Acrylic bathtubs have recently become popular and have taken the place of the previously widely used cast-iron structures. Such a product captivates with its lightness, as well as its sophisticated forms. But at the same time, quite often the owners of such plumbing do not know how to clean an acrylic bathtub so as not to harm its appearance.
What is acrylic?
For the manufacture of acrylic bathtubs, plastic is used, which is characterized by significant hardness and wear resistance. The surface of such products has a dirt-repellent effect, which prevents the development of harmful microorganisms. This material has been widely used in the field of dentistry in the past. Thanks to new technologies, its price has dropped significantly. Therefore, the material began to be actively used in the production of sanitary ware.
Acrylic bathtubs are resistant to impact, but are subject to small and minor scratches. Their high-quality cleaning depends not only on which cleaning agent was chosen, but also on compliance with the basic recommendations for the care of acrylic. In order for the bath to serve for a long time and not lose its whiteness and integrity, you should not bathe pets in it, as well as arrange a warehouse of basins and buckets. Metal objects and other utensils can damage its surface, leaving visible scratches.
Acrylic Bathtub Daily Care
Acrylic bathtub does not require special care. It is enough to rinse it after each use with clean running water, without using aggressive cleaning agents. For acrylic baths, you can purchase special "chemistry". Of course, they also effectively fight pollution, but they are not cheap. In addition, it is not recommended to constantly expose the acrylic surface to chemical cleaning.
Many do not know how to clean an acrylic bath. It turns out that to carry out such cleaning, it is enough to purchase a soft cloth or sponge. It is also necessary to use soap or a special detergent for acrylic products. For daily care, it is enough to clean the surface of the bathtub with a soapy sponge to remove possible contamination. You can even just rinse it with clean running water and completely remove moisture. With such care, no traces of rust or plaque will appear on the surface.
If such pollution nevertheless takes place, then how to clean the acrylic bath in this case? If the usual methods do not help, you need to choose special cleaning products.
What care products to use?
Before we tell you how to clean an acrylic bath at home, we note that you need to remember some important rules. It is important to observe accuracy and discretion in the process of processing the product. Avoid using cleaners that contain abrasive elements, as well as pastes and powders with the presence of ammonia compounds, chlorine, alkali and acid. You need to be aware that such substances can damage the outer coating of the acrylic tank, cause small cracks and scratches, and provoke discoloration. Therefore, before deciding how to clean an acrylic bath, you should carefully read the composition of the powder or paste. Avoid using metal brushes. Cleaning tools that are too hard cause scratches and damage the finish.
Overview of cleaning products
Every hostess thinks about how to clean an acrylic bath. Luckily, there are a lot of special tools out there. "Acrilan" - cleaning foam that easily removes various types of dirt (soap stains, limescale, rust). The tool can easily cope with all types of stains. The advantage of this product is the formation of a protective film on the acrylic surface, which prevents further accumulation of plaque. But never leave the foam to dry completely on the surface of acrylic products, and do not mix it with other products. Use gloves during cleaning. Keep away from children.
Cif is the optimal cleaning agent that is suitable for the care of all plumbing fixtures. The composition does not contain abrasive substances. Therefore, the acrylic surface is not threatened by the loss of gloss and integrity. The tool is available in several forms - cream, paste, spray.
Bass is a liquid for cleaning sanitary ware in the bathroom. Suitable for daily use.
Tim-Profi is a detergent designed for cleaning acrylic surfaces. Among the main advantages are environmental friendliness, the ability to destroy unpleasant odors, and the removal of significant contaminants. The agent gives the cleaned surface shine, and also forms a special protective layer.
"Cinderella" is an effective preparation for cleaning acrylic products. An ideal option for those who cannot decide how to clean an acrylic bath. Among the shortcomings is a pungent odor that appears directly upon spraying. In the process of processing, it is recommended to use not only gloves, but also a mask. The product must be sprayed onto the surface of the acrylic bath and left for 7 minutes. After the specified time, rinse the preparation with running water, wipe the bath with a soft cloth.
"Chister" - a cleaner for acrylic baths, which is also suitable for other plumbing items. Ideally removes limescale, rust, grease stains and soap stains, gently cleans the surface without causing mechanical damage. The composition of the drug includes an acrylic polymer, which acts as a barrier to further adhesion of dirt to the bath. The product protects against the appearance of fungi and bacteria. The bath will please the owners with cleanliness in a couple of minutes.
