Computer complex armchair table ideas with your own hands. Do-it-yourself computer desk: drawings, assembly diagrams, recommendations from professionals. How to make a rectangular table

The computer has firmly established itself in the life of modern man. It breaks news, provides relevant information, connects with business partners, entertains, educates, provides and gets the job done. A vast group of people has emerged who spend most of their time at the computer. Actively involved are remote workers who do not need a physical presence in the office, who have every opportunity to do their work without leaving their homes. For them, the workplace is a computer desk. The importance of a properly organized and equipped workplace is undeniable, but not everyone has the opportunity to create it. The reason lies in the lack of a suitable table that allows you to place all the accessories necessary for work in a convenient order. Often, users are not satisfied with the size or configuration that does not fit into the interior of the room. Long searches take a lot of time and effort, not guaranteeing a positive result. People who know how to handle tools and materials, in such cases, begin to think about how to make a computer desk with their own hands, to create the best option for themselves. The procedure is not the most difficult, but some knowledge and skills will be required to implement it. Let's consider the question in order.

What is a computer desk

A computer is a complex of several elements, each of which must be placed in a certain order or in its place. We need our own platforms for the system unit, monitor, work plane for the keyboard and mouse.

There are more compact types of computers - a laptop, a monoblock - but they also need a work plane.

A computer desk is a combination of a desk, desktop with additional elements, the number and composition of which may be different. Depending on the needs and possibilities of the premises, small planes with two or three additional platforms can be used, or large sets that combine racks for working materials, hanging shelves and other useful and user-friendly elements. Drawers and closed cabinets are also usually present, which combines computer desks with writing desks. The configuration of the computer desk is aimed at providing maximum ease of use, the ability to have access to any point in the workspace without unnecessary movements or movements that distract from classes.

What are the requirements for the design of a computer desk

A computer desk should provide convenience and comfort for the user. Design requirements:

• The most convenient configuration that provides the placement of a computer and peripherals and the ability to use it for its intended purpose without any preparation.
• The dimensions of the table should be user-friendly and optimally fit into the interior of the room.
• The overall design should also match the decor of the room, not stand out and not create unpleasant sensations.
• The composition of the elements that make up the table is designed for the most successful performance of work, classes or other actions with the computer.

The listed requirements are general, relating to all types and structural types of tables. For people of various professions, carrying out activities of one kind or another, some additional elements or functions may be required. For example, special planes may be required for the installation of instruments, equipment, placement of diagrams, drawings, etc.

Therefore, when planning the independent manufacture of a computer desk, you should carefully consider its configuration and composition of work surfaces, the number of containers and shelves, drawers and planes. To provide your own requirements means to create the most suitable table for yourself, which cannot be found in finished form.

Types of computer tables

There are many types of computer tables:

• Classic (straight).
• Corner.
• Baby.
• Mobile (on wheels).
• With shelving.
• With open shelves.
• With closed drawers and cabinets.

In addition, there are different types of table designs:

• Modular. The elements of the same type are used, allowing them to be assembled in an arbitrary order and to obtain various design options.
• Prefabricated. A design that allows, if necessary, disassembly and subsequent assembly (for example, for moving, during repairs, etc.).
• Embedded. Such tables are parts of large furniture or structural arrays, performing their functions in their composition.

There are a lot of options, moreover, they can combine the features of two or three of these groups. There are no restrictions other than personal preferences and opportunities. People with developed artistic or creative abilities create exclusive, unique samples of tables made on the basis of various mechanisms, devices, objects.

Many people use non-standard methods of painting or pasting surfaces, use different design options, etc. Such specimens are created for an amateur, but many of them are very attractive in appearance and are able to decorate a room.

What are computer tables made of?

The most commonly used material for a computer desk is laminated chipboard. This material is most convenient for the manufacture of hull structures; it is not for nothing that it is called “furniture in rolls”. Chipboard is easy to process, for connecting or fastening various elements, all the necessary spare parts and accessories are sold. In addition, there is a huge selection of color options, allowing you to choose the option that best suits the rest of the interior of the room or the wishes of the user.

Alternatively, you can use laminated MDF. It is close in its properties to laminated chipboard, but has a smaller filler fraction, due to which it is less fragile and not so prone to delamination when screwing fasteners. The principles of processing and assembly of these materials are almost the same.

Some craftsmen prefer stiffer, more durable designs. They use metal parts that can withstand significant loads. At the same time, only the frame of the table is most often made of metal, work surfaces are made of sheet materials (chipboard, LMDF, countertop for kitchen sets, plywood, etc.).

In order to make a computer table with your own hands from metal, you need to have some skill in working with the material, the appropriate tools. As a frame, steel pipes of round or rectangular cross-section, chrome-plated or raw (needing painting) are used.

The most time-consuming option is a do-it-yourself computer desk made of wood. Working with wood is easier than with metal, but creating a finished product requires a large number of tools, materials, and consumables.

