7087 0 0

How to assemble plasterboard niches: simple instructions, plus photo report

A very popular solution is a niche at the head of the bed.

Greetings, readers of my blog. Today you will learn how to make niches from plasterboard in the living room for a TV and other equipment. However, those structures, the assembly of which I will discuss later, can be installed with equal success both in the living room and in the bedroom, in the kitchen for the refrigerator and in other rooms where this is necessary.

A distinctive characteristic of the designs that I will discuss below is their simplicity and short assembly time. This means that you are guaranteed to cope with this.

A few words about niches and their assembly

Making a niche in the wall with your own hands using traditional building materials, such as brick, is very difficult, and the project will take a lot of time to complete. The situation is completely different if gypsum plasterboard is used as a building material. After all gypsum board, reinforced with two layers of cardboard, is simply cut and also easily attached to the supporting frame with self-tapping screws.

There are several varieties on sale plasterboard sheet. Some varieties are moisture resistant, others are ordinary and their price is more affordable. Drywall also differs in standard sizes, and above all, in sheet thickness.

What to choose from this variety so that the plasterboard niche is durable and looks good?

It all depends on the purpose for which the quick-assembled structure is being assembled. For example, a niche for curtains or a similar structure that will be used exclusively as a decorative element, can be assembled from thin gypsum board 6.5 mm thick. This material is widely used for cladding walls and ceilings, and therefore is not designed for significant mechanical loads.

If you are building a niche in the bathroom or a TV stand built into the wall, I recommend using a sheet with a thickness of 9 mm or more. Such dimensions provide the skin with high resistance to mechanical loads, which is important if plasterboard construction assembled under a large diagonal TV.

If plasterboard niches are assembled in rooms with excess humidity, it is advisable to use not ordinary drywall, but gypsum fiber sheet, which does not have surface paper reinforcement and is more resistant to moisture.

To assemble the supporting frame, you can use two types of materials:

• Wooden slats and bars - great solution if for some reason you are afraid or do not know how to work with assembly metal structures;
• Galvanized metal profile - allows you to quickly assemble lightweight metal structures of any complexity, the price of which will be slightly lower than the cost of wooden analogues.

Having compared the characteristics of the listed materials, to assemble the niche we will use a metal profile and gypsum board with a thickness of 6.5 mm, taking into account the fact that we will be assembling a decorative niche.

Installation of plasterboard construction

Now we’ll learn how to make a niche out of plasterboard with your own hands. The assembly instructions are as follows:

• We measure the mounting surface, in in this case wall, and, in accordance with the measurements and our preferences, we make a drawing;

• Using putty, we completely level the wall, since after installation is complete, it will be very difficult to level the niche openings;

• We grind the surface leveled with putty and coat it with a primer to prevent dusting;

• By using laser level(if this is not the case, we use a spirit level and a plumb line), in accordance with the prepared drawing, we apply markings on the mounting surface along which the profile will be attached to the wall;

• Using tinted laces, we connect the marking points into the perimeter along which the installation will be carried out;
• According to the markings required quantity profiles of suitable length;
• In the profile, according to the diameter of the prepared screws, we drill through holes at a distance of 20 cm from each other;
• We apply the profile pieces prepared in this way to the wall according to the markings made;

• Inserting a pencil into the holes, transfer the location of the holes to the mounting surface;
• Using the marks made, we drill holes to the depth and width of the dowel;

• We attach the perimeter of the sheathing to the mounting surface;
• Using cutting pliers, we install vertical posts that will be pushed forward relative to the wall;
• We strengthen all connections made with cutting pliers with self-tapping screws;
• We cut strips of drywall to width, equal to the distance, by which the front part of the niche will protrude forward from the wall;

• We fasten the prepared strips perpendicular to the wall along the perimeter of the niche;
• From the underside of the fixed strips of drywall, at a distance of no more than 50 cm from each other, we attach reinforcing jumpers that will make the end part of the structure more rigid;

• We also strengthen the sides of the frame with jumpers installed perpendicular to the wall;

• We cut and fasten the longitudinal jumpers;

I recommend that before you start covering the frame with plasterboard, you take several photos of the assembled metal structures. As a result, it will be easier for you to navigate the location of the profiles to which the gypsum board will be attached.

