Dismantling a cast-iron bathtub: two ways to remove an old cast-iron bathtub from an apartment. Dismantling and removal of a cast-iron bath. Quick disposal options Is it better to cut with a grinder and break

Before you make repairs in the bathroom, you need to prepare the room. Dismantling a cast iron bath is the main issue that needs to be resolved. However, this process is quite laborious, so the removal of a sanitary ware involves several stages of work. In addition, the removal of a cast-iron bathtub is also an urgent problem in the process of repairing a bathroom.

Renovating a bathroom is not an easy task, because before you get a beautiful and updated bathroom, you have to work hard. First you need to answer the question of how to remove and where to put the old cast-iron bath.

Preparing a bathroom for renovation

It is necessary to fulfill the basic conditions for preparing the room for the upcoming repair:

removal of all bath accessories;
disconnection of communications;
removal of furniture;
dismantling of the old cast-iron bath and washbasin;
cleaning the room from debris and objects that may interfere with the work of specialists.

Dismantling of obsolete plumbing

How to break a cast-iron bathtub quickly and without loss of time? This question worries everyone who has ever thought about the overhaul of the bathroom. Old cast iron bathtubs can be removed in several ways. The first of which is the free removal and removal of old cast-iron bathtubs.

Tip: There are a considerable number of special services that are ready to dismantle and remove a cast-iron bathtub in a matter of hours. Moreover, they are ready to provide such a service absolutely free of charge, but with the condition that they take the old plumbing with them. This is not surprising, because today the acceptance of cast-iron bathtubs for scrap metal is in great demand. Therefore, you can safely use the services of such organizations, for which you do not have to pay a penny.

However, not in every locality there are such initiative groups that are ready to carry out not only dismantling, but also the removal of a heavy cast-iron bath.

And yet, you should not despair, because there are many more ways that allow you to dismantle and remove the old cast-iron bath. For example, you can use the paid services of craftsmen who perform all work on the removal of plumbing, and from any material. As a rule, such enterprises have their own standard prices for services. And after your consent to dismantle the equipment, the repair team will arrive at the appointed time and remove the plumbing, in addition, they will be able to take out the cast-iron bath, but also for a certain monetary reward.

But if you are going to make repairs in your bathroom without the involvement of specialists, you will need to dismantle the cast-iron bath with your own hands. In fact, this process is not as complicated as it seems at first glance.

Self-removal of plumbing

This procedure will not cause complications if the old cast-iron bath was placed on supports, without any fasteners, decorative screen or brickwork, and, of course, if the dimensions of the doorway allow plumbing to be taken out without first sawing or breaking.

Tip: After dismantling, you can hand over the old cast-iron bathtub to scrap metal collection points, or simply leave it near the garbage cans. Believe me, there will definitely be no plumbing the next morning.

But if the product is installed in a steel frame or lined with brickwork, the dismantling process is somewhat more complicated. In this case, you will have to:

Shut off the water and disconnect the bath drain from the sewer system;
Then it is necessary to remove the mixer and all water distributors, because they will interfere with the process of removing plumbing;
When these nuances do not interfere with the process, you will need to arm yourself with a chisel and a sledgehammer. Using these tools, you will need to remove the tiles and skirting boards that cover the joints of the bath with the walls;
The next step involves the direct dismantling of plumbing. Using the lever, remove the obsolete equipment. If the equipment does not succumb to “provocation”, it will be possible to completely cut the entire structure with the help of an angle grinder with a metal nozzle. If the frame is made of bricks or blocks, use a sledgehammer;
When you finally finish with the frame, you will need to take out all the construction debris from the room. Then only the old plumbing itself should remain in the room. If you understand that, due to the large size, the product cannot be completely pulled out of the bathroom, you will have to break the plumbing equipment into several parts.

How to properly destroy a cast iron bath

How to split a cast iron bath? Many video clips answer the question of how to break a cast-iron bath, so you should not have any difficulties.