You will need cutting, grinding, planing and finishing work and other intermediate operations. You can perform these operations at home, but for family members, such actions can be quite a serious test. In addition, finishing work involves the use of paints and varnishes that emit a considerable amount of volatile components with a pungent odor that are harmful to health. A computer desk made of solid wood will be quite expensive, since you will need to purchase a lot of expensive materials, tools, and consumables. If all the work is done at the proper level, then the result more than justifies all the efforts made, the money spent.

Things to Consider When Designing a Computer Desk

Before starting work, you should create a working drawing, a table project. This is necessary in order to fully imagine the assembly order, calculate the amount of materials, accessories, and finally work out the design and configuration of the table. It is necessary to start the development of the project with general parameters - decide on the style, decide what size or shape of the table will suit the existing interior or room size, choose the optimal color, material, and other characteristics. Then you need to resolve the issue with the countertop - size, shape, material, one or more. This point is important because the countertop is not always made of the same material as the walls of the cabinets and other vertical planes. When planning to make a computer desk with your own hands, drawings, photos, diagrams, other information is easy to find on the Internet. To get acquainted with the existing options, samples is useful for implementing your own ideas.

Important! In the absence of experience or skills, you can use one of the design programs, such as Basis Furniture Maker or the like. The programs are simple, they guarantee against errors in the calculation of dimensions or fittings, determine marking points, and other important nodes. At the end of the work, the finished drawing can be printed, you can get it in paper form.

What tools and materials might come in handy

The set of tools is determined by the material that is selected to create the table. At the same time, there is a certain mandatory list that is needed in any case:

• Roulette, ruler, square.
• Pliers, hammer, awl, screwdriver (under a straight or cross-shaped slot).
• Electric drill, jigsaw, grinder.

To make a table from chipboard or LMDF you will need:

• Iron (for gluing edging material).
• Forstner drill with a diameter of 35 mm for door hinges.
• Screwdriver with a set of bits.

For the metal frame of the table, you must use:

• Bulgarian with a cutting disc.
• Electric drill with a set of drills.
• File, sandpaper for processing edges.

You will also need materials:

• Fittings for assembling the body and hinged doors.
• Slider kits for drawers or keyboard surfaces.
• Edge material.
• Legs, support elements.
• Handles for doors, drawers.

In addition to the most necessary materials, others may come in handy, not so important, but able to revive the product, give it an elegant, winning appearance. There are many options for how to decorate a computer desk with your own hands, in the absence of interesting ideas, you should look for photos on the net. There are a great many examples worthy of imitation, something suitable will definitely be found.

How to assemble a computer desk

Assembly is carried out according to the working drawing. According to its specification, components are manufactured in the required quantity, processed in the necessary way, after which the table is assembled and installed in the allotted place. This is the general scheme for the manufacture of a computer desk. More specifically, table assembly can only be considered in relation to a particular material.

Making a table from chipboard or LMDF

Chipboard has sufficient strength and rigidity, so a table frame is not needed. For manufacturing you will need:

• Cut the component parts, guided by the specification of the assembly drawing.
• Glue the edges of the parts with edging material. A thin edge with a pre-applied adhesive layer or a thick vinyl edge is used, worn on the edge of the canvas.
• Drill at all the necessary points for the possibility of assembly, installation of fittings and door hinges. This item is the most responsible, requires accuracy, accuracy. It is recommended that you take the time to make a template in advance that ensures the accuracy of installing elements and drilling holes.
• Assemble a computer desk. Various assembly methods are used, with the use of confirmation, eccentric ties, screws, corners, etc.
• Install drawer slides or keyboard pads.
• Install handles, plugs, additional elements.
• Drill holes for wires (if necessary).
• Set the table in place, start using.

Making a metal table

Completely metal tables are usually not made, only a metal frame is used. Alternatively, a base is created from metal legs and rectangular metal tubes. Work surfaces are most often made of laminated chipboard; recently, countertops from kitchen sets have become popular.

Assembly is done in two stages:

• Cutting and assembling a metal frame.
• Facing with horizontal surfaces (walls), installation of work surfaces.

The first stage can be done in an apartment, or in a workshop. If welding works are used, then they should be carried out in a specially prepared room or in the open air. In the absence of a welding machine, bolted connections can be used, but this option is less accurate, does not provide sufficient compactness of the connections. Depending on the project, either a table frame or a complete table frame, shelving is assembled. If a chrome-plated tube is used, then welding is not used, assembly is carried out only on bolted joints or on special corner connecting elements.

The finished frame is installed in place, work surfaces, shelves, walls, and other cladding elements are attached to it. Typically, designs of this kind do not have a large number of closed cabinets, drawers, and other additional elements. It is an openwork, light-looking design, free from unnecessary planes, that is used. This type of table looks good in a Hi Tech style interior.

Assembling a wooden table

Working with wood requires a large number of machines and equipment. The processing of wooden parts is noisy, very dusty, so it is recommended that only final assembly or finishing be done at home. All major operations are best performed in a specialized workshop, so you can achieve the best results.

It is quite difficult to make a completely wooden computer desk. It will take a lot of machine operations, tenon-groove joints, gluing and other actions that require the use of machines.