So, we discussed how to clean an acrylic bath. Let's talk about possible ways to use detergents. Familiarize yourself with the basic rules for using cleansers. Usually the manufacturer places recommendations directly on the packaging. The basic rules of application are as follows:
Folk remedies for the care of acrylic bathtubs
If there are no detergents, and you don’t know how to clean an acrylic bath at home, feel free to trust people’s advice. Such funds do not have negative properties and do not harm health:
What do the owners of this kind of plumbing say? How to clean an acrylic bath? Reviews on this subject are very different. However, regardless of whether you read a positive or negative comment, you should know that all products correspond to the qualities declared by the manufacturer. It is important to choose the optimal detergent that is suitable for your bath, taking into account the characteristics and characteristics of the water. The effectiveness of the tool depends on the frequency of use. For example, with heavy contamination, it may be necessary to use the product twice to achieve a perfectly clean surface. Taking into account all the above information, you can easily determine which means to clean the acrylic bath so that the product lasts a long time.
Often, housewives are faced with the problem of how to wash an acrylic bath at home? The walls and bottom are sensitive to abrasive substances, so a product chosen at random will not work. The purpose of the article is to talk about the basic rules and methods of cleaning, to give practical advice and recommendations:
- characteristics of cleaning products, their features;
- cleaning options - what are the main differences;
- Tips for taking care of and extending the life of your bathtub.
What you need to know about the characteristics of acrylic bathtubs before cleaning them?
Before answering the question of how and how to wash an acrylic bath, let's talk about the material of manufacture. Acrylic has a dirt-repellent effect: microorganisms, bacteria and fungi do not develop in the bath. The material is durable and impact resistant. A noticeable minus is that it is easily scratched and subject to wear.
The main difference is exposure to abrasive and chemically active components. Like plastic, substances with high alkalinity or acidity lead to degradation of the structure, and abrasives scratch the surface, leaving deep grooves.
When washing, it is important to be careful. Do not buy abrasive compounds, pastes with ammonia, chlorine, acids and alkalis. Powdered products are harmful, leaving damage and scratches. Brushes (metal and hard bristles) are contraindicated for use.
Which brushes and sponges to use
For cleaning use soft cloths or sponges. Use and tissue napkins. They are moistened in special solutions (we will talk about them later). After washing, it is wiped dry and polished.
If there is no opportunity to buy a special sponge, use rags with soft pile, for example, from microfiber. If necessary, use a regular cloth - the main thing is that there are no abrasive agents on the surface.
How to clean an acrylic bath at home: TOP 5 ways
For you, we have selected several options for how to clean an acrylic bath at home:
- detergent;
- lemon acid solution;
- vinegar;
- soda;
- toothpaste.
Detergents
An adequate and simple way is the use of special detergents. Their cost rarely exceeds reasonable limits. For proper selection, make sure that there are no abrasives. Often on the packaging of goods indicate the composition, or make special notes.
Acrylic bath cleaner used for small and large cleaning volumes. Spots that appear are removed with:
- cif- for baths, sinks, tiles and toilets. The composition does not contain abrasives, which is safe for acrylic. An acceptable price and a variety of types of composition (spray, paste, cream) make it a popular product among buyers. After cleaning, a film appears that protects it from further formation of limescale.
- Acrylan- foam for bathtubs and showers. When using, leave only until completely dry, without rinsing.
- Bass- Cleaning agent, used daily. Sold in liquid form.
- Team Pro- an environmentally friendly product, helps to fight unpleasant odors, is effective for severe pollution.
- Cinderella- a popular substance, emits a pungent odor, therefore, when spraying (sold as a spray), wear gloves and a special mask.
- Chister- composition for quick removal of dirt, promotes the decomposition of divorces and fatty contaminants. Consists of a polymer that protects against fungi.
In addition to those listed, allowed Use of the following is at your own risk:
- Sarma;
- SanClean;
- Luxus professional;
- L. O. C. Plus;
- Cillit;
- Acryl-Net;
- Star-Acrylat;
- Triton;
- RAVA K;
- Panny.
Citric acid solution
Citric acid refers to organic acids with a relatively high pH - an indicator of the solution. Materials perfectly clean off plaque, grease and other contaminants. Organic acid is especially effective on ordinary substances, therefore it is easy to clean off fat with its help. In its pure form, it adversely affects acrylic, because mix into solution:
- ⅔ fill with warm water;
- Pour out half a liter of acid;
- Stir the consistency and leave overnight;
The method is effective, but aggressive towards acrylic, and it is not recommended to carry it out more often than 0.5 years. After standing for about 12 hours, the solution descends. It is worth stirring citric acid more thoroughly than vinegar - completely dissolve it for further precipitation. At the end, the structure is washed with a stream of water from the shower and wiped with a soft cloth. Rub for extra shine.
Apple vinegar
A practical substance, but it does not always have a positive effect on acrylic. The main feature is a low pH and high acidity. For the material, this factor is critical, especially in the presence of scratches. You must work quickly and accurately. The recommended method is to moisten a cloth abundantly in the solution, attach it to the pollution and pour water over it.