• Slice vertical stand and jumpers 20 cm long;

• From these blanks we assemble the front side of the niche frame, as shown in the photo;

• Similarly, we assemble the frame of the front part along the entire perimeter of the opening;

• We assemble the frame on which the LED strip will be attached;

• We completely cover the transverse opening of the side console with plasterboard;
• We completely cover the side console with a solid sheet;

• Then, using a hacksaw according to the markings made, we cut out a rectangle and open the opening;

• We sheathe the front edge of the frame on which the lighting will be mounted;

• We sheathe the lower part of the frame, which remained open;

• After the entire structure is assembled, we check that the seams between the pieces of drywall are cut at an angle of 45°, and also make sure that the heads of the screws do not protrude above the surface;
• Prepare the putty mixture;

• We glue the technological gaps with serpyanka and align the seams;
• We completely plaster surfaces covered with plasterboard;

• After the putty has completely dried, sand the surface and prime it for subsequent painting.

So, I told you how to make a niche in the opening of which you can install large mirror or push in a sofa, closet or other. I offered a photo report on the work done so that you can have general idea about how to work with drywall and metal profiles. Now that you know how to work, I suggest you familiarize yourself with examples of niches in the interior.

Examples of niches in the interior

I'll start with something unfinished, but very interesting project. The design you can see on next photo, certainly suitable for small spaces.

In the niche it will be possible to place a lot of modern household appliances, such as a thin TV, a small stereo system, etc. The only obvious drawback of this design is that it is very difficult to assemble due to large quantity small details.

The next photo shows a similar design, but with smaller dimensions and with built-in lighting. This technique is perfect for a bedroom or living room.

In this case, the niche is designed not as a functional, but as a decorative element on which lighting fixtures, photo frames and various trinkets can be placed. That is, a niche is, in fact, a large beautiful lamp in the interior.

This niche attracts decorative design made using wallpaper. Interesting layout scheme lighting fixtures. But, unlike the first example, this design is not functional, but serves decorative element interior

At the end of the review, I suggest you familiarize yourself with an example of a functional, well-made design, combined with a tastelessly implemented color scheme illumination. If you don’t pay attention to the eye-catching lighting, you can assume that such a niche will be an excellent addition to a children’s room or living room.