Important! Please note that this procedure will be accompanied by a serious crash, so you should not start repairs at night looking.

First you need to put the old equipment on its side so that it has free access from both sides. Since pieces of cast iron will fly off the product during the process, which can injure your face and hands, be sure to wear safety glasses, a hat and thick gloves. It is desirable that the fans are also not in the room.
The most vulnerable spot in any bath is the part of the bottom next to the drain hole. It is on him that it is necessary to deliver strong blows with a sledgehammer. When hitting from outside the plumbing, cover the hole with a rag to prevent splinters of cast iron from hitting you. These manipulations should be performed until a large crack appears along the entire bottom.
Then the bath must be turned upside down and direct blows to the walls of the plumbing. After dismembering the equipment into pieces, invite your fans to help carry the remnants of the bath out of the room.

Get rid of unwanted baths

So, where to rent a cast-iron bath? Cast iron products, of course, are durable, but not eternal. Therefore, sooner or later everyone asks the question: where to take the old cast-iron bath? The dismantling of plumbing equipment is a very difficult process, but not final, because it becomes necessary to take out the old cast-iron bath.

But the fact that the disposal of an old cast-iron bathtub can bring not only troubles, but also a certain monetary reward is encouraging. Because the acceptance of scrap iron is carried out in almost all cities. If you have your own transport and during the dismantling process you had to break the plumbing into pieces, you can organize the self-delivery of cast-iron bathtubs, having previously decided on the place of receipt of scrap metal.

But if you don’t have your own transport and it’s problematic for you to hand over an old bathtub weighing 150 kg, you can easily negotiate with special teams that will remove the equipment on their own, they certainly know where to put the cast-iron bathtub.

You just need to find ads at your place of residence and contact an organization where you can rent a cast-iron bath.

Conclusion

As you can see, the process of removing old plumbing can be solved relatively easily, but if you are also the owner of a cast-iron product, you need to immediately decide on the address of the enterprise where to hand over the cast-iron bath and get paid for it. Of course, if the plumbing equipment is not so easy to dismantle and take out of the bathroom, you will have to sweat a lot for some time, but the result is certainly worth it.

In most cases, bathroom renovations involve replacing an old bathtub with a new one, or even a new one, and in both cases, you will have to go through an operation such as dismantling. In principle, it is not difficult to perform, but if you have to deal with, then you don’t have to look for it here - you’ll have to sweat a lot. In this article from the site, we will talk about how to properly and with the least labor costs to dismantle a cast-iron bath. Moreover, at your choice, we will offer as many as two ways to solve this problem.

Dismantling a cast-iron bath photo

Dismantling a cast-iron bath: a way to keep the bath intact

In fact, such a dismantling of the bath will require you to tear it from its place, set it in a certain position and simply pull it out of the apartment, while spending a huge amount of effort. You can’t cope here alone - at least two pairs of strong male hands will be needed. The only way to make the job easier is to avoid intermediate inconclusive actions that usually occur when people do not know what they are doing. The principle "maybe it will pass" only leads to unnecessary labor and loss of strength - you can avoid this if you follow a certain sequence. The question of how to dismantle a cast-iron bath is solved as follows.