We recommend using the method at least once every six months. For severe pollution:
- Prepare 9% vinegar in an amount of 1 liter;
- Fill two-thirds with hot water;
- Pour out the vinegar;
- Wait for the night;
- Rinse and wipe
Soda
Plaque removes ordinary soda. The composition has a high alkaline environment that breaks down fats and strong compounds. In most products, it is present in the form of compounds or in the usual form. There are two types: food and calcined.
Use the method every 3-5 months. Baking soda is a weak alkali, soda ash is strong, with a powerful abrasive effect. Use only baking soda.
- Pour 2-3 tablespoons of baking soda into a bowl;
- Fill with a glass of water;
- Dampen the soft side of the sponge with the solution;
- Apply the mixture by blotting rather than rubbing;
- Rinse with water after 15 minutes and clean with a cloth.
Never use undiluted baking soda! It has a strong abrasive effect and will damage the case.
If you need to leave the surface in its original form, take distilled or filtered water. In some cities, tap water contains a large amount of calcium, which reacts with soda, which forms fine crumbs, similar to sand. Using water will get rid of it. The advice is also relevant for other cleaning methods associated with the use of chemically active substances.
Toothpaste
Acrylic came to plumbing from dentistry - it was used to line denture frames and make crowns, so cleaning the bathtub with toothpaste is quite acceptable.
The procedure should not be carried out more than once every two months. Buy non-abrasive paste. The manufacturer may not indicate this on the packaging. Abrasive particles are like small grains of sand that clean plaque from teeth, but they will greatly damage the surface of the bath. Before use, squeeze a small amount of paste onto your finger and rub it - the sand is immediately noticeable.
- Apply the paste to a sponge or cloth;
- Wipe dirty surface;
- Clean with water;
- Grate to shine
Video: how to wash an acrylic bath
The video below provides detailed tips on how to wash an acrylic bath.
Consider the main ways to clean an acrylic bath:
Contraindications: what not to use when cleaning
A few words about how you can not clean an acrylic bath at home. We do not recommend using:
- Acetone- corrodes plastic, contributes to the appearance of holes.
- Abrasives- spoil the surface, leaving scratches and reducing the thickness of the enamel.
- A mixture of several components- creates the opposite effect, scratching the walls.
The appearance of acetone in the room should be completely excluded. The element is chemically active and acts as a solvent. Enough 10-20 ml for a dent on the surface of the structure.
Rinse off chemicals with cold water. High temperature increases the rate of reaction and damage to the surface will occur more quickly.
Detergent compatibility with acrylic surface
Is it possible to wash an acrylic bathtub with domestos or a mixture of substances? It is undesirable to mix with:
- Formaldehyde- they are not compatible with acrylic.
- Chlorine- its use forms pores, shortening the life of the product.
- Acetone, ammonia- corrode the walls.
Domestos, Sanox, Pemolux and Selit contain hydrochloric acid that destroys protection. Initially, it is bleached, but after it absorbs plaque, it gets dirty faster. Therefore, such detergents cannot be used.
White disinfection
An acrylic bath is a way to forget about the fungus forever, but it is not perfect either. The fungus does not appear on the material, but easily multiplies on plaque, fats and other organic substances with nutritious microflora. It is necessary to prevent the long appearance of pollution, and if they appear, periodically carry out a complete disinfection.
Fill the tub with water at room temperature;
- Add 2 liters of whiteness (7%);
- Do not touch for 10-15 minutes;
- Rinse off the water and dial again;
- Remove the remaining whiteness and drain the water;
- Wipe dry with a cloth.
Rules for proper operation
The bath does not require serious maintenance, but it is still necessary to follow the rules.
- Periodic bringing plumbing in a decent condition in 5 minutes - after water procedures rinse with clean water. Acrylic does not absorb dirt, so this washing is enough.
- Wipe down bath after use sponge with soapy water. Then dry to avoid streaks.
- To remove scratches, there are restoration kits- They are sold in hardware stores.
To properly care for an acrylic bath, you need to purchase soft sponges and microfiber cloths. Also, when cleaning, it is necessary to use special products that will not harm the acrylic surface, which quite specifically perceives the effects of aggressive chemicals. Find out more about cleaning such a bathtub below.
Purchased cleaning products
For acrylic baths, detergents can be especially dangerous if they contain concentrated alkalis and acids, chlorine, ammonia. These substances can change the color of the bathtub, contribute to the appearance of small cracks and scratches, and roughen a smooth surface. Therefore, it is very important to choose the right cleaning agent:- Acrylan. Foam is recommended as a detergent. With its help, you can remove various contaminants in the form of rust and limescale. The contaminated surface is wiped with a sponge, on which foam is applied, and after 10 minutes from the moment of treatment, it is washed off with water.
