How to attach a mirror to a wall without drilling. How to hang a mirror on the wall - fastening methods and reliable holders. Installing a mirror on the wall in the bathroom

It is very easy to visually expand a small room and make it brighter if you install mirrors on the walls in the right places, at a certain angle to the light source.

Mounting a mirror on the wall in various ways

You can see your reflection in calm water and various polished metal objects. And even in an ordinary glass surface, you can see yourself if you stand in the light, and darkness reigns on the other side. However, in fact, the mirror is the same glass, just a special amalgam is applied to it from the back, which ensures the refraction of rays, creating a reflection. The thickness is different, from the thinnest plates within 2-3 millimeters, to reliable half-centimeter options that can be drilled for through fixation with screws.

By the way, it is not advisable to perforate glass on your own, it can easily crack, it is better to entrust this task to specialists or buy a model with ready-made holes. Mirrors are sold for the most part as is, without baguettes, fasteners-brackets may be included in the kit. You can limit yourself to ordinary screws, especially if they have decorative hats, as long as they are wide enough. There are special plate fittings that allow you to mount several mirrors closely in one or several rows, covering most of the wall or its entire surface with them.

There is another widespread installation of a mirror on the wall - in frames, to which special loops are attached for screws or building nails. Small mirrors can be glued to the wall using double-sided construction tape or special glue (liquid nails are not always suitable, because of the composition that can destroy the amalgam). Mirrors with a side size of up to 50 centimeters are not recommended to be fixed with screws or massive fittings, since the fixing elements will be unnecessarily noticeable.

Detailed instructions on how to hang a mirror on the wall

Very often, even during the construction of a house, places are determined where various interior items will be located, including mirrors. Sometimes this is justified by the fact that the owners plan in advance to expand the space with the help of reflection, or prudently prepare a place for the child to practice ballet. And, since such planning involves the long-term placement of the interior detail in question, it is very important to know in detail how to properly hang a mirror on the wall in the bathroom or hallway.

Master class mirror installation - step by step diagram

Step 1: Preparing and Marking the Wall

It is very important that the surface on which the mirror will be mounted is perfectly flat. Therefore, the wall must be leveled as carefully as possible, the plaster must be dense, without cracks and primed from dust. Otherwise, if it is decided to use glue to fix the mirror, it can be applied to any finish, including wallpaper. After making sure that the selected area is absolutely flat, we make markings using a plumb line and a level so that the glass is fixed without distortions. We beat off the vertical line along which we will navigate with a coated thread, instead of which you can use a laser beam.

Step 2: Setting the low point

Having determined the height at which the lower edge of the mirror will be located, we prepare the corresponding timber trimmings. In order for the glass to stand evenly, two props are enough. Due to the fact that the geometry of the room may be incorrect, and the floor slab may not coincide with the horizon, just in case, we prepare thin plastic or metal plates that can be used to build up supports.

Step 3: Preparing the Mirror

The back side with a thin layer of amalgam is carefully wiped with a soft, slightly moistened cloth, removing the smallest dust particles.

Then we take a special glue for mirrors or liquid nails with a neutral composition that will not destroy the reflective coating.

Every 20 centimeters we apply dots of small portions of glue in even rows. Carefully set aside the glass part of the interior.

Step 4: Preparing the supports

After the mirror is installed on the bars, there is a chance that they will be knocked out from under the edge of the glass by a careless movement. As a result, distortion may occur. To prevent this from happening, it is recommended to glue the supports to the wall with construction tape as tightly as possible.

Step 5: Attaching the Mirror

It remains only to install the prepared mirror on the bars (after applying the glue, you need to act quickly so that it does not start to dry out) and press it against the wall.

We check the positioning relative to the horizon with a level and, if necessary, we put pre-prepared plates under the lower edge.

We run a rag over the entire glass surface, slightly pressing so that the glue disperses over the entire area of ​​​​the back side, and at the same time erasing traces from the palms. Bars can be removed after 2 days.

If you need to mount several mirrors, the supports can be installed at the joints between them so that the lower edges are at the same level.

Installing a mirror on a wall in a bathroom differs only in that all the gaps between the edges of the glass and the wall must be covered with sealant to prevent moisture from entering the amalgamated surface.