First you need to make sure that the legs are securely fastened to the bath itself - if one of them falls off during the work, then, to put it mildly, troubles can happen in the form of broken toes or hands, and possibly even more serious injuries. In most cases, the legs are attached with wedges - they must be all in place and tightly packed (adjust them if necessary).
As a rule, almost all cast-iron bathtubs were connected to the sewer, as cast-iron as the bathtub itself - from many years of operation, these cast-iron siphons are so rusty to the bathtub that it is not possible to unscrew them in a normal way. Therefore, we simply take a grinder, put on goggles, lie down on the floor next to the bathroom and cut off the siphon with a grinder.
Dismantling the bath using a grinder photo
In most cases, the old cast-iron bathtub is lined around the perimeter, which also creates some problems when dismantling it - it makes it immovable. This tile, mortar (or what you have smeared around the edges with) should be removed around the entire perimeter - only after that the bath will gain mobility, and it will be possible to continue dismantling the old bath. Further, as they say, a matter of technology.
Now the bath should be moved away from the wall. All methods are good here, but the most effective is a crowbar or a mount. If you work together, then you can try to simply pull it away from the wall so much that a person can freely pass there - 400-500mm will be enough.
Now we put the bath standing up, for this one will have to climb behind the bath. We take the bath by one of the sides and simply raise it to a standing position - in the process of work it will be possible to intercept the legs. They will play their part and serve as excellent handrails to help you transport the bathtub through the doorway, which is the next step in deciding how to take out the cast-iron bathtub?
The technique of transporting the bathtub is very important here - without observing it, it will not work to take out the bathtub. It must be brought into the opening while standing, in an expanded position at 45˚ - as soon as the legs pass behind the doorway, simultaneously with the removal of the bath, it will need to be slowly turned around the door frame. In this way, you will ensure free passage for the other two legs.
Everything, the main work is done - the front door to the apartment has a width of 900mm and does not present any obstacles for taking out the bath. The bath can be taken out into the street, loaded into a car and transported to the country, where you will find for it at least a dozen ways to use it, allowing it to extend its life in a different form. For example, an artificial reservoir can be made from it.
How to clean a bath photo

As you can see, the question of how to dismantle a bathtub made of cast iron is easily solved, but even if you know how to perform these works, you still have to sweat a lot.

How to break an old cast iron bath: dismantling with a sledgehammer

This is the easiest way to resolve the issue of how to clean the bath - and with this approach to business, you will have to strain much less. In fact, you just have to break the old cast-iron bath with a sledgehammer - as they say, break - do not build or even dismantle. But, despite this, such a dismantling of the bath should also be done, as they say, with feeling and arrangement, so that God forbid you do not injure yourself. If we represent point by point this method of removing the old cast-iron bath, then the order of work will be as follows.

As in the first case, to start such a dismantling, the old bathtub must be cut off from the grinder and freed from cement mortar around the entire perimeter. Also, the bath will need to be slightly moved away from the wall - 10-15 centimeters will be enough.
Two cuts with a grinder and a couple of blows with a sledgehammer will allow you to divide the bath into two equal halves. For this to happen, you need to know where and how to make cuts. There is nothing secret here - cuts are made on the curved edges of the bathtub clearly in the middle on its two sides. The wings of the bathtub must be cut through completely - they give the bathtub additional strength. After that, we simply hit the bottom of the bathtub with a sledgehammer, and it kind of folds down.

How to break a cast iron bath photo

In principle, in almost all cases, this is enough to freely take out the old cast-iron bathtub on the street with the efforts of two strong men. But if you decide on your own how to break a cast-iron bath, then to facilitate the task, it is generally better to chop it into pieces, put it in bags and take it to a landfill or scrap metal collection point. For further work, the grinder is no longer needed - the sledgehammer does an excellent job of crushing brittle cast iron into small pieces.

How to dismantle an old cast-iron bath with a grinder, see the video.

How to dismantle an old bath: work safety is paramount

So, we figured out the question of how to cut a cast-iron bath, now it only remains to highlight the topic of work safety. Without this, nowhere - the unorganized work of two people and even simply the wrong use of a grinder or a sledgehammer can lead to serious injuries. So what should you beware of when dismantling a cast-iron bath?

