Production of rattan furniture - what you need. We weave artificial rattan furniture with our own hands: the advantages of creating it. Pros and cons of rattan garden furniture

Wicker furniture has always been in demand and testified to the wealth and refined taste of the owners. Its cost is quite high, since the products are made by hand and are original in their design. Natural rattan is considered the most popular material for its manufacture, but it is quite expensive and not everyone can afford it. To make rattan furniture more affordable, an artificial analogue was invented, which turned out to be much cheaper and stronger than natural one.

Wicker furniture has always been in demand and testified to the wealth and refined taste of the owners.

From artificial rattan They also make amazing designs: houses for cats and indoor dogs, flower stands and other products.

After its invention, specialists began to quickly master it, and in a short time, artificial rattan products appeared on the furniture market, characterized by elegance, comfort and durability.

To make rattan furniture more affordable, an artificial analogue was invented, which turned out to be much cheaper and stronger than natural one.

Home craftsmen immediately appreciated the advantages of the new material, and those who did not yet have weaving skills looked with envy at the amazingly noble and beautiful products. But there is nothing in our life that cannot be mastered. Therefore, more and more often, novice home craftsmen want to learn how to weave furniture on their own. Practice shows that the science of weaving is within the capabilities of everyone, especially since it is so durable and comfortable material, like artificial rattan, which is most often used in wicker furniture, today can be purchased relatively inexpensively.

Home craftsmen immediately appreciated the advantages of the new material, and those who did not yet have weaving skills.

To make artificial rattan furniture with your own hands, you will need the material itself for the work.

Making wicker furniture from artificial rattan at home has its advantages:

• significantly saves the family budget;
• has a long service life;
• low weight of products;
• with external lightness and delicacy, it retains strength and reliability with careful handling;
• not subject to temperature changes and exposure sun rays;
• does not contain harmful or toxic components;
• hypoallergenic;
• easy care.

But there is nothing in our life that cannot be mastered.

Important! Myself light material, convenient for transportation, attractive from an aesthetic point of view, has high strength, and is not subject to deformation from moisture.

Therefore, more and more often, novice home craftsmen want to learn how to weave furniture on their own.

It must be taken into account that the material has different lengths and differs in material thickness and width.

It is convenient to work with artificial rattan, as it is flexible and comes in the form of long threads, which does not require constant gluing or other methods of connecting small parts of the material.

Making wicker furniture from artificial rattan at home has its advantages.

Deciding on design and construction

Material provides ample opportunities to implement design ideas. It can be used to make products of varying complexity, including leisure sets consisting of wicker chairs, a sofa, and a table of an original shape. Interesting bookcases, bedside tables, chests, ottomans. Amazing structures are also made from artificial rattan: houses for cats and indoor dogs, flower stands and other products.

Significantly saves the family budget.

It is available with a smooth and ribbed surface and is available in a variety of colors and textures.

Attention! With all the breadth of choice, a novice craftsman should start with the simplest products that allow him to master weaving skills. The easiest way to start is by making an ottoman: an elementary design, the opportunity to master weaving skills, and in case of failure, it is easy to remake the defect, which turns out to be preferable in the first stages of mastering the skills of weaving from artificial rattan.

With external lightness and delicacy, it retains strength and reliability with careful handling.

In addition, you cannot overdo it so as not to overtighten one of the sides, otherwise the result will not be satisfactory.

Required materials

To make artificial rattan furniture with your own hands, you will need the material itself for the work. In this case, you can select the desired configuration, taking into account the fact that it is available in the form

• long stripes
• braids
• rod
• imitation tree bark.

Not subject to temperature changes and exposure to sunlight.

On initial stage work, when a simple product is selected for manufacturing, a minimum of equipment will be required for weaving.

It must be taken into account that the material has different lengths and differs in material thickness and width. It is available with a smooth and ribbed surface and is available in a variety of colors and textures.

The material itself is lightweight, easy to transport, and attractive from an aesthetic point of view.

But if you want to make it even more elegant, you can use bright soft blankets and pillows as decoration.

