| Instructions for the position " Painter of motor vehicles of the 3rd category", presented on the site, complies with the requirements of the document - "DIRECTORY of qualification characteristics of workers' professions. Issue 69. Motor transport", which was approved by the order of the Ministry of Transport and Communications of Ukraine dated February 14, 2006 N 136. With changes approved by the order of the Ministry of Transport and Communications of Ukraine dated September 4, 2008 N 1097. The status of the document is "valid". |
|
Preface to job description
0.1. The document comes into force from the moment of its approval.
0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
0.3. Document approved: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
0.4. Periodic verification of this document is carried out at intervals not exceeding 3 years.
1. General Provisions
1.1. The position "Painter of motor vehicles of the 3rd category" belongs to the category "Workers".
1.2. Qualification requirements - complete general secondary education and vocational education without requirements for work experience or complete general secondary education and vocational training at work. Advanced training and work experience in the profession of a painter of the 2nd category - at least 1 year.
1.3. Knows and applies:
- techniques for preparing paints, varnishes, mastics, putties, putties according to a given recipe and consistency;
- the purpose and conditions for the use of mechanisms, devices and tools that are used in painting work;
- ways to perform paint coatings of parts and components of cars;
- grinding methods;
- grinding materials and their physical properties;
- recipes for the preparation of paints, varnishes, mastics, fillers and putties;
- methods of mixing paints and varnishes according to a given recipe to obtain the desired color and shade and determining the quality of paints and varnishes that are used;
- rules for the storage of solvents, paints, varnishes, enamels;
- modes of drying paint and varnish coatings.
1.4. The painter of motor vehicles of the 3rd category is appointed to the position and dismissed from the post by order of the organization (enterprise / institution).
1.5. The painter of vehicles of the 3rd category reports directly to _ _ _ _ _ _ _ _ _ _ .
1.6. The painter of motor vehicles of the 3rd category directs the work of _ _ _ _ _ _ _ _ _ _ .
1.7. The painter of vehicles of the 3rd category during the absence is replaced by a person appointed in the prescribed manner, who acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.
2. Description of work, tasks and job responsibilities
2.1. Carries out isolation of the places which are subject to coloring.
2.2. Prepares anti-corrosion materials, applies mastics, putties.
2.3. Dries treated surfaces.
2.4. Degreases body surfaces.
2.5. Carries out priming of a surface of a body where old paint is completely removed.
2.6. Apply putty to defective areas.
2.7. Carries out polishing of puttied places.
2.8. Primes and paints prepared surfaces.
2.9. Knows, understands and applies the current regulatory documents relating to its activities.
2.10. Knows and fulfills the requirements of regulatory acts on labor and environmental protection, complies with the norms, methods and techniques for the safe performance of work.
3. Rights
3.1. A Grade 3 Motor Vehicle Painter has the authority to take action to prevent and remedy any irregularities or non-conformities.
3.2. A motor vehicle painter of the 3rd category has the right to receive all social guarantees provided for by law.
3.3. A motor vehicle painter of the 3rd category has the right to demand assistance in the performance of his duties and the exercise of rights.
3.4. The painter of motor vehicles of the 3rd category has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision of the necessary equipment and inventory.
3.5. The painter of motor vehicles of the 3rd category has the right to get acquainted with the draft documents relating to his activities.
3.6. The painter of motor vehicles of the 3rd category has the right to request and receive documents, materials and information necessary for the performance of his duties and orders of the management.
3.7. A motor vehicle painter of the 3rd category has the right to improve his professional qualifications.
3.8. The painter of motor vehicles of the 3rd category has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.
3.9. The painter of motor vehicles of the 3rd category has the right to get acquainted with the documents defining the rights and obligations for the position held, the criteria for assessing the quality of the performance of official duties.
4. Responsibility
4.1. The painter of motor vehicles of the 3rd category is responsible for non-fulfillment or untimely fulfillment of the duties assigned by this job description and (or) non-use of the rights granted.
4.2. The painter of vehicles of the 3rd category is responsible for non-compliance with the rules of internal labor regulations, labor protection, safety, industrial sanitation and fire protection.
4.3. The motor vehicle painter of the 3rd category is responsible for disclosing information about the organization (enterprise/institution) that is a trade secret.
4.4. The painter of vehicles of the 3rd category is responsible for non-fulfillment or improper fulfillment of the requirements of the internal regulatory documents of the organization (enterprise / institution) and the legal orders of the management.