The foam creates a thin protective layer that prevents dirt from settling on the surface of the tub.
- Sif, Vass. They are considered the most versatile means for gentle cleaning of plumbing surfaces, including acrylic bathtubs. They do not contain substances that can damage its surface. After cleaning with these products, the bath will shine with brilliance and whiteness, if there are no old dirt.
- Cinderella. It is recommended to wear rubber gloves and a mask when using the product, as an unpleasant odor is emitted when spraying. It should be kept on the surface for about 7-10 minutes. Then rinse with a shower and wipe with a sponge or microfiber cloth.
- Chister. Its advantage is that it contains an acrylic polymer. When processing the surface, it covers it like a film, repelling various types of contaminants, and the bath will shine with brilliance and whiteness for a long time. It will not accumulate bacteria and fungi. A surface treatment of 5 minutes is sufficient.
- Team Pro. A special product for acrylic baths, which not only gently cleans various types of dirt, but also eliminates odors, and also creates a reliable protective layer against other dirt.
- Bon Professional. It is a reliable cleaner for plastic products. It is applied to a cloth and wiped the surface of the bath. It is recommended to wait a few minutes and rinse thoroughly with clean water. It forms a special film that protects the surface from contamination for a long time.
In addition, if there is no special product at home, you can use dishwashing gels, as well as washing powder, previously dissolved in water.
Can Domestos be used?
Many housewives are interested in the question of the possibility of cleaning a plastic bath with Domestos. This tool is not allowed to be used. Although it will contain hydrochloric acid, it does not damage the acrylic surface. Perfectly removes plaque and rust.But before proceeding with the treatment of the bath with this remedy, you need to know how this is done:
- First, moisten a soft sponge with the composition and wipe the bath.
- Wait about 1 minute and wash off the composition with plenty of water.
- Wipe the surface dry.
In addition to cleaning the surface, Domestos reliably disinfects it and creates a protective layer.
Homemade Acrylic Bathtub Cleaners
They do not cause allergies and do not require separate material costs:- Lemon acid. For cleaning, the bath is filled with warm water, to which 10 g of acid is added. Water is not drained for about 2-12 hours. After the time has elapsed, the water is drained, and the surface is rinsed with running water. Residual moisture is removed with a soft cloth.
- Toothpaste. In the event of various kinds of stains, use toothpaste. It is applied to a sponge and the stain is rubbed, slightly pressing on it.
- Baking soda. If it is necessary to remove rust or limescale, use a slurry of baking soda. The surface is treated with it and after a while it is washed off with warm water.
Ways to remove yellowness from an acrylic bath
Yellowness from the surface of an acrylic bath can be removed in the following ways:- For gentle bleaching of acrylic baths, it is recommended to mix in equal proportions ammonia and hydrogen peroxide. With this composition, it is necessary to wipe the baths using a delicate cloth.
- Use in equal amounts lemon juice and vinegar. They are mixed and applied to the surface with a sponge.
- Apply laundry bleach. To do this, the powder is diluted with water to make a slurry, and applied to the spots. Leave until the slurry dries, then rinse with clean water and wipe with a rag.
- Finish the surface of the bath apple cider vinegar then rinse with water.
Removing limescale from an acrylic bath
The bath has constant contact with tap water. Over time, salts can settle on its surface, forming a gray coating. In the same form, fat particles are deposited, which we wash off during bathing from the skin, if after bathing the bath was poorly washed off. Due to such a coating, the bath loses its luster and whiteness, and the surface becomes rough.
It is necessary to choose products that will effectively remove plaque without damaging its surface. These liquids and creams include: Sanfor, Gel WC 5+, RAVAK Turbocleaner. They gently affect the surface without damaging it.
So that the plaque does not have time to stagnate, it is necessary to clean the bath with these products at least 2 times a month. If measures are not taken in time, then over time a thin hard film will thicken. Each time it will be more and more difficult to remove it from the surface of the acrylic bath.
The advantage of these products is that there is no need to rub the surface, but only need to process it, wait a few minutes and rinse with running water.
We remove strong plaque and "water stone"
If the bathroom has not been looked after for a long time, plaque may form, which will be difficult to remove. However, there is a tool that can cope with such a raid:- Take cleaning powder for dishes or laundry, dilute with water and mix until a slurry.
- Add 2 tbsp. l. whiteness and 1 tbsp. l. vinegar.
Video: How to wash an acrylic bath?