Most often, combined tables are made when a wooden table top and external planes are created, and the frame and other load-bearing elements are made of rectangular metal tubes. In this version, the table outwardly looks like it is completely assembled from solid wood, but from the point of view of construction it is a metal frame sheathed with wooden shields. The assembly of such a product is no different from the already considered assembly of a metal frame, so there is no point in dwelling on it separately.

Finishing of wood is made by means of wood stains and varnishes. Given the specifics of the product, it is recommended to use matte varnishes that are not afraid of small scratches or scuffs that stand out on a glossy surface. In addition, matte varnish can be simply applied by spraying, while glossy coatings have to be sanded, polished, which takes time and skills. The varnish must be durable, resistant to mechanical stress. It is recommended to use a two-component parquet varnish, a polyurethane one-component varnish also showed itself well.

Self-manufacturing of a computer desk is made if necessary to obtain a certain shape, size or configuration. It is irrational to take on the creation of conventional models, since it is easier to buy a ready-made sample without wasting time. Manufacturing does not require special training, it is enough to have basic skills. The main key to success is accuracy, thoroughness in detail, thoughtfulness of each step. Significant help in creating a project, in technical matters, can be obtained on the Internet, where there are a lot of images or drawings of finished products that are useful for understanding your own project.

A computer desk should combine many functions: in addition to being convenient for working at a computer, it should also serve as a desk and it is desirable that it provide storage space for disks, folders, notebooks, and other office supplies. The main thing is that, in addition to functionality, it should fit well in shape and size with the interior. Alas, it is often impossible to find completely suitable furniture in stores, for this reason we will consider how to assemble the perfect table with our own hands.

A computer desk should combine many functions.

Here are a few reasons to make your own computer desk.

1. The size of the product can be selected based on the size of the room. Factory tables tend to be expensive and standardized, but you can design your own to the size you need.
2. You choose the details yourself. A furniture factory can save on assembly parts (we've all encountered flimsy screws in new furniture), but you can buy high-quality and durable ones yourself, and assemble a solid table.
3. The cost of factory furniture includes many factors: not only the cost of materials, but also the wages of workers, the cost of maintaining the premises and other payments for the production process. When buying in a store, the price will include the rent of the store and the salary of sellers, not to mention a large margin. If you make the table yourself, you only pay for the materials.
4. You choose the design of the table, based on the functions you need when using it. Often, to save space in a room, you need to optimize the place as much as possible, this can be done by creating a table project with a large number of shelves, including doors.

Alas, it is often impossible to find completely suitable furniture in stores, for this reason we will consider how to assemble the perfect table with our own hands.

After complete drying, you can start assembling according to the layout.

Deciding on design and construction

First of all, the harmony of design with the furniture in the room is important. You can pick up options on the Internet, but you need to take into account the size of the space allotted to the table. The design must be selected based directly on the functionality of the table. If you need a computer desk for a stationary PC, then for the system unit you will need a special niche, a keyboard shelf and space for a monitor. If the table is designed to work with a laptop, instead of niches, you can make additional shelves where things will be stored.

Often, to save space in a room, you need to optimize the place as much as possible, this can be done by creating a table project with a large number of shelves, including doors.

It is important to understand that the main goal is to create a comfortable workplace, therefore it is preferable to immediately outline the approximate dimensions of all components, based on this parameter. It should be easy for you to reach the right things on the shelves, while the bottom of the table should withstand maximum loads.

First of all, the harmony of design with the furniture in the room is important.

Drawings and detailing

How to make a computer desk with your own hands? After an approximate definition of the basic requirements for the table, you need to outline a sketch. It does not have to be highly artistic, but must reflect a full-fledged appearance and contain all the structural details. After that, you need to measure the space for the table, mark the necessary ones on the sketch: the height, the length of the table along the wall, the width of the table inside the room. After that, you can start creating drawings. Again, these can be just sketches, but with measurements indicated. It is necessary to choose the height of the countertop, draw all the details in the correct scale. Be sure to check that you have worked out all the details and have not forgotten anything, as this should be a ready-made layout on which further work will be built.

After preparing the drawings, it is necessary to calculate the required material.

On a note: in a computer desk, an important feature is the ability to hide extra wires. For this, a special niche is provided, to which holes in the table lead, usually round.

Mounting materials are best taken with a small margin

After preparing the drawings, it is necessary to calculate the required material: the number of square meters of the base material, the number of handles and fasteners.

When assembling the table with your own hands, you can use any material you like.

On a note: fasteners are best taken with a small margin. It will be problematic if there are not enough of them during assembly.

Of the cheaper materials, laminated sheets of chipboard, MDF, and plastic are usually used.

Necessary materials

When assembling the table with your own hands, you can use any material you like. It depends on your preferences and financial possibilities. If you can afford a more expensive material, then choose natural wood: it is the most durable and non-toxic. Of the cheaper materials, laminated sheets of chipboard, MDF, and plastic are usually used. With special requirements for the appearance of the table, you can choose glass and metal.

With special requirements for the appearance of the table, you can choose glass and metal.

On a note: although glass and metal look very beautiful and are used in the high-tech style that is now fashionable, it is extremely difficult to work with these materials. This requires special skills, since glass is a very fragile material, and metal is difficult to cut.

Wood and materials from its shavings are softer and more pliable, beginners should stop at them.