• Balcony Balcony and loggia repairs The homeowner’s dreams of a warm, well-appointed balcony or loggia are possible. You just have to want it and have the required number of banknotes, and your dreams will turn into reality. Combining a glazed, insulated balcony with a room and kitchen, turning the loggia into winter greenhouse or in a separate living space - all this can be done, and with your own hands. In this section of the site you will find step by step instructions on insulation and glazing, as well as installation and installation finishing balcony and loggia. They will help you carry out the work yourself or have it professionally assessed. renovation work, carried out by qualified builders.
• Bathroom Bathroom Renovation Taking hot bath you probably want to relax. Beautiful ceiling, luxurious walls and floors greatly contribute to this process. Few owners square meters» will refuse to use high-quality plumbing fixtures, earthenware plumbing products, household appliances and equipment. The publications collected in this section of the site will help you choose the ones that are right for you. household appliances, plumbing and finishing materials. Even in a Khrushchev-era building, this room, the area of ​​which does not exceed 2 square meters, with proper planning, can look great and meet functional requirements.
• Doors Entrance and interior doors - selection, installation, installation My home is my fortress. That's how I once described it English lawyer Eduard Kok feels safe in his home. But not a single outpost will be reliably protected without strong and sometimes even armored gates. A modern apartment like medieval citadel protection is required in the form of front door. We think that if you protect the entrance to the apartment with modern door block, a feeling of security will settle in you forever. But that's not all. Members big family Those who have their own personal space in the house instinctively want to isolate themselves, at least for a while, even from their relatives. And here there is no way to do without interior door. This section of the site contains publications devoted to the selection and installation of entrance and interior doors.
• Kitchen Kitchen renovation The kitchen is undoubtedly the most popular room in a modern apartment. We cook in it, and often eat food, unless, of course, there is a dining room in the house. While preparing culinary masterpieces, the housewife spends almost all of her time in it. free time. It is important that the necessary kitchen utensils, household items and equipment are at hand, and that the furniture is located so as not to hinder the movement of the cook. In this section of our website we will talk about finishing materials compatible with food and their application. Our step-by-step instructions will allow you to renovate your kitchen yourself or teach you how to supervise the work of a hired team of repairmen.
• Repair materials Selection of building materials and their description Materials for repairs is a capacious concept that implies thousands of names, hundreds of groups and dozens of categories of building materials. They help make wishes and dreams of comfortable, functional and convenient housing that meets all requirements come true. At the same time appearance and the quality of the elements of your home directly depends on the building materials you choose. In order not to regret wasted money when low-quality finishing falls off or loses decorative properties, purchase only materials for repairs tested by professionals. Do right choice The publications collected in this section of the site will help you.
• Windows Windows and balcony frames An important element of a modern apartment is the window. And the question of what it is made from plays an important role in ensuring comfortable stay in this apartment. After all, in addition to protecting the premises from atmospheric phenomena the window protects from street noise, especially when the room faces a busy highway. This section contains materials about the manufacture, appearance and features of windows and balcony frames for your apartment or private house.
• Floor Repair and finishing of the floor An integral part of the interior of a living space is the floor. Trouble-free living of household members is associated with the condition of the floor base and flooring. Even the health of the apartment's inhabitants directly depends on whether the floor is warm or cold. This is especially true for young children who spend most of their time playing on the floor. Modern building materials require absolute evenness of the base on which installation is planned. This section of the site combines publications in which we describe and show the process of preparing, installing and installing screeds, “ warm floors» and finishing.
• Ceiling Ceiling repair and finishing It is known that ceilings in modern apartments are not particularly smooth. The team of our site, drawing on vast experience, will suggest many ways to repair, level and finish them with finishing building materials. Tension - PVC and fabric, hanging - plasterboard, coffered, Armstrong and grillto, covered with wallpaper and painted. Each type of ceiling can become a real masterpiece. Step-by-step instructions, photographs and videos about the installation or installation of each type of ceiling are collected in this section of the site. Using these materials, you can easily do everything yourself or professionally supervise the craftsmen hired to carry out the work.
• Walls Construction, leveling and finishing of walls Having a roof over your head is of course great, but it wouldn’t hurt to rest it on strong walls built to last. In the apartments of block and brick high-rise buildings, they are naturally strong, but curved, like a Janissary's saber. Therefore, before finishing, they need to be leveled, and at the same time soundproofed in order to isolate themselves from noisy and reckless neighbors. And walls bordering the atmospheric environment also require insulation. In this section of the site we have collected descriptions of building materials and step-by-step instructions on installation, installation and fastening of finishing, as well as sound, noise and even waterproofing of walls.
• Toilet and sewerage Repairing a toilet The age of the Internet and urbanization, super speed and stress leaves virtually no room for privacy and the opportunity to calmly reflect on the complexity of life. Household chores also do not conduce to special philosophical activity of the brain. However, throughout the day, even a super-busy person finds time for solitude and calm reflection. This time is dictated by nature itself and the place for it, no matter how funny it may be, is the toilet. This section of our website contains publications about the arrangement of a toilet, sewerage system, the choice of plumbing fixtures and its installation.

The corners of the niche need to be covered with metal perforated corner for drywall and treat it with putty on top. After the first layer has completely dried, apply finishing putty, and on it any type of decorative finish you like.

It could be water-based paint, wallpaper, plaster or ceramic tiles.

A plasterboard niche will definitely decorate the interior of your home and will serve faithfully for many years.

