Types by purpose:
- installation of heating mains - for main heat supply;
- pipe Uponor for water supply;
- sewer - for pressure sewerage.
The Ecoflex polyethylene line is represented by the following variations:
- Quattro - for connecting heat supply communications in separately located buildings. They are used for circulation of hot water, supply of water flow for household needs. Convenient for connecting communications in pairs to single-family houses of a local boiler house, houses of tape building, multi-apartment buildings.
- Thermo - represented by two subspecies - Single, Twin. The first is characterized by one heat-insulating pipe, the second - by two (supply and return with a diameter of up to 63 mm). Provides reduction of expenses for the electric power, operation, reduction of thermal losses. Responsible for the distribution of water in the local heat network. It involves the connection of private residential buildings, building complexes. In winter, it is responsible for heating, in summer - cooling the premises.
- Supra - used in networks of cold water supply, cooling (industrial production, swimming pools, hotels). To ensure frost resistance during water transportation, it is equipped with an additional thermal electric cable. The manufacturer focused on reducing the financial costs of installation by connecting a working PE pipe using electrically resistant, compression fittings.
- Supra plus is the best solution for frost-resistant cold water supply thanks to the heating of the pipes in places where frost is possible. Implemented the possibility of laying directly on the snow cover. Supply pipes made of PE80 are connected using threaded, electrically resistant fittings provided that they are compatible with pipes PE 80, PE100.
- Aqua - available in 2 variations - Twin, Single. Twin is distinguished by the presence of a second circulation pipe. If necessary, the system is additionally equipped with a thermal electric cable. Ease of installation is ensured by laying in a trench up to 40 cm deep - the method is not inferior in terms of durability to deep laying.
Modern solutions for local heat distribution
|
For pumping hot water in heating networks, Uponor heat-insulated pipes are used, made of cross-linked polyethylene of the PE-Xa brand and covered with a heat-insulating layer of foamed polyethylene. Since recently the issues of saving thermal energy have been raised very sharply, it is the heat-insulated pipes of Uponor that allow solving the problem of economical local heat distribution with maximum efficiency. The use of such heat-insulated pipes makes it possible to carry out very long routes with virtually no losses, since the pipes are produced in large lengths, up to 200 meters, and the laying of the main line can be performed without joints. It is possible to mount such pipes conveniently and simply, since no construction equipment is required for this. Plastic pipelines, unlike metal ones, are not afraid of the phenomenon of corrosion, and, therefore, are able to last much longer. In one heat-insulating casing, not only one pipe for pumping liquid can pass, but also two or even four - it all depends on the specific tasks of the heating main. |
There are also designs inside which a heating cable is provided, which allows water supply in winter without fear of defrosting.
Uponor offers Uponor Ecoflex thermally insulated pipes, which exactly meet all modern requirements for reliability, efficiency, strength and safety of pipelines. These pipes can be used not only for heating networks, but also for cooling networks. The purposes of their use are very wide. These can be supply lines to residential buildings, central heating and central cooling systems, industrial plants producing biogas and other bioenergy facilities. Any network is mounted quickly and efficiently, even if the working conditions are very difficult.
Installation of Uponor thermally insulated pipes
Uponor Ecoflex pipes are widely recognized as reliable, innovative systems that are flexible and highly cost-effective. With their help, transportation of various liquids within buildings and outside is organized. The system includes a complete set of devices for providing water supply for domestic and drinking purposes. The material of the pipes guarantees a long service life, and thanks to their low weight and high flexibility, the pipes are easy to install, even avoiding obstacles and rounding corners if necessary.
Advantages of Uponor pipes with thermal insulation:
- there is no need for welding, an expensive and fire hazardous procedure;
- when installing this type of pipe, no additional costs are required;
- due to the low weight of the pipes, special equipment is not required for their transportation and installation;
- increased pipe flexibility simplifies and speeds up installation work;
- no need for power tools simplifies installation;
- during the entire period of operation, the thermal insulation absorbs little water (less than 1%).
Uponor Thermal Insulated Pipes are flexible, pre-insulated pipes that have proven themselves as pipelines for heating and water supply, in the design and construction of all types of industrial and residential buildings. in the Russian and world market.
Application of Uponor Ecoflex thermally insulated pipes
Uponor thermally insulated pipes are used for outdoor local heating networks (hot water supply, heating networks and process networks), which in turn transport hot water with a temperature of up to 95 ° C and a pressure of up to 1.0 MPa, as well as in outdoor networks of cold supply, cold water supply and sanitation. Uponor thermally insulated pipes have a fairly high application rate, which is due to the special chemical properties of the materials from which the Uponor thermally insulated pipes are made, such as: - Thermo, Aqua, Quattro and Supra:
Thermally insulated pipes Uponor Ecoflex Thermo
Uponor Thermo pipes are designed to maintain the temperature of the conveying water to the heating system. It is produced in single and double version Thermo Twin which has 2 pipes, supply and return. Uponor Thermo thermally insulated pipe is manufactured in a single protective casing.