If you are using material that needs to be painted, it is best to purchase paint supplies from a hardware store right away.

In order for a computer desk to be as strong as possible, it must have strong fasteners. For this, thick screws and self-tapping screws are suitable. When buying, you should consult with the seller: he can suggest the right choice, based on the approximate weight of the entire structure.

To mark the parts of the table, you will need chalk or a marker.

On a note: if you are using material that needs to be painted, it is best to buy paint and varnish materials at a hardware store right away.

It is necessary to choose the height of the countertop, draw all the details in the correct scale.

Required Tools

How to make a computer desk if there are no tools? You can buy them or borrow them from friends. For the manufacture of the structure, you will need the following tools.

1. An electric saw for cutting parts of a table from a common piece of material. You can also use a hand saw.
2. Sander and sandpaper of various sizes of crumbs. After cutting out the parts, it will be necessary to sand them properly so that the surface is perfectly smooth.
3. Drill or other tool for drilling technically important holes.

Be sure to check that you have worked out all the details and have not forgotten anything, as this should be a ready-made layout on which further work will be built.

What else do you need to assemble the table

1. Screwdriver. It is impractical to use nails and a hammer, screws are stronger and hold the structure longer.
2. Construction ruler with levels. It will be required at the moment when the assembly of the table begins parallel to the floor, in order to avoid sliding and falling objects from the surface. The ruler will help make the table as even as possible.

After the outer side has dried, sign the details on a new one and paint the inner side.

On a note: you will need chalk or a marker to mark the parts of the table. They will also be needed during assembly. Ideally, use washable markers.

After that, you need to measure the space for the table, mark the necessary ones on the sketch: the height, the length of the table along the wall, the width of the table inside the room.

After that, it is necessary to cut out all the details as accurately as possible, fold them side by side and grind them one by one to a smooth state.

Manufacturing process: step by step instructions

The first stage of production is the creation of a layout. If you have already prepared a layout, made calculations and bought all the necessary materials, prepared tools, you can start manufacturing.

After an approximate definition of the basic requirements for the table, you need to outline a sketch.

First you need to mark out the details on the surface of the selected material according to the calculated layout on a scale of 1: 1 so that all parts of the table fit.

It is important to understand that the main goal is to create a comfortable workplace, therefore it is preferable to immediately outline the approximate dimensions of all components, based on this parameter.

On a note: it is better to sign the parts on the inside so that you do not get confused in them during assembly.

The first stage of production is the creation of a layout.

After that, it is necessary to cut out all the details as accurately as possible, fold them side by side and grind them one by one to a smooth state. If the material requires painting, after grinding, paint all the details separately on the outside, but leave the inside. After the outer side has dried, sign the details on a new one and paint the inner side.

If you have already prepared a layout, made calculations and bought all the necessary materials, prepared tools, you can start manufacturing.

After complete drying, you can start assembling according to the layout. Do-it-yourself corner computer desk according to individual design is ready!

If the table is designed to work with a laptop, instead of niches, you can make additional shelves where things will be stored.

A computer desk with your own hands according to an individual design is ready.

VIDEO: Do-it-yourself computer desk. How to make a table yourself. Table made of wooden boards.

Let's figure out how to make a computer desk with your own hands. It is worth recognizing that working at the table always brings more productivity than on the couch. If you put the computer on the table, you will feel concentrated. A handmade computer desk will significantly improve the overall interior of the room. So let's look at everything in detail - how to make a computer desk?

Having a computer is now considered a necessity. Many adults keep important documentation on a personal computer, and for children this machine is simply important for schooling. Recently, the technological process has climbed high. Buying a computer is considered commonplace. As you know, there are stationary and portable devices. And each of them requires a proper place.

Tables are different. Big ones, small ones, empty ones, stuffed with different shelf compartments. A successful choice will depend on how determined your goals are. For example, do you plan to use a laptop, a desktop computer with all its accessories? What will you do in the workplace (writing articles, programming, bookkeeping, modeling, video editing, etc.). There can be a lot of tasks. And based on your list of needs, you should make a deliberate choice of a computer desk. Let's say the choice falls on a desktop computer. Its components include a system unit, monitor, keyboard, mouse, speakers, modem, printer and various other additional devices. Based on this, calculate the required number of shelves. Another important point is the materials for the manufacture of a computer desk. The most common inexpensive working material is chipboard. Of course, there are also expensive options.

Choose a place

The convenience in the room will depend on the correct location of the table. If the room is small, of course, it would be unreasonable to put a large table here. If the room allows you to accommodate large furniture, a small computer desk will not seem like the most functional furniture option. It is worth focusing on the following aspects before placing furniture in a room:

• The computer desk serves as a carrier of computer equipment, which, of course, needs power supply. So the table is important to place next to the outlet.
• It is desirable to work at the table during consecration. There is no better light for work than daylight. Therefore, it is worth organizing the arrangement of the table in such a way that the light from the windows falls on the left side of the computer area.
• Computer equipment on the table already obliges you to get rid of excess heating objects in advance that can cause a short circuit, a fire. Putting a table near a radiator, fireplace, electric heater is extremely unreasonable.
• It is recommended to free the occupied space from various other items (pictures, shelves and decorative elements).