In the repair and decoration of residential premises, a person’s desire for beauty is expressed in different ways - some want to decorate their home with finishing materials of incredible colors, others focus on designer furniture, and still others give preference to the structural elements of an apartment or house. In principle, both are partly right; all these methods are designed to improve the comfort of the premises and create coziness in them. But few people understand the fact that the greatest results are achieved exclusively in the process of using all methods at the same time - an apartment or house should have both good furniture, and quality beautiful surfaces walls, floors, ceilings, and, of course, decorative structural elements. We’ll talk about one of them in this article, in which, together with the site, we’ll look in detail at the question of how to make plasterboard niches with your own hands, what material is needed for this and what tools are used to create them.

DIY plasterboard niche photo

How to make a niche from plasterboard: frame construction

As with all plasterboard products, the frame is the main component of the entire structure - the shape, rigidity, reliability and even the appearance of the finished product depend on it. The final result depends entirely on how responsibly you approach the construction.

To build a niche frame from plasterboard, you will need three types of materials - these are ud guide profiles, with the help of which the structure is tied to the walls and the contours of the product are formed, cd profiles, designed to impart rigidity to the structure, and sheet thickness 12.5 mm (preferably moisture resistant, but Ordinary is possible).

How to make a niche frame from plasterboard with your own hands

Before you start work, you must clearly understand the full picture of what you want to get in the end - you cannot do without it. You may even have to draw a small sketch or a simple drawing that needs to be transferred to the wall in actual sizes. Drywall outlines drawn on the wall will really make the job easier. You will have to draw everything - every shelf and every curve. The more precise you are, the easier it will be to create it.

Guide profiles ud are installed along the drawn contours. They are secured using dowels and a hammer drill. There will be no problems with straight sections of the structure; difficulties arise when designing radial surfaces - to construct them you will have to learn how to bend smoothly metal profiles. In principle, this is not difficult - to obtain a smooth arc, the guide profile flanges are cut in increments of 50mm. If you don't want to do this work, then buy a ready-made arched profile, in which the cuts are already laid at the enterprise. In my opinion this is extra waste money - quite simply (within 2 minutes) cut with a grinder or even scissors.

How to make a niche from plasterboard photo

Okay, let's move on and give our frame volume. In accordance with the required depth of the niche and plasterboard shelves, it is also necessary to install guide profiles on the floor and ceiling - their ends, located on opposite surfaces, must lie in strict vertical level. Along with the volume of the structure, the front plane of the plasterboard niche is also specified, which must be perfectly flat.

DIY installation of a plasterboard niche photo

Now let's start forming the corners - as a rule, they are made from two guide profiles twisted together. Their shelves should be at an angle of 90° relative to each other. These corner elements are installed vertically and inserted into the upper and lower profiles, located respectively on the ceiling and floor. It is imperative to check the level of their installation in two planes at once (on the front and side surfaces). If everything is in order, then you can safely fasten the guide profiles and the corner post together - for this, self-tapping screws ø3.5mm by 7.5mm are used (popularly called “teks” or “fleas”).

Having given volumetric outlines to the frame, at the next stage a niche made of plasterboard with your own hands will require you to make it rigid. There is no point in relying on drywall to cope with this task. The frame is simply reinforced - for this purpose the cd load-bearing profile is used. It is cut into small pieces, the length of which corresponds to the distance between two opposite guides, inserted across them and secured with two ties on each side. Again, do not forget to control the level and plane of the resulting surface. Such reinforcement from load-bearing profiles cd on the side faces of the structure will need to be installed with shelves in different sides- in addition to giving rigidity to the frame, they also serve as a basis for screwing drywall. And in such products you have to twist it both inside and outside the niche.

Plasterboard niches in the wall photo

After the frame of the plasterboard niche has been strengthened, you can begin to form the shelves. The principle of their manufacture is almost the same as that described above. First, using ud, a level and self-tapping screws, the plane of the shelf is set, after which it is reinforced with load-bearing profiles, the shelves located up and down, every 300 mm.