Thermally insulated pipes Uponor Ecoflex Aqua
Uponor Aqua pipes are designed to maintain the temperature of the water transported to the hot water supply system. Uponor Aqua thermally insulated pipes are available in single and double version Aqua Twin which has a specially built-in circulation pipe.
Thermally insulated pipes Uponor Ecoflex Quattro
Uponor Quattro pipes are a four-in-one solution. Uponor Quattro thermally insulated pipes are designed to transport water entering heating and hot water systems. Uponor Quattro pipes are the ideal and most efficient solution for connecting all types of freestanding buildings.
Thermally insulated pipes Uponor Supra
Uponor Supra pipes are manufactured to solve the problem of transporting cold potable water, cooling water or waste water. Uponor Supra thermally insulated pipes have an integrated heating cable to protect the water from freezing.
Designheat-insulating pipes
1. Special HDPE protective shell: impact-resistant, strong and flexible, achieved through the use of corrugated geometries with stiffening ribs.
2. The insulation is made of closed-cell PE-X foam, which fully guarantees the perfect insulating properties of Uponor thermal insulation pipes, excellent aging resistance, moisture-proof, high flexibility and lightness of the pipeline.
3. The use of the “Dog Bone” method (red-blue core), thanks to which any errors in determining the transported medium between the return and supply pipes are effectively prevented.
4. Uponor heat-insulating pipes for transporting media are made of PE-Xa material, which has several advantages: resistance to high temperatures, the formation of all kinds of deposits and various cracks under the action of the pressure of the transport fluid.
Benefits for installation and pipe connections.
- Installation of Uponor thermal insulation pipes in corners and in the presence of various obstacles.
- Installation of Uponor thermal insulation pipes in coils up to 200 m long without any additional connections and connections.
- The self-compensating design of Uponor Insulation Pipes makes it possible to completely eliminate the need for L-shaped and U-shaped expansion joints.
- Minimum installation time for Uponor thermal insulation pipes on site (small financial installation costs).
- A reliable and safe connection method for Uponor thermal insulation pipes, which includes the subsequent insulation of pipe joints and connectors.
The waterproof and completely non-corrosive design makes the Uponor ECOFLEX system reliable and durable. This means that for many decades you will forget about the need for costly work to replace and repair pipelines. Uponor ecoflex is a modern thermally insulated pipeline for supplying cold and hot water (heating and water supply), as well as a coolant to a house, garage, sauna, etc.
In the most severe frosts in your house will always be warm and comfortable. This was taken care of by the engineers who created the non-freezing heat-insulated Ecoflex pipeline from anti-corrosion materials and equipped it with an electric cable and high-quality Uponor Ecoflex thermal insulation, thanks to which heat does not escape through the pipe walls into the ground, but creates comfort and coziness in your home. Uponor ECOFLEX pipelines are not only a modern and prestigious, but also a cost-effective solution. Your faucet will have clean, rust-free water without interruption. The savings in the use of Uponor Ecoflex thermally insulated pipes are achieved due to its quality, durability and reliability.
Products in our catalog:
For more information and samples, please call or visit our office!
Thermally insulated pipes Uponor Ecoflex Aqua (uponor ecoflex aqua - water supply)
Uponor Ecoflex Aqua pre-insulated pipes consist of a one-pipe and two-pipe system. Maximum temperature of falling pipes: 95°C, operating pressure: 10 bar. Uponor Ecoflex Aqua piping consists of one or two supply pipes made of Uponor Pex XLPE (Wirsbo), closed-cell thermal insulation made of Uponor Pex PE foam (Wirsbo), and a high-density polyethylene corrugated protective casing. The range of Uponor Ecoflex Aqua includes pipes and accessories for outdoor hot water networks. The service life of Uponor Ecoflex pipes is 50 years, with continuous operation at operating temperature.
Thermally insulated pipe Uponor Ecoflex Thermo (uponor ecoflex thermo - heating)
Uponor Ecoflex Thermo pre-insulated pipes consist of a one-pipe or two-pipe system. Maximum temperature of falling pipes: 95°C, operating pressure 6 bar. Uponor Ecoflex Thermo piping includes pipes and fittings for heating systems. Uponor Ecoflex Thermo piping consists of one or two pipes (T1, T2) made of Uponor Uponor cross-linked polyethylene (Wirsbo) with an eval oxygen-barrier layer, thermal insulation with closed cells made of Uponor Rex polyethylene foam, and a protective corrugated casing made of high density polyethylene (heating). The service life of Uponor Ecoflex pipes is 50 years, with continuous operation at operating temperature.