The following video offers tips on how to properly wash an acrylic bathtub, and also tests how to clean it with toothpaste and a special solution:So, taking care of an acrylic bathtub is not such a difficult task, if you do not bring the condition to a critical one, allowing the formation of thick limescale and rust. As soon as the smallest stains or dirt are noticed, they must be removed immediately using special formulations. Then an acrylic bathtub will delight you with shine and cleanliness for a long time.
The bath is often exposed to various pollution. In addition to the untidy appearance of plumbing, rust, limescale can become a source of a large number of bacteria, as well as the cause of an unpleasant odor. Traces are left by children's toys, shampoos and other products left on the sides.
Therefore, many housewives are interested in the question of how to clean the bath at home. Today, fortunately, household chemical stores can please us with an abundance of various detergents that will not only help wash a dirty bath from plaque, but also remove rust and other contaminants.
Before you start looking for a way to help wash the bath to white, you need to figure it out with the causes of stains and other stains.
- Soap stain. The result of using various shampoos, bath products and ordinary soap is the appearance of a film on the surface of the water in the bathroom. It is not always possible to remove it with a simple rinse. This film eats into the surface of plumbing, and it is already impossible to do without detergents.
- lime plaque formed from water of high hardness. This is the most common bathroom problem.
- rust caused by tap water with a high iron content.
- If the bath turned yellow, the reason for this was the old pipes, which are not always well washed.
- usually accumulates on tile joints between parts, on window slopes, on the ceiling. This fungus is very dangerous to health, therefore.
- colored spots may result from careless handling, spilled or spilled potassium permanganate solution, brilliant green and other substances.
- Pollution from ongoing repairs. The bath is very prone to various stains, dust easily sits on it. Therefore, when carrying out repair work, it must be protected with a film or other materials.
In the old bathtub, the enamel is all cracked, into which any dirt easily penetrates.
Main types of pollution
To clean the bath from rust at home will help the following means.
- Ammonium chloride. It is applied to the spots for a few minutes and washed off with water.
- Lemon juice. The method is the same as with ammonia.
- Cooking surface treatment salt and table vinegar.
Rust can also be cleaned with soda ash (sodium carbonate). It is sold in any household chemical stores. The procedure will be as follows.
- Mix two types of soda (calcined and food) in equal proportions.
- Add water to obtain a homogeneous mushy consistency.
- Sponge or brush evenly distribute the composition over the surface of the product.
- Table vinegar and bleach in powder granules are also combined in equal amounts.
- Apply this mixture to baking soda.
- Wait 30 minutes and rinse well with clean water.
Rust can also be treated with alcohol and hydrogen peroxide. These components are mixed in the following proportion: one part of alcohol and two parts of peroxide. The sponge is dipped in the solution and all dirty areas are covered with liquid. Washed with water after 20 minutes. Here's how alcohol and peroxide can clean up rust without leaving a trace.
limescale
It is washed off if you clean the bath soda and vinegar.
- Mix baking soda with soda ash, apply to the surface of the product, leave for 30 minutes. After that, rub a little and rinse with water.
- Paper towels are moistened in vinegar, which cover the entire inner surface of the bath. After 5 hours, the towels are removed, and the product is washed with water.
How else can you wash the bath from yellow plaque? Help out citric acid. 100 g of the product is dissolved in 400 ml of water. All yellow areas on the bathroom are covered with this product with a sponge.
Within two hours, the coating is repeated at intervals of 10-15 minutes. Then rinse well with water. The procedure is quite tedious, but it will perfectly help to wash the bath from yellowness.
It often forms in places where the bathroom is adjacent to the wall. It can be cleaned with activated carbon. Coal is mixed with whiteness to a mushy consistency and the composition is distributed over the mold fungus. Wash off with water after an hour.
Another effective way is using soda. How to clean the bath with baking soda from mold? Very simple. It is applied to the problem area in a rather thick layer, then poured abundantly with table vinegar. After the end of the reaction, everything is thoroughly washed off with water.
Ways for different types of baths
How to wash an acrylic bath?
An acrylic bathtub requires careful, gentle handling and the same cleansing. Care should become regular, consisting in rinsing after each use of the product using gentle means.
It is forbidden to use:
- products containing alkalis and acids. They are detrimental to acrylic;
- solutions containing alcohol;
- bleaches with chlorine and other products containing this substance.
Wash an acrylic bathtub from limescale with a weak solution of washing powder. If the surface of the product is not damaged, then this method will perfectly cope with the task.
An acrylic bath at home is washed from rust and other deposits with table vinegar (which is preheated) and salt. An alternative would be a mixture of the same table salt and turpentine. The same products will help wash the acrylic bath from yellowness.