Most craftsmen (including me) practice covering it with plaster while making the frame. Before installing the shelves, the entire internal cavity of the niche is lined with plasterboard - believe me, it’s easier to fix one large sheet than to distort its individual pieces. And thanks to this approach, the structure acquires additional rigidity.

You know golden rule drywaller? Fewer joints means fewer headaches later. This principle applies to all products, including plasterboard niches.

In addition, this approach to business will help to diversify this tedious and monotonous work a little.

Niches and shelves made of plasterboard photo

An important point in the process of creating decorative niches from plasterboard is its illumination and noise reduction - all this must be thought through at the stage of manufacturing the frame. You need to decide on the location of the lamps and lay the necessary electrical cables, and that's all interior space frame fill mineral wool. In principle, if you are satisfied with a ringing hum even when objects lightly hit the niche, you can refuse noise reduction - some people are fine with this phenomenon, but some are annoyed by it.

Decorative niches made of plasterboard photo

Installation of a plasterboard niche: framing the frame

This stage of forming a plasterboard niche is quite simple and does not have any special nuances, with the exception of a few, which we will consider later.

1. Firstly, this is the joining of individual parts of drywall. At the junction of individual parts sheet material it is necessary to install additional stiffeners, to which two separate pieces of drywall are screwed. If you ignore this nuance, then during operation you will get a crack in this place, even though high-quality sealing seams.
2. Secondly, the absence of which again leads to the appearance of cracks. At the junctions separate sheets drywall on their cut edges must be chamfered.
3. Thirdly, this is the step of installing screws. It is standard and is 150-200mm.

Well, in conclusion, I would like to pay a little attention to decorating the niche, or rather preparing for this process. If you think that you can refuse to putty, then you are deeply mistaken - a plasterboard niche does not require putty only in one case, when it is tiled or tiled. It is this stage of manufacturing a plasterboard niche that is the most labor-intensive - you will have to install a huge amount perforated corners, place dozens of meters of reinforcing mesh in the corners and joints and properly fill even the smallest cavities.

If you know how to make a niche out of plasterboard with your own hands, you can create one in any room of your apartment. original design at a favorable price.

Since working with drywall is not difficult, and it is inexpensive, this material is optimal for carrying out finishing works.

There are many options for finishing plasterboard, and niches are one of the most popular.

Particularly parts can be found niche for brick wall, which is the most difficult to work with.

Niches are not only attractive, but also quite practical - you can build in them, for example, shelves in a toilet for storing hygiene items, or place a cabinet or other furniture there, depending on the size of the structure.

The manufacturing process is also not too complicated, so you can easily do it yourself.

In the article you will receive instructions on how to make a niche from plasterboard, and you will be able to bring it to life in your apartment.

The process of working with drywall itself does not pose any particular problems, but you need to be more careful in preparation, and then you will not have the question: how to make a niche in the wall?

First of all, you need to decide on the design and structure of the niche, as well as its purpose.

Decorative niches can often be found in the living room or bedroom - in such rooms you can install shelves, or simply paint the structure.

More functional shelves can be found in the bathroom or toilet - cleaning products and hygiene items can be placed there.

Sometimes niches in the wall are made for a dressing room or wardrobe - such a design should be of a more impressive size, and it is best to make it in the corridor or on the balcony in order to save as much living space as possible.

There are also devices for windows and decorative niches for curtains, which also act as an original decorative element.

Once you have decided on the size and shape, you need to make a frame for the niche.

Whatever type you choose: a niche for a wardrobe, functional shelves in the toilet, a box for curtains or just a decorative element, a frame will be necessary.

A properly made frame will provide the structure with stability, reliability and an attractive appearance.

To make it, you will need guide profiles, which are needed to secure the structure to the walls and give the product the necessary contour, and profiles that give rigidity to the structure, as well as the drywall itself.

To create the structure, sheets measuring 12.5 mm are suitable. You can buy both regular and moisture-resistant material.

On a brick or other wall to which the structure will adjoin, it is better to draw the contours of the future niche to make it more convenient to work.