4.5. The painter of vehicles of the 3rd category is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.
4.6. The painter of vehicles of the 3rd category is responsible for causing material damage to the organization (enterprise / institution) within the limits established by the current administrative, criminal and civil legislation.
4.7. The motor vehicle painter of the 3rd category is responsible for the misuse of the granted official powers, as well as their use for personal purposes.
5. Examples of work
5.1. Paintwork materials - production.
5.2. Surfaces puttied - polishing.
Complies with the requirements of the document - "HANDBOOK of qualification characteristics of workers' professions. Issue 1. Jobs of workers that are common to all types of economic activity", which was approved by order of the Ministry of Labor and Social Policy of Ukraine dated December 29, 2004 N 336.
The status of the document is "valid".
Preface to job description
0.1. The document comes into force from the moment of its approval.
0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
0.3. Document approved: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
0.4. Periodic verification of this document is carried out at intervals not exceeding 3 years.
1. General Provisions
1.1. The position "Painter of the 3rd category" belongs to the category "Workers".
1.2. Qualification requirements - complete general secondary education and vocational education without requirements for work experience or complete general secondary education and vocational training at work. Advanced training and work experience in the profession of a painter of the 2nd category - at least 1 year.
1.3. Knows and applies:
- the principle of operation and methods of adjustment of mechanisms and devices that are used during painting work;
- the structure of electrostatic field installations and electrostatic paint sprayers, the rules for their regulation according to the indications of instrumentation;
- rules for the protection of sheet material and shaped steel for ship structures;
- methods of painting and varnishing products from various materials and the process of preparing products for processing;
- the process of painting surfaces under a simple pattern of various types of wood, marble and stone;
- properties of decorative and insulating varnishes and enamels, recipes for their manufacture;
- methods of preparing paints of different colors;
- the chemical composition of paints and the rules for selecting colors;
- specifications for the processing and drying of products.
1.4. A painter of the 3rd category is appointed to the position and dismissed from the position by order of the organization (enterprise / institution).
1.5. The painter of the 3rd category reports directly to _ _ _ _ _ _ _ _ _ _ .
1.6. The painter of the 3rd category directs the work _ _ _ _ _ _ _ _ _ _ .
1.7. The painter of the 3rd category during the absence is replaced by a person appointed in the prescribed manner, who acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.
2. Description of work, tasks and job responsibilities
2.1. It paints surfaces that require high-quality processing, after applying putties and primers with paints and varnishes in several tones, performs grinding, priming, oiling and polishing them with various tools.
2.2. Carries out painting of surfaces under simple drawing of various breeds of a tree, a marble and a stone.
2.3. Apply drawings and inscriptions on stencils in two to three tones; numbers and letters without stencils.
2.4. Paints parts and surfaces with electrostatic machines and electrostatic paint sprayers.
2.5. Treats surfaces by spraying.
2.6. Treats surfaces with corrosion inhibitors.
2.7. Regulates the supply of air and paint to the spray guns.
2.8. Covers products with bitumen-based varnishes and nitro-varnishes.
2.9. Cleans closed volumes (cylinders, compartments).
2.10. Paints and cleans (scrapes) ships at the docks.
2.11. Performs interoperational protection with phosphate primers of sheet material and shaped rolled products for ship structures, except for tanks of drinking distilled and industrial water, medical and industrial fat.
2.12. Applies paint and varnish coatings to the locations of the variable waterline of ships, the processing of which is not subject to high requirements.
2.13. Produces simple stencils.
2.14. Prepares mixtures of oil paints and varnishes, nitro-paints, nitro-varnishes and synthetic enamels.
2.15. Selects the color according to the given samples.
2.16. Sets up mechanisms and devices that are used during painting work.
2.17. Knows, understands and applies the current regulatory documents relating to its activities.
2.18. Knows and fulfills the requirements of regulatory acts on labor and environmental protection, complies with the norms, methods and techniques for the safe performance of work.
3. Rights
3.1. A Grade 3 Painter has the authority to take action to prevent and remedy any irregularities or nonconformities.
3.2. A painter of the 3rd category has the right to receive all social guarantees provided for by law.
3.3. A painter of the 3rd category has the right to demand assistance in the performance of his duties and the exercise of rights.
3.4. A painter of the 3rd category has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision of the necessary equipment and inventory.