Because this cleaning method is quite aggressive, test it on an inconspicuous area before cleaning your acrylic bathtub with it. Otherwise, plumbing may deteriorate.
An enamel bath has a top layer that is quite thin. Therefore, in this case, all methods of rough cleaning are contraindicated. At home, you can use hydrogen peroxide, ammonia, proven soda and vinegar.
Rust is removed with porridge from water and soda, which is applied to the stain, kept for about one hour and washed off well with water. Whiten the surface of soda ash with the addition of food. Limescale will remove ammonia and fresh lemon juice.
You can also clean the enamelled bath with mustard. It will not only wash off dirt, but also disinfect the surface with high quality.
How to clean an old cast iron bath?
Such plumbing products are characteristic of old houses. The technology for the production of cast-iron bathtubs was based on the addition of zirconium salts to the material from which they were made. It is because of them that yellowed spots form after contact with water.
Wash the cast-iron bath from yellowness with table vinegar. Pour a full bath of water and add 200 ml of essence to it. Leave for 3-4 hours, rinse well with water. This versatile cleaning liquid has repeatedly helped housewives in different situations, making ordinary household cleaning more efficient and effective.
A good method based on soda and liquid soap will help to wash the rust off the bathtub. From these components, a slurry is prepared, which is rubbed with rust and its streaks.
Ammonia will help out from very old stains. It should be added to 0.5 cups of liquid soap and spread over the surface of the bathroom. After this procedure, the bath will become shiny again. If you know how to clean an ancient cast-iron bath, you won’t have to change the product for a new one, and it will last more than one year.
Removal of other types of contaminants
These two components are the most common types of pollution in the bathroom. Even a weakly concentrated solution of manganese will leave dark marks on the surface of the product.
A drop of brilliant green solution will also add color.
Manganese is washed with a solution of hydrogen peroxide and lemon (or fresh lemon juice), they will not only quickly discolor the stains that have appeared, but will make the bath shine.
We remove the greenery with alcohol. However, if the surface of the plumbing is made of acrylic, then alcohol may be powerless before contamination.
How to wash the bath after repair?
In order not to have to deal with its consequences on a soiled bathroom upon completion of the repair work, the product must be protected from building materials. If something goes wrong, you can use by the following means.
- Any solvent (for example, white spirit) will help to wash the bath of paint. It is important to work quickly so that the paint does not have time to soak into the surface.
- Rinse off dusty deposits with warm water, then clean with citric acid.
How to wash the sealant from the bath?
Sealant is another type of bathroom contaminant. It is used to ensure the reliability of joints and seams. Sooner or later the question arises.
In this case, you can use folk methods using table salt, but it is better to buy professional products specifically for such cases.
How to clean an old bath?
If the bath is far from being the first year, then pollution appears on it very quickly. They penetrate into all microcracks that have formed on the surface over time.
Not all cleansers can easily restore its original appearance. Better, of course, to replace the plumbing. But if this is not possible, then soda ash will help. The procedure for working with it was described above.
Cleaning chrome surfaces
Faucets above the bath, shower hoses require no less attention than the plumbing product itself. Limescale and rust also appear there - the first enemies of bathrooms. Faucets, handles on the bathroom and other elements are covered with chrome.
From the chrome surface, the universal baking soda, which is applied to the products, will clean the rust. You can also use table vinegar or tooth powder. All components are evenly distributed over the objects with a sponge or soft cloth. The chrome parts are kept in this state for about half an hour, then washed with water.
There are many ways to answer the question of how to wash the bath from various contaminants. Follow the above rules and recommendations, and your bath will shine. But it’s better not to wait for a general cleaning, but to take care of the product regularly, then you won’t have to waste time and effort on removing significant old stains.
Acrylic bathtubs are gaining more and more popularity, because due to its unique structure this material does not accumulate pollution. The minimum number of pores in the polymer makes it easy to remove fresh stains, and the smooth surface creates a barrier to the accumulation of germs and dirt. However, acrylic bathtubs have certain operating conditions and require careful and careful maintenance.
Photo: budabar/depositphotos.com
General rules of care and operation
To care for an acrylic bath, they purchase special liquids or use home remedies. The main thing is that they are intended directly for washing polymer coatings.
Acrylic surfaces cannot be cleaned with powders, liquids, ammonia, alkali, acid, chlorine. Selecting a detergent with abrasives and acid will alter the performance of the acrylic or severely damage the surface. If you use a product with alkali or high acidity, this will lead to a violation of the integrity of the material structure. The abrasive components in the cleaning solution will leave deep grooves and scratches on the acrylic surface.
For cleaning use soft sponges or cotton rags. Microfiber cloths can be an alternative. After cleaning, the bath is wiped with a soft towel or cloth. It is undesirable to use very hot water for washing, this will lead to a change in the shape of the material.
