How to make a New Year's wreath on your door. Making a New Year's wreath for the door. What do we need

Their own homes, workplaces and of course a Christmas tree.

A New Year's wreath is a great way to make any interior colorful and festive.

It is worth noting that such a wreath is a symbol of family warmth and hearth.

There are many ways to make a beautiful wreath for the New Year with your own hands.


On our website you will also find:

Here are some of the most interesting and simple Christmas wreaths that you can make with your children and hang them in the house or on the Christmas tree to decorate your home.

DIY New Year's wreath made of oranges and cinnamon

You will need:

Thin and flexible branches (for the frame)

Hot glue

Rope

Wire.

Decorations:

Pine branches or leaves with berries (natural or artificial)

Dried orange slices (you can use lemons)

1. Make the frame of a New Year's wreath from branches.


* To get dried orange slices, you need to briefly put them in the oven on low heat.

2. Using glue and wire, begin attaching decorations to the frame. You can glue the pine cones, attach the orange slices with wire, and tie the cinnamon with rope or pieces of fabric.

* Simply insert pine branches or leaves with berries inside the frame or you can secure them with wire or glue.

How to make a bright New Year's wreath with your own hands


You will need:

Cardboard or foam frame

Hot glue or tape

Decorations (bows, pipes, toys, etc.).

1. Cut out a frame for the wreath from cardboard or a piece of foam. You may need to cut out two circles and glue them together to make the frame stronger.


2. Start wrapping the frame with tinsel. You can use glue or tape to secure the tinsel in some places, but so that the attachment points are not very noticeable


3. When the wreath is ready, you can attach decorations to it. This can also be done with glue or tape.

DIY New Year's wreath made from candies (master class)


You will need:

Corrugated cardboard (cardboard from which boxes are made)

A compass or round object of the desired shape and a pencil (to draw a circle)

Acrylic paint

Foam rubber

A lot of candies.

1. Draw a large circle on a piece of cardboard (in this example the circle has a diameter of 22 cm)


2. Cut out a circle and draw another smaller circle inside it. Cut out this circle. You can use a stationery knife instead of scissors.


3. Repeat steps 1-2 to make another donut and glue the two donuts together to make the wreath frame stronger.


4. Use white paint to paint the cardboard frame of the future wreath.


5. Cut out a donut of similar sizes from foam rubber and cut several pieces, which then glue to a cardboard ring on both sides.


6. Wrap the frame with a bandage.


7. Prepare the candies - for this example we needed 300 grams. truffles. Try to choose light candies - they hold up better.

8. Cut double-sided tape into small pieces and stick them to the bottom of each candy, then glue all the candies to the wreath.


9. To make the wreath even brighter, you can fill the spaces between the candies with rain, beads and/or tinsel, which is attached with glue.



Here are a couple more options for New Year's wreaths decorated with candies:

New Year's wreath made of candies (photo instructions)


You will need:

Foam ring (wreath base)

Toothpicks

Soft candies (preferably jelly).

DIY New Year's wreaths on the door


You will need:

PVA glue

Scissors or utility knife

Aerosol or acrylic paint (if desired)

Decorations (ribbons, bows, small Christmas tree decorations).

1. Cut each cylinder into small rings. Press each ring until it forms a leaf shape (see image).

2. Glue all the rings together so that they form a wreath.

*You can paint the wreath if you wish.

3. Start decorating the wreath with bows, tinsel, Christmas decorations, ribbons, etc.

Wreath made of colored paper and cardboard for the New Year (photo instructions)


You will need:

Colored paper, colored cardstock, or patterned paper

Cardboard (for the base of the wreath)

Stapler

Scissors.



How to make a wreath with pine cones and fruits for the New Year


You will need:

Kitchen napkins

Green organza (if necessary)

PVA glue or hot glue

Decorations (artificial fruits, pine cones, flowers, leaves).

1. Roll the newspaper into a tube and make a ring out of it. If necessary, use two newspapers to make a ring.


2. Wrap the ring in a few more newspapers to make it more durable and prevent it from unraveling. Parts that protrude can be secured with PVA glue.

3. Give your newspaper ring a more attractive look. To do this, use white paper napkins to wrap around the ring.


4. If desired, you can wrap the ring with organza, securing it with PVA glue or hot glue. You can skip this step.


5. Now start wrapping the ring with tinsel, securing it with PVA glue if necessary.


6. Prepare small artificial fruits, flowers, leaves and pine cones. Start hot glueing them to the wreath.


*You can use any decorations, not just fruits or leaves. For example, you can buy bows, glue bright ribbons or small light Christmas tree decorations.