Draw all parts of the structure: shelves, if provided, additional elements under a wardrobe, etc. It’s better not to be lazy and do everything carefully, then installing the structure yourself will be easier.

You need to align the guide profiles along the contours and secure them with dowels.

Where the sections are straight, the work is simple; it will be more difficult if you are making a curved frame - then you will have to smoothly bend the metal profiles with an arc.

This can be done by cutting the material in increments of 50 mm, or by purchasing a ready-made structure of the desired shape if you do not want to work on it with your own hands.

After installing the profiles, you need to make the frame voluminous in accordance with the size you chose for the depth of the niche.

Guide profiles must be fixed to the ceiling and floor so that their ends are positioned strictly vertically.

In addition to the volume, at the same time you need to make the front plane of the niche, which needs to be completely flat.

The corners are made from twisted guide profiles. The shelves should be located at 90 degree angles to each other.

Corner elements must stand vertically and be connected to the upper and lower profile and located on the ceiling and floor.

You need to check how correctly they are installed in two areas: on the front and side surfaces.

After this, the profiles need to be fastened to each other and to the corner post using self-tapping screws.

Installation of shelves, cladding, design

After you have made the frame voluminous and rigid, you need to make shelves.

The technology for making shelves in a wardrobe and a decorative niche is the same and takes place in several steps: the first step is to set the plane of the shelf using a level and self-tapping screws.

After correct location you need to strengthen the shelf with the help of load-bearing profiles (this is especially true if you are making a wardrobe, where the load on the shelves will be slightly higher).

We cover the frame with plasterboard at the same time as its manufacture - it is more convenient and faster to work with your own hands in this way.

Before starting installation, all inner part niches need to be sheathed with plasterboard - it is easiest to do this with one continuous sheet than to sheathe cut materials, keep this in mind.

In addition, a structure covered with solid plasterboard will be more rigid.

The fewer joints in your frame, the easier it will be to cover it with plasterboard - this applies to all products made from this material: decorative niches, devices for wardrobes, boxes for curtains on the ceiling, etc.

A decorative niche, shelves in the toilet or even a wardrobe can be made with lighting - for this you need to carry out all the necessary communications at the stage of installing the frame.

If you want to make sound insulation, then you need to put mineral wool into the voids of the frame.

The location of the lamps may differ depending on the type of structure: decorative niches are most often sheathed around the perimeter, in the wardrobe you can install shelf lighting, and the curtain box can be trimmed with lamps on top.

You can reflect the lighting system in advance in the diagram, so that later it will be easier to install it yourself.

Sound insulation is an optional step, but if it is not done, then you need to be prepared for the fact that at the slightest contact with objects, the drywall will emit a hum - this is not too noticeable if it is decorative or for curtains.

However, if you are doing it, for example, under shelves in a toilet or a wardrobe, then sound insulation is still desirable.

Covering the frame of a niche with plasterboard occurs in several stages: first you need to join the individual parts of the plasterboard.

Where the parts of the material are connected, you need to make additional stiffening ribs, onto which you then screw a separate piece of drywall.

If this is not done, then over time the material will crack, even if the seams are properly sealed. Lack of jointing also leads to cracks.

To avoid them, where the sheets of drywall are connected, you need to chamfer. After this, you need to install self-tapping screws measuring 150-200 mm.

The last stage is decoration and finishing. In order for the paint or other coating that you have chosen to finish the niche to adhere well, the surface must first be treated with putty.

You can refuse it only if you are going to veneer it with stone or tiles. Often, puttying the surface is a more labor-intensive step than assembling, installing and covering the frame.

It is necessary to carefully process the corners and joints, and also to seal even the smallest irregularities in the drywall with putty.

Drywall can be finished with almost any material. The most common option is to simply paint the surface in the color you want.

Niches for curtains can be made contrasting, and shelves in the toilet, on the contrary, can be made to match the color of the finish. A sliding wardrobe is most often painted to resemble wood, and the inside can be covered with wallpaper to match the color of the room.