3.5. The painter of the 3rd category has the right to get acquainted with the draft documents relating to his activities.
3.6. The painter of the 3rd category has the right to request and receive documents, materials and information necessary for the performance of his duties and orders of the management.
3.7. The painter of the 3rd category has the right to improve his professional qualifications.
3.8. The painter of the 3rd category has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.
3.9. The painter of the 3rd category has the right to get acquainted with the documents defining the rights and obligations for the position held, the criteria for assessing the quality of the performance of official duties.
4. Responsibility
4.1. The painter of the 3rd category is responsible for non-fulfillment or untimely fulfillment of the duties assigned by this job description and (or) non-use of the rights granted.
4.2. The painter of the 3rd category is responsible for non-compliance with the rules of internal labor regulations, labor protection, safety, industrial sanitation and fire protection.
4.3. The painter of the 3rd category is responsible for the disclosure of information about the organization (enterprise / institution) that is a trade secret.
4.4. The painter of the 3rd category is responsible for non-fulfillment or improper fulfillment of the requirements of the internal regulatory documents of the organization (enterprise / institution) and the legal orders of the management.
4.5. The painter of the 3rd category is responsible for offenses committed in the course of his activity, within the limits established by the current administrative, criminal and civil legislation.
4.6. The painter of the 3rd category is responsible for causing material damage to the organization (enterprise / institution) within the limits established by the current administrative, criminal and civil legislation.
4.7. The painter of the 3rd category is responsible for the misuse of the granted official powers, as well as their use for personal purposes.
5. Examples of work
5.1. Trucks - final painting.
5.2. Passenger cars and buses - applying a primer layer, puttying, polishing, primary and secondary body painting.
5.3. Barges - painting.
5.4. Cast and welded parts for electric machines and devices - grinding after puttying and painting.
5.5. Electric motors, electric machines, turbogenerators - final painting.
5.6. Tanks - varnishing of the inner surface.
5.7. Welded cassettes for large-block stations and control panels - painting.
5.8. Movie cassettes - and cameras - painting.
5.9. Vessel hull inside and outside - painting.
5.10. Cases, tables and discs of control and test benches - polished and painted with enamel.
5.11. Cranes, bridges, power line supports - painting.
5.12. Bodies of freight cars, boilers of tanks and locomotives, universal containers - painting.
5.13. Counting, sewing and typewriters - painting and polishing.
5.14. Anchor chains - painting.
5.15. Machines, machine tools, devices, devices and other equipment - painting.
5.16. Decks - applying mastics.
5.17. Metal and wooden panels for radio devices - painting and processing.
5.18. Frames, doors, transoms - painting and varnishing.
5.19. Ceilings - cleaning, smoothing, etching.
5.20. Walls, floors and other surfaces - simple painting.
5.21. Walls, shelves, interior and exterior furniture, ceilings and roofs of locomotives and all-metal wagons, machine-cooled wagons and isometric wagons with a metal body - sanding, applying a revealing layer with a brush, spray or roller.
5.22. Poles, shields - painting under a simple pattern of various types of wood.
5.23. Reinforced concrete ships - painting.
5.24. Trolleybuses and subway cars - sanding on solid putty, applying the second and third layers of enamel with a brush and paint sprayer.
5.25. Ventilation pipes - painting.
5.26. Pipes and metal fittings of locomotives and wagons - painting.
5.27. Electrical equipment cases - varnishing and polishing.
JOB DESCRIPTION
painter (3rd category)
1. GENERAL PROVISIONS
1.1. This job description defines the functional duties, rights and responsibilities of a painter of the 3rd category "_____________" (hereinafter referred to as the "Organization").
1.2. The painter is appointed to the position and dismissed from the position in accordance with the procedure established by the current labor legislation by order of the head of the Organization.
1.3. The painter reports directly to the ________________ Organization.
1.4. A person who has a specialized secondary education and ___ years of work experience in the specialty is appointed to the position of a painter.
1.5. The painter must know:
The principle of operation and methods of adjustment of mechanisms and devices used in painting work;
The device of electrostatic installations of the field and electrostatic paint sprayers, the rules for their regulation according to the indications of instrumentation;
Rules for the protection of sheet material and profiled products for ship structures;
Methods for painting and varnishing products from various materials and the process of preparing products for finishing;
The process of cutting surfaces for a simple pattern of various types of wood, marble and stone;
Properties of decorative and insulating varnishes and enamels and recipes for their composition;
Methods for composing paints of various colors and tones;
The chemical composition of paints and the rules for selecting colors;
Methods and means of gluing, changing linoleum, linkrust and other materials;
Specifications for finishing and drying products.