Required Tools

At the initial stage of work, when a simple product is selected for production, a minimum of equipment will be required for weaving. To get started, you will need:

• stapler - for attaching rattan to the base if a wooden base is used;
• small pliers;
• small hammer;
• a convenient sharp knife or cutter;
• soldering iron for soldering connecting elements of the material or glue.

It is convenient to work with artificial rattan, as it is flexible and comes in the form of long threads.

In order for the manufacturing process to proceed without unexpected interruptions, it is necessary to take into account the recommendations experienced craftsmen.

Manufacturing process: step-by-step instructions

In order for the manufacturing process to proceed without unexpected interruptions, it is necessary to take into account the recommendations of experienced craftsmen who suggest organizing it in a certain order:

1. Prepare the structure chosen as the base, wooden or metal. It can be made with your own hands, but you can also use a ready-made one.
2. To make it convenient to work, install the guides on the base and secure them with self-tapping screws, a stapler or bolts.
3. Level the surface of the frame by cutting off the protruding rods with scissors.
4. The next step is weaving on the frame. Its type is chosen according to your taste and depending on the selected raw materials.

1. Excess material is removed after completion of the work, and the ends are “masked” on the finished product.

The material provides ample opportunities for the implementation of design ideas.

In order for the product to turn out smooth, durable and neat, when weaving, it is necessary to constantly check how the rows of rattan “lay down”.

Attention! In order for the product to turn out smooth, durable and neat, when weaving, it is necessary to constantly check how the rows of rattan “lay down”. In addition, you cannot overdo it so as not to overtighten one of the sides, otherwise the result will not be satisfactory: the product will turn out to be lopsided and it will be impossible to use it.

Interesting bookcases, bedside tables, chests, ottomans.

Wicker furniture made from artificial rattan looks rich, it is elegant and graceful.

The final stage is decoration

Wicker furniture made from artificial rattan looks rich, it is elegant and graceful. But if you want to make it even more elegant, you can use bright soft blankets and pillows as decoration.

With all the breadth of choice, a novice craftsman should start with the simplest products that allow him to master weaving skills.

The product will be lopsided and will be impossible to use.

VIDEO: Making artificial rattan furniture

The fashion for light and beautiful pieces of furniture made of wicker or rattan is experiencing a new rise. Surely you want to diversify your interior with something special. Do-it-yourself wicker chairs, tables or chairs are what you need.

Features of wicker furniture

The history of wicker furniture goes back thousands of years. Archaeologists often find it all over the world. Weaving from wicker and others natural materials plant origin was widespread in populated areas located near bodies of water. Proximity of suitable raw materials in large quantities contributed to the fact that most of the products used in everyday life were made by people themselves.

Wicker furniture was used more often in the homes of the poor, as the cheapest and affordable option. But quite quickly wealthy people and representatives of the nobility appreciated its beauty, functionality and possibilities of use in the interior. Since then, not only single craftsmen, but also entire artels, and subsequently factories, have been engaged in weaving. There are even special schools wicker weaving.

Fashion in Russia wicker furniture Prince Golitsyn brought it. Often traveling abroad, he appreciated the properties of wicker products and created an entire workshop for their production on his estate.

Wicker furniture can be a real work of art

Nowadays wicker furniture is very popular. Making it becomes a favorite hobby for many, even generating income. In addition, it has many advantages. These include:

• low cost, especially compared to products from other natural materials;
• light weight, thanks to which you can easily move the furniture anywhere without outside help;
• environmental friendliness: wicker interior items not only look beautiful, but are also safe for health and do not have a specific odor;
• easy care: most often it is enough to wipe off dust from the furniture with a cloth dipped in water;
• durability, subject to high-quality weaving, performed according to all the rules.

True, there are also disadvantages that need to be taken into account. Furniture woven from wicker and similar materials is not resistant to the vagaries of the weather. In heavy rain it gets wet, and with prolonged exposure to sunlight and high temperature may dry out. This leads to loss of shape and disruption of the weave. Repairing a damaged product is very difficult. Therefore, it is not recommended to keep such furniture in open areas for a long time.