Do not store metal basins or buckets in an acrylic bath, as well as bathe pets - traces of claws may appear on the surface of the polymer.
Daily care at home
The plastic surface is well cleaned of fresh dirt. Timely cleaning of the acrylic bath will prevent the appearance of limescale, rust.
Each time after taking a bath, its surface is thoroughly rinsed with warm water. Manufacturers warn that water temperatures over 70 degrees can damage acrylic. For daily washing, you can use a solution with laundry soap. It should be remembered that experts do not recommend the frequent use of chemicals, even those created for the processing of polymers.
Do not leave the bathroom wet. You can dry it with a soft cloth or long air. Disinfect the bathtub several times a week. This period can be increased or decreased depending on the degree of contamination of the tank.
spring-cleaning
It is advisable to use industrial products for cleaning acrylic bathtubs during general cleaning, if there is little dirt on the bathtub. Otherwise, housewives will come to the aid of home methods that serve as a good help in the fight against old stains, or strong solutions. True, the latter will have to be spent significantly.
General cleaning of the bathtub is preferably carried out twice a month using an appropriate product. Previously, the hostess must read the attached instructions and follow it when processing the bath. Once every six months, the acrylic surface must be disinfected with special solutions.
Features of cleaning bathtubs with hydromassage
If the tank is equipped with a hydromassage, this brings additional trouble to the hostess. The nozzles installed in it are responsible for supplying high-pressure water jets, so a lot of moisture often accumulates on them. This leads to the appearance of limescale and the accumulation of harmful microorganisms.
It is advisable to clean the acrylic whirlpool tub at least once a month. To do this, the bath is filled with warm water, which should cover the nozzles by 5 cm, and the air supply is turned off. A solution (50 ml of cleaning agent) is poured into the water, hydromassage is turned on. A glass of vinegar can be added to the solution for better disinfection. After 10-15 minutes, the dirty water is drained.
The second stage of cleaning consists in washing out the cleaning agent from the components of the bath. To do this, the tank is filled with clean water and the hydromassage mode is turned on for a few more minutes.
What not to use when cleaning
The polymer coating cannot be processed with hard, metal brushes. They scratch the surface easily. Experts do not recommend the use of powders, including ordinary soda, as well as products containing:
- Acetone, ammonia. They corrode acrylic, which threatens the appearance of holes in the bath.
- abrasive components. In addition to creating scratches, they quickly erase the enamel.
- Chlorine. The element increases the pores on the surface of the polymer, significantly reducing its service life. Acrylic loses its glossy appearance, becomes dull.
- Cleaning products containing acids. Acid quickly removes plaque and dirt, but destroys the protective layer of acrylic. Subsequent dirt accumulates on the walls faster, in larger quantities.
Handy cleaning products
Homemade acrylic bath cleaning solutions are no less effective than expensive store-bought detergents. They will help in case of significant pollution or after repair. The main thing is to know exactly what is suitable for washing an acrylic surface, and what can harm it. The most common home remedies are: citric acid, vinegar, toothpaste, etc.
Citric acid solution
Citric acid easily copes with greasy stains, simple dirt. Since plastic negatively perceives the influence of acids, this agent is not used in its pure form. To clean the acrylic surface, most of the bath is filled with warm water, pour 10 g of acid.
Leave the tank to soak overnight, drain the liquid in the morning. It remains only to rinse the bath and dry it with a soft cloth. In order not to spoil the surface, the acrylic bathtub is cleaned with citric acid once every six months.
Apple vinegar
Another remedy for washing an acrylic bath at home is apple cider vinegar. It will help to cope with serious pollution. You need to work quickly so as not to spoil the plastic surface. Housewives moisten a rag with a soft pile in the solution, apply it to the place of contamination and pour water on top.
Soda
In everyday life, only baking soda diluted with water can be used to clean acrylic. 3 tablespoons of soda are dissolved in 1 glass of water, a sponge is moistened in the solution and the stain is blotted with it, in no case rubbing the surface, left for fifteen minutes. The stain is washed off with water and cleaned with a soft cloth.
Toothpaste
One of the most gentle methods of home bathroom cleaning is toothpaste. The main thing is that it does not contain abrasive particles. A suitable paste is applied to a sponge or rag, rubbed over a dirty surface. After that, the paste is washed off with water, the bath is rubbed to a shine.
Household chemicals
If the hostess doubts the safety of using home remedies, she can pay attention to industrial products. The range of such funds is presented quite widely. The most common acrylic cleaners: Sif, Acrylan, Bass, Tim-Profi, Cinderella, Chister.