Inconsistent work of two people. Each step or movement must be strictly verified and coordinated. Imagine what happens if someone relaxes at the wrong time and the bath crushes the other person? Quite often, in the process of dismantling cast-iron bathtubs, hands are injured. They are either pressed against the wall or dragged between the bathroom and the door frame - the last place is the most traumatic, so you need to be extremely careful here.
Grinders and sledgehammers, which, as a rule, emit a lot of small particles in the process of work that can damage the eyes and skin of a person. This is especially true when working with a bathroom - its enamel is chipped off in large pieces that can cause serious injury. When doing such work, you need to take care not only to protect your eyes, but also your whole body, for example, wear tight pants and a long-sleeved shirt. Let it be a little hot, but your body will not suffer!

How to dismantle a cast-iron bath with your own hands photo

This is how things stand with the answer to the question of how the cast-iron bath is dismantled. It should be understood that despite the seeming ease of the whole procedure, in fact, this work is complex and difficult. In many ways, it depends on the size of the cast-iron bath - if we talk about a small bath 1.5 m long, then it is easy to handle. But with large products of this type (for example, with a bathtub 1.7 m long), things are much more complicated, and their weight, which goes off scale for 100 kg, is to blame.

Albert Yasaulov
How to split a cast-iron bath into pieces? Why break? Make cuts with a grinder - and with a sledgehammer. Autogenous. Cutting is not destiny? With a sledgehammer - punch a hole in one place and it will go to crumble like there is nothing to do, just hit with sharp blows, and take a sledgehammer with a short handle - God forbid you disperse and smash everything in the apartment. A friend of mine did just that, beat and beat with a sledgehammer and smashed it, then took it piece by piece to the trash heap. True, he lives on the first floor, and if you are taller, then I don’t think that the lower neighbors will be very happy.

Lyubov Opalikhina
Is it possible to cut an old bathtub with a grinder? it's just not realistic to take it out. Make cuts and break it with a sledgehammer. It should turn out better than mine - I just smashed it with a sledgehammer, but it’s hard and very noisy. Is it worth it to fool around - two hits with a sledgehammer (but in certain places) and it fell apart into three pieces. It will break only on the way. If you find a problem, call a couple of homeless people - they will endure it. And they will drag it to the metal collection point. I had this from the garbage dump, the bath was immediately dragged away

Viktor Samokhvalov
How to break a cast-iron bath They are taken whole. They will come straight home and pick you up. At least that's how it works in our city. Even ads are up. Cast iron is not hard to break. Take it to the street and beat. Cast iron is prickly. Bulgarian cut. Sledgehammer.

Valentina Lisina
How to get a cast-iron bathroom out of the apartment (5th floor, no elevator)? Two bums and a bottle of vodka You can smash a sledgehammer into a window or from a balcony We carried it out together. Also cast-iron (more than 100 kg)

Vitaly Negushin
What's better? Buy a new bath or cover the old one with a special coating? There is money - buy a bath! We made an acrylic insert - for more than 5 years the bath looks like new, the pleasure cost 5500 rubles. , the master spent 2 hours. if the old bath is not split into pieces, I see no reason to spend money on a new one. It seems to me that it is better to put a new cast-iron shower stall. Steel and acrylic for nothing.

Vadim Okunev
How to take out a cast-iron bath? Can it be broken? If it’s cast iron, then you can break it into pieces with a hammer and hand it over to metaplom, it’s expensive now! Throw out the window. I called the Tajiks who work as janitors, they dragged away like ants, you won’t find it. It won’t break. And not alone. You can call industrial climbers, and through the window. It is unlikely to split, to cut. It’s easier to throw it out the window, it will split itself)

Denis Veshnyakov
How to break a cast iron bath? Kettlebell 32 kg. Another CAST IRON BATH! aaaaaaa NIGHTMARE

Albert Gladkikh
What kind of bath would you recommend from personal experience (cast iron, steel, acrylic What material is more convenient to use? Thank you! There are no comrades for taste and color, but in any case, not steel about acrylic - they say, not durable, it scratches, some special means for washing, etc. - complete nonsense. I have an acrylic bathtub for 3 years. Excellent thing. Easy installation, because it is light .... The most excellent is steel, because cast iron is brittle like acrylic, and steel was hammered, painted and all OK.