New Year's wreath made of Christmas balls (master class)

You will need:

Foam frame

Small Christmas toys

Glue (hot, superglue).

1. Remove the fastening from each Christmas tree decoration.

2. Start gluing the larger toys to the foam frame.

3. Continue pasting the frame with smaller toys and finish with the smallest balls.

* Not all New Year's balls are glued to the frame, some are glued to other balls. The main thing is to add toys until the foam ring is completely closed.

Beautiful wreath for the New Year with cells for gifts

You will need:

Corrugated cardboard (thick cardboard from a box)

Colored cardboard

Scissors

Knitting thread (any color)

Stationery knife (if necessary)

Cardboard cylinders (from toilet paper or paper towels)

PVA glue or hot glue

Acrylic paints.

1. Cut the cardboard cylinders into rings.

* If you want the fan to have not only small, but also large rings, then you can cut out strips from colored cardboard and glue the ends together.

2. If you wish, you can paint all or some of the rings with acrylic paint.

3. Cut out a large circle from corrugated cardboard, and in the center of the circle cut out another smaller circle - this will be the base of the wreath. You can make the base more durable by gluing two cardboard circles together.

* To cut a circle within a circle, it is easier to replace the scissors with a utility knife.

4. Wrap the thread around the base of the wreath.

5. Start gluing the rings to the base.

All that remains is to put small gifts on the “shelves”. You can wrap these gifts in paper and secure with a thin ribbon, as in the image.

DIY paper wreath for the New Year (master class)


You will need:

PVA glue

Scissors

Tassels

Acrylic paint (white)

Scrapbooking paper, colored paper or wrapping paper

Pictures on thick sheets (from old postcards, packaging, boxes)

Various other decorations.

1. Prepare several sheets of newspaper and twist them into thin tubes (see image). Glue the tip of the newspaper with PVA glue. The number of tubes depends on the thickness of the wreath.

2018-01-05 1:47

Galina Category: 2 comments

I offer an interesting idea to create a festive mood! Decorate your home with a beautiful Christmas wreath that you can create with your own hands together with your children or grandchildren! It’s especially interesting for those who didn’t do something similar for the New Year holidays. Interested? We tell you and show you how to make a Christmas wreath with your own hands.

Good afternoon to all readers and lovers of creative ideas and handicrafts!

Welcome to the blog again

I sincerely congratulate everyone on the upcoming New Year and the upcoming Christmas! I wish you and your families only the best - the fulfillment of your deepest desires.

It has already become a tradition to decorate a house, apartment, room or corner of a room for the holidays, and in particular Christmas. More and more often we arrange a festive composition at the entrance or on the chest of drawers.

And we hang a bright festive wreath on the door. In the Western tradition, it is customary to make wreaths and decorate the entrance with them not only for Christmas. There, a wreath arrangement can be seen simply at the change of season or before a family holiday.

Such wreaths can now be bought in almost every supermarket, but how can they create that atmosphere of enjoying their own masterpiece created with their own hands...

Imagine this dialogue:

- Where did you get such a beautiful wreath?
- We did this ourselves...
- What are you talking about? So great! It turned out beautifully, you can’t buy one like this.

It's really nice to hear such words. And even without such words, you simply feel pleasure in your work. And if you do it with your children... Can you imagine how much joy you can bring to yourself and your children?

For this we need

  1. Cardboard
  2. Fir branches, artificial ones (I used live ones)
  3. Glue gun
  4. Jewelry for decoration

Let's get started

  • Cut out a circle from cardboard
  • We make a hole in the circle.

  • We wrap the circle with threads. This makes it easier to attach our branches.

  • We begin to glue the twig one by one

Our circle is completely filled with twigs. We begin to decorate it and then we begin to fantasize! I decorated with balls, bows and beads. You can hang the toys that we learned to make earlier

It can also be attached to a wreath

Place it here too.

Our wonderful New Year's wreath is ready!

Also, for decorating the interior for the New Year and Christmas.