Which mirror to hang in the hallway - design secrets

Reflective surfaces in rooms often serve not only for their intended purpose, but also to improve the layout. In particular, a narrow corridor, on one of the walls of which a wide growth mirror is suspended, will seem much wider. And by installing a couple of lamps above the glass surface or on the sides of it, you can get the effect of diffused light. Stained glass film will help decorate the interior item of interest to us according to the design of the room.

Remembering the law of physics “the angle of incidence is equal to the angle of reflection”, you can direct the sun's rays with mirrors in such a way as to disperse the darkness in the most remote, deaf nooks and crannies of a house or apartment. It should be remembered that under the influence of direct ultraviolet light, the amalgam tarnishes over time, as a result of which the mirror becomes cloudy. It is also undesirable to hang mirrors at an angle to the vertical, since the reflection in this case will be somewhat distorted. For greater convenience, it is recommended to follow certain rules when placing the piece of furniture we are considering.

First of all, in order to fully use the full-length mirror, you need to hang it so that you can retreat from it by at least 1.5-2 meters.

In addition, in order to see yourself in reflection from such a distance completely, the lower edge of the glass must be no more than 50 centimeters from the floor. Based on the average height of a person, it is recommended to place the upper edge of the mirror at a height of at least 170 centimeters. If you only need to see the face, for convenience, it is better to purchase a reflective surface with a vertical edge length of at least 40 centimeters. What is the best mirror to hang in the hallway? A model with a height of 60 centimeters will give a comfortable view to the waist, up to 120 centimeters - from the crown to the knees, and in full growth - from 140 centimeters.

Of course, that every person has a mirror in the bathroom and before it is there it will need to be hung on the wall in some way.

Of course, if the mirror has a frame, then it is equipped with a special device on this frame with which you can easily hang this mirror on the wall.

How to hang a frameless mirror on the wall

This is a really difficult question, although you can do it yourself.

Where can I hang a mirror

First you will need to decide on a place where you can hang a mirror. The mirror should be hung only above the washbasin, so that it would be convenient to use it - approximately it should be located at a height of about 1.5 - 1.6 meters from the floor.

We hang a mirror on the wall.

In order to hang a mirror on the wall in the most common way, you will need to use the following tools:

- Hacksaw for wood;
- Regular pencil
- Roulette;
- Spirit level;
- Reiki from alcohol;
- The mirror itself;
- Masking tape;
— The tape is double-sided in order to fix the mirror.

After these materials have been collected, you can begin the process of installing the mirror on the wall:

1) In relation to the washbasin, the height should be approximately 20 centimeters, although this also depends on the exact size of the mirror;

2) then, using a pencil and a tape measure, it will be necessary to measure this distance on the wall;

3) Two supports are being prepared - it is best to use a tree for them - these should be small two planks that can hold the mirror for some time;

4) then you will need to make the same supports according to the measurements that were made earlier. To do this, you will need to use a hacksaw for wood;

5) when the supports are ready, they will need to be installed in a vertical position, while they must be supported on the two extreme points of the sink. Whether they are really perfectly vertical must be checked using a spirit level. After that, using masking tape, you will need to fix these supports.

6) Then a special tape must be glued to the back of the mirror itself, which is glued on both sides. In this case, the strips of this tape must be glued exclusively in a vertical position at a distance of approximately 15 centimeters from each other;

7) After this tape has been applied, the mirror will need to be carefully leaned against the desired wall. Using the same spirit level, you can see how evenly it is installed;

8) at the very end, very carefully, you will need to walk over the entire area of ​​\u200b\u200bthe mirror and gently press it against the wall to which it is attached.

What can you hang a mirror on, except for this method. There are other ways by which you can hang a frameless mirror on the wall.

Hanging a mirror with liquid nails or glue. To hang a mirror in this way, you will need to evenly distribute liquid nails or glue over the entire area of ​​\u200b\u200bthe mirror - special attention should be paid to the edges of the mirror. You need to apply at a distance of 5-8 centimeters from each other.

And also you can watch a video on how to hang a mirror on the wall

Who is not familiar with the modern glass mirror? The design is a polished glass sheet with a thin layer of metal applied to its surface, the so-called amalgam. For the production of budget models of mirrors, aluminum particles are used as a deposition layer, for more expensive ones - silver. From above, the layer is covered with a varnish that protects the fragile amalgam from the negative effects of the external environment.

Such a delicate and fragile element of the interior must be securely attached to a vertical surface. Let's deal with the question of how to mount the mirror on the wall, and try to give an exhaustive answer to it.

Attaching mirrors is easy.