Tables are divided into several types: straight, corner and combined. Let's analyze each option in order.

Each type of table is made differently. Some projects cost a lot, while others save money. The type of table you choose will determine your costs, assembly time, and available space.

straight table

The classic version of the furniture is intended mainly for simple written work. The advantage of this type is a good concentration on work and the ability to feel free. In this way, your attention is not lost in vain, and productivity at work increases significantly. The stubborn table has its own requirements. If you have enough free space along the wall, then you will be comfortable working in your room.

Corner table

People who constantly work from home often have to sit in front of a computer screen. If you belong to this category of workers, then a corner table is very suitable for you. Its advantages are that it requires little assembly materials and does not take up much space. This type of table is chosen by gamers.

The corner table also has the other side of the coin. According to psychologists, the angular design specifically puts pressure on the human psyche and provokes panic.

Combination table

This option is something in between the choice between the first and second option. The design is functional and beautiful in design. But it takes up quite a lot of space. This is mainly due to the presence of various storage departments. The main role is played by cabinets, which allow you to hide things in such a way that they are always at hand and at the same time do not interfere.

drawing work

Once you have dealt with all the small points, proceed to assembling a computer desk with your own hands. First you need to determine the height of the structure. The standard figure is 75 cm. Not everyone has the same height. Therefore, it is worth correctly calculating the height using one formula:

We multiply “your height” by 75 and divide by 175. Your height is 190 cm. So the calculations will be as follows. 190×75/175=81 cm.

The above formula allows you to accurately make a drawing. If you want the table to turn out to be even, and it didn’t take so much time to make it, pay special attention to the drawing work. In order not to invent "bicycles", borrow a standard plan for manufacturing a computer desk design. Too many materials are unnecessary for this model. The design has the following components:

• Monitor shelf;
• Keyboard shelf;
• Shelf of various small things;
• Cabinet of files and other documentation;
• Upper shelves for books, columns.

As you can see, computer components can easily fit on the table. What tools to use to assemble a computer desk? For such a case, you can not do without a jigsaw (preferably electric), a drill, a screwdriver, a screwdriver, a grinder and a chisel. And since you will be doing the work according to the drawing, do not forget about the construction pencil.

Getting Started

For the manufacture will need sheets of chipboard. Of course, you can cut them yourself. True, if you do not have experience in this, the sheets may turn out uneven. And this means that you have to redo the work and once again waste time. An alternative solution would be to order such sheets from a furniture factory. There you can stick the edge, which will save time. Next, the necessary parts for assembly will be listed: side racks; central; countertop; rear machine panel; sheets for shelves; separate sheet for the keyboard. As soon as these details are cut out for you and you have not noticed any errors, feel free to get to work.

The principle of operation consists of several stages:

• The side and center wall needs holes for the lower shelves. Before drilling, mark with a pencil at the bottom up to 70 mm. Then draw a horizontal line. Now, when the two holes correspond to two parallel ones, you should take the shelf fasteners with the help of confirmations, self-tapping screws.
• We attach the top shelf in the same way. True, this time the distance is 100 mm. We measure, mark and make holes. Next, attach the top shelf.
• The rear wall must be in a level position with the end of the side and center wall. We apply the marks we need, drill and fasten the wooden wall.
• In the future, the back wall is connected to the side. Before connecting the two parts of the table, drill two holes in the back wooden sheet. Screw the two parts to each other with the help of confirmations.
• The keyboard shelf should slide in and out. So we need "rails" that will be fixed on the main top of the table. So, before that, we measure 50 mm from the side wall. Then we leave a mark, and then draw two parallel lines. If the lines are even, we begin to fix the "rails".
• The keyboard shelf will not be able to move along the rails so easily if the rails are not fixed to it. Having coped with this stage of work, we proceed to the next one.
• To install the tabletop, you need to drill two holes in the side parts of the table. This is necessary in order to place a dowel in each of them. In the countertop, you will need to make four holes that would correspond to the inserted dowels. It is desirable to make the holes in the countertop deep, but at the same time not through.
• You can’t just take and immediately insert the countertop onto bare dowels. The structure will not be stable. Nevertheless, this is achieved with PVA glue. Spread each dowel individually with glue, and then insert the countertop.

Fasten additional shelves on top using dowels.

Is a computer desk suitable for a laptop

Strictly speaking, any computer needs a desk. And the laptop is no exception. In a laptop, the keyboard has 101 keys, or 128. As you know, the touchpad plays the role of a mouse. Everything seems to be convenient. As much as we would not like, a laptop is still not a desktop computer. The main disadvantage is the computer screen, which is built-in and comes with a keyboard. With the stationary option, we can move the monitor from place to place. In general, put it in the way that suits us. At the same time, other components of the computer remain in place. This problem with laptops is easily solved with an additional keyboard. True, in this case, a computer desk will definitely be needed.

By connecting additional peripherals, the usability level of the PC is greatly improved. For the most part, it depends on the presence of a normal computer desk. You will agree that using a computer mouse on your lap is not so convenient. It is much more pleasant to move it on a flat surface.