Another MK on how to make a Christmas wreath with your own hands

To do this job we will need

  1. Styrofoam (I took it from the laptop packaging)
  2. Large plate or compass and smaller plate
  3. Ribbon for wrapping a foam circle or fabric (I cut it from the remnants of the brocade from which Zhenya sewed the Snow Maiden costume)
  4. Plastic snowflakes or cut them yourself from paper
  5. Thermal glue gun (glue “Moment - crystal” and “Moment - gel” burns through the foam, so it is better not to use them
  6. Ribbon or cord for decorating a wreath
  7. You can take ready-made small balls or toys, also for decorating the wreath

Work order

  • Carefully and carefully trace the contours of a large plate with the sharp tip of a knife.

  • Carefully cut out a circle with a knife

  • Place a smaller plate in the center.
  • Let's circle it

  • Cut with a knife

Masking the foam

  • Wrap the finished foam hoop with tape.
  • I cut it in advance from leftover brocade

  • We begin to wrap the hoop.
  • Apply layers evenly, overlapping the previous one.
  • We drop a drop of glue onto the previous one, perhaps through a turn or two. This is necessary so that the tape does not move out, but is firmly secured. This will help you avoid accidentally ruining all your work.

  • The circle is complete.
  • The rest of the tape needs to be secured. To do this, drop a drop of “Moment - Gel” glue onto the edge where you started and onto the edge you finished with (First check on a piece of fabric or tape with which you wrap the hoop so that the glue does not burn through the fabric)

Where it dripped, I put pieces of plasticine. So that you can see.

  • We remove the plasticine.
  • Glue the remaining end of the tape.

Now our hoop is ready for sticking snowflakes

Decorate the hoop with snowflakes

My snowflakes turned out to be all different sizes. These are leftovers.

  • I distributed the largest ones evenly around the circle first. I had 4 of them

  • Then medium size
  • The last ones are the smallest...

This is how the finished wreath with snowflakes turned out.

By tying a bright ribbon on it, you can hang it in its designated place. But I want something brighter...

Digression about candlesticks

By the way, if there are no candlesticks, you can use wine glasses and stemmed glasses. A little imagination and you get wonderful candlesticks. Since I burned my fingers and fell behind schedule, I didn’t have time to do much of what I had planned. For example, I didn’t have time to write an article about candles and candlesticks. But I had to figure out how to make them (candlesticks) quickly. Enter the wine glasses...

You can put red, gold, silver or blue Christmas tree beads in a glass. It all depends on how you intend to set your table or what kind of Christmas composition you want to create...

You can put a tangerine or a Christmas tree toy inside. Small Christmas balls or tinsel. Or you can even have candies... Place the entire structure on a small dish, porcelain or metal. Now the candlesticks are ready for the festive table.

While I was photographing candlesticks made from wine glasses for you. I was making a selection and came up with an idea - how to decorate a Christmas wreath...

What you need for decoration

  1. Found a golden cord
  2. I took red beads from a glass candlestick
  3. New Year's skewers for canapés
  4. Hot glue gun
  • We wrap a golden cord around a wreath with snowflakes.
  • Maintain the same spacing and slope.
  • We glue the cord on the back side with hot glue from a hot glue gun. And in this form you can hang it in place...

Adding brightness to the wreath

  • I decided to take red Christmas tree beads out of the glass.
  • I laid red beads parallel to the golden cord. They added a pop of color to our wreath.

After setting the New Year's table, I still had skewers for canapés. From them we will choose red ones with snowflakes.

  • Break off the skewers to the very base

  • Glue them on top of the snowflakes using a glue gun.
  • Choose a ribbon for the bow. It's better to take it red. I take the red one with white polka dots. Peas resemble snow...

  • Tie a bow on the wreath
  • Fold the edges in half
  • Cutting at an angle
  • Burn with a lighter.

So we solved the problem - how to make a Christmas wreath with your own hands

I placed it above the chest of drawers. Here we have Christmas and New Year's crafts. Candlesticks and sculptures. Paintings that my children and students made at different times.

The pictures were drawn by the eldest daughter, Marina... I haven’t talked about her work yet.

An Advent wreath is an obligatory attribute of the New Year holidays, and recently a ring of pine needles decorated with satin ribbons and candles was a rarity among us. Created in the mid-19th century in Hamburg, the calendar wheel helped illiterate children of the poor count the weeks and days remaining until December 25, the birthday of Jesus Christ.

This beautiful tradition quickly spread throughout the world and before each New Year, more and more doors and windows show off to each other variously executed Christmas symbols. You can buy a ready-made wreath for Christmas, but it’s more interesting to make it yourself, decorate it in your own way, adding your favorite colors and details.

What should you remember?