If you have had experience with mirrors and managed to fix them, then there should be no difficulties. If you are a beginner, read the instructions for mounting the mirror on various vertical surfaces.

Mounting Features

Today, there are three main models for mounting a mirror sheet on a wall:

• gluing using double-sided tape;
• installation with special glue;
• screwing with screws.

The first method is suitable for mounting a small mirror on a wall, the area of ​​​​which does not exceed 1 m 2. The holding force of the tape is not too high, so the reliability when attaching mirrors with a large area is reduced. It is necessary to cover the entire back side of the mirror with adhesive tape, drawing a sticky grid, but even with this method, the adhesive tape is pulled back over time, and the structure may fall off.

Mounting with screws with special brackets-holders differs in the amount of work and their subtlety. When using this method, there is a need to drill holes in the mirror sheet itself, so care must be taken, and even better, give the mirror to a special workshop where it will be processed without the risk of damage.

Mirror on a tiled wall

The most acceptable method of attaching a mirror to a bathroom wall is with glue. Using a special compound for mounting mirrors will avoid unwanted drilling of holes in the bathroom tiles.

When choosing a bathroom mirror, pay attention to its features. For a room with high humidity, it is better to choose a model with a silver amalgam, covered with a protective and additional layer of varnish. This design is insensitive to temperature extremes and the accumulation of condensate and can last more than 15 years.

Mirror fittings

To determine the diameter of the holes for mounting the mirror on the wall, you must first select a set of fittings in the workshop. One fastening package consists of a brass sleeve with a plastic gasket, a decorative nut, a self-tapping screw and a dowel.

The technological process of mounting a mirror sheet

It is customary to hang large mirrors at some distance from the floor. So it will not get very dirty, the risk of damage will decrease, and it simply will not interfere, for example, when replacing a baseboard in an apartment. The optimal distance from the baseboard to the mirror is 10-15 cm.

To hang a large mirror on the wall, you need to create a special mount. Getting started, you need to mark up for future holes in the wall. To do this, make an impromptu but reliable stand (you can use chipboard scraps) for the mirror. Attach it to the wall and see how best to place it. Then mark the places of fasteners and holes for them. Carefully remove the mirror and place it on a flat, horizontal surface to avoid damage. Continue to work with a vertical surface. Check the layout for correctness and set the symmetry. After that, in the places of the drawn holes for the dowels, use a drill to make holes.

When mounting a mirror on a plasterboard wall, there is no need to create markings. Holes can be drilled in the wall by attaching a mirror sheet to it using a thin-walled tube.

Dowels are installed in the drilled holes, after the mirror has been removed from the wall to a more secure position. It is important that the size of the "butterfly" of the dowel differs from the diameter of the drilled holes by 0.5-1 mm upwards. Before installing the dowels, the holes in the wall can be additionally lubricated with PVA glue or any other. This approach will help prevent crumbling of the gypsum and increase the level of adhesion of the dowel to the wall. You can skip this step, but this way the mirror mount on the wall will “sit” more securely.

As you can see, there is nothing complicated in the process of mounting a mirror sheet on the wall, but you can easily decorate the interior with a new beautiful and modern element.

Now you know how to hang a mirror on the wall, and such a seemingly simple but responsible process should not cause difficulties during the work. Learn to work not only on yourself, but also on the environment that surrounds you. Start with a mirror in your home and you will see how the interior will change dramatically.

A mirror is an indispensable element in every home. It would seem that it is difficult to install it? But when it becomes necessary to hang it, questions arise.

Now there is a huge selection of mirrors in stores: large, small, with designer decoration. Some of them have no fasteners at all, which raises a logical question about installation. How to carry out the installation?

Do-it-yourself fastening

When buying a product, carefully inspect it for elements of distortion and defects. It should be smooth, without spots and scratches. Pay attention to the fastening fragments, if any. Before purchasing, choose a place in the apartment where it will hang. The mount itself is usually installed so that it is not noticeable.

Do-it-yourself installation does not require special skills; all existing methods can be performed independently. The most common and familiar method is on nails. But they leave a mark in the wall, later, if you remove the mirror, then the hole will need to be sealed. Someone prefers the picture method: with the help of a special thread it is attached to the surface.

When installing, be careful not to damage the surface of the mirror.

Mounting methods

There are several different methods:

1. Glue.
2. For special holders.
3. On self-tapping screws to a furniture door or on fasteners with a plastic compensator.
4. With a decorative profile.
5. On dowels silt nails.