Often, plasterboard niches are installed around a brick wall - it can be in the hallway or bedroom.

In this case, the wall can be left as is, especially if the room is decorated in a loft style or similar, and the niche can be painted to match the color of the wall, or painted with patterns.

Working with drywall is easy not only in creating niches, but also in finishing the material, so doing the decoration yourself should not be difficult.

With the help of plasterboard you can give the apartment unique design, creating in different rooms niches for curtains, under windows, wardrobes, shelves in the toilet or hallway, decorative niches for TV and other equipment, etc.

There are a lot of possibilities for working with drywall, and its simplicity makes it ideal material to create designs with your own hands.

Plasterboard niche - great way transforming space without any major changes. And built-in LED backlight will do something similar lightweight design and airy.

Plasterboard slabs can be called one of the best inventions intended for construction. Let us note that currently not a single repair can be done without this material. Thanks to drywall, there is an excellent opportunity to realize the most original ideas in interior design: hanging multi-tiered or single-level shelves, window slopes, various kinds of niches. In addition, plasterboard is very often used for leveling walls and zoning rooms using partitions.

Main types of drywall

Drywall is absolutely harmless to humans, non-toxic building material. It is produced in the form of slabs, the basis of which is gypsum, lined with special cardboard. The produced material has the dimensions established by the standards: width 120 cm and length 250-300 cm. The most common three types of plasterboard: arched, wall and decoration material ceiling surface. Drywall can be divided into types according to its area of ​​application:

• GKL is universal material. It is used only for decorating dry rooms. The color of the plate is gray with blue markings.
• GKLV can be used for finishing work in rooms with high humidity levels. The color of the plate is green with blue markings.
• GKLO is building material having increased level fire resistance. The color of the plate is gray with red markings.
• GKLVO is a material that differs high level resistance to moisture and open fire. The color of the plate is green with red markings.

Today, various types of niches and partitions made of plasterboard are especially popular. With their help, you can divide the room into certain zones. Let's take a closer look at how this is done and which options are most in demand.

Drywall niches: purpose and features

Niches, which can easily be made from plasterboard, are not only a beautiful decorative element that can add zest to the interior, but also a convenient and functional place for storing various kinds of things and accessories. By decorating the niches with special lighting, you can advantageously zone the room, and at the same time also save significantly on the purchase of furniture.

Currently, a very popular option is to decorate a blank wall with niches for installing a variety of household appliances and decorative fireplace. Thanks to this solution, the question of purchasing very expensive and high-quality cabinet furniture simply disappears. To create a complete and complete interior in the living room, it is enough to organize a niche for installing a TV and home theater with lighting and shelves. To complete the interior solution, all that remains is to install a cozy sofa and decorate the room with suitable textiles.

No less effective solution There will be the creation of a special niche for installing a hidden cornice. The peculiarity of the design is that a person entering the room will only see the curtains falling from the ceiling. All unnecessary elements will be hidden from his eyes. Thus, with the help of niches you can hide almost any defects in the room and create an original and unique interior.

Another purpose of the niche is as the head of the bed. Original design walls in a niche will allow you to create a unique and unique interior bedrooms.

The niche can be rectangular, square, round or in the form of an arch - special arched plasterboard is used for such work.

Zoning premises using drywall: advantages

As mentioned above, quite often drywall is used to zone rooms. For example, one of the most common options today is to decorate areas in a children's room with partitions that divide it into two parts: one for work and play, and the second for sleeping. To ensure that the partition does not take away part of the lighting between zones, it can be made with niche shelves in which toys, the child’s favorite books and other accessories will be stored.

In the same way, almost any room can be divided into zones: a living room - into a relaxation area and an area for receiving guests, a children's room, in which several children live, - into zones with their personal space, decorated in accordance with the tastes of the kids.