  1. A wreath is always a circle, a ring without end or edge.
  2. There are no strict rules in decoration - only imagination and good mood.
  3. The place for the Christmas wreath is on the front door, in the window, on the table.

Material

The key to success is a good base: a circle made of cardboard, plywood, wood, dense foam, even, preferably with a hole in the center.

Traditional filling materials are spruce paws, candles and satin ribbons, but any other material, familiar or simply nearby, can be used.

Sweet Christmas wreath

Confectionery is an excellent material for crafts! Anything is suitable: cookies, especially shaped cookies, colored caramels, marshmallows, marmalades, chocolates in shiny wrappers. The photo shows different types of sweets that make up a wonderful winter ensemble.

All this deliciousness is placed in a circle and secured with wooden toothpicks on a pre-baked large bagel made from sweet dough or on any other base. Unusual, bright, tasty.

Try making a New Year's symbol from other products - sausages, groceries. of different types and sizes, and even painted with bright colors, cause a smile, laughter and a completely New Year's mood. And the tinsel, burlap, newspapers!

Gifts of nature

Inspiration is drawn by painting and arranging pine cones, red rowan berries, and juniper branches in a circle. The composition can be connected with glue, pins, nails, multi-colored threads, twine and always red or white satin ribbons. The proposed photos are already realized ideas, choose or create. And at the link - as many as 7 master classes about.

Wreath of Christmas balls

The most affordable material for making a wreath is old Christmas tree balls. They are very easy to attach to the foam base using paper clips. If desired, you can add real or artificial fir branches.

Felt Christmas wreath

Skillful hands make a lot, and in the house there is always one or two soft toys of animals and snowmen. A little imagination - and funny figures will line up in anticipation of the solemn winter event.

Christmas wreath made of newspapers and paper

This simple and accessible material is always at hand, and unusual ideas are in the photo!

Ribbon decor

Even the smallest crafters can handle these wreaths. Take a large number of ribbons and arrange them artistically on the circle.

Variations with shape

Classic wreaths are round in shape, but modern wreaths have many variations and creative solutions: rectangular, square, heart-shaped and herringbone.

Simple master classes for everyone

From Christmas tree toys

And now a short instruction, a master class with step-by-step photos on how to make a beautiful Christmas wreath.

Wrap the base ring tightly with yarn or braid of any color. Attach multi-colored balls of all colors in random order to the base (with pins, brackets, paper clips).

Dried fruit wreath

A necklace made of rings of dried oranges and tangerines without a center, strung on thick wire, is well complemented with a real Christmas bow made of dyed burlap. How to do this can be clearly seen in the photographs.


Brushwood and balls

Weave the base from thin branches of willow and birch for strength, tying the project together with twine. On a dark background of tree bark there are touching snowflakes made of foam plastic, sparkling tinsel, a translucent nylon bow.

Symbol of the hearth - textiles

A needlewoman's wreath is balls of multi-colored yarn, knitted with fragments of knitted fabric. Furry pom-poms will also work.

How to make pompoms: cut out two identical rings from cardboard, wrap them loosely with multi-colored fluffy yarn, cut the layer along the outer edge and, threading the wire between the layers of cardboard, pull the middle of the pompom together (see photo). The long ends of the wire will serve as fastening between the pompoms. Their number depends on the possibility and desire of the author, as does the final decor.

If you don’t have the skills to work with threads, knitting needles, or a needle, just wrap the ring in a knitted sweater - the texture of the knitwear creates a wonderful image of soft home warmth. One or two bright bows, a cardboard figurine of an angel, a deer, will remind you of the New Year holiday, Christmas.

No matter what the Christmas wreath is made of, it always symbolizes joy, anticipation, and invites everyone to get together to celebrate the most solemn and significant day of the year, to wish each other peace and happiness.

Before you make the base for a wreath with your own hands, you should decide what materials are within walking distance and are not classified as expensive. A variety of materials can be used as the basis for a wreath.

DIY Christmas wreath

Before you make a wreath of branches with your own hands, it will be useful to know that the most suitable materials are willow, birch, oak, etc.).

DIY Easter wreath

Young flexible branches (the bark of willow trees can be peeled off) are twisted into a ring and secured with wire, fishing line or string. The base must be left to dry for several days. Once dry, the branches will retain their ring-shaped shape. Before making a wreath of twigs with your own hands, you can choose different diameters of circles and form blanks of different diameters.

Straw base.

The straw also needs to be rolled into a ring and secured with wire or fishing line.

Straw base
Wire base

Wire base.