• in a room where there is little light, place a mirror opposite the window. It will make it brighter;
• visually expand the room a large canvas;
• it is not advisable to place in the kitchen in the area of ​​\u200b\u200bthe stove;
• in the children's room, it is better to paste over the mirror with a protective film, if it breaks, then no one will get hurt;
• in the hallway it is convenient to place the canvas to its full height;
• the direction of the light should not be straight, otherwise the canvas will quickly fade.

Mounting without drilling

The fastest installation method without drilling the wall is adhesive. It is reliable, convenient and uncomplicated. It is necessary to use only special glue. It is sold in hardware stores and resembles liquid nails. The solution is applied to the back of the mirror and it is attached to the wall. It is necessary to follow the recommendations:

• Only a flat surface is suitable for mounting. If the wall is defective, then the product will be in a stressed state and may eventually burst;
• this method of fastening is not suitable for glossy surfaces and in the bathroom, because it is not resistant to moisture and will begin to peel off over time.

With the adhesive method, it will not be possible to completely remove the wall product. It is necessary to split it and dismantle it in parts.

Choose high-quality glue, well-known manufacturers - Krass, Zubr, Ravak.

How to hang the mount on the dowel

To install the canvas with a dowel, you need to drill a hole in the product itself. It's not easy, you need to have some skills. You can contact a specialist, and sometimes they can make a hole right in the store when buying. Further:

1. At home, attach the canvas to the desired surface, make marks at the attachment points. Using a drill, choose a nozzle for concrete, make a hole up to ten millimeters deep and fix the sleeves.
2. Next, attach the mirror and screw in the metal screws.
3. Install clamping elements.
4. Plugs are placed on top.

After finishing work, check all elements for strength. Everything must be sustainable.

If the work is carried out on a surface decorated with drywall, then you need to use special butterfly dowels. They have longitudinal ribs that prevent the dowel from turning, and the locking bolt holds and prevents the mount from falling into the wall.

Butterfly dowels are used for mounting products weighing up to twenty kilograms.

In the same way, the canvas is attached to a fishing line or rope. First, dowels, anchors or hooks are installed, and then suspended.

How to attach without nails

You can attach a mirror canvas to the wall without nails. You can use special liquid nails or special double-sided tape if the canvas is not heavy.

If you chose adhesive tape for installation, then it is better if its width is ten, fifteen centimeters.

The work is simple: liquid nails are applied to the back of the mirror with adhesive tapes at a distance of five, seven centimeters from each other. It is necessary to indent from the edges so that when pressed, the solution does not come out. Press for ten minutes. Prepare supports in advance so that they hold the mirror while it is fixed on the wall.

If you need to put the canvas on the door, then it is better to remove it from the hinges and place it horizontally for ease of installation.

The glue method is not suitable for the surface decorated with wallpaper. There is no guarantee that they will hold the product.

Cannot be glued to tiles either. When repairing, leave space for it in advance.

How to fix a mirror canvas without a frame with your own hands

A canvas without a frame can be fixed in several ways:

1. Glue. The work technique is the same as with mirrors with a frame: prepare the surface, level, remove dust, mark and install. This method is suitable for partial wall decoration.
2. profile. The canvas is inserted into a metal profile. So it is convenient to decorate large surfaces. Technique of work: surface preparation, installation of a profile, a silicone sealant is applied to the edge of the glass so that the mirror enters the grooves more easily. The canvas is inserted and pressed to secure. All other parts are installed by analogy.

It is better to entrust the installation of large mirrors to a specialist, as this requires skills. The method of installation depends on the size and characteristics of the canvas. The main method of fastening is with the help of hardware, special fasteners.

Sometimes the adhesive method, adhesive tape or decorative screws are used. When choosing materials for fastening, give preference to reliable and trusted manufacturers.

1. Use glue that has not expired.
2. For several days, do not touch the mirror so that it is completely fixed.
3. Properly prepare the surface: level and eliminate defects.
4. Fix a large mirror additionally mechanically. You can add small fasteners or make a small stand.

How to stick to a plastered wall

You can attach a mirror to a plastered wall in all ways.

How to stick to the wall with wallpaper

It is better to install a mirror on a surface with wallpaper using fittings, this will ensure safety.

For this, special fasteners in the form of brackets with linings are used. The canvas is attached to the staples, and the linings act as a seal.