If you put a laptop on a sofa, pillow, blanket, it will adversely affect the performance of the computer. The problem is elementary - all laptops are heated. With such careless use, your PC will definitely not last long. Why, ask, a computer desk for a laptop, if you can get by with an ordinary small portable table. It is worth noting that if you use a portable device, departments for a stationary car will always find use.

Before choosing a computer desk, it is important to pay attention in advance to what tasks you use the PC for. In the case of serious work with documentation, a straight table is quite suitable for its ergonomics and style. For entertainment, it is better to choose the corner version of the table. The combined table diversifies your field of activity and entertainment time. In addition to the type of table, it is important to consider the selection of materials and the assembly process.

Poor quality working materials are unlikely to contribute to the long life of a computer desk. The fact of the assembly of the structure itself is also important. Above in the text, phased options for performing the work were considered. None of these points will be done correctly if you do not develop a drawing from the very beginning. Before starting any business, you need a plan. So you can’t start assembling the table without a drawing.

In this way, you end up with a product that fully meets your taste and functional preferences. And it doesn’t matter if you are making a table for a laptop or a desktop computer. Much more important is its ergonomics, functionality and practicality.

Video: Do-it-yourself computer desk assembly

Photo gallery: Models of computer tables and drawings

If you have a desktop computer, then in the apartment, along with the obligatory pieces of furniture, there must be a special design table that allows you to place a complete set of personal PC equipment on it. Moreover, very often it is not always possible to purchase a table that is ready for use, since many of the proposed models simply do not fit into the atmosphere of a particular apartment. The easiest way out of this situation is to self-assemble a table for a PC, made taking into account the characteristics of the room allotted for it. But before you make a computer desk with your own hands, you definitely need to familiarize yourself with the known options for these prefabricated structures, as well as with the features of their manufacture.

Design choice

The whole variety of well-known models of computer tables used in domestic conditions can be reduced to the following three types:

• corner;
• with a direct arrangement of a table-top;
• combined.

In the case of self-manufacturing of the table, the choice of the option suitable for you should be made taking into account the following requirements:

• ergonomics;
• the right choice of location, taking into account the quality of natural light, depending on the location of window openings;
• availability of raw materials and ease of manufacture.

The first of these requirements means the creation of conditions that ensure the convenience of using the computer environment (mouse, keyboard, system unit and monitor). The possibility of their implementation should be provided for by the very design of the future product.

As for choosing a place for a computer desk, here, first of all, the protection of the display screen from direct solar radiation, which can lead to burnout (fading) of its cells, should be taken into account, and it is very inconvenient to work in such lighting. That is why the stand with the display, which is part of the product, should be positioned in such a way that the light from the sun does not fall directly on it, regardless of the orientation of the windows in the room.

The choice of a workplace with a low level of illumination (windows are located on the north side, for example) is also undesirable, since this complicates the work with paper documentation and in this case additional lighting will be required even during the day.

The most convenient option is the western or northwestern location of the windows in the room allotted for a PC. The choice of a specific desktop option (angular, straight or combined) depends on a number of factors that will be discussed below.

A feature of corner structures that occupy a minimum of space in the room is its compactness and the ability to organically fit into spaces limited in area. In addition, such tables are cheaper in terms of total material costs and easier to manufacture than all other models and therefore can be easily made even by a beginner in plumbing.

The shortage of usable area in such a structure can be compensated by an increase in its number of storeys, i.e. due to the manufacture of an additional retractable panel for the keyboard and a separate shelf for speakers. In a simplified version of such a product, the system unit is installed directly on the floor of the room (under the table).

Full straight table

The difference between a direct computer desk and a regular desk is that its individual sizes and shapes are adjusted to the requirements of ergonomics. In addition, when organizing its free space, you can choose any depth of zoning that is convenient for you. In other words, this design allows you to implement a wide variety of equipment layout options, from allocating a separate place for a display on a tabletop to a complex multi-level organization that allows you to place everything you need for professional work.

Materials for the manufacture of such a table will require approximately twice as much as for the arrangement of a corner structure. In addition, its self-assembly will require the performer to have carpentry skills related to the processing of various types of wood material.

Combination table combines the advantages of a computer and a simple desk and is ideal for professional work at home. However, you will need much more materials for the manufacture of such a table (by about 30–40%), since the manufacture of complex structural elements is associated with the formation of a large amount of waste. In addition, for the preliminary sawing of these elements, which is carried out immediately before their assembly, you will need a special cutting tool (an electric jigsaw or a hand mill used to select curly grooves).

The simplest and most affordable for self-manufacturing is the angular design, which allows, with a minimum of material and physical costs, to provide the required ergonomics and ease of placing the table within a small room. It is this option that we will consider in the future.

Manufacturing procedure

For the manufacture of a corner table, a dense laminated board (chipboard) is usually used, which provides the required reliability and durability of the structure assembled on its basis.

Frame manufacturing

To make it, you will need the following raw materials and tools:

• chipboard blanks;
• jigsaw and screwdriver;
• a small sketch with instructions on the dimensions of the structural elements;
• pencil and ruler;
• aluminum corners;
• wood glue.