How to make a niche out of plasterboard with your own hands

If you decide on our own build partitions or niches from plasterboard in your house, in this case you will need:

• the building material itself (plasterboard of selected thickness). Please note: if a significant load is planned on the erected walls, then twice as much material will be required, since it will have to be fastened in two layers;
• metal knife for working with metal profiles;
• guides ( wooden slats or metal profiles, most often a galvanized profile 50x25 mm is used),
• level,
• fastening material - metal screws and dowels for attaching the guides to the wall;
• drill;
• screwdriver;
• spatula, putty and perforated tape for sealing joints and screw heads.

Please note that choosing plasterboard for decorating a room must take into account its performance characteristics. For example, for a living room or children’s room, an ordinary universal composition, but to equip niches or partitions for a kitchen or bathroom, you will need moisture-resistant plasterboard.

The first step is to mark on the wall where exactly the niche is planned to be placed - the plan is best perceived visually. After this, measurements are taken to calculate all the materials.

Throughout the entire work, you must use a level to determine the plane:

To strengthen the structure, the profile must be fixed as often as possible. The profile is attached to each other using metal hangers and a “crab” type connection.

The next stage is working with drywall. You can find out how and how to cut drywall here:. Attach the cut parts to metal frame from profile.

Be sure to frame all corners of the niche with a metal or plastic painting corner. We draw conclusions for sockets and wires.

Now the entire area of ​​drywall needs to be puttied. Special attention pay attention to the joints - glue them with perforated tape or serpyanka mesh for strength, and also putty on top. For this purpose it is used finishing putty(you can buy ready-made).

The next stage is priming and painting our niche. Although it all depends on the chosen design: the inner surface can be either painted or decorated with a mirror, wallpaper or mosaic.

How to decorate a wall inside a niche

Any plasterboard construction needs design. It could be regular paint or hand-painted - it all depends on the creativity and imagination of the owner.

It is also worth considering that the choice finishing material for a niche will depend on its functional purpose.

What items are planned to be placed here? If we are talking about technology, for example, a TV, then in order to avoid eye fatigue, the surface should not be too pretentious or distracting.

If a niche is created to accommodate a home library, books and magazines, then it is necessary to choose more practical finishing materials that do not collect dust and are easy to clean.

For a niche that serves as a decorative element, decorated with figurines or valuable objects, the design must be selected accordingly - more expensive wallpaper that attracts attention, Venetian plaster or mirrors.

The niche at the head of the bed can also be covered with wallpaper or covered with decorative plaster.

Wallpaper

The most simple solution The niche will be decorated with wallpaper. You can choose wallpapers with a similar shade and simple pattern, as well as contrasting or bright ones.

Textile heavy wallpapers with ornate patterns will create a feeling of luxury and chic, while plain ones can become a pleasant accent, adding specific color into the interior.

Decorative plaster

Good quality plaster will definitely be more practical, and Venetian plaster will also add a touch of luxury. Plaster mixture allows you to create a certain texture, but at the same time remains more resistant to cleaning than wallpaper.

Decorative brick or stone

One of the most current solutions to date. Brick in a niche will add rigor and brutality to the interior, especially if you choose modern minimalism or loft.

Mosaic or tile

You should not be of the opinion that ceramic tiles or mosaics are only appropriate in the kitchen or bathroom. This one is durable and practical material gives room for creativity to any designer. Glass mosaic or matte porcelain tile with wood texture - you just need to choose suitable option for a specific interior.

Laminate or wood

It is also one of the popular solutions when choosing material for decorating a niche. Especially if the interior contains details with the same texture and color.

Mirror

A mirror sheet or tile will visually expand the boundaries of the niche, creating the feeling that there is a continuation of the room behind the wall. Mirrors will look especially advantageous in a niche that imitates a fireplace.

Drywall niche - photo of interior ideas

Thanks to such an easy-to-use material as plasterboard, you can create niches in our apartments different shapes- not only rectangular, but also fancy curly, round or broken lines. For example, a corner niche from drywall will do small rooms where every square centimeter counts. A niche with shelves will complement the cabinet for the TV area, and in the bathroom it will serve as the main wall for attaching glass shelves. The photos we offer will serve you as an excellent example of how you can make a plasterboard niche in your apartment: