Projects of houses and baths. Projects of houses and baths Projects of two-story baths 6x6 with a toilet

The cost of building a log cabin bath 6x6 without finishing under the roof - 284,000 rubles

• The foundation is columnar. 2 blocks in a pedestal (for one-story houses) and 4 blocks in a pedestal on a cement screed (for houses with an attic). Concrete blocks, full-bodied, 200x200x400 mm in size. Pedestals are installed on a compacted sand cushion. Sand (PGS) is provided by the customer.
• External walls - profiled beam of natural humidity with a section of 145x90 mm (wall thickness - 90mm) Profile "block house" or straight.
• In total, there are 16 crowns in the log cabin of one-story baths. There are 17 crowns in the log house of baths with an attic.
• An open terrace (if any) on supports made of planed timber with a section of 100 * 150 mm, with shrink jacks. Fencing - a handrail from a planed bar with a section of 40 * 100 mm. Steps at the entrance.
• The height of the ceiling of the first floor in cleanliness (from the floor log to the floor beam) for one-story baths is 2.15 m (+/-50mm); for saunas with an attic 2.29m (+/- 50mm)
• The second floor is an attic. Clear attic ceiling height (from floor beam to ceiling beam) - 2.25 m
• The height of the roof in the ridge for one-story baths is 1.20 m.
• The pediments are a frame made of boards of natural humidity with a section of 150 * 40 mm, 100 * 40 mm. External finishing of pediments - lining (spruce / pine AB) 17 * 90 mm. Wind protection - NANOIZOL "A" (for buildings with an attic).
• In the pediments of one-story buildings, a door (1 pc.) And ventilation hatches (1 pc. For each pediment, under the ridge) are installed.
• Ventilation hatches are installed in the gables of buildings with an attic (3 pieces for each gable).
• Eaves and roof overhangs 200 mm wide (for one-story buildings) and 300 mm (for buildings with an attic). Cornices and overhangs are hemmed with clapboard (spruce / pine AB) 17 * 90 mm.
• The device of window and door openings with a dressing crown, without the installation of casing bars.
• Assembly of the house / bath at the customer's site.

The price of a 6x6 turnkey bath with a foundation and a stove is 433,000 rubles

• The foundation is columnar. 2 blocks in a pedestal (for one-story baths) and 4 blocks in a pedestal on a cement screed (for baths with an attic). Concrete blocks, full-bodied, 200x200x400 mm in size. Pedestals are installed on a compacted sand cushion. Sand (PGS) is provided by the customer.
• Waterproofing - roofing material in one layer.
• Strapping - a bar of natural moisture with a section of 150x100 mm. On the outer perimeter, the strapping is laid in two rows. The bar is treated with a protective composition.
• Floor logs - a board of natural moisture with a section of 40x150 mm per edge, with a step of 600 mm.
• Draft floor - a board of natural humidity with a section of 22x100mm. Steam, waterproofing - NANOIZOL S.
• Floor insulation - 100mm KNAUF/URSA mineral wool (or equivalent). Vapor barrier - NANOIZOL V.
• The finished floor of the first floor is a dry tongue-and-groove floorboard (spruce/pine AB) 36mm thick. Each fifth board is fastened with screws (for the possibility of further flooring).
• External walls - profiled beam of natural humidity with a section of 145x90 mm (wall thickness - 90mm) Profile "block house" or straight. There are 16 crowns in total (for one-story baths) and 17 crowns (for baths with an attic).
• Partitions of the first floor - profiled beam of natural humidity with a section of 145x90 mm, straight profile. They cut into external walls with a depth of up to 30mm.
• Mezhventsovy insulation - jute cloth 6 mm thick
• Interconnection - on a metal dowel (building nail 6x200mm, 250mm).
• Corner connection - "in half a tree." The outer corners of the log house are sewn up with clapboard (spruce / pine AB) 17 * 90 mm in two rows.
• An open terrace (if any) on supports made of planed timber with a section of 100 * 150 mm, with shrink jacks. Fencing - a handrail from a planed bar with a section of 40 * 100 mm filled with carved balusters. Steps at the entrance.
• Terrace floors - dry tongue-and-groove floorboard (spruce/pine AB) 36mm thick. Fasten with self-tapping screws to each board. Boards are laid in 5 mm increments.
• Terrace ceilings - lining (spruce / pine AB) 17 * 90 mm. Vapor barrier - NANOIZOL V.
• The ceiling height of the first floor in cleanliness (from floor to ceiling) is 2.10 m (+/- 50mm) - for one-story baths and 2.25 m (+/-50mm) - for baths with an attic.
• The filing of the ceiling of the first floor (except for the steam room) - lining (spruce / pine AB) 12.8 * 88 mm. (joint for layout is allowed)
• The second floor is an attic. Clear attic ceiling height (from floor to ceiling) - 2.20 m
• Floor insulation - 100 mm KNAUF / URSA mineral wool (or equivalent). Vapor barrier NANOIZOL V.
• Attic floors - dry tongue-and-groove floorboard (spruce / pine AB) 36mm thick. Each fifth board is fastened with screws (for the possibility of further flooring).
• Sheathing of the walls and ceiling of the attic - lining (spruce / pine AB) 12.5 * 88 mm (a joint for layout is allowed).
• Attic wall insulation - 100mm ROCKWOOL basalt mats (or equivalent). Vapor barrier - NANOIZOL V.
• Partitions of the attic - a frame made of a bar of natural moisture with a section of 40 * 75 mm, sheathed on both sides with clapboard (spruce / pine AB) 12.5 * 88 mm. Partitions are not insulated.
• Rafters - farms from a board of natural humidity with a section of 150x40mm., 100x40mm. Are established with a step of 900-1000 mm.
• The pediments are a frame made of boards of natural humidity with a section of 150 * 40 mm, 100 * 40 mm. External finishing of pediments - lining (spruce / pine AB) 17 * 90 mm. . Wind, moisture protection - NANOIZOL "A" (for baths with an attic).
• In the pediments of one-story baths, a door (1 pc.) And ventilation hatches (1 pc. For each pediment, under the ridge) are installed.
• Ventilation hatches are installed in the gables of baths with an attic (3 pieces for each gable).
• Lathing - a board of natural moisture with a section of 22 * ​​100 mm, with a step of 300 mm. Counter-lattice - rail 20 * 40 mm, along the slopes of the rafters.
• Roofing - ONDULIN (burgundy, brown, green) or galvanized corrugated board. Underroofing vapor barrier - NANOIZOL S.
• Cornices and roof overhangs 200 mm wide (for one-story baths) and 300 mm (for baths with an attic). Cornices and overhangs are hemmed with clapboard (spruce / pine AB) 17 * 90 mm.
• The staircase to the attic is single-flight, on bowstrings made of planed timber with a section of 145 * 90 mm. Floorboard steps. The handrail and the fence in the attic are a planed bar with a section of 40 * 100 mm.
• Finishing the walls and ceiling of the steam room - lining (aspen B) 14 * 90 mm (a joint for layout is allowed). Reflective insulation on a foil basis - NANOIZOL FB. Counter rail - 10 * 40 mm (ventilation gap - 10 mm). Before sheathing, the timber base of the walls is treated with a protective composition for baths and saunas NEOMID 200.
• Two-tier shelves made of planed board (aspen B) 28*90 mm. The width of the step - 40 cm (height - 50 cm); lounger width - 60 cm (height - 110 cm).
• Installation of the ERMAK 12 / ERMAK 16 furnace with a hanging tank (stainless steel 35 l) for heating water.
• The basis of the furnace - a brick in one row. Cutting furnace portal - brick.
• Fire insulation - basalt cardboard, ceiling and roof passages, a reflective screen made of smooth galvanized steel on basalt cardboard, inflow sheet.
• The flue - vertical, with an output in a roof through a ceiling. Starting pipe - stainless steel 0.5 mm, stainless steel gate valve, stainless steel starting adapter, sandwich pipes 115 * 200 mm (stainless steel 0.5 mm * galvanized 0.5 mm), galvanized head.
• Installation in the washing shower tray 800 * 800 mm with a siphon. The outlet of the drain outside the perimeter of the bath is a sanitary PVC pipe with a diameter of 50 mm.
• Windows - wooden, double-glazed, with a seal and fittings (screw hinges, twist locks). Inward-opening doors. Dimensions (h*w) 1200*1500 mm; 1200*1000 m; 1200*600mm; 600*600mm; 400*400 mm. Windows are installed in casing boxes.
• Entrance door - wooden, paneled, deaf (spruce / pine A). Size (h * w) 1800 * 800 mm (for one-story baths; 2000 * 800 mm (for baths with an attic). Handles, hinges. A padlock is installed on the front door.
• Doors interroom - bath, frame (aspen A). Size (h*w) 1750*750 mm. Handles, hinges.
• Casing bars (swarms) are installed in window and door openings.
• Sealing of corners, joints, junctions - plinth spruce / pine A / aspen AB.
• Finishing of windows, doors - architraves spruce / pine A on both sides, aspen AB
• Nails for fixing parts - construction black.
• Nails for fastening lining - galvanized 2.5x50 mm
• Nails for fastening the plinth, layouts - finishing galvanized 1.8x50 mm.
• Loading, delivery up to 400 km from Pestovo, Novgorod region, unloading of a set of material.
• Assembly of the bath at the customer's site.
• BONUS. Steam room accessories. Stones - gabbro-diabase 40 kg.

We have compiled for you a convenient table of differences in the configuration of baths for shrinkage and turnkey.

The whole country rests on such workers

Alexey Gennadievich!!! Due to the lack of time, I could not write to you in any way - many thanks for the work of your employees in the construction of the bathhouse, two young men, unfortunately, I don’t know their names, they worked clearly and harmoniously, the quality of the bathhouse is EXCELLENT !!! The whole country rests on such workers. All friends and relatives also noted the impeccable work of the guys, as a result of which they dreamed of a bathhouse.

The guys built us an amazing bath

I want to express my deep gratitude to Alexey (general director), Zorin Sergey and Chistyakov Vladimir (builders)! In early August, the guys built us an amazing bathhouse, taking into account all our wishes. The delivery of materials was carried out on time, the construction was completed even ahead of the time agreed earlier, the quality of materials and work was at the highest level. In general, just a fairy tale! I advise you to build only with Russian carpenters!

"Price quality"

The work is pleasing to the eye. Fast, high quality, on time. I thank the team of guys (Evgeny, Dmitry, Sergey) and the general director Alexei Roslov for the work done. I ordered a bathhouse with an attic 6x6 project B-20 with minor changes, “for shrinkage”. All work was completed ahead of schedule and with high quality. All my wishes were taken into account. I was very pleased with Alexey Roslov's attitude to his work. He always promptly and competently answered all my questions, settled controversial issues. The team, despite the young age of the guys, worked quickly and smoothly, at the end they gave advice on caring for the timber and conservation for the winter. Next year I will do the finishing with the same team. "Russian Plotniki" wins in all positions in comparison with other large companies. “Price-quality” is about them. Thanks again. I will recommend to everyone.

They built a house for me in 2018, according to my project, by professionals in their field. The project itself is somewhat more expensive than its competitors, but in our village they built 1 more house and the owners were satisfied.

They ordered the construction of a bathhouse, they did it in the shortest possible time, without any complaints about the work of the team.

The full cycle from the production of material to the assembly of the house is perfectly organized. Quality, professionalism at the highest level. I recommend.

It is very important to find your manager, who will advise not only at the conclusion of the contract, but also during construction. We talked with Igor, as a result, the bath is ready on the site, we use it, everything is fine. Thank you.

Great home, great service! Everyone was helpful and helpful with the selection. You can see everything live - we went to a facility under construction similar to ours, where they saw how they work, only after that they decided to build. Thank you for the patience of managers and builders that answered all the questions!

In 2018, we ordered a bathhouse. We are very satisfied with the work of the employees of this company. Starting with the estimate and ending with a team of builders. We were lucky for the action, we received a sauna stove as a gift!

Thanks for the sauna house. On the site one price is indicated, but in fact it turns out more. But it’s understandable that the price is indicated for the very minimum, like everyone else on the Internet, if you want to comfortably pay extra for extras. In general, "thank you" to the builders.

The 6 by 6 bath project is the best option, as it even allows you to accommodate a pool. All rooms are spacious and roomy. A 6x6 log sauna with a terrace will be an ideal option for a large company. In the summer, you can relax in the fresh air, hiding under a roof in the shade or from the rain.

Let's take a closer look at the possible layout options:

1. Steam room. It is necessary to think in advance how many people will be in the steam room at the same time, and from this select the square of the room. Option 2x2 sq.m. suitable for three people, and in 2.5x2.5 you can already place eight. Here, as a rule, a stone oven and wooden shelves are installed.
2. Shower. The area of ​​​​the premises is often three times smaller than the previous one, but there are projects with equal areas. Usually a shower is installed here, you can fit a font or a small pool.
3. Restroom. The area of ​​\u200b\u200bthis room should be at least twice as large as the previous ones. This is where most of the time is spent. Therefore, it is necessary to plan in advance how to fill it: sofa, table, TV, etc.
4. Terrace. Usable area for any bath may vary depending on the plan.

Projects of two-story buildings increase the space for recreation. The room is smaller than the first floor, as it is located under the roof. On the second floor there is a balcony and two rooms in the project.

Features of the construction of the bath

The construction of wooden baths does not provide for a deep foundation. The weight of the materials allows the use of a tape base.

Beam technologies offer a choice of:

• whole beam. It is inexpensive and popular in construction;
• profiled beam. Easy to erect, does not require finishing outside;
• glued beam. Expensive and durable option.

The layout of 6 by 6 m is the most optimal for baths made of timber. The area of ​​​​the premises allows you to accommodate a large company.

A bath made of profiled timber from the company "Russian Spaces" is simply and quickly assembled, looks aesthetically pleasing, and will serve you for many years.

Our manager will advise on all issues and help you choose the right project for you or make changes to an existing one.

The banya is so Russian, sincere, that we are no longer amazed when we see it on someone's site. Why be surprised? Need to build!

The layout of the bath 6 × 6 begins ... No, not with the purchase of timber or bricks, but with the preparation of brooms. Looking at them, and the work goes on, and time runs faster, and the thought of a steam room warms the soul. Well? Already want to steam?

If you managed to allocate a place on the site for a future steam room, you can arrange a classic bathhouse, a sauna, and a hammam there. Although they have one purpose - to relax the human body, warm up, remove all ailments and ailments. What kind of bath will you have? Without an attic or with it? Perhaps with a terrace, a veranda, a pool inside. With such an area, you can afford almost everything.

What should we build a bath? What would it be from?

Yes, I would like the smell of natural wood in the steam room itself, in the relaxation room. Then wooden lining, wooden panels will help you.

If you need a bath urgently, you can buy a ready-made frame structure. Outside it is lined with stone or brick, and inside it is trimmed with wood. But in this case, you should not even think about building a second floor - the walls will not withstand.

Did you see? Pass by

What materials for the construction of a bath should not even be considered?

• Synthetic materials for the walls will not work.
• Plastic panels should not be used.
• Raw tree. Even if you yourself chopped logs, they need to dry in natural conditions for a year or two.
• Wooden walls must not be varnished or painted. Drying oil also cannot be used, no matter how the seller in the store assures you. It is a product of oil refining. So, from natural there is only a bank - that is, nothing. And its contents will harm health.
• Any materials containing synthetic ingredients.

Do not hesitate to ask for quality certificates for the purchased products.

Zoning a bath

When developing various types of 6 × 6 bath layouts: with an attic and a toilet, with a pool, dressing room, veranda or without it, it is worth remembering that the dimensions of 6 meters are the external parameters of the building. Depending on the type of building material, the internal area will decrease to a lesser or greater extent.

An example of the layout of a bath 6 × 6 on one floor

The design of the 6x6 bath gives more options for fantasizing than the 6x4 sizes. But they have the same layout.

• dressing room;
• washing or shower department;
• steam room;
• restroom;
• terrace;
• bathroom;
• pool room.

You can find a place for the furnace zone, where a supply of firewood will be stored or there will be a mini-boiler room, a water-heating tank.

Sauna 6×6 with a large relaxation room

The steam room is the heart of the bath

If the frame of the bath is strong, you can immediately consider the layout of a two-story bath 6 × 6. Equip a rest room and a billiard room on the second floor, and all other rooms on the first floor. Now you can receive and entertain a much larger number of guests and friends.

It's all in the details

Sauna stove and water tank

Baths need to be heated and hot water.

In a 6×6 bath, it is practical to use a stone oven. Metal heats up quickly and cools down just as quickly. Therefore, its heat is not enough for all rooms.

The pool in the bath is a dream

If there is a second floor, the pipe coming out of the stove must be lined with bricks like a Dutch stove (for 3 wells).

In addition to the oven, you will need a boiler or water heater. Often, wanting to save on footage, they combine a hot water tank and a stove - very reasonably.

Tank types:

• combined. The stove heats up the water. True, because of this, it gives a little less heat to the rooms;
• pipe. Stove separately, tank separately. And the tank can be placed indoors above the stove to be closer to the chimney;
• remote. They are equipped in the shower compartment and require the installation of a heat exchanger.

When choosing a tank, roughly calculate how many people will be steaming in the bath at the same time. 10 liters are needed for 1 person. And for 6 - at least 60-75 liters.

Restroom

If it is located on the second floor, there is a place in it for a billiard table, and for a bar counter, and for a couple of cozy sofas.

Does the layout include a balcony or terrace? Take out and there a couple of chairs with a table. Note that the internal area will decrease in this case.

Accommodation on site

6×6 is a decent size for a building. But the bath should not block the entrance to the house or immediately attract attention.

It is better if she stands at some distance, hidden from prying eyes by a hedge, a fence. Then next to the steam room it will be possible to put a large barrel or equip an artificial pond for contrasting procedures. This is if there was no place for a pool inside.

The layout options for 6×6 baths presented below will tell you in which direction to move. Or donate a dressing room, combining it with a dressing room. This will allow the steam room or pool itself to do more. Or to allocate space also for the kitchen. And then you get a small residential house with an additional highlight in the form of a steam room. And so, and so good.

For a large family and a medium-sized family, we offer bath projects the most appropriate size 6X6 meters. A bath of this size will allow you to freely accommodate all family members, invited guests, in order to have an exciting evening. If the project provides for a second floor and an attic, then the owners will not have problems accommodating guests for the night. At the same time, the price of such a bath will be as affordable as possible.

We offer a variety of projects log baths or from a log, sufficient space of the premises allows you to develop a project not only functional, but also quite attractive bath. Its main decoration can be a veranda, where it is nice to sit in a close family circle behind a samovar after a steam room, or a pool that allows you to fully appreciate the water coolness. Most often, the bath room is divided into several functional departments. It can be a dressing room, a steam room, a washing room and a rest room. However bath projects in Moscow, where the rest room is combined with a dressing room, also look very attractive.

We offer projects where the area of ​​the steam room most often slightly exceeds the dimensions of the washroom. At the same time, a stove-heater is installed in the steam room and laid in two tiers. In the washroom, at the request of the owner, you can install a font, a shower tray, and an oak barrel, popular in our time, designed for spa treatments. The relaxation room provides space for a comfortable table and sofa. layout 6 by 6 m allows you to provide a bathroom, the arrangement of which will require no more than 2 m 2.

Variety of bath designs 6X6 provides for the arrangement of the terrace, but if the terrace is abandoned, then a small pool can be placed indoors. And although when developing such projects, we advise you to slightly reduce the area of ​​\u200b\u200bthe washing or relaxation room, or, as an option, combine the pool and the relaxation room, having your own pool that can be used during the cold season is worth it. If a order bath with a bath project with a pool, it is useful to equip a cornice overhang with access to a small courtyard, which can partially replace the terrace

The price for a turnkey log house 6x6 in two floors will be the same as for a turnkey log house 6x6 in one floor, so you can choose the bath that suits you. When developing such buildings, the specialists of the company "Tsar Bath" necessarily take into account the features of the landscape and the appearance of the main estate, which allows you to perfectly fit the structure of the bath into the space of the site.

Two-story baths allow you to equip an additional lounge with a billiard table or a guest room on the second floor. Look great log bath projects with a small balcony where you can equip a place for tea drinking.

In our company you can order bath projects 6X6 turnkey, which will ideally match the space of the site. The specialists of our company will help you create a bath that will ideally match the landscape of the site in accordance with the budget of the customer.

When erecting a building from a log or from a log house, we carry out every stage of construction, from project development to finishing work. After the construction is completed, we hand over a fully finished building, which will not need to be completed.