The assembly of the frame base is carried out in the following sequence:

1. First of all, according to the sketch, all the main blanks from chipboard are cut out, used to decorate the two rear walls, sidewalls and the tabletop itself.
2. Then they are directly assembled, for which you will need the previously prepared corners and small wood screws (in order to avoid splitting the plate, their length should not exceed 1.5 cm).
3. During the assembly process, first of all, the tabletop is fixed on the extreme sidewalls, and only after that the back walls are mounted, giving it the necessary rigidity.
4. After the supporting frame of the table is assembled, it will be possible to proceed to the installation of intermediate partitions, through which several working compartments are made out (for the system unit, keyboard, as well as for placing literature, documents, etc.).

Mounting features

In the process of manufacturing a computer desk, we recommend that you pay attention to the following subtleties of assembly operations regarding the design of fasteners:

For fastening, it is best to use confirmations, but you will also need to purchase a special drill for them. If the design is simple, then you can mount with self-tapping screws.

1. Before screwing the self-tapping screw into the slab, first a hole is prepared at the attachment point with a thin drill (to a depth corresponding to the length of the self-tapping screw).
2. To increase the strength of the structure and ease of assembly, individual attachment points can be reinforced by pre-treatment with a special adhesive composition. In this case, the adhesive can be applied both to the area where the self-tapping screw is screwed in (directly into the hole), and to the contact areas of the joined workpieces.
3. When screwing in self-tapping screws, the screwdriver must operate in low speed mode; at the same time, it is important not to overdo it with tightening the mount (which is why it is most convenient to use special models of devices equipped with so-called ratchets for these purposes).

Installation of the sliding panel under the keyboard begins with fixing metal profiles used as guides on adjacent side racks. (They are usually installed about 20 cm below the level of the countertop).

On the panel itself, small rotating rollers are attached, through which it moves along with the keyboard.

Upon completion of all the procedures described above, the resulting structure is necessarily checked for strength, after which it will be possible to proceed to placing the entire set of items from the computer environment on it.

Video

See how you can make a computer table from chipboard scraps with your own hands:

An interesting solution is a computer desk transformer:

A photo

The age of modern technology is characterized primarily by an abundance of functional technology, the task of which is to make life easier for a person. Not the last place is occupied by computers and laptops. Agree, today you rarely meet a person who does not have this technique. This, of course, is good. But after all, a computer or laptop needs to be placed somewhere, and buying ready-made furniture is not always the best option. And expensive, and you will not always find what you want to see in your room. There is a great way to solve this problem - to make a computer desk with your own hands. This is what we will do in our article.

Where to start

Before you make a computer desk with your own hands, you need to clearly imagine what you want to get in the end. In other words, you need a project. And if you are determined and want to get furniture at the end of the work, which will become a real solution, you should think it through to the smallest detail.

First of all, pay attention to the functionality of the table. Estimate whether additional shelves, drawers, special stands will be needed. Maybe it would make sense to make sliding shelves.

Next, it is important to consider the height of the structure. It is recommended to make a standard ordinary table for a computer with your own hands within 750 mm. These dimensions include the tabletop. For a child, you can choose a lower height.

Do not lose sight of the estimated size of office equipment and the number of items. Before you cut the shelves and make boxes, you need to measure everything with a ruler or tape measure. Then you don't have to redo it in the future.

And finally, it is necessary to take into account the general parameters of the room and the place where it is planned to put the furniture. It should be comfortable, the lighting should be correct. Only then the person sitting at the table will not feel discomfort during work. The same parameters should be taken into account if you want to make a table for a laptop with your own hands.

DIY table video

Video: How to make a computer table (How to make a computer table)

Materials and tools that will be required during work

Making a computer desk with your own hands is a laborious process that requires patience and attention. After drawing up the project, it is necessary to decide on the materials that will be used. Most often, tables are made from:

• natural wood;

A table for a computer or laptop made of wood is preferable to others, but at a price it will cost much more and it will still have to be varnished. MDF and chipboard - materials are much cheaper and not much inferior to solid wood. In addition, they perfectly tolerate high humidity and are insensitive to damage.

Which material to choose is a matter of taste. But the tool with which the work will be performed must be available. Most often, the usual set is used, which every man has, even a not very experienced master:

• hacksaw, electric jigsaw;
• Grinder;
• drill;
• screwdriver;
• chisel;
• roulette;
• square.

Naturally, this list may be slightly different, since it all depends on the design of a do-it-yourself computer desk.

Several ways to make a table for office equipment

As mentioned above, it is not necessary to have special building skills in order to make a computer desk with your own hands. There will be enough initial knowledge, desire and patience. For a more complete picture of the upcoming scope of work, we will give several ways to make a table for a computer with your own hands.