Nowadays wicker furniture is very popular, and many people are starting to make it at a professional level.

Types of wicker furniture

According to the structure and manufacturing principle, wicker furniture is divided into several types:

1. Frameless products. In them, the rigidity of the structure is ensured by strong stick-ribs.
2. Frame furniture, in which the body is made of durable material, such as steel rods. Metal parts the frame is braided with vines or other suitable material.
3. Wooden furniture in which the supporting frame is made of wooden sticks that impart rigidity and durability.

Pieces of furniture made of wicker or rattan - photo gallery

It is impossible to imagine a summer garden without comfortable pieces of wicker furniture A rocking chair is the dream of anyone who loves comfort Even a bed and an entire bedroom set can be woven from wicker or rattan A cozy basket chair with a low base will appeal to kids and pets It's good to relax in a comfortable rattan hanging chair after have a hard day An airy openwork set of a sofa, armchairs and table will decorate any dining room

Video: wicker furniture made of wicker and rattan in the interior

Weaving materials

Several types of materials are used in the manufacture of wicker furniture. Each of them has its own characteristics:

1. Willow vine is a fairly flexible and resilient material, but short-lived. Traditionally, common willow, broom, almond or goat willow (willow) are used. Some varieties are used for coarse weaving, others for finer work.

   Willow vine is the most common material for weaving

2. Rattan is a flexible and durable material from which interior items are most often woven. This liana-like plant is found in Asian countries and on the islands Pacific Ocean. Due to its high resistance to moisture and wear, furniture made from it is ordered for baths and saunas. There is also artificial rattan - a synthetic material that is a polyurethane tape. It is more pliable and easier to handle than natural wicker or rattan, and costs much less, so it is absolutely universal for wicker furniture.

   Artificial rattan is very durable and flexible, it is practically not afraid of moisture

3. Banana leaves (abaca), 75–350 cm long, were previously used to make ropes and ropes. Over time, their strength and lightness were appreciated, and the material began to be used for weaving furniture.

   Banana leaves are often used in furniture weaving

4. Bamboo, due to its rigidity, is not very common as a material for making furniture: it is difficult to weave. More often you can find decorative items made from bamboo shavings.

   Bamboo is very hard and difficult to weave

5. Water hyacinth is used because of its resistance to moisture and sunlight. But the technology for preparing the material is very labor-intensive: it needs to be collected, dried, compressed and rolled into rolls. The process will take six months, so it is better for beginners to pay attention to something simpler, for example, artificial rattan.

   Products from water hyacinth are not afraid of moisture and sunlight

6. Seaweed. Furniture made from this material is not very durable, but it looks impressive. Most often, dried seaweed in the form of ribbons is used to braid furniture frames.

For weaving, you can take what is at hand - bird cherry, hazel, raspberry, alder or even nettle. The bird cherry vine is more pliable to work with: it is plastic, flexible and easily cleared of leaves and shoots.

Frame materials

To make a stable structure that will last a long time, we recommend using ready-made frames of furniture - chairs, sofas, tables, armchairs. They can be metal, wood, polyurethane foam. The principle of operation will be to braid the base, and you will have several advantages:

• saving of basic material;
• simplification and acceleration of the weaving process;
• additional strength of the product;
• increasing the service life of furniture.

How to choose the right material

Before preparing materials for weaving, read the recommendations from professionals in this craft:

1. Before you cut willow twig, bend it tightly or even wrap it around your finger. Only those rods that do not break during such manipulations are suitable for cutting. They must be smooth, clean, without any defects.
2. Choose the longest rods without branches. The most suitable shoots are those that grow directly from the ground or from the lowest branch. As a rule, these are young annual shoots without knots and side branches, in place of which creases can form.
3. Take a closer look at the cut core: its diameter should ideally be less than 1/3 of the diameter of the entire cut. If the core is thick, red or brown, discard the rod.
4. Make the cut at an angle sudden movement. Use a very sharp knife.
5. For the frame, choose thick rods that were harvested in late autumn or winter. Make decorative elements from branches collected in the spring during sap flow.
6. For shoots, good taper is very important, that is, the ratio of the diameters of the branch at the base and at the tip along the entire length. The norm is considered to be a thinning of the branch by 1 mm every 20 cm.