Is it possible to hang a full-length mirror on the wall without fastening

You can install a full-length mirror using silicone sealant or glue, the work technique is the same as with the glue method.

Mirrors in the interior are an indispensable element of any apartment. Choose a place for installation in advance, carefully approach the installation process.

Useful video

Sometimes even seemingly simple tasks are confusing. For example: hang a mirror on the wall of the bathroom, hallway, dressing room, on the closet door. How if there is no frame or any other fasteners? In fact, attaching a mirror to a wall is a simple task. If you know the ways and methods.

Methods for attaching mirrors to the wall

During the repair or arrangement of an apartment, at home, sometimes it is necessary to fix a mirror on which there is no frame. Recently, this is the most popular design method. In general, there are five ways of fastening. They are selected depending on the type of base on which the installation will be carried out, and the area of ​​\u200b\u200bthe mirror surface. You can hang a mirror in the following ways:

• Glue to the surface using special glue or adhesive-sealant.
• Install special holders on the wall.
• Drill holes in the mirror, fix through them to the wall or furniture door. You can use ordinary self-tapping screws, but there are special fasteners with plastic compensators that prevent the fasteners from being “tightened” and prevent cracks from appearing.

• Install a decorative profile on the wall, lower the lower edge of the mirror into it, fix the upper one using one of the methods described above.
• Hanging on a special adhesive tape (mounting tape 3M).
• Fixing the mirror to the wall without drilling is possible only with glue or special double-sided tape. This may be required when mounting on a plasterboard wall, foam block partitions, and other materials with low bearing capacity. This method will also come in handy if you don’t want to spoil the tile, furniture door, etc. All other methods involve drilling holes.

At what height

The installation height of the mirrors depends on the place of installation and its purpose. In the bathroom, it is hung so that the middle of the mirror surface is at eye level. The growth of residents may be different, but on average the center is at a height of 160-165 cm from the floor.

When hanging in the hallway, mirrors are usually installed long and narrow. In them, a person should be displayed in full growth. To do this, its upper edge should be slightly above the head - 3-5 cm. When hanging on cabinet doors, its upper edge is used as a guide. If the cabinet is high, the mirror is also fixed a few centimeters above the head.

Mirror holders and installation methods

If after some time the mirror has to be removed/replaced, it is more convenient to install it on the holders. They are of two types:

• through;
• non-through (ordinary).

Non-through mirror holders are mounted on a wall or a door. Then the edge of the mirror is inserted into them. They can be attached almost close to the plane of the wall / door, or they can be carried out. In the second option, a gap from 5 mm to several centimeters remains between the wall and the mirror. This saves, if necessary, mounting on uneven walls.

When using ordinary holders, they are placed two at the bottom (if the mirror is small, you can put one at the bottom - in the center), two on the sides. When installing, carefully measure and set aside the dimensions. The lower holders are located strictly horizontally at an equal distance from the edge, and the side ones are placed on so that the edge of the mirror passes easily into their grooves. At the same time, it should not fall out even with a maximum shift to one of the sides. Usually the mounting distance of the holders should be 2-3 mm wider than the mirror, but there may be options - depending on the design of the holders.

Another option is two at the top and two at the bottom. In this case, the distance between the fasteners is also a couple of millimeters greater than the height of the mirror.

Through holders are used if there are holes for fasteners in the mirror surface. They can be made in a glass workshop. The holders themselves are ordinary self-tapping screws or dowel-nails with plastic lining and decorative caps of various shapes and diameters.

They are installed like ordinary dowels. First, holes for installation are marked (attach a mirror to the wall, make marks with a pencil or marker), holes are drilled, plastic plugs are installed for the dowels. Then fasteners with a plastic plug put on are threaded through a hole in the mirror surface and installed in place. The final stage is the installation of decorative overlays.

Mounting the mirror to the wall with glue

Not every wall is easy to install fasteners. For example, to hang something on plasterboard partitions or walls, you must either install fasteners in the place where the profile passes, or use special butterfly dowels. Each such mount can withstand about 20 kg. This is enough to mount a mirror, but not everyone wants to make holes in the wall. If the walls are even or the mirror needs to be installed on the door of a cabinet or other piece of furniture, it can be glued.

Which glue to choose

For installation, a special glue is used, which is called “glue for mirrors”. They differ from conventional ones in that they do not damage the amalgam coating. The important point is that the composition must have good adhesion (adhesion) to the surface on which you are going to glue the mirror.

Here are some popular formulations:

There can still be many compositions, the most common ones have been described. They quickly "seize", but the final drying occurs only after 72 hours or more.

What else can you stick to?

Neutral silicone sealant is suitable for gluing mirrors. It has excellent adhesive power and does not damage the amalgam. The cost of mirror glue and silicone sealant is about the same, the setting time is also about the same. When choosing, be careful: acidic (acetic) silicone sealants destroy the amalgam. Therefore, carefully read the composition and scope.

Any composition will do, but for attaching the mirror to the bathroom wall, it is better to take it with antifungal additives. This will prevent the development of fungi and mold. Also in wet areas, you can use silicone for aquariums. It is always made on the basis of silicone, neutral, fungi and mold do not appear on it. The cost may be slightly more expensive than conventional sanitary silicone.

Gluing technology

Attaching a mirror to a wall with glue is a simple procedure, but there are some things you need to know. Before gluing, the surface on which the mirror will be glued and its back side are cleaned of dirt, dust, degreased (wipe with alcohol, wash with soapy water and dry). A strip of glue is applied to the mirror with a “snake”, pressed against the wall at the installation site. The adhesive composition can also be applied pointwise - in a checkerboard pattern on all surfaces. Such a fastening of the mirror to the wall is reliable, but if replacement is necessary, it will have to be broken, the glue removed with a spatula, and a new one installed.

To hang it evenly, you can first draw a line on the wall along which to level the bottom or side edge.

When gluing mirrors of a large area, the technology changes slightly. Glue is applied to the leveled, primed and dried wall, distributed over the entire surface with a spatula with a very fine tooth. Such spatulas are used for. Do not confuse them with those that apply glue to the tile. They have too much tooth spacing. A mirror is glued to the prepared surface. It is carried and held with the help of special handles with suction cups.

Gluing order

Mounting the mirror to the wall with glue is considered reliable. This method is used in the bathroom if it is necessary that the entire finish be in the same plane. In this case, first lay out the tiles, then install the mirror. In this case, when installing the lower edge on the tile, it is necessary to put a gasket a few millimeters thick. The same gap remains on the sides and below. After the glue dries, it is filled with silicone sealant or grout, which was used for jointing. This gap will compensate for the difference in thermal expansion of materials - it is different for ceramics and glass. Also, this gap will prevent the appearance of cracks during shrinkage and movement of the house.

Since the glue does not dry immediately, the mirror may begin to slide down the wall. I don’t really want to keep it all 15-20 minutes, so measures are being taken to pre-fix it. To do this, before applying glue to the back side, glue several pieces of double-sided tape. It will hold the mirror until the glue dries.

Second option

The second option is to stick a bar on the wall, which will serve as an emphasis. Glue to choose one that is well peeled off the surface. If possible, you can tighten a few screws, etc. In general, any stop that will hold a non-lightweight piece of glass (1 square meter 4 mm thick weighs 10 kg) in place.

How to stick a mirror on double-sided tape

Mirrors that are small in size and weight can be glued on a special 3M double-sided adhesive tape. An adhesive composition is applied to the foamed polyethylene or polyurethane on both sides. The foam base compensates for some of the unevenness of the base, and also serves to cushion the base movements. The thickness of the base (adhesive tape) can be from 0.8 mm to 1.6 mm, the width of the tape is 6-25 mm.

Pieces of tape are glued onto a clean, fat-free base. It is distributed evenly over the entire surface. It is not worth sticking around the perimeter, it is better to glue all the pieces vertically in a checkerboard pattern at a distance of about 10-12 cm from each other. The tape consumption depends on the area of ​​the mirror; the experimental data are given in the table.

Consumption of double-sided foam tape for gluing mirrors

The final touch is to remove the protective film from the glued pieces and install the mirror in the place intended for it. Manufacturers of this type of adhesive tape give a guarantee for 10,000 gluing, so if it is installed incorrectly, you can fix it.

The fastening of the mirror to the wall with the help of 3M adhesive tape is reliable - this material is used in industry for gluing smooth fragments. This compound is not afraid of ultraviolet radiation, has a wide temperature range of use (from -40°C to +90°C). The adhesive composition perfectly resists the effects of water. The only limitation is that this adhesive tape sticks much worse on porous surfaces. But with ceramic tiles, laminated or adhesion is excellent. If in doubt, you can experiment - stick something heavy, then try to tear it off. Draw your own conclusion based on the results.