Preinsulated pipes Uponor Ecoflex Quattro (uponor ecoflex quattro)
The thermally insulated pipes of the Uponor Ecoflex Quattro series consist of four pipes made of Uponor Rex cross-linked polyethylene (Wirsbo), two of which are designed for heating - with an eval oxygen-barrier layer, thermal insulation with closed cells made of Uponor Pex (Wirsbo) polyethylene foam, and a protective corrugated casing made of high density polyethylene. Pmax.work 10 bar. Maximum operating parameters for heating pipes: Tmax.work +95°C, Pmax.work 6 bar; for DHW pipes: Tmax.work +95°С. Pipelines of Uponor Ecoflex Quattro combine pipes for heating (T1, T2) and hot water supply (TK, T4).
Thermally insulated pipes Uponor Ecoflex Supra Plus (uponor ecoflex supraplus)
The Ecoflex Supra Plus range includes pipes and accessories for cold water supply systems. The Uponor Ecoflex Supra Plus pipeline consists of Uponor Pex (Wirsbo) and Uponor Pex pipes (for diameters 75.90 and 110 mm), a heating self-regulating cable, a guide tube made of Uponor polyethylene Pex (Wirsbo) adjacent to the supply pipe and designed to accommodate a temperature sensor, Ononor Pex (Wirsbo) closed-cell polyethylene foam insulation (thermal insulated pipes), and a protective corrugated high-density polyethylene casing. Working parameters: Trab. +20°С, PN 10 bar. The maximum specific power of the heating cable is 10 W/m.
Thermally insulated pipe Uponor Supra Ecoflex Standard
The range of Uponor Ecoflex Supra Standard includes pipes and accessories for cold water supply systems. Uponor Ecoflex Supra Standard piping consists of Uponor REM and Uponor REN pipes (for diameters 75, 90 and 110mm), heating cable, control equipment, temperature sensor, Uponor Pex (Wirsbo) closed-cell polyethylene foam insulation, and a protective corrugated casing made of high density polyethylene. density. Working parameters: Trab. +20°С, PN 10 bar. The maximum specific power of the heating cable is 25 W/m.
Description of Uponor Ecoflex insulated pipes
Uponor Thermal Insulated Pipes are flexible, pre-insulated pipes that have proven themselves as pipelines for heating and water supply, in the design and construction of all types of industrial and residential buildings. in the Russian and world market.
Application of Uponor Ecoflex thermally insulated pipes
Uponor thermally insulated pipes are used for outdoor local heating networks (hot water supply, heating networks and process networks), which in turn transport hot water with a temperature of up to 95 ° C and a pressure of up to 1.0 MPa, as well as in outdoor networks of cold supply, cold water supply and sanitation. Uponor thermally insulated pipes have a fairly high application rate, which is due to the special chemical properties of the materials from which the Uponor thermally insulated pipes are made, such as: - Thermo, Aqua, Quattro and Supra:
Uponor Thermo pipes are designed to maintain the temperature of the conveying water to the heating system. It is produced in single and double version Thermo Twin which has 2 pipes, supply and return. Uponor Thermo thermally insulated pipe is manufactured in a single protective casing.
Uponor Aqua pipes are designed to maintain the temperature of the water transported to the hot water supply system. Uponor Aqua thermally insulated pipes are available in single and double version Aqua Twin which has a specially built-in circulation pipe.
Uponor Quattro pipes are a four-in-one solution. Uponor Quattro thermally insulated pipes are designed to transport water entering heating and hot water systems. Uponor Quattro pipes are the ideal and most efficient solution for connecting all types of freestanding buildings.
Uponor Supra pipes are manufactured to solve the problem of transporting cold potable water, cooling water or waste water. Uponor Supra thermally insulated pipes have an integrated heating cable to protect the water from freezing.
Designheat-insulating pipesUponor Ecoflex
1. Special HDPE protective shell: impact-resistant, strong and flexible, achieved through the use of corrugated geometries with stiffening ribs.
2. The insulation is made of closed-cell PE-X foam, which fully guarantees the perfect insulating properties of Uponor thermal insulation pipes, excellent aging resistance, moisture-proof, high flexibility and lightness of the pipeline.
3. The use of the “Dog Bone” method (red-blue core), thanks to which any errors in determining the transported medium between the return and supply pipes are effectively prevented.
4. Uponor heat-insulating pipes for transporting media are made of PE-Xa material, which has several advantages: resistance to high temperatures, the formation of all kinds of deposits and various cracks under the action of the pressure of the transport fluid.
Benefits for installation and pipe connectionsUponor Ecoflex
- Installation of Uponor thermal insulation pipes in corners and in the presence of various obstacles.
- Installation of Uponor thermal insulation pipes in coils up to 200 m long without any additional connections and connections.
- The self-compensating design of Uponor Insulation Pipes makes it possible to completely eliminate the need for L-shaped and U-shaped expansion joints.
- Minimum installation time for Uponor thermal insulation pipes on site (small financial installation costs).
- A reliable and safe connection method for Uponor thermal insulation pipes, which includes the subsequent insulation of pipe joints and connectors.