Method one: a simple rectangular MDF table

For work, we need an MDF board with a thickness of at least 16 mm, a set of tools from the list above, self-tapping screws, glue, and accessories. First of all, we measure the place where the furniture is planned to be installed: width, length and depth. Based on these parameters, making a computer desk with your own hands, drawings are drawn up. Only after completing these steps, you can cut the MDF into pieces and mount the table further:

1. Using a screwdriver and self-tapping screws, we fasten the side parts with guides.
2. The side modules are assembled using dowels. Greater strength can be achieved using special glue
3. We use MDF 4 mm thick as the back wall, we assemble the table walls into a single whole.
4. Using the drawing, we cut out the elements of the boxes and shelves, make a fitting and fix the boxes with clamps. We process the side surfaces with an edge tape.
5. On the underside of the tabletop of the computer table, we mark with our own hands the attachment points of the supporting pedestals. Using a drill, drill blind holes.
6. Using screws, we fasten the cabinets to the inverted tabletop.
7. We turn over, fasten the hinges, hang the doors and put the drawers and shelves in place;
8. We fix the monitor stand using round wooden bars, piping and glue.
9. We cover the made table with a primer, paint it in the desired color and begin to use it for its intended purpose.

Tip: in this way you can make a computer table from chipboard with your own hands and take any other material.

Method two: corner table for a computer

Now let's look at how to make a corner computer desk with your own hands. This work will require a little more attention, but the result will please - the empty corner of the room will function, and there will not be less free space.
So, for work we need the following tools and materials:

• screwdriver or screwdriver;
• drill;
• clamps;
• wooden dowels;
• electric saw;
• a knife sharp enough;
• iron, edging tape, ruler, square and pencil;
• joiner's glue;
• self-tapping screws.

As a material, we take MDF sheets with a thickness of 16 mm, and for support elements - hardwood.
To begin with, we measure the space and make a drawing, according to which we perform the detailing of objects.

If you do not know how to work with drawings, look for ready-made material. Do-it-yourself corner computer desk drawings can be found on the Internet.

Having prepared all the details, we adjust everything in size and proceed to the assembly, which must be completed in stages.

1. We assemble the side parts of the table on the dowels, fasten the guides for the shelves inside and the drawers that will be pulled out. You can strengthen the fastening with glue.
2. We fix the rear walls with self-tapping screws.
3. We process the side edges of all structures with an edge tape, gluing it with paper and a hot iron. Cut off the excess with a knife.
4. On the inside of the tabletop, we mark the places for the support pedestals, drill blind sockets. We turn the tabletop over and in this position we fix the cabinets.
5. Next, return the table to its normal position, fix the side doors, install drawers and shelves.
6. We fasten the upper structure of the shelves with ties and put it on the table, install a stand for the monitor.
7. The table is ready. It remains only to paint it to match the overall interior. Thus, assembling a computer desk with your own hands is not as difficult as it seems.

If there is a laptop in the house

How to make a computer desk on our own, we dismantled. But what if there is a laptop instead of a computer in the house? It would seem that the thing is quite mobile and does not require additional stands. But, as practice shows, lying in bed or on the sofa with a laptop in hand is not always convenient. Therefore, now we will make a table for a laptop with our own hands.

The easiest and free option

First of all, consider a design that does not require special building skills and not a penny of financial investment. It is tempting to make such a table for a laptop with your own hands. You can use parts of old furniture, remnants of repairs and other scraps of any building material.

Only three parts are required: 2 side pieces and a tabletop. Its size will depend on the size of the equipment. We will make a table top 270x660 mm. it is easy to cut, the main thing is to measure exactly.

It will be a little more difficult with the side planks: they must have a beveled side, which is attached to the countertop. The dimensions of the side walls are 270×205×255×280 mm. it turns out that the back of our table will be raised by 280 mm, and the front, lowered by 205 mm. Thus, a small do-it-yourself computer desk for a laptop will have a slope, which will make it very comfortable to work with.

The side parts are attached to the tabletop with self-tapping screws and additionally reinforced with small corners. This enhances the strength and reliability of the structure. It remains only to paint or finish it to your taste and preferences. There is nothing difficult in such a design, and if a person likes to work out or have fun reclining, then why not think about how to make a table for a laptop with your own hands.

Another way: a folding table for a laptop

The folding design of the table is a little more difficult to make, but if you often have to move from place to place, you should think about how to make the laptop table convenient and mobile. You will need the following materials and accessories:

• countertop material;
• material for the side walls;
• screws or screws;
• 4 folding fastenings having a clamp.

As a material, you can use any that is available. We cut out the tabletop 600 × 400 mm, side legs - 400 × 310 mm. With the help of a ruler and a pencil, we mark on the inside of the countertop the place of installation of the leg mounts. We make holes for the screws, we fasten everything securely and that's it - our do-it-yourself computer desk, the photo of which you see is ready.

Under no circumstances do not forget to fix the folding structure in the desired position. Be sure to remove the latch when folding the table.

As you can see, there are a lot of ways to make a table for a computer with your own hands. The article dealt only with the most accessible and simple. But there are craftsmen who are able to create such furniture that you will not find in any store.

Well, for clarity, watch the video on how to simply and quickly make a computer desk with your own hands, using the information of which you will cope with the problem easily and naturally.

Video: Do-it-yourself computer table made from scraps of chipboard

Video: Computer desk

Video: Do-it-yourself computer and desktop made of plywood table weight 140 kg

Video: Do-it-yourself desk / PC case / system unit