Alexander Dryablov
A plastic sewer pipe was connected to some kind of cast-iron solution - how to fix a leak there? It happens often. Don't be self-employed. Call a locksmith from the Housing Office, pay him the money, he will do everything. It will become cheaper. Dig out this solution and buy a special rubber cuff. Insert a 70-40 mm rubber cuff into the cast-iron socket. A 50-mm plastic pipe enters this cuff with difficulty, but it enters. This is the most reliable. If it does not work out, put a cuff of 70-50 mm.

Valeria Kondratieva
Hello) Faience sink in the kitchen, how is it? it seems to have done something stupid = (? / + No, before there were cast-iron sinks with a coating like those of bathtubs and steel enameled ones. Cast-iron ones washed well and served for 20 years), steel-enamel was chipped off just like from enamel. pots and teapots And faience is the same type as the sink in the bathroom ... Refuse of course. Previously, when there were no stainless steel sinks, we had such first 5 years to clean well, but then.

Lilia Glebovskaya

What happens if the hair dryer falls into the water? Let's calculate) the hair dryer is an electrical appliance 220-240V 1200-1800 W (heater) The motor itself is 150 W. Further, if you fall in the bathroom, you can break your head and even die if a strong blow is not indicated how they will slip ... If the bath is cast iron and grounded, then an electric shock is not excluded, because there will be a phase on the hair dryer. And so, the short circuit will be through the wire located before the heater, since the electrical conductivity of water is very high.

Olesya Ozerkova
Mystery! My bathtub is 70 cm wide, and the passage of the bathtub is 55 cm. Question: How did it get there and how to remove it from there? 60 cm high bath can not be. She has a standard height on legs of only 56-58 cm. They brought her in sideways. I have a passage of 60. and a corner bath 105 by 150. I calmly entered. The depth of most baths is standard about 45 cm without legs. except for the iron ones, of course. When dragging a cast-iron instead of a song, indecent sounds ...

Victor Lebedev
Of course, I’m not a plumber, but it’s a pity for money for an uncle from the side: HOW TO REPLACE A SEWER PIPE IN THE BATH WITHOUT PROBLEMS? Ho-ho! And do not think without problems! I am a plumber and I can say one thing: not moving the bath away is sooooo dreary and difficult. With all the tools and experience, I did this work alone for two days. But if you decide, remember: the most ... The whole difficulty is to throw out the old pipe so as not to break the common riser. If you succeed, then collect the plastic. A pipe is simpler than a steamed turnip P.s. If you do it yourself, do not forget about the slope of a few degrees from ...

The need to cut the cast-iron structure arises when dismantling communications. You will learn about how to cut cast iron and structures from it from the material.

Most often, the need to cut the cast-iron structure arises when dismantling outdated communications. Hope for a speedy completion of the work collapses immediately - in the Soviet Union, pipes were connected with cement, sulfur and aluminum, so it is incredibly difficult to cut them. But a couple of working methods are known. You will learn about how to cut cast iron and structures from it from the material below.

As with any metal, cast iron cutting methods are divided into thermal and mechanical. The choice of a particular tool depends on the design features. The following is the equipment that saws (or cuts) cast iron:

pipe cutter;
angle grinder;
chisel;
hacksaw for metal;
jigsaw
plasma installation;
gas cutters.

Now it is worth evaluating cutting with the help of these tools with cast iron objects.

pipe cutter

This is a special device for cutting pipes of different materials. There are manual (mechanical) and electric tools. Both types are suitable for diameters 15-360 mm.

First, a carbide disc is mounted on the apparatus. The removable element has a number of advantages over classic abrasive ones. For example, 4 times faster cutting speed, no sparks and no need to add any substances to the cutting zone. A diamond coating is applied over the cutting edge, which prolongs the service life of the products. Examples of pipe cutters for cast iron pipes are portable Exact Pipecut products for diameters less than 360 mm.