You can prepare the rods yourself. If you don’t have enough skills, time or desire, then purchase ready-made materials in specialized stores. You can use twigs with bark (green) or without it (white). It is easier for beginners to work with the first ones: they are more flexible. Cleaned branches can be given any shade or color using chemicals:

• hydrogen peroxide for a snow-white color;
• manganese solution - brown;
• iron sulfate - grayish;
• aniline dyes for dyeing in any chosen shade.

Bark-cleaned twigs turn white

Tools for work

Weaving from wicker is a labor-intensive task that requires scrupulousness. You just can't do it with your hands. You will have to stock up on a whole set of tools:

• special knives and garden shears for cutting and trimming twigs;
• ladder for sorting raw materials;
• large capacity, tank for soaking the rod;
• boiler for cooking and bleaching workpieces;
• squeezers for cleaning twigs from bark;
• splitters for dividing rods into parts;
• shof for obtaining planed strips;
• shmyg for figure processing, notching;
• iser for aligning rows;
• jigs for straightening frame blanks;
• pruner;
• measuring accessories - ruler or tape measure;
• pliers;
• saw on wood.

Weaving patterns and methods

There are several ways to weave furniture and interior items. Each combines decorativeness and functionality.

Weaving patterns - table

Weaving methods - photo gallery

This simple weaving pattern is easy for beginners to master. The edges of the product are often braided Rope weaving is created from two or more rods Openwork weaving will give the product lightness, airiness and transparency. Using checkerboard weaving, you can decorate furniture with a three-dimensional pattern.

Making furniture from wicker or rattan

First, the vine needs to be properly processed to give it the necessary flexibility and strength. This process will be needed no matter what product you choose to weave:

1. Place the harvested vines in a large container of boiling water. Keep the material in conditions of moderate boiling water for at least an hour. After this, remove the bark.

   Prepared vine rods need to be cleared of bark

2. Thick rods used for frame base, fix them in special devices to give them the desired shape. For example, a rocking chair will need rounded runners. To achieve this look, lay a thick thick rod along a round object and secure it.

   Thick rods are given the shape necessary to make the frame of the selected product

3. Use a splitter to split thin vines into 3–4 parts. This is easy to do: make a cut at one end of the rod sharp knife, insert the hammer there and hit the back of it with a hammer. The sharp end of the tool will go along the entire length of the vine.

   Thin vines are split into pieces using a splitter

4. The resulting parts of the rod are called shanks. Pass them through a press until they look like braided ribbons. You can also use a special device for planing vines.

   To obtain braiding tapes, use a special device or wood press.

5. Thick rods in a fixed form and place the tapes in drying chamber, leaving there for three days. There they will dry and take the desired shape.

   The prepared parts of the future chair need to be dried

Simple weaving of the frame with artificial rattan

It will not be easy for a beginner to weave something serious from natural materials right away and without mistakes. We suggest starting your training with simple things - stools, tabletops coffee table, covers for the ottoman - and use artificial rattan. Simple rectangular shape braided like this:

1. First of all, make a frame from strong boards. It consists of 4 legs and a frame. You don’t have to bother with treating its surface: the weaving will cover the entire product completely.

   The frame of the future product is made from boards

2. On the upper part of the product (seat on a stool, table top or ottoman cover) make reinforcement strands. You can make them from rattan by braiding or twisting, or use a thick ribbon with minimal tension. Secure the bundles with a stapler and secure them to the screws with a block for strength.

   Strengthening tourniquets are pulled onto the seat of a chair or ottoman.

3. Now start braiding. It is better to use dense weaving in a checkerboard pattern. Lay the rattan strip in one direction, alternating 2 short pieces with one long one. In this case, fasten the short ones with a stapler to the seat, and the long ones to the crossbar.

   Rattan strips are laid and secured to the frame in the required sequence

4. Having laid the first layer of artificial rattan, begin to weave ribbon into it. Alternate 1 long and 2 short sections. For convenience, use ribbons different colors. Each subsequent ribbon is woven with a shift of 1 ribbon to the left. Be careful, it is easy to get confused in the sequence at this stage.

   Rattan is woven into the base, choosing a simple pattern

5. Secure the remaining ponytails and trim off any excess tape. The seat is ready.

   At the end of the work, secure the remaining tails and remove excess tape.

6. Now let's move on to the sides. Take one long piece of ribbon and weave it around the sides in a circle. The length of the tape is difficult to determine, so if it runs out in the middle of the job, attach another piece to it using a soldering iron. The beginning of the tape can be attached in any corner under the vertical strip.

   The sides are braided in a circle with one long ribbon

7. Braid the product to the very bottom in a circle. When finished, carefully bend the remaining tails inside the product and cut off the excess.

   You can braid not only the seat, but also the sides and legs of the chair

8. You don’t have to braid the sides all the way to the bottom, but leave the legs. Braid them separately according to the same pattern. Add rattan strips to the legs in a vertical direction, sliding them under the braiding of the sidewall and securing with a stapler. Braid the leg in a circle.

   You can weave a rocking chair from a vine

   Then they braid it with flexible rods using glue for more reliable fastening. When the main part is done, rounded runners are attached. Make sure the structure is stable: rock the chair and check that it moves easily and does not tip over. The finished product is coated with furniture varnish or painted.

   How to make a rocking chair from wicker - video

   Vine braiding of a chair frame

   The frame can be purchased at finished form or make it from sticks 15–20 mm thick. Due to weaving, the frame will not only take on a beautiful appearance, but will also be significantly enhanced. Stages of making a chair:

   1. Fix racks made of rods 15–20 mm thick to the frame.
   2. At the seating area, make a continuous weave of thick rods with a diameter of 10 mm.

   You can buy a chair frame in a store or make it yourself

   Simple garden sofa

   A light openwork sofa made of wicker will decorate your veranda or garden.

   A wicker sofa, in comparison with a carpentry one, has two additional middle legs. They are attached to the structure frame between the side front and rear legs in order to protect the furniture from sagging and breaking the seat frame elements.

   For the frame you will need sticks 20–30 mm thick of different lengths:

   • 100 cm and 45 cm, 2 pcs. - for the seat frame;
   • 40 cm - 3 pieces (front legs);
   • 65 cm - 2 pieces (rear side legs);
   • 75 cm - 1 pc. (posterior middle leg);
   • from 125 cm - 1 pc. (for the upper arched part of the back).

   To give additional strength and stability to the frame, stiffening ribs are attached between the legs at a distance of approximately 20 cm from the seat. To do this, you will need 3 sticks of 45 cm and 2 sticks of 100 cm. All elements are attached using self-tapping screws.

   Operating procedure:

   
   

   How to weave a chair from willow vine - video

   Finishing wicker furniture

   When a chair, table, sofa or other item is ready, all that remains is to give the item a marketable appearance. Finishing work are carried out in several stages:

   1. Inspection for various defects, eliminating them: correct the uneven density of the weaving by slightly moving the rods, align the legs, cut off the tips of the rods and smooth out the unevenness with fine-grained sandpaper.
   2. Bleaching and painting. To make the product white, treat it with lime or sulfur dioxide. To give a different color use regular paint. Decoctions are also used onion peel, wolf berries, heather, alder bark or moss, if you like naturalness and environmental friendliness.
   3. Varnish coating. In order not only to preserve the texture of the material used, but also to make it even stronger, apply 2-3 layers of varnish (each subsequent after the previous one has completely dried).

   Caring for wicker and rattan products

   Wicker furniture requires special care, which is due to the characteristics of the material used: wicker and rattan can become very fragile if not used correctly.

   
   

   Wicker furniture is a rather difficult product to repair. In the event of a breakdown, it is difficult to find a repairman who will undertake the repair. That's why proper care mandatory and necessary for products made of wicker and rattan.

Today our Factory is located onstages of active development and sells its products throughout Russia and abroad. The company produces up to 3000 products per month, in our warehouses about 2000 products in stock, - we can fully be called the largest factory for the production of wicker furniture from artificial rattan in Russia.

Diplomas, Certificates from mebius Factory

Presentation about the Factory

About the range of products

The wide range of mebius wicker furniture includes chairs, armchairs, rocking chairs, tables, sun loungers, hanging chairs, lunch, coffee groups, comfortable sets for lounge areas, barbecue, which will look beautiful and dignified in a restaurant, hotel, country house, on the beach, at your favorite cottage and at home. The environmental friendliness of artificial rattan, thoughtful ergonomics, strength and durability - all this is put into each of our products with the warmth of the hands of our braiders and the love of everyone who creates furniture.

The factory produces as models from the catalog, so by designcustomer.

What is artificial rattan?

Artificial rattan is a polymer thread produced by extrusion. Under certain temperature They achieve melting of the plastic and pass it through a special hole-form. Thanks to the forming hole, a synthetic thread with a certain shape: crescent, rod, in the form of wooden bark, etc. Artificial rattan can have different colors and texture. The plastic components included in its composition comply with the environmental standard ISO9001.

How we make furniture

Quite complex artificial rattan furniture production technology mebiusrotang is a process that involves special high-tech equipment and manual painstaking work masters It is noteworthy that furniture is made from scratch, that is, production begins with a workpiece plastic tape artificial rattan and ends with a full-fledged product. The technology for producing artificial rattan tape is secret - the capsules are melted and mixed with ingredients that are known only to the manufacturer, and then rolled out like noodles into long threads on a special machine. Craftsmen make the furniture frame from hardened aluminum, then paint it. Last stage- braiding of the product blank, it is performed by craftsmen only by hand.

If you master the technology of weaving from natural or artificial materials possible without extra costs decorate your house, apartment, summer cottage plot stylish original furniture, interior items. It is not difficult to make artificial rattan furniture with your own hands; the prepared frame is braided with rattan cord or ribbons, and a pattern is created according to the chosen pattern.

What materials are used for wicker furniture?

In our region, willow vines are traditionally used for weaving; in tropical latitudes, rattan palm stems (calamus) are used. Vine is an accessible raw material, but harvesting it yourself is a rather labor-intensive process. Wicker furniture is less strong and durable compared to rattan. Natural rattan, like vines, is harvested and subjected to multi-stage processing - the stems are cleared of bark, sorted by thickness, steamed, acquired elasticity and straightened. Thick stems after this treatment can be bent, giving the shape necessary for the frame elements, and dried. Thin stems and bark are used for weaving; they are cut into fragments of the required length. It will not be possible to prepare natural rattan with your own hands - it does not grow here, and purchasing prepared raw materials, taking into account transportation costs, will be very expensive.

U natural rattan There is a synthetic analogue - polyrottan or technorattan. It is made by extruding a soft polymer through holes of different diameters and cross-sections. The material has many modifications:

• flat strip with textured surface, ribbed surface, possible imitation of tree bark;
• tape, braid with a smooth surface;
• round or oval cord;
• cord with a crescent-shaped cross-section;
• rattan rod.

Artificial rattan is more popular compared to natural rattan for a number of reasons:

• the price is significantly more affordable;
• synthetic rattan is superior to its natural counterpart in flexibility and elasticity;
• environmental friendliness and safety are not inferior to natural raw materials, does not have a specific odor characteristic of some polymers;
• polyrattan is more durable, furniture made from it can withstand significant loads without deformation;
• the furniture is moisture-resistant and frost-resistant, not afraid of changes in temperature and humidity conditions;
• furniture is easy to care for, it can be cleaned of dirt using various detergents;
• rattan strips and cords are available in any length, which allows you to weave furniture without joints;
• the raw materials are completely ready for use;
• large selection modifications different shapes, colors and textures allow you to create attractive furniture that will fit into any interior.

The disadvantages of technorattan include its relatively low rigidity, so furniture made from it necessarily needs a rigid frame. There is a risk of damaging the weave during use, and it will begin to unravel.

For light furniture that will be used in high humidity, for example, in the bathroom or under open air, it is better to use a plastic or aluminum frame rather than a wooden frame. If the furniture will be subject to significant loads, a frame made of metal or wood is preferable.

Furniture making technique

To weave artificial rattan furniture with your own hands, you need to choose a model, decide on the frame configuration and weaving pattern, draw up a project and draw a sketch of the product, and calculate the amount of material. To make a chair, 2 kg of poly rattan is enough, for a small double sofa it will take 5-7 kg, for large sofa- up to 10 kg.

It is better for beginning craftsmen to stick to regular checkerboard weaving; if you combine rattan of different colors or textures, even a simple pattern will look impressive. If you have work experience, you can choose more complex circuit, openwork weaving.

To create furniture you will need:

• a frame that you can assemble with your own hands or order a blank from a carpentry workshop or a hardware workshop;
• tape or rod for guides that are attached to the frame; a pattern will be created on them;
• ribbon, braid or cord for weaving;
• fasteners for fixing the guides to the frame;
• pins, bolts or thin strips of leather to connect parts of the finished product (if it is assembled from individual elements).

Sequence of work:

1. Assemble or buy a ready-made frame (frame elements).
2. Fix a number of guides on the base. A rod or tape is wrapped around the frame; as a rule, one turn is enough, but for reliability, several turns can be made with overlap, after which the end is attached to the base. For high-quality weaving, strong tension and density of the guides are important; it is better to connect 2-3 strips of tape and use them as one guide.

Depending on the frame material and the thickness of the rattan rod, it can be fastened with self-tapping screws using ordinary furniture stapler(to wood), pneumatic stapler with narrow short staples (to aluminum frame). The most difficult thing is to fix the guides to the steel frame made of furniture pipes. There is a way out - the frame is wrapped with rattan tape, the end is braided with an overlap, the touching fragments of the tape or rod are welded with a soldering iron with a point tip. Then the guides are welded to the base with the same soldering iron.

1. The ends of the rods extending beyond the frame are cut off construction knife, scissors or wire cutters.
2. A pattern is created on the basis of the guides in accordance with the selected pattern.
3. The weaving is constantly trimmed to ensure a neat pattern without distortions, and at the end the final alignment is carried out. The cord (tape) can be moved, compacting the rows as necessary or increasing the gaps between them; during the weaving process, alignment is done by hand; when the fabric is finished, you can use a sharpened pencil to move the tightly closed rows apart here and there.
4. The ends of the cord are fixed with a stapler or soldering iron to the base from the inside out, the excess is cut off.
5. The frame itself, legs and similar elements are braided; this is useful for pulling the tape special tool with a curved tip.
6. If the product consists of several elements, they are connected after each is braided with rattan, after final assembly the ends are masked.
7. If desired, finished furniture can be painted with acrylic spray paint, but a sufficient selection of technorattan colors allows you to do without additional painting.

You can make it easier to pull the tape or cord between the guides and avoid scratches and abrasions by wiping the weaving material with a solution soaked in vegetable oil a piece of rag.

It is better to create complex rattan furniture (for example, a sofa) in the following sequence: first, the frames of individual elements are braided - the back, the seat, the sides and armrests, and then they are connected to each other with bolts or another method. To seat a large area, it is necessary to attach longitudinal and transverse stiffening strands made of dense nylon tape to the frame before starting weaving.

Today we will talk about an artificial rattan substitute (also called technorattan or polyrattan), which is used to make wicker furniture. This material is supplied in the form of multi-colored ribbons, threads, circle segments, rolled into coils. Unlike its natural counterpart, artificial rattan does not fade under the influence of ultraviolet radiation and is highly resistant to adverse conditions. weather events. Therefore, I often make street furniture or wicker from it. decorative items, which can be left outside all year round in snow and rain.

Many owners suburban areas Would like to put furniture made of this material in a gazebo or recreation area. But it stops high price for these products, which are considered a “handmade” product. Exactly money issue pushed user FORUMHOUSE with nickname Lulava master artificial rattan weaving and all the intricacies of this craft in order to equip the living room in your house near Moscow with a beautiful and functional furniture, where you can sit and relax on long winter evenings.

Lulava FORUMHOUSE Member

After searching, I found wicker furniture that I really liked. Having caught fire with the purchase, I cooled down when I saw the price tag, but the desire to have something like that overpowered me. After studying the Internet, I made a firm decision - to start make wicker furniture yourself.

And here are samples of furniture that the user liked.

Now let’s announce the price tag for it: the chair costs 45 thousand rubles, corner sofa- 124 thousand rubles. No wonder that Lulava I ordered 26 kg of technorattan - strips 9 mm wide and 1 mm thick.

Artificial rattan is sold in kilograms. This ratio of width and thickness, as indicated above, ultimately gives maximum length coils at a given weight, which allows you to save money.

Also, according to the user, if you make a rattan sofa or chair with your own hands with a platform used as a self-supporting one, then it is better to use a more durable poly rattan, in the form of a circle segment, 1.2-1.4 mm thick, although artificial rattan 1 mm thick has sufficient strength and load-bearing capacity.

Work should begin with choosing a base that will be braided with rattan ribbons. One of these options could be a metal frame made of galvanized or aluminum pipes. But Lulava I settled on the most technologically advanced option - a wooden one, made from a block with a cross-section of 4x4 cm, which is then treated with antiseptic impregnations.

Rattan weaving for beginners: nuances

The most difficult thing in making furniture from artificial rattan is the weaving process itself. Despite the many training videos on the Internet, it is not always possible to see the nuances of the technology. Not enough information. Therefore, the user had to comprehend a lot by trial and error.

Start weaving rattan furniture from the simplest products. This will prevent you from “burning out” ahead of time, and also from losing interest in your work. And only after you have “filled your hand”, move on to more important subjects.

Lulava

I started the weaving work with an ottoman. Moreover, I had to redo it 3 times until I understood how to do everything correctly. Then I moved on to making the frame - the base of the sofa. To do this, I took the dimensions of the Swedish analogue - 2240 (length) x 660 (height) x 860 (width) mm.

Design wooden frame shown in the following photo.

The assembly was carried out on the “75th”, so-called. "black" screws. Although such fasteners are not the most the best option to connect critical structures (the heads of self-tapping screws can be cut off), the main thing is to think about how the load will be distributed.

The armrests of the sofa should not “hang” in the air. The part must rest directly on the load-bearing frame, and the main load is redistributed onto it. Self-tapping screws are needed only to fix the armrest - to connect it to the base in the desired position and prevent shifting.

When weaving artificial rattan, it is important to remember that one wrong stitch made at the very beginning will lead to a defective product. Everything will have to start over. Making furniture from polyrattan is the lot of attentive and patient people.

Lulava

It is most convenient to work by placing the furniture on a stand. Even after watching the video with master classes on weaving, I still have questions about the secrets of the work. I had to learn everything from my own experience.

We will need the following tools for weaving:

• Stapler - it is necessary for fixing polyrattan strips with staples to wooden base;
• Small pliers, with their help it is convenient to remove a bent staple;
• A light weight hammer, needed for finishing off staples;
• Knife or cutter;
• Soldering iron or superglue.

A soldering iron is needed to solder the lock - at the junction of the strips.

Interesting practical advice on working with technorattan. We assemble the frame with maximum geometric accuracy. Misalignments or inaccuracies in measurements may result in more stitches being required on one side than the other, or gaps remaining.

According to Lulava, not important– length of the sofa, width of the armrest, because The pitch of the vertical threads can be changed.

But especially important– the height of the sofa, the length of the armrest and the height of the sofa from the front side (from the seat to the bottom edge).

We carry out the weaving itself without using a shuttle, because Poly rattan is a tough material and can be pulled through rows well. Using a shuttle will only complicate the work of threading it between the strips.