Sif is sold in the form of a gel, paste, cream. It does not give an abrasive effect, so its use on acrylic is safe. Sif cleans the bath and prevents the formation of plaque.
Acrylan is available as a cleaning foam for showers and acrylic bathtubs. Bass is a liquid suitable for daily rinsing of the font. Tim-Profi is a suitable tool for removing complex stains, eliminating unpleasant odors. The cleaner, in addition to removing stains, is suitable for eliminating stains and protecting against the formation of fungus.
Often, housewives are interested in whether it is possible to wash an acrylic bath with Sanoks, Pemolux, whiteness. Sanox, like Domestos, contains acids in its composition that adversely affect the polymer. Sanoks is rarely used if hard-to-remove limescale has formed. The cleaning agent is applied to the surface for a maximum of 10 minutes, after which it is washed off with plenty of water. The same should be done if the hostess has acquired Silit Beng. It is highly undesirable to use Pemolux and Whiteness for washing acrylic bathtubs.
Is it possible to apply Domestos
Domestos is a popular and effective remedy. However, for washing acrylic coatings, it should not be used frequently. Concentrated acids in the composition of the product can harm the plastic surface.
If severe pollution, limescale, rust has formed on the bath, Domestos can be used with caution. Apply the agent to the polymer can be no more than a few minutes. After treatment with a cleaning agent, the bath is rinsed and dried.
Special care products for acrylic
In order for the bath to maintain an aesthetic appearance, you can stock up on acrylic care products in advance. Often they are sold in the form of polishes and protective solutions. The former allow you to give the surface shine and gloss, the latter restore the protective layer of acrylic, disinfect the surface. Among these funds, the most famous are: Ravak, Acrylic Polish, etc.
Fight against heavy pollution
As mentioned earlier, you should not be zealous with chemistry when washing an acrylic bath. This will lead to a complete or partial loss of the original properties of the polymer. However, if the tank has become heavily soiled, limescale, rust, etc., it is unlikely that it will be possible to do without effective cleaning solutions.
lime plaque
Even if the bathtub is rinsed daily, poor quality water can cause limescale build-up. To wash acrylic from limescale, it is better to use industrial products: Sanfor, Ravak, etc. For preventive purposes, they are used at least once every two months.
water stone
You can get rid of strong plaque and water stone by preparing the following solution: dilute the cleaning powder for washing dishes with water until a liquid slurry is formed, add Whiteness (2 tablespoons) and vinegar (2 tablespoons) to the mixture. Apply the mixture to the acrylic surface, wait 20 minutes and rinse with water. Wipe heavily soiled areas with a soft sponge.
Rust
You can remove rust stains using a soda solution. The main thing is not to use soda that is not diluted in water. A liquid gruel is applied to the spots, wait about 15 minutes and rinse with water. Rub the stains is not worth it, it will damage the plastic.
Yellowness
A few simple methods will help get rid of yellowness. You can bleach the bath by mixing hydrogen peroxide and ammonia in equal proportions and wiping the problem areas with a soft cloth. Another remedy is a solution of lemon juice and vinegar. They are diluted in equal proportions and applied with a sponge to the places of contamination.
When serious pollution occurs, industrial products or home solutions are used:
Which brushes and sponges to use
Acrylic surfaces must not be cleaned with metal-coated sponges or brushes with hard bristles; only soft brushes and sponges are suitable for washing them. After cleaning, the bath must be dried. To do this, use dry wipes.
Acrylic bath disinfection
Acrylic does not allow microbes and dirt to accumulate in large quantities. However, this does not exclude their presence on the surface of the material. To disinfect the bath, housewives use industrial detergents, such as Tim Pro. You can use White. The bath should be filled with water, add 2 liters of Whiteness and leave to soak for 15 minutes. After that, the product is washed off with plenty of water.
Baths should be disinfected at least once every six months.
How to remove scratches with your own hands
To do this, you will need a professional set to restore the coating. Usually it consists of a special spatula, putty, liquid acrylic. Often use camouflage pencils, enamel paints. The choice of means depends on the degree of damage, the depth of the scratch.
Treatment of the damaged area
Before starting the restoration, the place of the scratch is carefully cleaned with sandpaper with a small grain size. Then use paper with a larger grain size. After cleaning, the surface is degreased.
Camouflage pencil
This tool is useful if the scratch is small and noticed in time. The pencil is comfortable and easy to use. They carefully apply several layers to the place of the scratch. Masking particles fill in the recesses, the scratch disappears.
enamel paint
Enamel paint is also easy to apply. Small scratches are treated with a brush, carefully masking the place of damage. If paint is used in the form of an aerosol, the surface is pre-cleaned with soapy water. You can use the bath only after the paint has dried completely.
Talk 0
Similar content