Alas, rarely a home pipeline can be easily cut with a pipe cutter. It may be difficult to access the tool or the cutting point is bent so that the device cannot be captured. Therefore, it is worth considering other options.

Angle grinder

Working with a grinder is quick and convenient, but not without drawbacks. For example, it cuts only in a straight line. An attempt to make a figured cut will lead to “biting” of the disk, its breakage, and possible injury to the user. Therefore, the machine is used for cutting in a straight line. Another disadvantage is the fire hazard of the method (abrasive disc + metal = sparking). Before work, you will have to wear goggles, face protection and hands.

Cutting around is more efficient than with a jigsaw, so more often users choose a noisy grinder. When buying a cutting wheel, prefer products on a bakelite bond, because they are an order of magnitude stronger than their ceramic counterparts.

Hacksaw for metal

A device similar to a grinder by the principle of operation. You will have to mess with it for more than one hour, especially if you cut a large-diameter cast-iron pipe. The disadvantages of the method are time costs, physical effort, the inability to work in a limited area. But the method is safe.

Working with a chisel and hammer

This pair of products will help separate cast iron in a hard-to-reach place. Dismantling work begins with pipes remote from the riser in places where a grinder or a hacksaw cannot be inserted. Since cast iron is a brittle material, it is easily destroyed after point dynamic loads.

A good percussion instrument has a rubber or polymer tip to soften the impact slightly. This is necessary so that the pieces of cast iron do not scatter around, do not fall into the riser and do not create a blockage.

A chisel and hammer work great with Soviet-era cast iron, that is, combined with sulfur, aluminum and cement. As you move towards the riser, there is usually more free space to work, so further cast iron can be cut off with a more efficient device. As with a grinder, when working with a chisel, it is recommended to cover areas of the body into which a cast-iron fragment can fly off.

The productivity of work is extremely small, but sometimes you can’t do without them.

Electric hacksaw

It is much more convenient for the user to work with an electric saw than with a grinder, although the principle of operation is not much different. A lightweight device with smaller dimensions than an angle grinder, the web is consumed more slowly than the disk, if it is correctly selected (marking HSS or BIM, and the length is also taken into account).

Less trauma, the speed of the process is something between a grinder and a manual hacksaw, the cheapness of consumables and their availability are the advantages of cutting cast iron with an electric hacksaw.

Plasma cutting

The method relates more to industrial than to household, so it will not be considered in detail. If the goal is the minimum consumption of material, speed of work, noiselessness, there is no better equipment for cutting cast iron. The plasma will make cuts in workpieces with a thickness of more than 200 mm, and the sawn material will hardly have to be processed at the end of the work.

The method is used by large enterprises of metallurgy, industry, where there is a need for cutting and transporting scrap iron. Plasma installations are indispensable for volumetric work.

gas cutting

There are two methods of gas cutting of cast iron:

gas-oxygen;
oxygen spear.

In the first case, the workpiece is affected by the thinnest jet of flame supplied under high pressure. The product of combustion is usually a mixture of oxygen with kerosene or diesel fuel. By the way, an effective method in the elimination of man-made accidents.

The second method resembles oxy-fuel, only a thin tube of hardened steel acts as a cutting element. Its tip is heated to almost 1500 degrees (welding / soldering iron / lamp), then oxygen is supplied through it, ignited at the outlet and heated to 2000 degrees. The resulting burning mixture easily copes with thick cast iron.

Both methods are good, but there are disadvantages - it is important to have experience with gas equipment. Responsible and precise cutting should only be done by a professional. The second drawback is the release of gas that is harmful to health during the operation of the torch.

The method is suitable for outdoor work or in the garage. For example, the need to eliminate a cast-iron lock from swing gates. The cutter works quietly, you will not disturb anyone.

Conclusion

Based on the opinion of experienced builders and repairmen, the best ways to cut cast iron are:

for home - grinder, hacksaw;
in the garage - gas cutter;
in production - plasma installations.

Experienced people advise taking several tools into service when working at home, starting with a chisel and ending with a jigsaw.

Do you know how to quickly saw off a cast-iron lock or pipe? Share your experience with readers in the comments.

During renovations in the bathroom, the question often arises of updating old plumbing.

The first candidate for a replacement is always a bathtub, especially if it is a cast-iron model that has been standing there since Soviet times.

After all, the industry offers the consumer a wide selection of other, more modern materials: acrylic, wood, and even. Products made from them are often more practical than Soviet cast iron. But, of course, and.

But the question arises: how to dismantle and remove such a colossus? As they say - "break, do not build." Let us consider in detail all the nuances of this laborious process.

In total, there are 2 main ways of doing work:

dismantling while maintaining integrity:
- only the case itself (when it is not important to keep the coating)
- font enamels (when the bath is planned to be used further for its intended purpose, for example, after restoration)
destruction.

The first option is simpler in terms of dismantling itself, but it causes big problems when removing the product. After all, such a font weighs an average of about 100 kg.

This method should be used if you still decide to restore the coating or do something with your own hands from the case itself.

Breathe new life into an old cast iron bath. Craftsmen have come up with many options for its alternative use: flower beds, ponds, garden furniture and much more.

Tools

For quality work, you will need the following tools:

perforator;
chisel;
chisel;
a hammer;
gas key;
Bulgarian;
sledgehammer;
respirator;
protective glasses.

The work ahead is very dusty and dirty, so you need to take care of protective equipment.

It is worth at least taking a respirator and goggles.

How to dismantle correctly with your own hands?

Below, we have provided detailed instructions for carrying out the work with all the nuances.

Remove old siphon

The first step is to disconnect the siphon. As a rule, in old houses these siphons are cast iron, and under the influence of moisture and time, all joints are sintered and corroded, so it is unlikely that it will be possible to do without special compounds that corrode rust. You can use, for example, WD-40 - in the common people "Vedashka". It is necessary to sprinkle the connections and leave them in this state for 1 hour.

Then, using a wrench, unscrew the nut, thereby disconnecting the siphon.

The diameter of the nut is often very large, so you will need a gas wrench for this job.

If the nut does not lend itself in any way and no means corrode the “secular layer” of rust, it remains to cut off part of the pipe with a grinder. Or not? There is one interesting life hack:

insert the chisel into the punch chuck (this is such a special nozzle in the form of a spatula);
switch it to the "impact without drilling" mode;
rest the chisel against the end of the nut and press the start button.

Most likely the nut will give way. Do this procedure several times until you can unscrew it with a key or hand.

Release the sides

Often in the USSR, tiles were laid from the side of the bathroom, or even a corner was made of it around the entire perimeter of the fit to the wall. In this case, it’s easy to pull out the bath - it won’t work, first you need to beat off the tiles from the sides. For this, the already familiar puncher with a chisel is suitable, in impact mode without drilling.

Just consistently walk them around the edges. If there is no perforator, it does not matter. A hammer with a chisel can also cope with this, but the work will take much longer.

If embedded in the wall of the room?

It also happens that the font is embedded in the wall, for example, as in the photo. In this case, you will need to remove the legs from the side of this wall. If you can’t unscrew them with a key, or they are tightly embedded in the floor, you can cut them off with a grinder.

Then under the freed space put wooden boards or plywood sheet so as not to split the floor. It remains only to press hard on the side of the bath, you may need the help of a second person, and it will fall down, falling on the boards. If you can’t push it through, you can try to knock out with the help of a perforator that part of the wall on which the font rests.

Should I cut off the legs?

Sometimes the legs are muffled and deeply embedded in the floor. In such cases, it remains cut them with a grinder. Take a disc for metal and carefully file the back legs first, and then the front ones. This is important, because if the order is different, there is a chance that the font will fall on you.

It is better to file the legs at the base (floor). In this case, you will have additional handles that are convenient for transportation. Of course, you should first check whether they are firmly attached to the font.

How to take out of the apartment?

After you have released the bowl, put it in an upright position - firmly grasp the upper legs. Then tilt it slightly to make it easier for your partner to grab the bottom ones.

The doorway in the bathroom is usually quite narrow. So it just won't work. You must first get the front legs behind the doorway. Then move the font diagonally and only then start the rear legs.

How do they endure if the legs are completely cut off? In this case, it will be easier to put the bowl on the long side on its side and gradually move it along the floor, directing it diagonally into the doorway. After you took it out of the bathroom - you can grab one person by the front end, the second by the back (as if you were carrying a stretcher), so it will be easier to pull it out. Then take out a matter of technology. What to do if there is no partner?

Is it possible to split or break with a sledgehammer at home?

If you work alone and there is no one to help clean the whole building, the rational solution would be to carry out the removal in parts. To do this, you need to break the font. How best to do this?

The fastest, but noisy and dirty solution is to work with a sledgehammer:

cover the font with a damp sheet or other large piece of cloth. This will help to avoid dust and scatter of fragments.
Then hit hard with a sledgehammer on the side of the tub.
If the cast iron does not crack, you can use some kind of wedge, for example, a crowbar. And hit on him. The dome will definitely break.
You can cut cast iron into pieces of almost any size.

The main disadvantage of this method is that it will take a long time to clean up the space from small fragments and dust. And the noise, of course, will be very strong, because the shape of the bath remotely resembles a bell.

Really break without noise?

Many often ask this question, because not all neighbors treat repairs with understanding. Of course, you won’t be able to get rid of the sound, but you can make the work a little less loud:

make a few cuts on the body with a grinder;
insert a piece of ground scrap into them;
hit the crowbar with a sledgehammer.

The tub should crack.

Is it better to cut it with a grinder and break it?

There is another way to divide the font. It sawed it with a grinder. Here, of course, you will have to suffer longer than with a sledgehammer. But on the other hand, dust and fragments will be many times less:

During operation, pieces of enamel and scale will scatter around, be sure to wear safety glasses and a respirator.

install a metal disc on the angle grinder (grinder) (it is better to use 230 mm models, with them the process will go much faster);
start cutting in the middle, sequentially moving from the sides of the bath to the bottom;
when it comes to an end, you are already going to go to the bottom and close 2 cut lines from the front and rear sides - ALWAYS place wooden blocks under the van, otherwise the halves will come together and bite the disk.
When the cut is closed, the work can be considered completed. If the halves do not open, slightly press down on the bottom and it will break right away.

In the course of work, the disk must be allowed to cool down, so pause every 1-2 minutes.

The procedure can be carried out until the size of the parts satisfies you. What else can be cut and how to cut? It’s difficult to find an alternative to a grinder, of course you can make cuts along the sides and with a hacksaw, but you won’t be able to cut further.

Where to put with benefit?

You will be surprised, but even from an old, rusty bathtub you can benefit, on how to do this below.

Scrap metal removal

You can sell it for scrap metal and earn good money. Some companies even offer free dismantling and removal services, this will save you a lot of time and effort. More about .

Second Life

With a little imagination and "straight hands", you can make really amazing things out of cast-iron fonts. Furniture, ponds and even barbecues. More useful inventions from a cast-iron bath in our article.

Useful video

We have prepared for you an interesting video about dismantling:

Conclusion

As you understand from the article, dismantling a cast-iron bowl is a difficult and troublesome procedure. But we put everything on the shelves, so you can easily cope with this difficult task. Be sure to pay attention to the fact that by handing over the font for scrap, you can not only get rid of unnecessary problems with the removal, but also get extra money.