1.6. During the temporary absence of the painter, his duties are assigned to _________________.
2. FUNCTIONAL RESPONSIBILITIES
The painter performs the following types of work:
Painting surfaces requiring a high-quality finish after applying putties and primers with paints and varnishes in several tones, sanding and polishing them.
Cutting surfaces for a simple pattern of various types of wood, marble and stone.
Application of drawings and inscriptions on stencils in two to three tones; numbers and letters without stencils.
Painting parts and surfaces on electrostatic installations and electrostatic paint sprayers.
Spray surface finishing.
Surface treatment with corrosion inhibitors.
Regulation of air and paint supply to sprayers.
Coating of products with bitumen-based varnishes and nitro-varnishes.
Manual cleaning of closed volumes (cylinders, compartments).
Painting and cleaning (sanding) of ships at the docks.
Interoperational protection with phosphating primers of sheet material and shaped rolled products for ship structures, except for tanks of drinking, distilled and feed water, medical and industrial fat.
Application of paint and varnish coatings at the location of the variable waterline of ships, the finishing of which is not subject to high requirements.
Making simple stencils.
Cooking adhesives according to a given recipe.
Compilation of mixtures of oil paints and varnishes, nitro-paints, nitro-varnishes and synthetic enamels.
Selection of color according to given samples.
Change and sticking of linoleum, relin and other materials.
Adjustment of mechanisms and devices used in the production of painting works.
Example types of work:
Passenger cars, except for the ZIL and Chaika brands, and buses - applying a primer layer, puttying, sanding, primary and re-painting of the body.
Trucks - final painting.
Fittings and ship equipment - painting according to the 2nd class of finishing.
Barges - coloring.
Control units - priming and puttying of external surfaces.
Block sections, complex foundations, sides inside - mechanized rust removal.
Doors, frames - puttying.
Vane propellers - priming and painting.
Cast and welded parts for electric machines and devices - sanding after puttying and painting.
Capacities - covering with a varnish of an internal surface.
Contactors ZS-T - coloring of the outer surface.
Movie and camera cassettes - coloring.
Welded frames of large-block stations and control panels - painting.
Upper and lower propeller housings - priming and painting of external and internal surfaces.
Cases and covers of reducers steel - priming and painting of internal surfaces.
Cases, tables and discs of adjustment and test stands - grinding and enameling.
Vessel hull inside and outside, superstructures - painting.
Turbine housings - priming, puttying and painting of external and internal surfaces.
Cases of electrical distribution devices - puttying, priming, painting.
Cranes, bridges, power transmission towers - painting.
Bodies of freight cars, boilers of tanks and steam locomotives, universal containers - painting.
Oil pipelines steel - coloring of internal surfaces.
Machines, machine tools, devices, devices and other equipment - painting.
Ship mechanisms, devices - puttying, painting by hand and mechanized way.
Supports are flexible, steel - priming and puttying of external surfaces.
Decks - applying mastics.
Metal and wooden panels for radio devices - painting and finishing.
Switches "C" PS-1 steel - priming of the outer surface and painting.
Tiles facing and shaped - facing of vertical surfaces.
Surfaces of ships, wagons - gluing linoleum, linkrust, relin.
Surfaces of ship premises, panels, layouts - sanding on putty and primer, painting with enamels and varnishes.
Surfaces of structures and products - painting with installations of the URTs-1 type.
Surfaces of structures - applying Adem mastic manually.
Ship surfaces of metal, wood, for insulation in enclosed spaces, the ship's hull from the outside with rubber and fiberglass, complex foundations, shafts, rudders - manual and mechanical painting.
Coating "LAK" - gluing and removing stencils.
Frames, doors, transoms - painting and varnishing.
Welded steel rotors - priming and painting of internal surfaces.
Glasses, bushings, seals, small-sized brackets, housings, casings, frames - continuous puttying, grinding, painting according to the 2nd and 3rd class of finish.
Counting, sewing and typewriters - dyeing and polishing.
Pillars, shields - cutting under a simple drawing of various types of wood.
