2. Galvanization above 200 g/m2 indicates the best quality of the sheet. But when even the thinnest type of profile sheet has some 70-80 g / m2, then it is recommended to refuse to purchase, even if the material goes to partitions or the simplest type of fence.

Fences from a professional flooring and a professional leaf

Even without work experience, erecting a good fence from a profiled sheet or flooring with your own hands is a feasible task.

Important! When buying, we do not save on material, consumables and delivery. Otherwise, the service life will be halved.

Installation work will require:

1. Decking or profiled sheet of the desired color. What thickness? 0.5 to 1.3 mm;
2. Pipe or profile for poles. Can be used as well. Profile of smaller diameter for log;
3. Solution: sand, cement (300-400), crushed stone;
4. Measuring tool: level, rope stretched along the horizon;
5. Welding;
6. Screwdriver (drill). If the fasteners cannot cope with the thickness of the iron, then holes are pre-drilled;
7. Fastener itself. Ideal: self-tapping screws of the required length and rivets (installed with a slapper). It happens that sheets sometimes disappear from areas where there is no constant presence of the owner. Therefore, it will not be superfluous to equip the profiled sheet with rivets over the entire area. Yes, and this type of fastener is the most reliable.

Working moments

1. We mark the area, for example, in the country. This applies to gates, gates, poles and planned objects in the future. Advice! The distance between the posts is from 2 to 2.5 meters. No more!
2. We start with poles. It is best to buy a square profile of 50 mm more. But we also allow a round version of the pillar. Before installation in the ground and pouring, it is desirable to weld any type of pillar from above so that there is no accumulation of moisture.
3. The depth of the pit for supporting pillars is 1/3 of their length. It turns out that if the pillar is 3 meters, then the pit is 1 meter. This is the standard that has been proven over the years. It is better to dig holes as early as possible.
4. Fence posts poured into the soil are fixed with mortar. At this time, you need to do lags. Their fastening always begins with a plumb line.
5. We fasten the profile sheet to the frame. We start with self-tapping screws, where we take into account the distance (step) of no more than 50 cm. Moreover, the sheets need to be fastened together only with an overlap, leaving 10-15 cm for the next part of the fence. So the overall structure will only become stronger.

Which fence is best

A steel sheet fence can be called the best if:

• The construction was carried out with their own hands or under the guidance of the customer;
• Desired sheet thickness. But what thickness of the profiled sheet for the fence to order? Not more than 1.3 mm.
• Soil features are taken into account. Soft soil will definitely shrink in 2-3 years. In this situation, it is better to arrange a small strip foundation along the entire length for reliability;
• We did not save on the professional sheet. Selected high-quality material with the desired level of galvanization;
• When paint sheets are selected for work, scratches are a matter of time. It is better to buy for such material aerosol with the same type of paint, and the original appearance is guaranteed for the entire service life.
• There is a combination of or . Now professional sheet under a stone is on sale everywhere. Sometimes the front part of the fence, closer to the gate, is decorated with forged elements. It will look very expensive and rich. And in the neighborhood such a fence will be recognized as the best!

A fence made of corrugated board under a brick can be seen in the title photo.

Results

What kind of fence is better to put in a private house? One of the best options is from iron on a square profile with a capital mount.

The erection of fences on a steel frame with corrugated sheet cladding remains one of the most popular and inexpensive ways of fencing territories today. How successful and durable the fence will turn out depends on two conditions. First you need to choose the most suitable rolled profile for the frame base of the fence, the second condition is to correctly select the profiled sheet for the fence, taking into account the characteristics of the entire range of material.

Which profiled sheet is better for a fence

There are several basic brands of profiled sheet. All of them differ in weight, strength and, most importantly, the cost of the material. Therefore, when choosing, you will need to choose the optimal ratio of price, strength and durability of the material. The difference in the cost of the optimal and non-optimal version of the profiled sheet for the fence can differ significantly, therefore, the profiled sheet for the fence is chosen taking into account the main characteristics of the sheet material:

• Based on the size of the fence, primarily its height and the number of rows of horizontal runs;
• Further, based on the optimal height of the profile and the thickness of the metal, the grade of the profiled sheet is selected;
• As additional conditions, the method of fastening the sheet and the most suitable protective polymer layer covering the metal surface are selected.

Profiled sheet manufacturers produce three main brands: wall C8 - C21, bearing H, HC35 - H75 and universal MP20 - MP35. The C-profile sheet has the smallest metal thickness and wave dimensions, the height of the profiled rib can vary from 8 to 20 mm.

Note! It is more economically advantageous to use the thinnest material for fencing with a wave of 6-12 mm and a metal thickness of 0.45-0.5 mm.

How to determine the optimal parameters of a profiled sheet

The dimensions of the profiled sheet for the fence must correspond to the height of the profile. Most often, for reasons of economy, the fence is built according to the minimum dimensional grid. This means that the height of the fence is chosen to be the minimum required. To close the yard space with a fence, for 99% of people it is enough to install a profiled sheet with a height slightly higher than the average height of a person, with a small margin. For corrugated board with a size of 2.0 -2.5 m, the weight of one C8 fragment will be about 5 kg, so the total load on one section of the fence, with a distance between the posts of 2.5 m, will be very small - within 40 - 50 kg.

For three-meter fences, often used for fences, the thickness of the profiled sheet and the height of its wave have to be increased in order to achieve the necessary rigidity and strength of the fence structure. In this case, profile C20-21 is used.

It has to be done, for one reason. For a C8 profiled sheet two meters high, with a wind speed of 15-20 m / s, the horizontal load per meter of a running sheet can increase to 30 kg / m. The upper edge of the sheet protrudes 20-30 cm above the horizontal crossbar. If the wind blows with such force, without changing direction, during the day, the upper edge of the sheet will gradually turn into a curved accordion. The more stiffeners, the more stable the fence fabric. Therefore, for high fences, it is required to use a more powerful and rigid profiled sheet.

Which protective coating is best

From the existing range of profiled sheets for installing fences, you can buy material with the following types of protective coating:

• layer of electrolytic zinc. The cheapest and most resistant to scratches and surface damage coating. Due to the weak decorative effect, the galvanized profiled sheet is used for secondary secondary fences;
• Polyester coating it is characterized by a low price, resistance to ultraviolet radiation, temperature extremes, but at the same time it is quickly abraded by air currents with a large amount of sand;
• The most durable and expensive is considered coating based on modified polyvinyl fluoride. For a fence, this option can hardly be recommended due to the high cost of the material. Most often it is used for roofing in areas with air heavily polluted by industrial emissions;
• Used for abrasive loads profiled sheet with a thick, 200 micron layer of modified PVC plastic - plastisol. This protection option does not like sunlight and high temperatures.

Note! If a plastisol-PVC-coated profiled fence is overshadowed by the shadow of trees or buildings, due to the uneven fading of the dye, this can lead to staining.

Any polymer coating attracts a large amount of dust, so the fence has to be washed regularly with a high pressure washer.

Installation of profiled sheet on fences

The installation of sheets on the prepared fence frame is carried out by the roofing method, that is, with an overlap of at least one wave. To avoid material loss for trimming, the width of one sheet is chosen as a multiple of the distance between the fence posts.

How to attach a profiled sheet to a fence

The scheme for fastening the profiled sheet is selected based on the method of assembling the supporting frame of the fence:

1. With full support coverage. In this case, the horizontal transverse beams are welded in the form of one continuous line, the support remains extended beyond the plane of the canvas. After installation, the fence looks like one continuous surface;
2. With the selection of vertical pillars and the division of the fence into equal segments. In this case, for each run, you have to sew a profiled sheet with an individual size adjustment. If the columnar supports are lined with rubble or facing bricks to emphasize the features of the building and enhance the overall impression of the structure, the crossbars are fixed with the separation of vertical columns from the common fencing web.

Usually in this way they make out the "ceremonial" sections of the fence from the profiled sheet, enclosing the entrance and the facade of the building. Options with hidden poles are cheaper to build and are used for all other fencing methods.

Features of using mounting screws

Of all the methods of fastening a profiled sheet, the most convenient specialists recognize fixing the cladding with the help of building screws. This method is especially good for the thinnest profiled sheet.

The powerful head of the self-tapping screw allows you to use a screwdriver to screw in the fasteners, so the installation speed of the profiled sheet can be measured from 2 to 5 meters per hour. The thickness of the profiled sheet makes it easy to pierce the metal with a drill tip on the tip of the self-tapping screw and screw the fasteners into the beam wall in a few seconds. A silicone washer-gasket must be placed under the head, compensating for temperature and wind stresses in the profiled sheet.

Installation of the profiled sheet begins with the corner post of the fence. When installing sheets, fastening is carried out on depressions near the pillars, in the central part of the span. If there are sharp gusts of wind in the area where the fence is planned to be installed, it is necessary to fasten the sheets to the crossbars every two waves. In addition, it is imperative that in places of overlap on the "ridges" adjacent sheets are interconnected by a pair of additional self-tapping screws.

After installing the cladding, several cosmetic operations are performed. From the inside of the structure, the points of entry of self-tapping screws into the beam must be blown out with varnish, silicone or just enamel paint. Most often, the fence from the profiled sheet fails due to rusting of the fasteners.

To give the fence a more elegant look, the upper edge is closed with a decorative U-shaped overlay. For each type of profile, manufacturers produce their own version of the lining; during installation, it simply snaps onto the edge of the sheet.

Conclusion

Undoubtedly, the fence from the profiled sheet looks quite modern. But such a fence has a drawback - it can be easily disassembled by unscrewing the heads of the screws. To prevent this from happening, many building owners disable hex heads with a welding machine or hammer.

The ideal corrugated board for the fence should have not only galvanization on both sides, but also a polymer coating, at least from the front. This, of course, will increase the cost of the sheet itself, but it will give an aesthetic appearance to the fence and additional protection of the front part of the structure. You can consider an unusual profiled sheet for installation, but with imitations of masonry made of stone and brick, or with a pattern of a wooden surface.

Grades of corrugated board for the fence

• H (bearing) - for roofing and ceilings;
• C (wall) - for a fence and small metal buildings;
• HC (universal) - both for roofing and for installing fences.

Therefore, the corrugated board for the fence can be marked C and HC. But for the construction of metal fences, brands are usually chosen: C8, C10, C18, C20. The higher the wind load in the area where the fence is installed, the higher the numbering of the profile will be required. For fences above 2 meters, it is better to take the marking C20 and C21.

Profiled sheet parameters for fencing

For the manufacture of corrugated board, rolled steel is used, which allows you to set any required length. In the design, this indicator can serve as both the height and width of the structure. But the width of rolled steel is usually standard - from 1 meter to 1.8 meters. Much more attention is paid to the thickness of the corrugated board when buying. For a fence, it makes no sense to take a very dense and heavy profile, but it should not be thin either - this increases the chances of damaging it. The optimal thickness of the profiled sheet for fencing is 0.45-0.5 mm.

A sheet of 0.4 mm is also acceptable for the design, but it is already considered from the category of budget products, slightly falling short of the ideal. Another important indicator is the height of the wave (or corrugations). For a fence, its high value is not acceptable, otherwise it will look like an accordion: such a sheet is more suitable for roofing. The appropriate height of the corrugation for a two-meter fence is no more than 21 mm. All important parameters of the profiled sheet are indicated in the marking in order:

• Profile height;
• sheet thickness;
• Profile width;
• Sheet length.

Color palette of corrugated board

Colored corrugated board makes the metal fence of the private sector prettier. But the decorative layer can be made using powder coating, or with polymer coating technology. Only the latter guarantees a rich and durable color. Colored polymers are found in about 30 color variations from the RAL or RR table, which allows you to choose the right shade for fencing around a residential or industrial building. The polymer layer can be applied on both sides or only on one side. There is also an innovation in decorating a profile for a fence - a print imitation of various surfaces. Such a decorative layer is also reliable in long-term operation.

Prices for corrugated board

A good profiled sheet with an optimal thickness and a polymer coating costs around 400-500 rubles per sheet. For 700 rubles or a little higher with a standard thickness, sheets are sold that have a decorative coating that looks like wood, stone or brick. Ordinary galvanized corrugated board with an acceptable thickness of 0.4 mm can be bought for 350 rubles, but it is possible that after a couple of seasons, some segments of the fence made of such material will have to be replaced.

Installation of corrugated board on the fence frame

What is great about building a fence from corrugated board is that the work is done in a short time and does not require any special skills or any special tools. To mount the sheet on the frame, a drill is enough (take a drill about 3.9 mm), a screwdriver and galvanized self-tapping screws with a rubber gasket. Additional hands are not needed - the corrugated board is not heavy, so you can hold it and screw in the screws at the same time. You may also need a plastic profile, which will help to carry out the fastening of self-tapping screws at the same level.