For such a base, it is advisable to use thick wire or wire folded in several rows.

Cardboard base.

Any thick cardboard will do. Cut a circle of the desired diameter from cardboard with a hole in the center. For strength (especially if you use corrugated cardboard), cut out 2 circles and glue them together.

Cardboard base
Foam base

Foam base.

Sold ready-made, of different diameters in craft stores. There is a base for double-sided wreaths (you can decorate both sides) and a base for a wreath, where only the top part is decorated.

To create a wreath, you can use a floral ring-shaped base of piaflora for dried flowers or an “oasis” for living plants.

The porous structure of these materials helps to hold decorative elements on the wreath.

Piaflora base
Wicker willow wreath

Wicker willow wreath.

These wreaths (of different diameters) can be purchased at craft stores. These basics are beautiful in themselves; one bright decorative element is enough to decorate them.

Base from newspapers.

Several newspapers are rolled up with a roller and a ring is formed, everything is fixed with tape. This base has a “non-marketable” appearance, so it needs to be decorated with something on top, for example, covered with fabric.

Newspaper base
Construction foam base


Construction foam base.

Draw a circle of the desired diameter on a piece of paper, then carefully squeeze the foam out of the can and let it harden. Excess frozen foam can be cut off with a sharp knife. From one balloon, several bases are obtained at once, which can be decorated with fabric, sisal or moss.

  • If you are making a light, airy wreath, then choose a base that is not very heavy. Opt for a wire or twig base.
  • For a solid, heavy wreath, a stronger base is chosen. Here it is better to use a foam base or one made from construction foam.

Before you make a decorative wreath with your own hands, you need to think about the options for its decoration, design style and overall design. Take a look around and you will see how many interesting materials you can use to decorate your wreath. It all depends on your taste. Any materials are suitable for decoration, from leftover paper, wallpaper to natural materials that can be found on a walk: leaves of various trees, berries, fruits, acorns, pine cones, herbs, cereals.

Examples of how you can make an artificial wreath with your own hands without any financial costs:

  • fresh flowers, plants, cereals, leaves, twigs with fruits;
  • dry cereals and leaves, dry meadow grasses; A wide variety of ornamental and wild plants can be dried. Cereals (wheat, oats, etc.) and various meadow herbs look especially beautiful in wreaths. There are many different ways to preserve flowers and plants. Here are just a few of them: drying in a natural state, hanging (herbs, cereals, buttercups, roses, etc.); drying in sand, silica gel (for example, the buds of some flowers are dried); drying in cotton wool, etc.
  • dried flowers (lagurus, popularly called “bunny tail”, decorative yarrow, helichrysum, statice, amaranth, etc.), poppy boxes, mature echinacea inflorescences, decorative onion inflorescences, dried roses, etc.;
  • sisal, coconut fiber, bast;
  • pine and spruce cones, acorns, moss, bark and various tree branches;
  • remnants of beautiful wrapping paper, wallpaper, corrugated paper;
  • various ribbons, braid, lace, sewing, beads, rhinestones, beads, etc.;
  • buttons of various colors and sizes, wooden, cardboard and plastic elements (they are also used in decoupage and scrapbooking);
  • artificial flowers, decorative fruits and vegetables, etc.

Basic tools that you may need for work

Basic tools that you may need for work

Glue gun and glue gun refills. This is a very convenient tool that makes decorating work much easier. You can use a gun to glue anything to the base: twigs, herbs, flowers, fabric, paper, wooden elements, etc.

Attention! Take precautions when working with a glue gun.

Wire. A stiffer wire is used to create a base, a softer one (wire that is used in beading or floral) is used to attach decorative elements to the base.

Floral tape in various colors. This is a thin elastic tape in a reel with a slight adhesive effect. The tape is used in various types of creativity: in quilling (paper rolling), in making flowers on wire, candy trees, beaded jewelry, etc. When using the floral tape, you should stretch it a little so that it sticks better to the stem. Under the influence of the warmth of your hands, the tape exhibits adhesive properties; it seems to stick to the surface. With its help, it is convenient to tie herbs, cereals, flowers, etc. into bunches.

Fishing line. It can be used to tie twigs into a wreath; in this case, it will be practically invisible, which means the wreath will look more aesthetically pleasing.

Household superglue for gluing small elements, such as rhinestones or beads.

Wire cutters.

Christmas wreath in the photo

See how to make a wreath with your own hands in the photos that illustrate this process step by step:

STEP #1
STEP #2