Walls, shelves, interior and exterior furniture, ceilings and roofs of locomotives and all-metal wagons, machine-cooled wagons and insulated wagons with a metal body - sanding, applying a revealing layer with a brush, spray or roller.
Reinforced concrete vessels - painting.
Trolleybuses and subway cars - gluing panels and ceilings, interior with cotton fabric, gluing panels with linkrust, sanding on solid putty, applying the second and third layers of enamel with a brush and paint sprayer.
Pipes and metal fittings of locomotives and wagons - painting.
Ventilation pipes - painting.
Cargo holds - staining on fiberglass with EP enamels.
Steel rods - priming and painting of external surfaces.
CPC with devices - priming and painting the outer surface.
Electrical equipment cases - varnishing and polishing.
Anchor chains - coloring.
Tanks, compartments, closed volumes - manual cleaning of rust and loose scale, priming and painting.
Metal scales - knurling with a roller, pouring engraving in several colors.
Electric motors, turbogenerators - final painting.
Drawers and cabinets, metal panels of stations and control panels - sanding, painting and finishing.
3. RIGHTS
The painter has the right:
3.1. Request and receive the necessary materials and documents related to the activities of the painter.
3.2. Enter into relationships with departments of third-party institutions and organizations to resolve operational issues of production activities that are within the competence of the painter.
3.3. Represent the interests of the enterprise in third-party organizations on issues related to its professional activities.
4. RESPONSIBILITY
The painter is responsible for:
4.1. Failure to fulfill their functional duties.
4.2. Inaccurate information about the status of the work.
4.3. Failure to comply with orders, orders and instructions of the head of the Organization.
4.4. Failure to take measures to suppress the identified violations of safety regulations, fire and other rules that pose a threat to the activities of the enterprise and its employees.
4.5. Failure to ensure compliance with labor and performance discipline.
5. WORKING CONDITIONS
5.1. The work schedule of a painter is determined in accordance with the Internal Labor Regulations established by the Organization.
5.2. In connection with the production need, the painter is obliged to go on business trips (including local ones).
6. RIGHT OF SIGNATURE
6.1. To ensure his activities, a painter is given the right to sign organizational and administrative documents on issues that are part of his functional duties.
Read the instruction ______________ / ______________ (signature)
Characteristics of works. Painting of metal surfaces requiring a high-quality finish, after applying putties and primers with paints and varnishes in several tones. Grinding, priming, oiling and polishing them with hand tools. Application of polymer powder compositions on medium-complexity configuration parts (round, spherical, oval, surfaces with bulges, bends, etc.). Cutting surfaces for a simple pattern of various types of wood, marble and stone. Drawing drawings and inscriptions on stencils in two or three tones; numbers and letters - without stencils. Painting parts and surfaces on electrostatic installations and electrostatic paint sprayers. Preparation and grinding of putty compositions. Puttying the surface of building structures manually, leveling the putty composition applied mechanically. Priming, sanding primed and puttied surfaces. Preparing the surface for pasting. Cooking adhesives according to a given recipe. Wall papering. Surface finishing by spraying and treatment with corrosion inhibitors. Regulation of air and paint supply to sprayers. Surface coating with bitumen-based varnishes and nitro-varnishes. Cleaning of closed volumes (cylinders, compartments). Painting and cleaning (scraping) of ships at the docks. Interoperational protection with phosphating primers of sheet material and shaped rolled products for ship structures, except for tanks of drinking, distilled and feed water, medical and industrial fat. Application of paint and varnish coatings at the location of the variable waterline of ships, the finishing of which is not subject to high requirements. Making simple stencils. Compilation of mixtures of oil paints and varnishes, nitro-paints, nitro-varnishes and synthetic enamels. Selection of color according to given samples. Adjustment of mechanisms and devices used in the production of painting works.
Must know: the principle of operation and methods of adjustment of mechanisms and devices used in painting work; the arrangement of electrostatic installations of the field and paint sprayers, the rules for their regulation according to the indications of instrumentation; ways to protect sheet material and profiled products for ship structures; properties of materials and compositions used in the preparation of the surface of building structures; glue cooking methods; methods of painting and varnishing products from various materials and the process of preparing products for finishing; the process of cutting surfaces for a simple pattern of various types of wood, marble and stone; properties of decorative and insulating varnishes and enamels and recipes for their composition; methods of composing paints of various colors and tones; the chemical composition of paints and the rules for selecting colors; specifications for finishing and drying products.
